8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 1/6

Replacing flywheel and clutch - Vw Golf Mk 5Tools for clutch replacement:

1. VW 3067: Flywheel holding tool

2. VW 3190A: Clutch disk centering tool

3. VW T10027: Tool for adjusting the gear selector 

Note: This one is not required for the flywheel/clutch replacement.

4. A transmission jack.

5. An engine support.

8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 2/6

Other tools needed:1. Socket M21 (to unbolt the sub-frame bolt)2. Torque wrench (up to 80 ft-lb/100 Nm)3. Sockets: M18 deep (to unbolt the starter)4. Triple Square Socket M12 (to unbolt the flywheel)5. Triple Square Socket M8 (to unbolt the axles)6. Allen Socket M5 (to unbolt the air filter box)7. Socket M9 twelve points (to unbolt the pressure plate)

8. Sockets: TORX 20 and TORX 30 (to remove belly pan and lower right cover)9. Sockets: M10, M13, M16, M17, M1810. Spring clamp removal tool11. Jack stands12. Hydraulic jack (to support the differential) + factory jack (to move the engine away fromthe subframe)13. Bungee ropes to hang the unbolted drive axles and few other things14. Philips screwdriver 15. Rubber mallet

OPERATIONS :

1. Disconnecting battery:

8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 3/6

Ground first .... (M10)

2. Remove Top engine cover:

Pull up the engine cover 

8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 4/6

8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 5/6

8/19/2019 Ambreiaj Golf 5

http://slidepdf.com/reader/full/ambreiaj-golf-5 6/6