All Courses are Recognized by Ministry of Human …bsates.com/pdf/baba-prospectus-2013.pdfAll...

All Courses are Recognized by Ministry of Human Resource Development,Govt. of India

Applicable for Higher Education & Central/State Government Jobs.

www.bsaitm.in

BSAITMNEW DELHI

TM

• Established in 1995....

• Covered Area : 70000 sq. Fts.

• Centrally Air-Conditioned

• 28 State-of-the-Art Laboratories

• 2 Research Laboratories

• 52 Highly Qualified Faculty Members

• Ultramodern Facilities

• 172 Centres all over India

S No. Particulars Page No.

1 Organisation Structure 3

2 Messages 4

3 About the Institution 5

4 Recognitions 6

5 Objectives of BSATES 7

6 Values 8

7 Philosophy 9

8 Industry Sponsored Programmes 10

9 Lateral Entry / Exemption / Credit System 11

10 Department of Mechanical Engineering 13

11 Department of Electrical Engineering 25

12 Department of Civil & Architecture Engineering 29

13 Department of Information Technology 45

14 Department of Business Studies 49

15 Department of Paramedical Science 54

16 General Instructions 57

17 Rules & Regulations 59

18 Recognition Letters 61

19 Form in-end

Contents

Vikaspuri, New Delhi-110018

Telephone No. of the Institution office / Official

Chairman’s Secretariat Tel.: 011-28532966

Fax : 011-28532966 Principal 011- 28532959

Academic Section Tel.: 011 – 28532901 Finance Branch Tel.: 011 – 28532901

Student Relationship 011- 28532959 Finance Officer 011- 28532959

Manager

Examination Branch Tel. : 011 – 28532901 Information and Tel.: 011 – 28532901

Guidance Cell: 011- 28532959

Executive Officer 011- 28532959

(Evaluation)

Helpline 1 : +91 9873000679

Helpline 2 : +91 9718000679

Administrative Branch Tel.: 011 – 28532901

Baba Saheb Ambedkar Technical Educational Society

Organisation Structure

Chairman

Dr. J.Dasgupta Ph.D.

Vice-Chairman

Capt. Kuldeep Singh Dalal (Master Mariner)

www.bsaitm.in • 03

Dear Students,

Greeting from Baba Saheb Ambedkar Technical Education

Society!!!

I welcome you to the family of students in Baba Saheb

Ambedkar Technical Education Society (BSATES), which was established in

the year 1995 for the promotion of Education among all section of society. Without the constraints of space and

time, Baba Saheb Ambedkar Technical Education Society has established its quality and has reached the unreached

specially the deprived and disadvantage groups of the Society . As inscribed in its motto “Skill Competency to All,

Everywhere” the Institution has set itself an objective to equip its students not only with the technical knowledge of

their Vocation to develop their Skills but also the willingness to succeed which make them Competent in the modern

arena of Industrialization. The programs are very carefully chosen which are innovative and relevant to the society

well recognized by all Government competent Authorities and valid for higher education & central/state Govt. jobs

in PSUs and are offered with moderate cost and modern facilities. All the programs are aimed both for aspiring

students as well as for the working professionals. Flexible mode to teaching represents a major element of our

programs. The contact programmes are conducted regularly with the involvement of experienced staff and

expertise in the concerned fields is tapped for the benefit of the students, periodically. We are proud to announce

that till last year the enrolment was more than 5000.

BSATES aims to be India’s most progressive Institution. We strive to produce highly employable professionals of

highest possible quality in areas of strategic importance. The Institution is already working in Association with

Ministry of Science & Technology, Govt. of Bihar, Department of Employment & Training, Govt. of Uttar Pradesh,

Department of Training & Technical Education, Govt. of Delhi and is participating in various Grant-in-Aid

programmes of Govt. of India and various States Governments.

On behalf of the Society and the Institution, I invite your participation, in realizing a dream of making this Nation, a

knowledge intensive society. I believe that – If the interest and talent of students are carefully interwoven with the

facilities provided, it will bring a tapestry of change in the working skills and standards of competency in coming

years dedicated to our country

With best wishes for your career,

Sincerely Yours,Dr. J. Singh

Message from the desk of

Chairman

04 • www.bsaitm.in

Baba Saheb Ambedkar Technical Educational Society (a

Society with National Presence) was established in 1995 by group of

professionals dedicated for the upliftment of disadvantage groups of the

Society. It recognizes not only the reserved groups Scheduled in the Constitution of India but

also includes women, candidates below Poverty Line who are unable to pursue formal education in urge to earning

their livelihood, Wards of Deceased Army and Police personnel, Wards of Widows and specially the School Dropouts.

The institution has always emphasized on Professional, Technical and Para Medical Education so that we

can built a work force equipped with technical knowledge and craftsmen skills in a very short span of their lives.

Apart from the Vocational courses, the Institution has also introduced Professional and Courses on Applied Sciences

as per the demand of the growing Market. All the Formal and Informal Courses are recognized by Government of

India.

The Institution has also join hands with India can (a Pearson Educomp Co.), a famous International name in

English Language studies and Personality Development, so that the students may get an added advantage in the job

market. The Institution has setup all State-of-the-Art Laboratories and very experienced faculty members so that the

students can achieve the best scores in terms of success in their professional life.

The programs are very carefully chosen which are innovative and relevant to the society and are being

offered with moderate fee yet modern facilities. All the programs are aimed both the aspiring students as well as the

working professionals. Flexible mode of teaching represents a major element in our programs.

The Institution has also introduced “Industry Sponsored Courses” wherein the students will be trained as

per the requirement of the specific Industry and will be practically trained in the concerned Industry itself. After

passing out from the course, they will be appointed in the concerned Industry.

The Institution strive to produce highly employable professionals of highest possible quality in areas of

strategic importance, that would not only benefit the students but would also fuel India’s growth towards a

developed economy.


about theInstitution


1. The Institution is a Patron Member of Institution of

Mechanical Engineers (India), Mumbai for Diploma

and Degree level Engineering courses. IME(I) is

recognized by Ministry of Human Resource Development

(MHRD), syllabi approved by All India Council for Technical Education (AICTE) ; www.imeindia.in

2. The Institution is a Student Chapter Institution Member of Institution of Civil Engineers (India), Ludhiana for

Diploma and Degree level Engineering courses. ICE(I) is recognized by Ministry of Human Resource

Development (MHRD), syllabi approved by All India Council for Technical Education (AICTE) ; www.ice.net.in

3. Life Organization member of IETE - The Institution of Electronics & Tele Communications Engineers (India)

conducting Diploma and Degree Courses in Electronics & Telecommunication Engineering and Computer

Science & Engineering Recognized by MHRD Govt. of India and syllabi approved by AICTE : www.iete.org

4. The Institution is Recognized by National Council for Vocational Training (NCVT) under Craftsman Training

Scheme (CTS) of Directorate General of Employment & Training, Ministry of Labour & Employment, Government

of India; www.dget.nic.in

5. The Institution is Recognized by State Council for Vocational Training (SCVT) under Craftsman Training Scheme

(CTS) of Board of Technical Education, Government of NCT of Delhi ; www.tte.delhigovt.nic.in

6. The Institution is Recognized as a Vocational Training Provider (VTP) for Modular Employable Skills, approved

by NCVT, Government of India ;

www.dget.gov.in/mes

7. The Institution is an Institutional Member of Quality Council of India (QCI), Government of India; www.qcin.org

8. The Institution is an Institutional Member of prominent Industry Association and Industrial Bodies like FICCI, CII,

ISTD, ISTE.

Recognitions

Baba Saheb Ambedkar Technical Education Society came into being to achieve the following objectives:

1. To ensure that the quality education reaches one and all in the society specially the deprived and

disadvantage groups of the Society.

2. To play a pivotal role in taking technical education to the bottom of the pyramid to ensure that they

are provided with an opportunity to get quality education at affordable cost and get a chance to

bring themselves to the mainstream of the society.

3. To coordinate and bring the syllabus, pedagogy and expertise of different boards and Universities

under one roof so that students could be given an opportunity to choose from a wide range of

subjects and options which would enable them to learn and then perform in their respective area

of interest.

4. To run employment oriented course which give all the students a chance to secure employment in

their respective areas of expertise.

5. To provide an opportunity of different modes of study (Face to Face, Part–Time, Distance Learning)

so that not only students but professional also could learn and grow. It would also provide an

opportunity to learners to learn at one’s own pace and place.

6. To provide access to higher education and/or technical education to all those who seek it with an

attempt to democratize the education by taking it to the doorsteps of the learners.

Objectives of BSATES


Values


The Institution System is guided in fulfilling its

mission by these shared principles and core

Learning : The Institution fosters an environment that

promotes a life of learning for its constituents and uses feedback from its

participants and supporters to improve the quality of its teaching, learning, and support.

Quality : The Institution holds a strong commitment to high standards in all aspects of its educational

activities, learning outcomes, and support services. It seeks to continuously strengthen the overall

effectiveness of its operations.

Integrity : The Institution conducts its operations and makes its public representations in an ethical

manner. It assesses its operations in an open and collaborative manner and practices fairness, honesty, and

objectivity in dealing with its constituencies.

Diversity : The Institution embraces and promotes diversity in its policies and practices to prepare its

learners to live and work successfully in an increasingly diverse society. It strives to create diverse learning

environments by welcoming teachers, learners, and staff that bring diverse ideas, values, backgrounds,

and beliefs to the learning and work environment.

Freedom of Inquiry and Expression : The Institution supports the rights of its constituents to freely inquire

and express their opinions. It engages and encourages an open exchange of ideas and seeks input from all

who wish to participate in its learning programs.

Accountability : The Institution is accountable to its constituencies and the public for fulfilling its mission in

an appropriate manner by openly assessing its operations and by inviting external evaluations by public

agencies.

Adaptive and Responsive : The institution anticipates and adapts to its changing environment and

responds to the needs of the organization and its constituencies in manners both appropriate and timely.

Innovation : The Institution seeks imaginative and effective solutions to its challenges and innovative ways

to fulfill its mission.

Values

Philosophy


Practical & Training Work

Assignment

The Institution has its own set up of State-of-the-art laboratorie,

The Work Center will provide Practical Counseling to t h e l e a r n e rs .

Apart from the well equipped laboratories, the Institution has arrangements with various Industrial Units

where Practical Training will be provided to the students. The Final Project will be prepared under the

supervision of AICTE Approved college which is Associated with the Institution.

Students are required to submit assignments according to the prescribed schedule before the term-end

examination. In case, the student has not submitted the assignment within the prescribed date, the result

of such candidate will not be declared.

This is a special feature of our academic curriculum,

which had been introduced from the 2011~12

academic session. We would roll out a few courses

where the training period during the academic session would

be on the live projects in industry. After finishing the course the students would get an opportunity to be

hired by the company that they did their training in, depending on their performance during the training.

These courses have been approved by the industry and would give a chance to all the students enrolled

under these programs to be hired by the reputed organizations in the industry. The course contents of

these courses have been approved by eminent academicians in respective fields.

We are an institute that not only professes about running employability enhancing courses, but also

provides placements opportunities, we proudly declare that it’s another feather in our cap.

The Industry Sponsored Programme Fees for any course will be Rs.10000/- (Rupees Ten Thousand Only)

which is to be paid extra apart from the actual programme fees, registration fees, eligibility fees, library

fees, industrial training and industrial visit fees and personality development fees etc.


Industry Sponsored Programmes

Lateral Entry/Exemption/Credit System


Lateral Entry/ Exemption:

1. Students who have passed Diploma in c o n c e r n e d

branch of Engineering from State/Central Govt. recognized Technical

Board / Institution / University or Three Year B.Sc. in any stream with subject as Mathematics shall

be allowed direct admission in 2nd year i.e. (III semester) of Degree Engineering Course.

2. 12th Technical or I.T.I or M.C.V.C or N.C.V.T (should be 2 Years) or equivalent can join any branch in

the 2nd year (III semester) of Engineering Diploma irrespective of their branch.

3. Exemptions may be granted in paper(s) or semester(s) depending on the subject(s) cleared by the

candidate by actually passing of the subject(s) and successfully completing the exam, which

include those subjects from the recognized Institution / Colleges / University. Exemptions if eligible

are not to be taken for 'granted' but must be asked for while submitting the Registration and Exam

form along with the attested copies of relevant certificates, mark sheets and exemption fee.

Exemptions granted will be shown only in the mark list of the examination sent to the candidate. No

separate individual intimation will be given.

4. More details of Lateral Entry qualification may be confirmed by logging –in our website :

www.bsaitm.in. However, Lateral Entry qualification can be confirmed by the Admission officer/

Executive officer in person also.

5. The Lateral Entry Fees for any course as mentioned against each course structure to be paid extra

apart from the actual programme fees, registration fees, eligibility fees, library fees, industrial

training and industrial visit fees and personality development fees etc.


Mode of Delivering Classes : Theory & Practical

The Institution shall follow a Flexi system that

is based on the time factor involved in studying.

The main emphasis of the Institution is to make the p r o g r a m m e s

affordable to all sectors of aspiring candidates. The training mode has been differentiated in 2

modes :

1. Face to Face Mode

In Face to Face mode, one credit is equivalent to 30 study hours inclusive of all learning activities.

Different programmes have different credit requirements. Students have the right to collect credits

at their own pace, convenience and according to their own capability. The classes will be conducted

regularly either in the morning session or in the evening session five days a week. However, for

working executives and professionals classes may be conducted on Weekends also.

2. Distance Mode

In Distance mode, the classes will be conducted either in the weekends or full time classes will be

conducted in the last month of the academic session. The minimum compulsory attendance will be

85%.


Mechanical EngineeringMechanical Engineering

Mechanical engineering is a discipline of

engineering that applies the principles of physics and

materials science for analysis, design, manufacturing,

and maintenance of mechanical systems. It is the branch of engineering that involves the production and

usage of heat and mechanical power for the design, production, and operation of machines and tools. It is

one of the oldest and broadest engineering disciplines.

The engineering field requires a vast understanding of core concepts including mechanics,

kinematics, thermodynamics, materials science, and structural analysis. Mechanical engineers use these

core principles along with tools like computer-aided engineering and product lifecycle management to

design and analyze manufacturing plants, industrial equipment and machinery, heating and cooling

systems, transport systems, aircraft, watercraft, robotics, medical devices and more.

Mechanical engineering emerged as a field during the industrial revolution in Europe in the 18th

century; however, its development can be traced back several thousand years around the world.

Mechanical engineering science emerged in the 19th century as a result of developments in the field of

physics. The field has continually evolved to incorporate advancements in technology, and mechanical

engineers today are pursuing developments in such fields as composites, mechatronics, and

nanotechnology. Mechanical engineering overlaps with aerospace engineering, civil engineering,

electrical engineering, and petroleum engineering to varying amounts

Mechanical Engineering



DEGREE AND DIPLOMA COURSES in

Recognized & Approved by :

MINISTRY OF HUMAN RESOURCE DEVELOPMENT

(MHRD)

•

ALL INDIA COUNCIL FOR TECHNICAL EDUCATION

(AICTE)

•

UNION PUBLIC SERVICE COMMISSION

(UPSC)

•

GRADUATE APTITUDE TEST IN ENGINEERING

(GATE)

Mechanical EngineeringMechanical Engineering

Awarded by The Institution of Mechanical Engineers (India)

Hasmukh Bhavan,Behind CIDCO Office, Near Hiranandani Park,

Kharghar, Navi Mumbai - 410 210.

(For working Professionals)

Minimum Duration : 3 Years

Eligibility : A Pass in 10th Standard with English, Science & Mathematics

1st Semester

2nd Semester

3rd Semester

Code Course Title

TE1.1 Communication Skills

TE1.2 Engineering Mathematics – I

TE1.3 Applied Physics

Code Course Title

TE1.4 Applied Chemistry

TE1.5 Engineering Mathematics II

TE1.6 Computer Applications

Code Course Title

TE2.1 Applied Mechanics

TE2.2 Electrical Technology

TE2.3 Engineering Graphics

TE2.4 Strength Of Materials

TE2.5 Theory Of Machines


Diploma in Mechanical Engineering (T.Engg.)

4th Semester

5th Semester

6th Semester

Code Course Title

TE2.6 Manufacturing Processes

TE2.7 Thermal Engineering

TE2.8 Industrial Organization & S M

TE2.9 Fluid Power

TE2.10 Workshop Practice

Code Course Title

TE2.11 Machine Design

TE2.12 Metrology and Quality Control

TE2.13 Production Technology

TE2.14 Refrigeration & Air-Conditioning System

TE2.15 Automobile Manufacturing System

PR3.1 Project Work

After completion of theory papers, students have to

undergo at least three months mandatory

Apprenticeship/ Practical Training at any AICTE

recognized polytechnic for award of Technician

Engineers Certificate


*Note : For the candidates applying for lateral entry directly in the Semester-3 require to pay

the Composite Fees of Rs. 7050/- along with Board fee of Rs. 16025/-.

All students are liable to pay the following Project Fees to the Board (payable at 6th

Semester)

Project Approval Fees : Rs. 11500/-

Semester wise Fee Structure

Board Fees

Program / Tuition Fees Rs. 25000/-

Examination Fees Rs. 3000/-

BSAITM Registration, Industry Seminar, Guest Lectures and Visits

(At the time of Admission only) Rs. 5500/-

a) At the time of Admission (Board Fees) 16025/-

b) Composite Fees (payable at 3rd Semester) 7050/-*

c) Certification Fees (payable at 6th Semester) 2750/-


Degree in Mechanical Engineering (C.Engg.)

Awarded by The Institution of Mechanical Engineers (India)

Hasmukh Bhavan,Behind CIDCO Office, Near Hiranandani Park,

Kharghar, Navi Mumbai - 410 210.



Eligibility : A Pass In 10+2 level examination with English, Physics, Chemistry, Maths or a pass in

T. Eng, Part-I of the Institution’s examinations

1st Semester

2nd Semester

3rd Semester

Code Course Title

TE2.1 Applied Mechanics

TE2.2 Electrical Technology

TE2.3 Engineering Graphics

TE2.4 Strength Of Materials

TE2.5 Theory Of Machines

Code Course Title

TE2.6 Manufacturing Processes

TE2.7 Thermal Engineering

TE2.8 Industrial Organization & S M

TE2.9 Fluid Power

TE2.10 Workshop Practice

Code Course Title

TE2.11 Machine Design

TE2.12 Metrology and Quality Control


TE2.13 Production Technology

TE2.14 Refrigeration & Air-Conditioning System

TE2.15 Automobile Manufacturing System

Code Course Title

A 1 Introduction to Manufacturing Process

A 2 Ad Electrical Technology

A 3 Mechanics

A 4 Fundamental of Computer

A 5 Advance Engineering Mathematics

Code Course Title

A 6 Thermodynamics

A 7 Fluid Mechanics

A 8 Society, Environment, Engineering

A 9 Dynamics

A 10 Adv Mat Sc & Metallurgy

Code Course Title

A 11 Heat Transfer-I

A 12 Theory of Machine

Code Course Title

BC 1 Environmental Engineering

BC 2 Computer Graphics

BC 3 I.C. Engines & Automobile Engineering

4th Semester

5th Semester

6th Semester

7th Semester


BC 4 Operation Research

BC 5 Advance Strength of Materials

Code Course Title

BC 6 Industrial Economics & Management

BC 7 Mechanical Measurements

BC 8 Hydraulic Machines

Optional In addition to 3 compulsory subjects, Semester-8

students are required to appear and pass in 3

optional subjects

BO 1.1 Refrigeration & Air- Conditioning

BO 1.2 Metal Cutting & Tool Design

BO 1.3 Jigs & Fixture Design

BO 1.4 CAD/ CAM (Application ) & Automation

BO 1.5 CNC Programming

BO 1.6 Meteorology & Quality Control

BO 1.7 Management of Technology

BO 1.8 Machine Vibration Analysis

8th Semester


*Note : For the candidates applying for lateral entry directly in the Semester-4 require to pay

the Composite Fees of Rs. 8050/- along with Board fees of Rs. 16025/-.

**Note : For the candidates applying for lateral entry directly in the Semester-7 require to pay

the Composite Fees of Rs. 9150/- along with Board fees of Rs. 16025/-.


Semester)




Board Fees





a) At the time of Admission (Board Fees) 16025/-

b) Composite Fees (payable at 4th Semester) 8050/-*

c) Composite Fees (payable at 7th Semester) 9150/-**

c) Certification Fees 3750/-


Civil & Architectural EngineeringCivil & Architectural Engineering

Civil & ArchitecturalEngineering


Civil engineering is one of the oldest of the

engineering professions. Ancient feats such

as the building of the Egyptian pyramids and

Roman road systems are based on civil engineering principles.

Civil engineers can be found in all areas of society from small private contractors to

municipal agencies, federal government organizations, and the military. One of the

largest civil engineering organizations in the United States is the Army Corps of

Engineers, which despite its name is a primarily civilian organization focused on the

development of canals, locks, and dams; flood control, and other public works

projects.

Because civil engineering focuses on the study of structural systems, the core courses

in a civil engineering curriculum reflect this. Most civil engineers start their learning

with basic physics and calculus courses. Later courses can include geology, soil

mechanics, and design of steel structures. A civil engineering curriculum is usually

rounded out with advanced classes that match the student's desired specialty, which

may hydrology, development of concrete structures, and highway design, among

other specialties.

Recognised by

Diploma in Civil Engineering (T.Engg.)


Sl.No. Ministry/Organisation Reference No. & Date

1 Ministry of Human Resource No. F.24/1/2007-TS.III DatedDevelopment, Department of 06.11.2007.Higher Education, Govt. of India.

2 All India Council for Technical Education No. Eqvi./AB/Gen.Corr./2008-09(AICTE) Dated 16.09.2008.

3 Government of National No. 1(1)/2008-DD/SB/1520 Capital Territory of Delhi. /5609 Dated 29.10.2008.

4 Distance Education Council, Indira No. DEC/ICE/08/7901 Dated Gandhi National Open University, Delhi 25.04.2008

5 Association of Indian Universities No. EV/III (366)/2008/71(AIU). Dated 11.04.2008.

6 Union Public Service Commission No. F.2/1/2007-EIB Dated (UPSC), New Delhi. 30. 06.2009.

7 GATE GATE by National CoordinatingBoard-Gate, Deptt. of Education,MHRD, GoI..

8 Government of Goa. No.12/11/87-PER/Vol.II Dated06.03.2008.

9 Directorate of Technical Education, Haryana No. 351-53/Dev. Dated 13.06.2008.

10 RITES Limited No. RITES/RI/RCED/Misc/2008(A Govt. of India Enterprises). Dated 14.07.2008.

11 Delhi Development Authority. No. F 7(98)2008/PBI/2399 Dated20.08.2008.

12 IRCON International Limited No. IRCON/HRM/31/28/728 Dated(A Govt. of India Undertaking). 01.09.2008.

13 Directorate General Border Roads, No. 13616/Gen/Rect /DGBR/New Delhi 97/E1A Dated 21.10.2008.

14 Government of Andhra Pradesh. No. 10232/EC.2/2008-02 Dated05.11.2008.

15 Administration of Daman & Diu (UT). No. 10.2 (PART-IV) EST-GP/200809/797 Dated 11.11.2008

16 Government of Kerala. No.3946/GI/08/H. Edn Dated08.07.2008.

17 CPWD- Central Public Government of India. No.A-12021Works Department, /1/2006-EC VI/74-75 Dated

19.01.2009.

18 Visvesvaraya Technical University No. VTU/Aca/OS-GC/2009-10/2118Karnataka Dated 4.06.2009

19 Government of Nagaland. No. IT/10-1/04 Dated 30th July,2009

20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 DatedGarhwal 06.09.2009.

21 Government of Chhattisgarh, Department of Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.Science & Technology, Mantralaya, D.K.S Bhavan, Raipur

22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.Industrial Training, Punjab

23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated (A Government of India Enterprises) 10.08.2010

24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated(A Government of India Enterprises) 12.08.2010

25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated20.08.2010

26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010Section, Tel Bhawan, Dehradun

27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 DatedTamil Nadu 07.01.2011

Career House, East Park Road, Karol Bagh, New Delhi-110005




1st Semester

Code Course Title

TC1.1 Basic Civil Engineering

TC1.2 Technical Writing

TC1.3 Engineering Physics & Applied Mechanics

2nd Semester

Code Course Title

TC1.4 Engineering Mathematics

TC1.5 Engineering Drawing

TC1.6 Engineering Chemistry

Awarded by The Institution of Civil Engineers (India)


3rd Semester

Code Course Title

TC2.1 Surveying

TC2.2 Fluid Mechanics & Machinery

TC2.3 Soil Mechanics

4th Semester

Code Course Title

TC2.4 Mechanics of Solids

TC2.5 Basic Structural Design

TC2.6 Environmental Engineering

5th Semester

Code Course Title

TC2.7 Construction Technology

TC2.8 Estimation, Costing & Specifications

TC2.9 Civil Engineering designs

6th Semester

PR3.1 Project Work

After completion of theory papers, students have to undergo at

least three months mandatory Apprenticeship/ Practical Training at

any AICTE recognized polytechnic for award of Technician Engineers

Certificate


Semester wise Fee Structure for Lateral Entry Candidates

Board Fees





a) At the time of Admission (directly to 3rd Semester) Rs. 14250/-

b) Composite Fees (payable at 4rd Semester) Rs. 15500/-

c) Examination Fees for Qualifying Exam for ITI Holders Rs. 4000/-

d) Exemption Examination Fees (per subject) Rs. 500/-

e) Certification Fees (payable at 6th Semester) Rs. 2500/-

f) Annual Subscription Fees Rs. 500/-

*Note : Candidates applying for lateral Entry directly in Semester III will follow the following

fee structure

All students are liable to pay the following Project Fees to the Board (payable at 6th Semester)



Board Fees




(At the time of Admission only ) Rs. 5500/-

a) At the time of Admission Rs.14250/-


c) Certification Fees (payable at 6th Semester) Rs. 2500/-

d) Annual Subscription Fees Rs. 500/-


Diploma in Architectural Engineering (T.Engg.)

Recognised by



1 Ministry of Human Resource No. F.24/1/2007-TS.III DatedDevelopment, Department of 06.11.2007.Higher Education, Govt. of India.















16 Government of Kerala. No.3946/GI/08/H. Edn Dated08.07.2008.

17 CPWD- Central Public Government of India. No.A-12021Works Department, /1/2006-EC VI/74-75 Dated

19.01.2009.


19 Government of Nagaland. No. IT/10-1/04 Dated 30th July,2009





20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 DatedGarhwal 06.09.2009.

21 Government of Chhattisgarh, Department of Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.Science & Technology, Mantralaya, D.K.S Bhavan, Raipur

22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.Industrial Training, Punjab

23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated (A Government of India Enterprises) 10.08.2010

24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated(A Government of India Enterprises) 12.08.2010

25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated20.08.2010

26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010Section, Tel Bhawan, Dehradun

27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 DatedTamil Nadu 07.01.2011



2nd Semester

Code Course Title

TA1.4 Engineering Mathematics

TA1.5 Engineering Drawing

TA1.6 Engineering Chemistry

1st Semester

Code Course Title

TA1.1 Basic Architectural Engineering

TA1.2 Technical Writing

TA1.3 Engineering Physics & Applied Mechanics

3rd Semester

Code Course Title

TA2.1 History of Architecture

TA2.2 Free Hand Drawing & Painting

TA2.3 Building Construction

4th Semester

Code Course Title

TA2.4 Structural Mechanics

TA2.5 Theory of Structures

TA2.6 Estimation & Costing

5th Semester

Code Course Title

TA2.7 Surveying & Levelling

TA2.8 Architecture Designs & Graphics

TA2.9 Building Material & Science

6th Semester

PR3.1 Project Work

After completion of theory papers, students have to undergo at

least three months mandatory Apprenticeship/ Practical Training at

any AICTE recognized polytechnic for award of Technician Engineers

Certificate



Board Fees





a) At the time of Admission (directly to 3rd Semester) Rs. 14250/-


c) Examination Fees for Qualifying Exam for ITI Holders Rs. 4000/-

d) Exemption Examination Fees (per subject) Rs. 500/-

e) Certification Fees (payable at 6th Semester) Rs. 2500/-

f) Annual Subscription Fees Rs. 500/-

*Note : Candidates applying for lateral Entry directly in Semester III will follow the following

fee structure


Semester)

Project Approval Fees : Rs.8500/-


Board Fees





a) At the time of Admission Rs. 14250/-





Recognised by

Degree in Civil Engineering (C.Engg.)



1 Ministry of Human Resource Development, Department of 06.11.2007.Higher Education, Govt. of India.















16 Government of Kerala. No.3946/GI/08/H. Edn Dated 08.07.2008.

17 CPWD- Central Public Government of India.No.A-12021Works Department, /1/2006-EC VI/74-75 Dated 19.01.2009.


19 Government of Nagaland. No. IT/10-1/04 Dated 30th July, 2009

No. F.24/1/2007-TS.III Dated




Eligibility : A Pass In 10+2 level examination with English, Physics, Chemistry, Maths

or a pass in T. Eng, Part-I of the Institution’s examinations


Code Course Title

TC2.1 Surveying

TC2.2 Fluid Mechanics & Machinery

TC2.3 Soil Mechanics

1st Semester

20 Government of Uttarakhand, PWD, Pauri No.1011/20(15) E.A.-Parv./09-10 Dated

Garhwal 06.09.2009.

21 Government of Chhattisgarh, Department of

Technical Education, Manpower Planning, No.F-14/07/42 Dated 11.05.2010.

Science & Technology, Mantralaya,

D.K.S Bhavan, Raipur

22 Govt. of Punjab, Technical Education and No. 1362 Dated 24.06.2010.

Industrial Training, Punjab

23 Rural Electrification Corporation Limited No. REC/ED(HR)/Trg./2010-11/ Dated 10.08.2010

(A Government of India Enterprises)

24 Cement Corporation of India Ltd. No. PD/HRD/6/6/2010/6119 Dated 12.08.2010

(A Government of India Enterprises)

25 Delhi Metro Rail Corporation Ltd. No. DMRC/O&M/HR/2010 Dated 20.08.2010

26 Oil and Natural Gas Corporation Ltd. Rectt. No.7(2)/PR-Rectt./2010 Dated 26.08.2010

Section, Tel Bhawan, Dehradun

27 Anna University Chennai, Chennai-600025 No. 2664/AU/DD1-DAC/2011/F21 Dated

Tamil Nadu 07.01.2011

Code Course Title

TC2.4 Mechanics of Solids

TC2.5 Basic Structural Design

TC2.6 Environmental Engineering

2nd Semester


3rd Semester

Code Course Title

TC2.7 Construction Technology

TC2.8 Estimation, Costing & Specifications

TC2.9 Civil Engineering designs

PR 3.1 Workshop Practice

4th Semester

Code Course Title

AC 1.1 Advance Engineering Mathematics

AC 1.2 Advance Strength of Materials

AC 1.3 Computer Programming and Numerical Methods

AC 1.4 Foundation Engineering

5th Semester

Code Course Title

AC 1.5 Reinforced Concrete Structures and Advanced Concrete Technology

AC 1.6 Design of Steel Structures

SV 5.1 Site Visit

PR 5.1 Workshop Practice

6th Semester

Code Course Title

BC 2.1 Applied Hydraulics & Fluid Mechanics

BC 2.2 Machine Foundations

BC 2.3 Advance Reinforced Concrete Design

BC 2.4 Optimization in Structural design


7th Semester

Code Course Title

BC 2.5 Environmental Engineering

OPTION 1 Group –I Building Construction

BCO 3.1 Advanced Design of Reinforced Concrete Structures

Group –II Highway Engineering

BCO 3.8 Road Transport Management

Group –III Environmental Engineering

BCO 3.14 Pollution & Control Engineering

Group –IV Irrigation & Drainage Engineering

BCO 3.20 Irrigation Engineering


BCO 3.2 Advanced Design of Steel Structures


BCO 3.9 Traffic Engineering


BCO 3.15 Unit Processes in Environmental Engineering


BCO 3.21 Ground Water Hydrology


BCO 3.3 Prestresses Concrete Structures


BCO 3.10 Highways and Railways Engineering


BCO 3.16 Industrial Waste treatment & Disposal


BCO 3.22 Operation and maintenance of Irrigation Structure


8th Semester

Code Course Title


BCO 3.4 Analysis & design of Plate and Shell Structures


BCO 3.11 Airports, Docks and Harbours


BCO 3.17 Environmental Engineering Structures


BCO 3.23 Design and Drawing


BCO 3.5 Design of Tall Buildings


BCO 3.12 Bridge Engineering


BCO 3.18 Sanitary Engineering


BCO 3.24 Water Resources Management

PR 8.1 Project Work

After completion of theory papers, students have to undergo at least

three months mandatory Apprenticeship/ Practical Training at any

AICTE recognized College for award of Chartered Engineers Certificate



Board Fees





a) At the time of Admission Rs. 15500/-

b) Composite Fees (payable at 6th Semester) Rs. 18500/-



*Note : Candidates applying for lateral Entry directly in Semester IV will follow the following

fee structure


Board Fees





a)At the time of Admission (directly to 4th Semester) Rs. 15500/-

b) Composite Fees (payable at 6th Semester) Rs. 18500/-

c) Exemption Examination Fees (per subject) Rs. 1000/-

d) Certification Fees (payable at 8th Semester) Rs. 3500/-

e) Annual Subscription Fees Rs. 500/-


Semester)

Project Approval Fees : Rs.8500/-



Information TechnologyInformation Technology


Information Technology

The world has felt a the explosive impact of

computers and the IT industry in its very core and the

increasing need for computers in the daily life of people has

made it imperative that new designs and new computer software systems be developed so that advancing

technology can be applied in a growing range of applications. The work assigned to people who are called

computer software engineers evolves very fast, which reflects the changes in technology as well as the

increase of new specializations which keep cropping up in this field along with the preferences and

practices of employers. The principles and knowledge of computer science, engineering, and

mathematical analysis are employed by computer software engineers for designing, developing, testing,

and evaluating the software and the systems that computers use to carry out various applications.

Software engineers who work in applications or systems development are engaged in analyzing user needs

and designing, constructing, testing, and maintaining computer applications software or systems. Various

kinds of software like software for operating systems and network distribution, and compilers, which

convert programs for execution on a computer, are developed by a software engineer. In the programming

or coding fields, software engineers give instructions to a computer, line by line; on how on perform a

function or operation. These engineers are also geared to tackle technical problems and hitches. Although

these engineers need to possess string programming skills, they are more occupied with the development

of algorithms and in analyzing and solving problems in programming than with writing codes.

Awarded by Jamia Hamdard University, Delhi

University Recognised by UGC, MHRD & DEC, Govt of India

Duration : Minimum three year and maximum six years.

Eligibility : A candidate seeking admission to BCA programme must have passed 10+2

examination from a recognized board/institute/University

Course Coverage

First Year

Second Year

1 Computer Fundamentals

2 PC Software

3 Computer Mathematics

4 Principles of Management

5 Lab-I: (PC Software)

6 Programming Fundamentals

7 Operating Systems

8 Programme in 'C'

9 Business Systems

10 Lab-II: (Programming in 'C')

1 Computer System Architecture

2 Object Oriented Programming in C++

3 System Analysis & Design

4 Database Application in MS Access

5 Lab-I: (C++ Application in MS Access)

6 Numerical and Statistical Analysis

7 Data Structures in 'C'

8 Computer Networks

9 Web Technologies

Bachelor of Computer Application (BCA)


Course Fees Rs. 16000/- Semester+ Examination Fee +

Identity Card Fee Rs. 100/-

BSAITM Registration : 5500/- (One time payment at the time of admission)

Rs : 2000/- per year

10 Lab-II: Implementing Data Structures in 'C'

1 Software Engineering

2 Java Programming

3 Operating Systems Administration with Windows 2000

4 Advanced Web Development

5 Lab-I: Website Development

6 Project Work

Third Year



Business StudiesBusiness Studies


Business Studies

Business and Management is the rigorous

and critical study of the ways in which

individuals and groups interact in a dynamic

business environment. It is an academic discipline that examines how

business decisions are made and the impact of these decisions on internal and external

environments. Business and Management provides students with the skills to make

sense of the circumstances that drive change in an interdependent and multicultural

world. Emphasis is placed on the ideals of international cooperation and responsive

citizenship

Business and Management draws from such a varied range of sources that it is suitable

for most occupations. It is widely accepted by universities for many diverse courses and

employers recognise its strong practical respectability. Future careers may include

management, retailing, marketing, sales, accountancy, research, the civil service and

consultancy. This course will provide students with a wide range of transferable skills and

can, therefore, be useful in many other subjects and careers

The main aims of the Business and Management courses are:

• To encourage a holistic view of the world of business

• To enable candidates to develop the capacity to think critically

• To enhance candidates’ ability to make decisions

• To enable candidates to appreciate the pace, nature and significance of change

Course Coverage

First Year

Second Year

Third Year

1. Principles of Management

2. Financial Accounting

3. Business Communication

4. Computer Fundamentals

5. Marketing Management

6. Managerial Economics

7. Business Statistics

8. Production & Operations Management

1. Business Policy

2. Business Low

3. Human Resource Management

4. Organizational Behaviour

5. Mathematics for Business and Economics

6. Financial Management

7. Advertising Fundamentals

8. Entrepreneurship & Small Business Management

1. Corporate Governance

Awarded by Jamia Hamdard University, Delhi

University Recognised by UGC, MHRD & DEC, Govt of India

Duration : Minimum three year and maximum six years.

Eligibility : A candidate seeking admission to BBA programme must have passed 10+2

examination from a recognized board/institute/university.

Bachelor of Business Administration (BBA)


2. Marketing Research

3. Sales Management

4. Total Quality Management

5. Conflict Management and Negotiation Skills

6. Environmental Management

7. Leadership

8. Project Work

Course Fee Rs. 16000 per semester+Rs. 2000 Examination Fee per year +

Rs. 100 Identity Card Fee

BSAITM Registration : 5500/- (One time payment at the time of admission)


NATIONAL INSTITUTE OF MEDICAL SCIENCES

NIMS UNIVERSITY

Fully empowered & incorporated as a regular & full-fledged

University vide NIMS UNIVERSITY ACT, 2008

duly recognized by Government of India under the provisions of

Section 2f & Section 22 of UGC Act, 1956

Recognised by

Medical Council of India (MCI), Dental Council of India (DCI)

Pharmacy Council of India (PCI), Nursing Council of India (NCI)

UGC-AICTE-DEC Joint Committee


A Paramedic is an expert who assists the

doctors in focused areas and aids for improved diagnosis and therapy. An upsurge in

number of patients, plethora of diseases & the requirement for vast kinds of treatment

have cemented the role of Paramedical Professionals who are expert technicians. The

rising demand of trained paramedical professionals has unlocked numerous career

opportunities for a lot of aspirants. At Wellwishers academy, there are a number of

courses in the field of paramedical science, at postgraduate, undergraduate and

diploma levels.

Career prospects: After the completion of a paramedical course, employment

avenues exist in the government hospitals, private hospitals and clinics, pathology

labs, college labs, trauma centers etc. The qualified person can work as a radiologist,

medical lab technologist, audiologist, speech therapist, physiotherapist, respiratory

therapist, etc.

1. Bachelor of Medical Laboratory Technology(BMLT) Credits : 96

2. Diploma in Medical Laboratory Technology(DMLT) Credits : 60

3. Diploma in Operation Theatre Technology Credits : 60

4. Diploma in Radiography Technology Credits : 60

Duration : 3 Years

Eligibility : 10+2 with PCB/PCM

Fees : Rs. 15000/- per Semester

Duration : 2 Years/ 3 Years

Eligibility : 10+2 with PCB/PCM / 10th with PCB/PCM

Fees : Rs.11000/- per Semester







Registration & Admission Fees : Rs 3800/-

Exam Fees : Rs2550/-

Registration & Admission Fees : Rs3800/-







Courses Offered : NIMS Guidance & Learning Resource Centre



5. B.Sc. in Biotechnology Credits : 96

6. M.Sc. in Biotechnology Credits : 64

Duration : 3 Years

Eligibility : 10+2 with PCB


Duration : 2 Years

Eligibility : Graduate in related fields





The rules and regulation in force at the time a student

joins a course shall hold good only for the examination

held during or at the end of academic session. Nothing

in these ordinances shall be deemed to debar the

concerned Boards/University from amending the ordinances subsequently and

the amended ordinances i.e. if any shall apply to all the students whether old or new.

1. Candidates shall abide by the Rules & Regulations in force and those that may be issued by the Board/

University from time to time.

2. False declaration of Age, Qualification etc., by the candidate will disqualify his/her admission to the

University/Board.

3. Candidates who have not completed their qualifying exams, or who have appeared in the final exams

and awaiting results can also enroll for the Board/ University Programme. However, the result should

be submitted to the Board/ University before the first semester exam, before the last date

announced by Board/University.

4. Incomplete admission form in any respect and without requisite fee will be summarily rejected.

5. Candidates seeking admission should pay the Programme/Tuition, Registration/Examination and

Board/ University fees in full at the Institution. Please enclose a set of attested photocopies of marks

cards, certificates, date of birth certificate and other documents with the application form duly filled-

in and submit the same on or before the due/last date as mentioned in the advertisement of the

Institution.

6. No request for change of Stream/Programme will be solicited hence forth.

7. The Student should keep on visiting the web-site regularly. In case of any discrepancy, they should

bring into the notice of the Institution within a week, failing so, the Institution will not be responsible.

8. The Students should follow all the deadlines strictly given on the website.

9. Candidates have to submit attested photocopy of all the documents relevant to education

Registration / Enrollment:


General Instructions

qualification (Xth onwards) and the date of birth proof duly attested by Gazetted Officer / Principal of

School or college.

10. The Board/ University reserves the right to change the course curriculum whenever it will be felt that

the change/ modification could best serve the interest of students and the potential employers from

time to time. The Institution will not be responsible for any change, however, it will follow the syllabi

as prescribed.

11. The information given is an indication of the Board’s/ University's plans as on date of publication of

this document. Details can be modified from time to time for academic and operational reasons. The

students will be governed by latest regulations applicable to them during academic year. The

Institution will not be responsible for any change, however, it will strictly follow the laid down rules

as prescribed.

12. The Institution will not refund fees once paid to the eligible candidates under any circumstances.

13. No application form for admission received after the last date specified for the purpose will be

entertained. However, in case the last date for receipt of application is a holiday or that day is

declared holiday by the Institution, the next working day will be considered as the last date for the

purpose.

14. Students are required to preserve carefully the fee paid receipt for all payments made to the

Institution, as it is the only valid document accepted. They will have to produce this copy at the time

of obtaining examination admission ticket, marks cards or relevant documents.

19. Identity Card bearing Permanent Enrollment number will be issued to every student after the

admission is finalized.

20. Medium of Instruction and Examination shall be English.

21. For Registration and Examination purposes, for the entire course, migration certificates will not be

required.

22. Extension in the last date of submission of Registration form shall be decided only by the concerned

Board/ University.

25. All legal disputes, if any, shall come under the jurisdiction of Court in DELHI.


Application form & Prospectus

Selection Procedure

Fees

Discounts – Candidates can avail only one discount structure

The application form and the Prospectus may

be obtained by hand from the Institution Office on cash

payment of Rs.300/- only. The Application form and the

Prospectus may also be obtained by Post. Request for this purpose may be sent to the following along

with a Bank Draft of Rs.375/- only in favour of “BSAITM” payable at New Delhi.

Candidates will be selected purely on the Merit basis, based on the marks of the eligibility

qualification mentioned in the Prospectus. Registration Fees paid will not be refunded under any

circumstances.

1. For Semester Mode courses, Fees will be charged on Semester basis. No monthly instalment scheme

is available. For Yearly mode courses, the Fees will be charged on yearly basis.

2. All fees and other dues are payable by the students in each term by the dates notified by the Director.

3. Fees once paid shall not be refunded or transferred under any circumstances.

4. Guardians of the students are personally liable for the payment of all the dues of their wards.

5. Students shall not be permitted to sit in any examination unless all the outstanding dues and next

semester/yearly fee against their names have been cleared off.

6. The Institution is not responsible for any changes of Fees by Board/ University. The students will have

to adhere with the new Fees structure of the Board/ University. However, The Board/ University will

not be under any obligation except for the Board/ University fees as prescribed by them.

a) 10% discount in Tuition Fees will be given to the candidates belonging to SC/ST/OBC/PH/Women

and BPL

Rules & Regulations


b) 25% discount in Tuition fees for weekend classes/CET/AIEEE appeared candidates.

The Institution will follow the Government rules strictly.

The minimum compulsory attendance for students has been fixed at 75% of the actual number of working

days is each class/ period.

1. Trainees are liable for discharge on account of unsatisfactory progress in training

2. For acts of indiscipline and misconduct.

3. If attendance percentage falls below 50%.

4. The pending investigation of allegations against him/her.

1. Once the student is admitted, he has to pay the course fees in full as scheduled.

2. Students are ought to be regular and punctual at lectures, demonstrations, seminars, practical, field

work and such other academic exercises. They are required to attend all the allotted working periods

in each of the prescribed subjects.

3. Students whose conduct, attendance or progress is not satisfactory, will not allowed to appear in the

examination and their names will automatically struck off from the rolls.

4. Ragging in any form is prohibited in and near-by the campus. Any student found involved in any form

of ragging will be subjected to disciplinary action.

5. Students should maintain a sense of decorum and discipline inside the Institution and in public

places.

Reservation & Age Limit

Minimum Compulsory Attendance

Suspensions/ Discharge

General Guidance


Government Notification forwarded to Various Govt. Department

www.bsaitm.in 61


www.bsaitm.in62


www.bsaitm.in 63

Government of India Notification About IME India Recognition

www.bsaitm.in64

Government of India Notification About IME India Recognition

www.bsaitm.in 65


www.bsaitm.in66

Government of India Notification About ICE India Recognition

www.bsaitm.in 67


www.bsaitm.in68


www.bsaitm.in 69

NOTES

www.bsaitm.in70

Baba S

aheb A

mbedkar

Tech

nic

al Educa

tional Soci

ety

, Vik

asp

uri

, N

ew

Delh

i

Reg

istr

ati

on

5.

Graduation

BSAITM

Mode of study : Face to Face / Distance

RS. 300/-13 04 300

BABA SAHEB AMBEDKAR TECHNICAL EDUCATIONAL SOCIETYNational HQ. : BSAITM Bhawan, Plot No. 13, Bodhella, Vikaspuri, New Delhi-110018 Ph. : 011-28532901, 28532959, 28538972Fax : 011-28532966 Mobile : 9873000679, 9718000679, 9650354070email : [email protected] • URL : www.bsaitm.in

All Courses are Recognized by Ministry of Human …bsates.com/pdf/baba-prospectus-2013.pdfAll...

Documents

Transcript of All Courses are Recognized by Ministry of Human …bsates.com/pdf/baba-prospectus-2013.pdfAll...