Aluminium extrusion dies cleaning and spent caustic soda ...
2
The advantages brought by the integration of DIE-CLAR (an innovative system for the cleaning of dies used in aluminium extrusion industry) and CRYSTALFIX (the most updated technology for the recovery of caustic soda used in the process of dies pickling) have been successfully proven by Italtecno on the field. With an INTEGRATED DIE-CLAR & CRYSTAL- FIX SYSTEM all the advantages connected to each individual technology are summed to- gether and provide a total answer to the problems caused by the conventional dies pickling systems: • Fully automatic operations, from dies cleaning sequence to spent caustic soda recovery • Highly environmental friendly process • Total enhancement of safety for workers • Recovery of aluminium metal • Recovery of caustic soda • No spent toxic/hazardous waste to be di- sposed or to be treated This integrated approach to dies cleaning, can be additionally enhanced by implemen- ting a mechanical aluminium detachment pre-treatment. INTEGRATED DIE-CLAR & CRYSTALFIX SYSTEM Aluminium extrusion dies cleaning and spent caustic soda recovery Engineering Division Plants Engineering Division Engineering Division
Transcript of Aluminium extrusion dies cleaning and spent caustic soda ...
The advantages brought by the integrationof DIE-CLAR (an innovative system for thecleaning of dies used in aluminium extrusionindustry) and CRYSTALFIX (the most updatedtechnology for the recovery of caustic sodaused in the process of dies pickling) havebeen successfully proven by Italtecno on thefield.
With an INTEGRATED DIE-CLAR & CRYSTAL-FIX SYSTEM all the advantages connected toeach individual technology are summed to-gether and provide a total answer to theproblems caused by the conventional diespickling systems:
• Fully automatic operations, from diescleaning sequence to spent caustic sodarecovery
• Highly environmental friendly process• Total enhancement of safety for workers• Recovery of aluminium metal• Recovery of caustic soda• No spent toxic/hazardous waste to be di-
sposed or to be treated
This integrated approach to dies cleaning,can be additionally enhanced by implemen-ting a mechanical aluminium detachmentpre-treatment.
INTEGRATEDDIE-CLAR & CRYSTALFIX
SYSTEM
Aluminium extrusion dies cleaning and spent caustic soda recovery
Engineering Division Plants E n g i n e e r i n g D i v i s i o nE n g i n e e r i n g D i v i s i o n
ITALTECNOVia Marinuzzi, 38 - 41100 Modena (Italy) - Tel. +39 059 280362 - Fax +39 059 280462Internet: http://www.italtecno.com - E-mail: [email protected]
Engineering Division PlantsE n g i n e e r i n g D i v i s i o n
Die afterextrusion
beforecleaning
A.D.P.Aluminium Detachment Pretre-
atment
50%-70% RECOVERY OF ALUMINIUM METAL
DIE BEFORE FINAL CLEANING
DIE-CLAR processd i e c l e a n i n g w i t h a l u m i n i u m r e c o v e r y
SAVE METAL SAVE MONEYNO FUMES FULLY AUTOMATIC
EXAMPLE OF DIE AFTER FINAL CLEANING
™
CLOSED LOOP WITH RECOVERY OF CAUSTICSODA (DISPOSAL OF ALUMINIUM HYDROXIDE)
Crystalfix
AUTOMATIC DIES CLEANINGWITHOUT TOXIC FUMES
