Al Cohen Imenco guidewire anchor-502
-
Upload
imencousa -
Category
Technology
-
view
172 -
download
0
Transcript of Al Cohen Imenco guidewire anchor-502
Imenco AS Stoltenberggt. 1
P.O. Box 2143 N-5504 Haugesund
Tel. +47 52 86 41 00 Fax. +47 52 86 41 01
E-mail address: [email protected]
Homepage www.imenco.no
GUIDEWIRE ANCHOR ROV operated anchor for efficient subsea connection of guidewires
Guide wire anchor main mea-surements shown on figure above.
IMENCO has supplied the SUBSEA industry with guide wire an-chors and guide posts since 1988. For increasing depths, Imenco can offer an anchor with capacity up to 50 tons(110.000 Lbs) wire tension. The Imenco design has been specified for projects down to 2200 msw (6.600 feet) and wire dia 1-1/2” (38mm). The anchor is designed to fit a standard 8-5/8” o.d. guidepost or larger dia. Guide post.
Main features: • Proven and patented design. • Simple installation and release by ROV. No special tools required • Fits standard API guidepost • Special receptacle required • Release and re-installation possible in same run • Shear-pin release with shear capacity up to 110000 lbs. All shear-pin parts are
automatically retrieved after operation. • All stainless steel construction • Supplied with full documentation and instructions.
Data:
Anchor stab diameter 117 mm
Over all length 830 mm
Standard socket wire diameter 1-3/8” / 1-1/2”
Weight 70 kg
Available shear-pin capacity To 50 ton / 115.000 lbs