AFCONA Additives Plastics Brochure - TRiiSO€¦ · Higher fluorocarbon modification compared to...

www.afcona.com

AFCONA ADDITIVES Plastics Brochure

AFCONA AdditivesNA Version 3October 2017

AFCONA Additives Sdn Bhd AFCONA Chemicals (Haiman) Co., Ltd AFCONA Additives B.V. AFCONA Additives USA Inc.21, Jalan Anggerik Mokara 31/47, 29, Daqing Road, Amperestraat 34, 5685 Hudson Industrial ParkwayKota Kemuning 40460 Shah Alam, Qing-Llong Chemical Industrial Park, 1704 SN, Heerhugowaard Hudson, Ohio 44236Selangor Darul Ehsan, Malaysia Haimen, Jiangsu, 226121, P.R. China The Netherlands United States of AmericaTel : +603-5122 2289 Tel : +86 513 8265 8995 Tel : +31 (0)72-571 18 60 Tel : +1(330) 650-0971Fax : +603-51228289 Fax : +86 513 8265 8159 Fax : +31 (0)72-572 08 19 Fax : +1(330) 650-0954Web Site : www.afcona.com Web Site : www.afcona.com Web Site : www.afcona.com Web Site : www.afcona.comE-mail : [email protected] E-mail : [email protected] E-mail : [email protected] E-mail : [email protected]

The information given in this booklet is intended for technical guidance without obligation

distributed by:

Request Quote or Samples

AFCONA-7200

AFCONA-7201

AFCONA-7202

AFCONA-7203

AFCONA-7204

AFCONA-7300

AFCONA-7370

AFCONA-7371

AFCONA-7375

AFCONA-7466

AFCONA-7472

AFCONA-7476

AFCONA-7480

AFCONA-7500

AFCONA-7510

AFCONA-7520

AFCONA-7525

AFCONA-7530

AFCONA-7565

AFCONA-8530

Wetting and dispersing agent for pigments and fillers. Suitable for unsaturated polyesters, PVC, and epoxies. Same family as AFCONA-7500 and AFCONA-7520, but different acidic modification lends it different performance in different resin systems. Of the three products, AFCONA-7510 has the highest hydrophilic behavior.

Rheology control agent. Suitable for unsaturated polyesters, PVC, epoxies, and flexible PU applications. Modifies rheology through hydrogen bonding. Works very well in combination with fumed silica and bentonite clays, yielding better anti-settling properties to systems.

Wetting and dispersing agent for pigments and fillers. Same family as AFCONA-7500 and AFCONA-7510, but different acidic modification lends it different performance in different resin systems.

Mainly used as wetting agent for fillers in ambient curing systems, allowing for increased filler levels. Also has very good wetting power to fiberglass.

Wetting and dispersing agent for pigments and fillers. Suitable for unsaturated polyesters, PVC, and epoxies. Very high viscosity depression, allowing for very high fill levels, e.g. of flame retardants. Can also be used as viscosity stabilizer in BMC applications.

7000 Series Additives for Plastics

PropertiesProduct Name

Very strong defoamer, especially in highly filled systems. Recommended for unsaturated polyesters, PVC, epoxies, acrylics, and urethanes. Not suitable for transparent applications. Works very well in FRP applications, where it provides excellent wetting properties on fiberglass.

Moderately strong defoamer and deaerator, especially for highly filled epoxy systems. Very good at destroying surface foam. Not suitable for transparent applications.

Developed for use in unsaturated polyester systems, acrylics, and vinyl esters. Very efficient dearator and anti-foam. Suitable for use in hand-lay, spray, gel-coat, filament winding, casting, and SMC/BMC applications.

Moderate defoamer with good defoaming properties and excellent compatibility. Most suitable for use in transparent applications. Broad compatibility in unsaturated polyesters, PVC, epoxies, and urethanes. Can be used in resin manufacture to improve defoaming properties of resins and will maintain efficacy.

Provides leveling, substrate wetting, lowers coefficient of friction, and increases gloss of finished product. Suitable for unsaturated polyesters, PVC, epoxies, and urethane systems. Will migrate to surface to provide good slip and leveling properties.

Higher fluorocarbon modification compared to AFCONA-7371, yielding faster leveling, stronger anti-cratering, fiber wetting, and pigment and filler wetting. Suitable for unsaturated polyester, PVC, epoxies, and urethanes.

Surface modifier with anti-foam and leveling properties. Suitable for unsaturated polyester, PVC, epoxy, and urethane systems. Will migrate to the surface to provide good leveling and anti-foam properties. Promotes anti-flooding and floating.Same family as AFCONA-7370, with better surface tension reduction properties due to fluorocarbon modification. Great surface modbility control, resulting in improved overall performance.

Dispersing agent for organic and inorganic pigments. Excellent wetting of glass fibers. Very effective dispersing agent for all kinds of pigments. Especially suitable for dispersing of acidic or neutral carbon blacks in PVC and PU foams. Also serves as anti-separation agent for LP/LS modified systems.

Moderate defoamer with good defoaming properties. Mainly developed for unsaturated polyester, acrylic, and PMMA systems. Not recommended for clear applications. Excellent air release properties in airless spray applications.

Very strong anti-settling agent, stabilizes systems with color pigments and extenders. Suitable for unsaturated polyester, epoxies, urethanes, and PVC. Very strong anti-flooding and floating when used in combination with AFCONA-7300.

Can be used as anti-separation agent in LP/LS systems, preventing the low-shrink agent to separate from the UPE resin. Also functions as wetting and dispersing agent for fiberglass, pigments and extenders. Very good with carbon blacks.

100% active wetting and dispersing agent for PVC's, PVC plastisols, and other thermoplastic applications. Works well with organic and inorganic pigments and fillers. Very good viscosity depression, and pigment stability.

Wetting and dispersing agent for pigments and fillers. Suitable for unsaturated polyesters, PVC, epoxies, and polyurethanes. Compared to other products in the portfolio, AFCONA-7525 provides better pigment stability in low viscosity systems.

Acts as a dispersant as well as an internal mold release agent. Made up with hydroxyl and acidic functionality, yielding interphase affinity. Suitable for unsaturated polyesters, especially SMC applications.

Active Flash 7000 Series

Ingredient Point Product Name

N/A 105°C ● ● ● ● ● AFCONA-7200

N/A 105°C ● ● ● ● ● AFCONA-7201

N/A 42°C ● ● AFCONA-7202

N/A 22°C ● ● ● ● ● ● AFCONA-7203

N/A 42°C ● ● ● ● ● AFCONA-7204

50~54% 42°C ● ● ● ● ● AFCONA-7300

69~71% 25°C ● ● ● ● ● AFCONA 7370

69~71% 25°C ● ● ● ● ● AFCONA-7371

50~51% 25°C ● ● ● ● ● AFCONA-7375

50~52% 42°C ● ● ● ● ● AFCONA-7466

34~36% 24°C ● AFCONA-7472

>90% >100°C ● ● ● ● ● ● AFCONA-7476

>96% >100°C ● ● ● ● ● AFCONA-7480

50~52% 42°C ● ● ● AFCONA-7500

≥95% >100°C ● ● ● AFCONA-7510

≥98% >100°C ● ● ● ● AFCONA-7520

79-81% 42°C ● ● ● ● ● AFCONA-7525

45-47% 24°C ● ● ● ● ● ● AFCONA-7530

>96% n/a ● AFCONA-7565

>95% >100°C ● ● ● ● ● ● ● AFCONA-8530

General Indicator on recommendation● - Highly Recommended● - Recommended● - Can be used

Acid Functional Block Polymer

0.5~5.0% on pigment weight 0.2~1.0% on resin weight for

viscosity stabilization-

Polyhydroxyl, Carboxylic Acid & Amide Polymer

fumed silica 10~50% pigments & fillers 0.5~5.0% Sec Butanol

High Molecular Weight Polymer

20~100% on pigment weight 0.5~2.0% on fiberglass -

viscosity stabilization

Alkylbenzene / Sec Butanol

Binder SystemUnsaturated PolyesterPolyvinyl Chloride (PVC)Epoxy

Rigid Polyurethane Systems

Polymethylm

ethacrylate (PMM

A)Polyurethane foam

Acrylic

Dosage

(Based on total formulation)

Non-silicone defoaming substances (0.1~1.0%) SBP/Hydrocarbon

SolventChemical

Modified Polysiloxane and Defoaming

Polymer(0.1~1.0%) SBP/Hydrocarbon

Non-silicone defoaming substances (0.2~1.0%) PMA/Alkylbenzene

Polymer(0.2~1.0%) DIBK/Alkylbenzene

Modified Polysiloxane (0.2~0.5%) Alkylbenzene

Fluorocarbon Modified Polyacrylate (0.3~2.0%) PMA/Alkylbenzene

Modified Polyacrylate (0.3~2.0%) Alkylbenzene

Fluorocarbon Modified Polyacrylate (0.3~2.0%) Alkylbenzene

Alkylammonium Salt of a High Molecular Weight Copolymer

0.5~2.0% anti-separation 10~30% on pigment weight

0.5~2.0% on fiberglass-

Non-silicone defoaming substances (0.1~1.0%) PMA/Alkylbenzene/SBP

Polycarboxylic Acid Polymer 0.5~5.0% on pigment weight DIBK/Alkylbenzene

0.5~2.0% on fiberglass

Butyl Acetate/PMA/ Sec Butanol

Polyether Polymer Modification with

acidic groups0.5~5.0% on pigment weight -

viscosity stabilizationMethoxy Propyl Acetate

Polymer with Interphase Affinic

Groups(3.0~5.0%) -