Adams Rite Architectural Hardware - Locksandsafesonline Rite... · products, Adams Rite, upon...

adamsrite.com

Prices effective February 1, 2016

Adams Rite Architectural

Hardware

2016 PRICE LIST

800.872.3267 • Fax 800.232.7329

10027 S. 51st Street, Ste 102 Phoenix, Arizona 85044

www.adamsrite.com

3

Limited WarrantyProducts sold under the Adams Rite brand in the United States of America are warranted free from defects in workmanship and materials under normal use and service.

This warranty does not cover defects or damage arising from improper installation, lack of or improper maintenance, improper storage, shipping and handling, corrosion, erosion, ordinary wear and tear, misuse, abuse, accident, unauthorized service, or use with unauthorized non-Adams Rite products or parts.

This warranty is void if any modification is made to the product, regardless of whether the modification causes or contributes to the alleged defect. All modifications are made at the risk of the party making the modification.

Should any defect of manufacture (in material or workmanship) occur in its products, Adams Rite, upon prompt notification and proof to its satisfaction that the product was defective in manufacture for the use intended by Adams Rite, will at its option, exchange the product, repair the product, or refund the price charged by Adams Rite, FOB factory within the stated time frame listed below.

• All mechanical products for five (5) years from date of manufacture

• Ultraline 7400 Electric Strikes for five (5) years from date of manufacture

• All electrical products for three (3) years from date of manufacture, with the exception of the exit devices with the SE option

• Exit devices with the SE option for one (1) year from date of manufacture. Adams Rite recommends that for optimal performance all exit devices with the SE option are installed and powered using PS-SE power supplies. Installing SE exit devices with PS-SE power supplies extends the warranty to five (5) years from date of manufacture.

General RMA ProcedureProduct repair or replacement, or associated charges, will not be accepted under this warranty unless prior authorization from Adams Rite has been given. Upon receipt of products returned for repair or replacement, Adams Rite will determine whether products qualify for repair or replacement under this warranty. Adams Rite has no liability to pay any costs of repair performed by anyone other than qualified personnel authorized by Adams Rite prior to the work being done.

Written notice of a product or component part believed to be defective as covered by this warranty should be sent to Adams Rite, 10027 S. 51st Street, Suite 102, Phoenix, Arizona 85044 or [email protected] and should include your name and address, an identification of the product or component part and a brief description of the defect. Notice of a product or component part believed to be defective as covered by this warranty may also be accepted over the telephone by Adams Rite, 800.872.3267.

Upon receipt of such notice, if the customer has an account with Adams Rite or a valid credit card, an advance replacement product may be ordered whereby Adams Rite will ship a replacement product to the customer free of charge. If Adams Rite does not receive the original defective product from the customer within 60 days, Adams Rite will charge the customer’s account or credit card for the price of the advanced replacement product plus freight costs. Upon inspection of the returned product by Adams Rite, a decision will be made whether or not to charge the customer for the advanced replacement Adams Rite product. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms. Obsolete products will not be accepted for return. Return Material Authorizations (RMAs) will be closed if the goods are not received within 60 days of issuance.

If Adams Rite receives original defective product from the customer within 60 days of RMA issuance, and if the customer is requesting credit for the

defective material, the customer must reference the valid Adams Rite Purchase Order number upon which the product was originally ordered. If the original Purchase Order number is not available, at Adams Rite’s option a credit may be issued at the customer’s current cost. This decision will be made solely by Adams Rite in accordance with the provisions of these Terms.

Transportation charges and insurance on all returned materials must be prepaid by the purchaser when merchandise is ordered in error. On goods returned for customer convenience, when the purchaser returns materials in compliance with these Terms which are accepted by Adams Rite, the purchaser may be issued a credit for 65% of the purchase price, with 35% charged by Adams Rite for handling and reprocessing. All refunds will be in the form of a credit.

Scrap in field may be allowed on select products for customers who have prior agreement with Adams Rite. In this case the original defective product will not have to be returned to Adams Rite. Items allowed under this program are subject to the discretion of Adams Rite and may change at any time. Only authorized product is allowed to be scrapped in the field. Unauthorized product scrapped in the field will be considered ‘not returned’ and the customer will be charged for the replacement or credit will be denied.

CancellationAs an industry leader, Adams Rite is committed to maintaining the highest standard of quality and ensuring strict compliance to industry codes. Adams Rite’s proud history of customer service and manufacturing agility allow quick response times to customer’s changing needs, which may include special orders or product modifications. Please be advised that all product modifications require special authorization to ensure the order fully meets customer’s expectations. Customers are asked to allow for an extended lead time on all special orders. Please note that at Adams Rite’s option, product modifications and other special orders cannot be changed, cancelled, or returned once a ship date has been provided on an order acknowledgement by Adams Rite.

Adams Rite prides itself on introducing new, industry-relevant, feature-rich products. Since new solutions will surpass the capabilities of older product lines, historical products may be subsequently discontinued. Every effort will be made to announce new product introductions as well as product discontinuations in a manner that allows customers advanced notice of these events. Once a product line is discontinued orders will be fulfilled in order of receipt, although Adams Rite cannot guarantee all orders can be filled. Repair services and spare parts for discontinued product lines will be available for some reasonable time period. Adams Rite reserves the right to replace discontinued product with an equivalent product as deemed by Adams Rite.

THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. TO THE EXTENT PERMITTED BY LAW, ALL IMPLIED WARRANTIES ARE LIMITED TO THE DURATION OF THIS WARRANTY. ADAMS RITE IS A DIVISION OF HANCHETT ENTRY SYSTEMS, INC. HANCHETT ENTRY SYSTEMS, INC. SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

LIMITED WARRANTY

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

4

General InformationAdams Rite Limited Warranty/Terms and Conditions �� 3

Table of Contents ��4-5

Products

DEADLOCKS

RT1050D RITE Touch®Digital Glass Door Lock �� 6

1830 Bottom Rail Deadlock(Swingbolt) �� 6

MS1837 Series MS® Two-Point Deadlock �� 6

MS1847 Series MS® Deadlock �� 7

MS1850S Series MS® Deadlock �� 7

MS1850SN Series MS® Deadlock (ANSI Size) �� 8

MS1861 Series MS® Bottom Rail Deadlock �� 8

1875 Two-Point Deadlock �� 8

MS+1890 Series MS® Deadlock/Deadlacth �� 9

MS1950 Series MS® Deadlock �� 9

2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors �� 10

2290 Dual Force® Interconnected Deadbolt/Deadlatch for Stile and Rail Wood or Hollow Metal Doors �� 11

2331 Heavy Duty Deadbolt �� 11

4070 Series Short Throw Deadbolt (Projection Style) �� 12

4189, 4190 Flush Locksets (Including Deadlock) �� 12

4430, 4431 Flush Locksets (Including Deadlock) �� 13

5017 Wood Door Deadbolt �� 13

5055 Wood Door Deadlock for Sliding Doors �� 13

DEADLATCHES

4300 Electrified Deadlatch (eLatch) – Steel Hawk �� 14

4300 RITE Pack �� 14

4510 Standard Duty Deadlatch �� 15

4530 Standard Duty Deadlatch �� 15

4781 Two-Point Deadlatch with Paddle �� 16

4900 Heavy Duty Deadlatch �� 16

4920AN Heavy Duty Deadlatch (ANSI Size) �� 16

FLUSHBOLTS & PIVOTS

1870 Cylinder-Operated Flushbolt �� 17

1870HM Cylinder-Operated Flushbolt �� 17

1877 Cylinder-Operated Flushbolt �� 17

MS1880, MS1881 Two-Point Flushbolts �� 18

MS2180 Auto-Release Two-Point Flushbolt �� 18

B1921, B1923 Reinforcing Pivots �� 18

EXIT DEVICES

8099 Dummy Pushbar �� 19

3100, 8100 Surface Vertical Rod Exit Device �� 19

8200 Narrow Stile Surface Vertical Rod Exit Device �� 20

3300, 8300 Mortise Exit Device �� 20

8400 Narrow Stile Mortise Exit Device �� 21

3600, 8500 Metal Door Concealed Vertical Rod Exit Device �� 22

8600 Narrow Stile Concealed Vertical Rod Exit Device �� 22

3700, 8700 Rim Exit Device �� 23

8800 Narrow Stile Rim Exit Device �� 23

3900, 8900 Wood Door Concealed Vertical Rod Exit Device �� 24

ACCESSORIES FOR EXIT DEVICES �� 24

KITTED OPTIONS FOR EXIT DEVICES �� 25

MODIFICATION OPTIONS FOR EXIT DEVICES �� 25

ELECTRIC STRIKES

7100, 7101 Electric Strikes �� 25



7140 Electric Strike �� 27



7100 Series Electric Strikes Components �� 28

7240 Fire-Rated Electric Strike �� 29

7270 Fire-Rated Electric Strike �� 29

Ultraline 7400, 7401 Electric Strikes �� 30



Ultraline 7440 Electric Strikes �� 31

Ultraline 74R1 Electric Strikes �� 31

Ultraline 74R2 Electric Strikes �� 32

7400 Series Electric Strikes Components �� 32

TABLE OF CONTENTS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

5TABLE OF CONTENTS

TRIM

1000 Series Turns �� 33

3000 Fixed Pull �� 33

3080 Series Entry Trim �� 34

3090, 3090P/C eForce® Keyless Entry �� 35

A100-3090H Keyless Entry and Aperio® Hub Wholesale Kit �� 35

4060 Turn �� 36

4550 MS® Deadlock Lever �� 36

4560, 4565 Series Deadlatch Handles for 4300, 4500, 4900 �� 36

4560-010, 4565-010 Series Deadlatch Handles for MS+1890 �� 37

4568, 4569 Eurostyle Deadlatch Handles �� 37

4568-010, 4569-010 Series Deadlatch Handles for MS+1890 �� 38

4590 Deadlatch Paddle for 4300, 4500, 4900 �� 38

4590-1X Deadlatch Paddle for MS+1890, 2190 �� 39

4591 Deadlatch Paddle for 4300, 4500, 4900 �� 39

4591-1X Deadlatch Paddle for MS+1890, 2190 �� 40

4600 Heavy Duty Designer Deadlatch Handle �� 41

CYLINDERS

4024, 4025, 4029 Cylinder Pulls �� 42

4036 Mortise Cylinder �� 42

MS4043 Cylinder Guard �� 43

4066 Thumbturn �� 43

4580 Cam Disc �� 43

4581 Universal Cam Disc �� 44

8650 Cylinder Escutcheon Kit �� 44

8736 Rim Cylinder �� 44

ACCESSORIES

4014 Two-Point Conversion Kit �� 45

4015 Threshold Bolt �� 45

4016 Header Bolt �� 45

4085 Header Bolt (Pairs of Doors Only) �� 45

4089 Exit Indicator �� 46

4104 Mounting Bridges �� 46

91-0965 Universal Mounting Tab Kits for Installing MS® Locks & Latches �� 46

2190 Dual Force® Interconnected Deadbolt/Deadlatch Strikes �� 46

2290 Dual Force® Interconnected Deadbolt/Deadlatch Strikes �� 47

4000 Series MS® Deadlock Strikes �� 47

4800, MS 4804 Series Strikes �� 47

4901, 4902 Deadlatch Strikes �� 48

4304 Deadlatch Strike �� 48

THICK DOOR KITS

2190, 2290 Dual Force® Interconnected Deadbolt/Deadlatch Thick Door Kit �� 48

4568, 4569 Eurostyle Deadlatch Handles Thick Door Kits �� 49

FACEPLATES

MS1850S, MS1850A, MS1950 Deadlocks (Long Throw) Faceplates �� 49

MS1850S, MS1850A, MS1950 Deadlocks (Hookbolt and Short Bolt) Faceplates �� 49

MS1850S Deadlocks Faceplates �� 49

MS1850SN Deadlocks (Long Throw) Faceplates �� 49

MS1850SN Deadlocks (Hookbolt) Faceplates �� 50

1870 Flushbolt Faceplates �� 50

MS+1890 Deadlock Faceplates �� 50

2331 Heavy Duty Deadbolt Faceplates �� 50

3300 Fire-Rated Mortise Exit Device Faceplates �� 50

4070 Short Throw Deadbolt Faceplates �� 51

4500 Standard Duty Deadlatch Faceplates �� 51

4530 Standard Duty Deadlatch Faceplates �� 51

4900 Heavy Duty Deadlatch Faceplates �� 51

4900 Heavy Duty Deadlatch Special Faceplates �� 51

4920, 8300 Faceplates �� 51

7100, 7160 Electric Strikes Faceplates �� 52

7101 Electric Strikes Faceplates �� 52





7140, 7170 Electric Strikes Faceplates �� 52

POWER

PS-SE Power Supply �� 53

PS-1 Power Supply �� 53

PS-LR Power Supply �� 53

4603, 4605, 4606 Transformer/Rectifier/Plezo Horn �� 54

4612 Power Transfer Device �� 54

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

6

RT1050D RITE Touch® Digital Glass Door LockMODELS

RT1050D Digital glass door lock for single or double doors $600.00

RT-5C-1050 Extra cards (package of 5 cards) $60.00

HOW TO ORDER Specify quantity and the following information.

RITE TOUCH MODEL

RT 1050D1050D For single or double doors

1830 Bottom Rail Deadlock (Swingbolt)

sw 1830

MODEL & FINISHES 313, 628

1830 31/32", or 1-1/8" cylinder height $133.00

HOW TO ORDER Specify quantity and the following information. Order related products separately.

PRODUCT NO. DASH NO. (SPECIFY FOR CYLINDER HEIGHT AND LOCK DEPTH) FINISH

1830 -02 -62802 Cylinder Height 31/32" Dim. "A" 1-5/8" 628 Clear Anodized

03 Cylinder Height 1-1/8" Dim. "A" 1-25/32" 313 Dark Bronze Anodized

MS1837 Series MS® Two-Point Deadlock MODELS & FINISHES 313, 335, 628 605, 626

MS1837 Includes 4001-011 strike, 36" cylinder height $235.00 $320.00

MS1837 Cylinder height other than 36" (maximum cylinder height 65”) $283.00 $380.00


PRODUCT NO. FINISH

MS1837 -313313 Dark Bronze Anodized 626 Satin Chrome

335 Black Anodized 628 Clear Anodized

605 Bright Brass

If cylinder height other than 36” is required, specify exact height from bottom of door to cylinder center. Maximum cylinder height 65”.

DEADLOCKS

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

7

MS1847 Series MS® Deadlock/DeadlatchMODEL & FINISH 630

MS1847 Deadlock, stainless steel $57.00


PRODUCT NO. FACE SHAPE, HUB ANGLE, LOCK OR LATCH FINISH

MS1847 -02 -630 (See Configuration table below)

(Blank) -02 -06

-09 -10 -11

-13SELF-

LATCHING

SELF-LATCHING

VERT.

VERT.

22.5° 22.5°

45° 45°

45°

630 Satin Stainless

MS1850S, MS1850S-050 Series MS

® Deadlock

MODELS & BACKSETS 7/8" 31/32", 1-1/8", OR 1-1/2"

MS1850S Flat faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00

MS1851S Radius faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00

MS1851SW Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, without strike

$84.00 $72.00

MS1852S Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $79.00 $67.00

Schoolhouse function for above locks add $36.


PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH

MS185 0S -2 1 0 -6280S Flat 1 7/8" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized

1S Radius 2 31/32" 5 Hookbolt 6 RH or LHR 335 Black Anodized

1SW Radius with weatherstrip 3 1-1/8" 0 Non-Handed* 628 Clear Anodized

2S Bevel 4 1-1/2"

*Any flat or radius faceplate, except Schoolhouse.

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

8

MS1850SN, MS1850SN-050 Series MS

® Deadlock (ANSI Size)

MODELS

MS1850SN Flat faceplate, any handing, 313, 335, or 628 finish, without strike $95.00

MS1851SN Radius faceplate, any handing, 313, 335, or 628 finish, without strike $95.00

MS1852SN Bevel faceplate, any handing, 313, 335, or 628 finish, without strike $95.00


PRODUCT NO. FACEPLATE ANSI SIZE BOLT SHAPE HANDING FINISH

MS185 0 SN -41 0 -6280 Flat 41 Straight 5 LH or RHR 313 Dark Bronze Anodized

1 Radius 45 Hookbolt 6 RH or LHR 335 Black Anodized

2 Bevel 0 Non-Handed* 628 Clear Anodized

*Any flat or radius faceplate, except schoolhouse.

MS1861 Series MS® Bottom Rail Deadlock

sw m

s 1861

MODELS & FINISH 603

MS1861-01 One-point deadlock, vertical bolt operation only $139.00

MS1861-02 Two-point deadlock, horizontal and vertical operation $175.00


PRODUCT NO. BOLT OPERATION FINISH PACKAGING

MS1861 -01 -603 -IB01 Vertical Bolt Only 603 Zinc plated steel IB Individually Boxed

02 Vertical and Horizontal Bolts

If tube spacers are required, specify QUANTITY and LENGTH.

1875 Two Point Deadlock MODEL & FINISH 603

1875 Two-point deadlock $171.00


PRODUCT NO. PACKAGING

1875 -IBIB Individually Boxed

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

9

MS+1890 Series MS® Deadlock/DeadlatchMODELS & FINISHES 628, 313, 335

MS+1890 Flat faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $238.00

MS+1891 Radius faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $238.00

MS+1891W Radius faceplate with weatherstrip, any handing, 31/32", 1-1/8", or 1-1/2" backset $248.00

MS+1892 Bevel faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $238.00

MODEL

MS+1893-IB Without faceplate, without strike $210.00


PRODUCT NO. FACEPLATE BACKSET STRIKE SHAPE/LIP LENGTH HANDING FINISH

MS+189 1 -3 02 6 -6280 Flat 2 31/32" 01 Flat/Standard Jamb 5 LH or RHR 313 Dark Bronze Anodized

1 Radius 3 1-1/8" 02 Radius/Standard Stile 6 RH or LHR 335 Black Anodized

1W Radius with weatherstrip 4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

2 Bevel 21 Flat/Center Hung 4-1/2" Jamb

For door thickness other than 1-3/4”, contact factory.

MS1950, MS1950-050 Series MS

® Deadlock

MODELS

MS1950 Flat faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $123.00

MS1951 Radius faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $123.00

MS1951W Radius faceplate with weatherstrip, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $128.00

MS1952 Bevel faceplate, any handing, 313, 335, or 628 finish, 31/32", 1-1/8", or 1-1/2" backset $123.00

Schoolhouse function for above locks add $36.


PRODUCT NO. FACEPLATE BACKSET BOLT SHAPE HANDING FINISH

MS195 0 -2 1 0 -6280 Flat 2 31/32" 1 Straight 5 LH or RHR 313 Dark Bronze Anodized

1 Radius 3 1-1/8" 5 Hookbolt 6 RH or LHR 335 Black Anodized

1W Radius with weatherstrip 4 1-1/2" 0 Non-Handed* 628 Clear Anodized

2 Bevel

*Any flat or radius faceplate except schoolhouse.

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

10 DEADLOCKS

2190 Dual Force® Interconnected Deadbolt/Deadlatch for Aluminum Stile Doors

STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM

MODELS & TRIM SETS10B, US32,

US32D US3, US4

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

2190 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

$589.00 $671.00 $748.00 $845.00 $488.00 $570.00

2190 Deadbolt/Deadlatch with flat/centerhung 4” or 4.5” strike, standard series handle designation (01, 02, 03)

$604.00 $686.00 $763.00 $860.00 $503.00 $585.00

2190 Deadbolt/Deadlatch with flat or radius strike, designer lever series designation (MD through MW)

$634.00 $716.00 $793.00 $890.00 $533.00 $615.00

MODELS & FINISHES 628, 313, 335 N/A

2190 BOXED LOCK Less lever trim, with adjustable faceplate and choice of standard or radius strike $272.00

EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $157.00


PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH

2190 -3 1 1 -1 01 32D3 1-1/8" 0 None 1 Clear Anodized 628 0 None 00 No Handle 03 Bright Brass (US3)

4 1-1/2" 1 Standard Flat 2 Dark Bronze Anodized 313 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)

2 Radius Strike 3 Black Anodized 335 2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)

3 Flat/Center Hung 4" 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)

4 Flat/Center Hung 4-1/2" 03 Square 32D Satin Stainless (US32D)

DESIGNER SERIES:

MD MJ

ME MN (Handed)

MG MV (Handed)

MI MW

Trim options 1 and 2 are for outswing doors only.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

11 DEADLOCKS

2290 Dual Force® Interconnected Deadbolt/Deadlatch for Wood or Hollow Metal Stile and Rail Doors

STANDARD TRIM SET ELECTRIFIED TRIM SET LOW PROFILE TRIM

MODELS & TRIM SETS10B, US32,

US32D US3, US4

10B, US32, US32D

US3, US4

10B, US32, US32D

US3, US4

2290 Deadbolt/Deadlatch with flat or radius strike, standard series handle designation (01, 02, 03)

$605.00 $688.00 $764.00 $867.00 $505.00 $577.00

2290 Deadbolt/Deadlatch with flat or radius strike, designer series handle designation (MD through MW)

$650.00 $733.00 $809.00 $912.00 $550.00 $622.00

MODELS & FINISHES 313, 335, 628 N/A

2290 BOXED LOCK Less lever trim, with adjustable faceplate and standard strike $280.00

EK-2190 Electrification Kit 12/24 VAC/VDC (not compatible with low profile trim) $159.00


PRODUCT NO. BACKSET STRIKE FACEPLATE FINISH TRIM HANDLE DESIGNATION TRIM AND HANDLE FINISH

2290 -3 1 1 -1 01 32D3 1-1/8" 0 None 0 US to match trim finish 0 None 00 No Handle 03 Bright Brass (US3)

4 1-1/2" 1 Standard Flat 1 Clear Anodized 628 1 With Trim Set STANDARD SERIES: 04 Satin Brass (US4)

2 Dark Bronze Anodized 313

2 With Electrified Trim Set 01 Curve 10B Dark Bronze (US10B)

3 Black Anodized 335 3 Low Profile Trim 02 Round 32 Bright Stainless (US32)

03 Square 32D Satin Stainless (US32D)

DESIGNER SERIES:

MD MJ

ME MN (Handed)

MG MV (Handed)

MI MW

Trim options 1 and 2 are for outswing doors only.

2331 Heavy Duty DeadboltMODEL & FINISHES 121, 626 605, 625

2331 Deadlock and strike $290.00 $317.00


PRODUCT NO. FINISH

2331 -626121 To Match Dark Bronze Anodized 313

605 Bright Brass

625 Bright Chrome

626 Satin Chrome

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

12

4070 Series Short Throw Deadbolt (Projection Style)MODELS & FINISHES 313, 335, 628

4070 Flat faceplate, 7/8", 31/32", or 1-1/8" backset $160.00

4071 Radius faceplate, 7/8", 31/32", or 1-1/8" backset $160.00

4072 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset $160.00

MODEL

4073 Without faceplate $155.00


PRODUCT NO. FACEPLATE BACKSET HANDING FINISH

407 2 -2 6 -6280 Flat 1 7/8" 5 LH or RHR 313 Dark Bronze Anodized

1 Radius 2 31/32" 6 RH or LHR 335 Black Anodized

2 Bevel 3 1-1/8" 0 Non-Handed* 628 Clear Anodized

*Any flat or radius faceplate.

4189, 4190 Flush Locksets (Including Deadlock)MODELS & FINISHES STANDARD LOCK FACE

STAINLESS STEEL LOCK FACE

4189-IB Flush lockset, individually boxed $93.00 $100.00

4190-IB Flush lockset, individually boxed with cylinder $123.00 $130.00

4195-IB Dummy flushset, individually boxed $62.00 $69.00


PRODUCT NO.

LOCKSET EXTERIOR LOCK FACE

STILE THICKNESS FINISH KEYING OPTIONS PACKAGING

41 90 -09 -1 -130 -01 IB

89 Without Cylinder 00 Without Lock 1 1" to 1-3/8" 130 To match Clear Anodized 628 00 Without Cylinder IB Individually Boxed

90 With Cylinder 09 Radius 2 1-7/16" to 1-5/8" 121 To match Dark Bronze Anodized 313 01 Keyed Different

95 Dummy 09S Radius Stainless Steel 3 1-11/16" to 2"119 To match Black Anodized 335 02 Keyed Alike in Pairs

10 Square

10S Square Stainless Steel

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

13

4430, 4431 Flush Locksets (Including Deadlock)

MODELS & FINISH STANDARD LOCK FACE STAINLESS STEEL

LOCK FACE

4430-IB ABS flush lockset, individually boxed $64.00 $71.00

4431-IB ABS flush lockset with cylinder, individually boxed $98.00 $105.00

4432-IB ABS dummy flushset, individually boxed $28.00 $35.00

Kitted OptionsMODELS & FINISHES GRAY 335

4413 Grip pull for use with 4189, 4190 $21.00

4453-02 Grip pull for use with 4430, 4431 $31.00


PRODUCT NO. LOCKSET EXTERIOR LOCK FACE STILE THICKNESS KEYING OPTIONS PACKAGING

44 31 -09 -05 -01 -IB30 Without Cylinder 00 Without Lock 00 1" to 1-5/16" 00 Without Cylinder IB Individually Boxed

31 With Cylinder 09 Radius 05 1-3/8" to 1-5/8" 01 Keyed Different

32 Dummy 09S Radius Stainless Steel 08 1-3/4" to 2" 02 Keyed Alike in Pairs

10 Square

10S Square Stainless Steel

5017 Wood Door Deadlock/DeadlatchMODELS & FINISH 630

5017-00 Stainless steel deadlock $57.00

5017-02 Self-latching deadlock $57.00


PRODUCT NO. LATCH CONFIGURATION

5017 -0000 Standard

02 Self Latching

5500 Wood Door Deadlock for Sliding Doors MODELS 626

5500-20-626 Lockset, strike and trim included for 1-1/4” thick sliding wood doors $120.00


PRODUCT NO. DOOR THICKNESS FINISH

5500 -20 -62620 1-1/4" Thick 626 Satin Chrome

DEADLOCKS

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

14 DEADLATCHES

DEADLATCHES

4300 Steel Hawk® Electrified Deadlatch (eLatch)MODELS & FINISHES 313, 335, 628

4300 31/32", 1-1/8", or 1-1/2" backset $402.00

4300-M Monitored option, 31/32”, 1-1/8”, or 1-1/2” backset. $462.00


PRODUCT NO. BACKSET MONITORING STRIKE STIRKE SHAPE/LIP LENGTH FACEPLATE FINISH

4300 -3 M -2 01 -6282 31/32" 0 None 1 Surface Mount (4304) 01 Flat/Standard Jamb 313 Dark Bronze Anodized

3 1-1/8" M Monitored 2 Mortised (4901) 4-5/8" 02 Radius/Standard Stiles** 335 Black Anodized

4 1-1/2" 17 Flat/Center Hung 4" Jamb** 628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb**

** See ACCESSORIES for available 4901 strike options.

4300 RITE Pack® MODELS

4300-20 31/32" backset, surface mount or mortise strike, 313 and 628 faceplates $417.00

4300-30 1-1/8" backset, surface mount or mortise strike, 313 and 628 faceplates $417.00


PRODUCT NO. BACKSET MONITORING STRIKE RITE PACK

4300 -3 0 -1 RP2 31/32" 0 None 1 Surface Mount (4304)

3 1-1/8" 2 Mortised (4901) 4-5/8"

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

15DEADLATCHES

4510 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628

4510 Flat faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $79.00

4511 Radius faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $79.00

4511W Radius faceplate with weatherstrip, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $84.00

4512 Bevel faceplate, 7/8", 31/32", 1-1/8", or 1-1/2" backset, strike included $79.00

MODEL

4513-IB Without faceplate, without strike $58.00


PRODUCT NO. FACEPLATE BACKSET HANDING STRIKE SIZE STRIKE SHAPE/LIP LENGTH FACEPLATE FINISH

451 1 -3 6 -2 01 -628

0 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized

1W Radius with weatherstrip 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

2 Bevel 4 1-1/2" 21 Flat/Center Hung 4-1/2" Jamb

4530 Standard Duty DeadlatchMODELS & FINISHES 313, 335, 628

4530 Flat faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $97.00

4531 Radius faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $97.00

4532 Bevel faceplate, 7/8", 31/32", or 1-1/8" backset, strike included $97.00



453 1 -3 6 -1 01 -6280 Flat 1 7/8" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

1 Radius 2 31/32" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stiles 335 Black Anodized

2 Bevel 3 1-1/8" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

16 DEADLATCHES

4781 Two-Point Deadlatch with PaddleMODEL & FINISHES 313, 335, 628 US26, US26D

4781 Paddle includes dogging feature $307.00 $428.00


PRODUCT NO. OPERATION PADDLE FINISH

4781 T -021 -628T Top rod only 021 Push to LEFT 313 Dark Bronze Anodized US3 Bright Brass

– Standard rod 041 Push to RIGHT 335 Black Anodized US26 Bright Chrome

628 Clear Anodized US26D Satin Chrome

4900 Heavy Duty DeadlatchMODELS & FINISHES 313, 335, 628

4900 Any handing, 31/32", 1-1/8", or 1-1/2" backset $108.00

4911W Radius with weatherseal faceplate, any handing, 31/32", 1-1/8", or 1-1/2" backset $113.00

MODEL

4913-IB Without faceplate or strike $83.00



49 00 -3 5 -2 01 -62800 Standard 2 31/32" 5 LH or RHR 1 Mortised (4901) 4-5/8" 01 Flat/Standard Jamb 313 Dark Bronze Anodized

11W Radius with Weatherseal 3 1-1/8" 6 RH or LHR 2 Mortised (4902) 2-5/8" 02 Radius/Standard Stile 335 Black Anodized

4 1-1/2" 17 Flat/Center Hung 4" Jamb 628 Clear Anodized

21 Flat/Center Hung 4-1/2" Jamb

4920AN Heavy Duty Deadlatch (ANSI Size)MODELS & FINISHES 313, 335, 628

4920AN Flat faceplate, 1-1/2” or 2-3/4” backset with 4506 strike $132.00

4920AN Flat faceplate, 1-1/2” or 2-3/4” backset without strike $117.00

MODEL

4923AN-IB Without faceplate or strike $97.00


PRODUCT NO. BACKSET HANDING STRIKE FACEPLATE FINISH

4920AN 4 6 -602 -3134 1-1/2" 5 LH or RHR 000 Less Strike 313 Dark Bronze Anodized

5 2-3/4" 6 RH or LHR 602 4506 Strike 335 Black Anodized

628 Clear Anodized

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

17FLUSHBOLTS & PIVOTS

FLUSHBOLTS & PIVOTS

1870 Cylinder-Operated Flushboltsw 1870 series

MODELS & CYLINDER HEIGHT STANDARD CYLINDER HEIGHTCYLINDER HEIGHT

OVER 12" (SPECIFY)

1870 Flat faceplate, 313, 335, or 628 finish $111.00 $144.00

1871 Radius faceplate, 313, 335, or 628 finish $111.00 $144.00

1871W Radius faceplate with weatherstrip, 313, 335, or 628 finish $113.00 $146.00

1872 Bevel faceplate, 313, 335, or 628 finish $111.00 $144.00

For cylinders over 12” specify cylinder height, 65” maximum. Contact factory for cylinder heights taller than 65”.


PRODUCT NO. FACEPLATE SHAPE BACKSET HANDING FINISH

187 0 -2 0 -6280 Flat 2 31/32" 0 Non-Handed* 313 Dark Bronze Anodized

1 Radius 3 1-1/8" 5 LH or RHR 335 Black Anodized

1W Radius with weatherstrip 6 RH or LHR 628 Clear Anodized

2 Bevel


1870HM Cylinder-Operated FlushboltMODEL & FINISHES 313, 335, 628

1870HM For hollow metal, 1-1/4" backset $152.00

Cylinder height, 65" maximum. Contact factory for cylinder heights taller than 65”.


PRODUCT NO. FACEPLATE SHAPE HANDING FINISH

187 0HM 5 -6280HM Flat 0 Non-Handed* 313 Dark Bronze Anodized

2HM Bevel 5 LH or RHR 335 Black Anodized

6 RH or LHR 628 Clear Anodized


1877 Cylinder-Operated FlushboltMODELS & FINISHES 628, 313 605, 626

1877 1-1/4" backset, 13-1/2" cylinder height $187.00 $270.00

1877 1-1/4" backset, cylinder height other than 13-1/2" (maximum cylinder height 57.5") $235.00 $320.00

Maximum cylinder height 57.5”.


PRODUCT NO. FINISH

1877 -628313 Dark Bronze Anodized 626 Satin Chrome

605 Bright Brass 628 Clear Anodized

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

18 FLUSHBOLTS & PIVOTS

MS1880, MS1881 Two-Point Flushboltssw ms 1880MODELS & FINISHES 119, 121, 682

MS1880 Hourglass shaped turn $141.00

MS1881 Teardrop shaped turn $141.00

MODEL 119, 121, 682

TDK-1880 Tall door kit for doors over 84". 144" maximum $26.00


MODEL TURN SHAPE CYLINDER HEIGHT* FINISH

MS18 80 -01 -682MS18 80 Hourglass 01 31" to 35" 119 Black

81 Teardrop 02 35-1/16" to 39" 121 Dark Bronze

03 39-1/16" 43" 682 Satin Chrome

04 43-1/16" to 47"

05 47-1/16" to 51"

*Distance from floor to cylinder centerline.

MS2180 Auto-Release Two-Point FlushboltMODELS & FINISHES 119, 121, 682

MS2180 7’, 8’, 9’, 10’ door height $213.00


PRODUCT NO. TURN SHAPE DOOR HEIGHT (FROM FLOOR TO TOP OF DOOR) FINISH TO MATCH

MS218 0 -07 -1300 Hourglass 07 Up to 7' Door 119 Black Anodized

1 Teardrop 08 Up to 8' Door 121 Dark Bronze Anodized

2 Flush 09 Up to 9' Door 130 Clear Anodized

10 Up to 10' Door

B1921, B1923 Reinforcing PivotsMODELS & FINISH US2G

B1921 1/2" to center line of 4" hinge. Pin uses small pin and bushing. $82.00

B1923 3/4" to center line of 4-1/2" hinge. Pin uses large pin and bushing. $68.00


PRODUCT NO. MODEL

B192 11 4"

3 4-1/2"

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

19EXIT DEVICES

EXIT DEVICESAlarmed Exit Device option cannot be combined with Device Options or Monitoring Options.

Split finishes (faceplate/pushbar) are not available.

8099 Dummy PushbarMODELS & FINISHES 313, 335, 628

US4, US32D US3, US32

8099-00 Dummy pushbar without mechanism, for doors NOT requiring an exit device.

$217.00 $468.00 $524.00

8099-M0 Active dummy bar without latching mechanism, without monitoring switches.

$287.00

8099-M1 Active dummy bar without latching mechanism, with switch. Can be wired normally open, or normally closed to operate maglock, alarm or similar.

$342.00 $593.00 $649.00

8099-M2 Active dummy bar without latching mechanism, with two switches. Can be wired normally open or normally closed to operate maglock, alarm or similar.

$407.00 $658.00 $714.00


PRODUCT NO. MONITOR DOOR TYPE PUSHBAR FINISH WIDTH US FINISH

8099 -M1 -3 0 36 -US3200 Inactive Dummy Bar 3 Aluminum 0 US Finish 30 30 inches US3 Bright Brass

M0 Active Dummy Bar, no monitoring switches 4 Wood or hollow metal 1 Clear Anodized 628 36 36 inches US4 Satin Brass

M1 Active Dummy Bar, one monitoring switch 2 Dark Bronze Anodized 313 42 42 inches US32 Bright Stainless

M2 Active Dummy Bar, two monitoring switches 3 Black Anodized 335 48 48 inches US32D Satin Stainless

3100, 8100 Surface Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8100 Surface vertical rod for wood and hollow metal doors $870.00 $1,121.00 $1,344.00

8100T Top rod only $795.00 $1,021.00 $1,219.00

3100 Fire-rated surface vertical rod $1,088.00 $1,346.00 $1,546.00

3100T Top rod only for metal doors $1,013.00 $1,246.00 $1,421.00

3100W Top rod only for wood doors $1,013.00 $1,246.00 $1,421.00


MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONSMONITORING

OPTION

DOOR OPENING WIDTHOn pair of doors, specify HALF

of the total exit openingUS FINISH END CAPS OPTIONFOR US FINISH

81 00 - SE M2 -30 -US32D MEC31 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching

End Caps81 Life-Safety 11 Clear Anodized 628

W Top Rod only - Wood doors

SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

22 Dark Bronze Anodized 313 - Standard rod

C Cylinder Dogging (non-fire rated devices ONLY) (Blank) No Monitor 42 42 inches US32 Bright Stainless

33 Black Anodized 335 ED Electric Dogging 48 48 inches US32D Satin Stainless

(Blank) No Option AXXB Alarmed Exit Device where XX is door opening width

* Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

20 EXIT DEVICES

8200 Narrow Stile Surface Vertical Rod Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8200 Narrow stile surface vertical rod exit device $816.00 $1,065.00 $1,290.00

8200T Top rod only $741.00 $965.00 $1,165.00

Kitted OptionsMODEL & FINISHES 313, 335, 628 US4, US32D US3, US32

8055 Tall door kit for doors up to 10' tall, for use with 8100, 8200 $110.00 $143.00 $182.00

MODEL & FINISHES 313, 335, 628 US32D US32

3055 Tall door kit for doors up to 10' tall, for use with 3100 $116.00 $151.00 $190.00


MODEL PUSHBAR FINISH ROD TYPE DEVICE OPTIONS MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF

of the total exit openingUS FINISH END CAPS OPTIONFOR US FINISH

82 00 - ED M2 -36 -US382 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

22 Dark Bronze Anodized 313 C Cylinder Dogging

(Blank) No Option 42 42 inches US32 Bright Stainless



3300, 8300 Mortise Exit Device MODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8300 Mortise type exit device $666.00 $1,000.00 $1,100.00

3300 Fire-rated mortise type $958.00 $1,200.00 $1,320.00

Kitted OptionsMODELS & FINISH US32D

8360-XX Long lip strike, for jambs that project outward 2-1/4" beyond centerline of door, stainless steel, for use with 8300 only

$57.00

4009-01 Open back strike for 1-3/4" thick doors $130.00


MODEL FACEPLATE FINISHFACE

SHAPE DEVICE OPTIONSMONITORING

OPTIONDOOR

HANDINGPUSHBAR

FINISH


of the total exit openingUS FINISH END CAPS OPTION

83 3 0 ED M -7 3 A36B33 Fire Rated 0 US Finish 0 Flat (3300 only)

LR Electric Latch Retraction M Single Switch 7 RHR 0 US Finish 30 30 inches US3 Bright Brass

MEC Matching End Caps

83 Life-Safety 1 Clear Anodized 6282 Bevel (8300 only)

SE Silent Electrification Latch Retraction M2 Dual Switch 8 LHR

1 Clear Anodized 628 36 36 inches US4 Satin Brass


C Cylinder Dogging (non-fire rated devices ONLY)

(Blank) No Monitor

2 Dark Bronze Anodized 313 42 42 inches

US32 Bright Stainless

3 Black Anodized 335 ED Electric Dogging

3 Black Anodized 335 48 48 inches

US32D Satin Stainless

- Without Options AXXB Alarmed Exit Device where XX is door opening width

*Please note that 30” exit devices cannot accommodate monitoring options, except when ordered in conjunction with the SE option.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

21EXIT DEVICES

8400 Narrow Stile Mortise Exit Device MODEL & FINISHES 313, 335, 628 US4, US32D US3, US32

8400 Mortise type exit device for single leaf $595.00 $885.00 $985.00

Kitted OptionsMODELS US32D

8455-01 Long face strike for covering MS strike prep $94.00

8460-17-630 Long lip strike for jambs that project outward 2-1/4" beyond the centerline of door $72.00

91-0995-02 * 2" thick door kit for use with 8300, 8400 $15.00

91-0995-03 * 2-1/4" thick door kit for use with 8300, 8400 $15.00



91-0995-06 * 3" thick door kit for use with 8300, 8400 $22.00

91-0325-01 Thermal door kit, 1/4" cladding, for use with 8400 $76.00

91-0325-02 Thermal door kit, 1/2" cladding, for use with 8400 $137.00

* Order 8360-xx or 8460-xx long lip strike kit separately as required.


MODEL FACEPLATE FINISH FACE SHAPE DEVICE OPTIONSMONITORING

OPTION BACKSETDOOR

HANDINGPUSHBAR

FINISH


of the total exit openingUS FINISH

END CAPS OPTION FOR

US FINISH

84 1 4 SE M2 -4 7 1 4284 Life-Safety 0 US Finish 0 Flat, Radius, Bevel

LR Electric Latch Retraction

M Single Switch 2 31/32" 7 RHR 0 US Finish 30 30 inches

US3 Bright Brass

MEC Matching End Caps

1 Clear Anodized 628

4 Radius w/Weatherstrip

SE Silent Electrification Latch Retraction

M2 Dual Switch 3 1-1/8" 8 LHR

1 Clear Anodized 628 36 36 inches

US4 Satin Brass


C Cylinder Dogging

(Blank) No Monitor 4 1-1/2"


42 42 inches US32 Bright Stainless

3 Black Anodized 335

ED Electric Dogging

3 Black Anodized 335 48 48 inches

US32D Satin Stainless


Radius with weatherstrip faceplate is not available in US finishes.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

22 EXIT DEVICES

3600, 8500 Metal Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8500 Concealed vertical rod exit device $620.00 $911.00 $958.00

8500T Top rod only $545.00 $811.00 $833.00

3600 Fire-rated concealed vertical rod $1,042.00 $1,271.00 $1,364.00

3600T Top rod only $967.00 $1,171.00 $1,239.00

Kitted Options

MODEL

3655 Tall door kit for doors taller than 66" above bar height, up to 10' $52.00





END CAPS OPTION FOR

US FINISH

85 00 T ED M -36 -US32D36 Fire Rated 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

85 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor 42 42 inches US32 Bright Stainless




8600 Narrow Stile Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8600 Concealed vertical rod exit device $583.00 $891.00 $932.00

8600T Top rod only $533.00 $811.00 $852.00

Kitted OptionsMODEL

8655 Tall door kit for doors up to 10’ for use with 8500, 8600 $50.00





END CAPS OPTION FOR

US FINISH

86 22 T SE M2 -3686 Life-Safety 00 US Finish T Top Rod only LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

22 Dark Bronze Anodized 313 C Cylinder Dogging

(Blank) No Monitor 42 42 inches US32 Bright Stainless



800.872.3267 • Fax 800.232.7329


www.adamsrite.com

23EXIT DEVICES

3700, 8700 Rim Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8700 Rim type exit device $429.00 $680.00 $724.00

3700 Fire-rated rim type $725.00 $919.00 $1,019.00


MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION



END CAPS OPTION FOR

US FINISHVOLTAGE

37 00 EL M1 -36 -US3 MEC -1237 Fire Rated 00 US Finish EL Electric Latch Retraction (indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass

MEC Matching End Caps 12 Volts

87 Life-Safety 01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts

02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless(For EL Option Only)




8800 Narrow Stile Rim Exit DeviceMODEL & FINISHES 313, 335, 628 US4, US32D US3, US32

8800 Rim type exit device $412.00 $656.00 $700.00

Kitted OptionsMODELS N/A 313, 628

3889-08 Mullion for doors up to 8' for use with 8700, 3700 $500.00

3889-10 Mullion for doors up to 10' for use with 8700, 3700 $600.00

3890-08 Aluminum mullion for doors up to 8' for use with 8800 $549.00

3890-10 Aluminum mullion for doors up to 10' for use with 8800 $572.00


MODEL PUSHBAR FINISH DEVICE OPTIONS MONITORING OPTION

DOOR OPENING WIDTH On pair of doors, specify HALF of

the total exit openingUS FINISH

END CAPS OPTION FOR

US FINISHVOLTAGE

88 01 C M2 -36 -1288 Life-Safety 00 US Finish EL Electric Latch Retraction (indicate 12V/24V) M Single Switch 30 30 inches US3 Bright Brass

MEC Matching End Caps 12 Volts

01 Clear Anodized 628 SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass 24 Volts

02 Dark Bronze Anodized 313 C Cylinder Dogging (Blank) No Monitor 42 42 inches US32 Bright Stainless (For EL Option Only)



800.872.3267 • Fax 800.232.7329


www.adamsrite.com

24 EXIT DEVICES

3900, 8900 Wood Door Concealed Vertical Rod Exit DeviceMODELS & FINISHES 313, 335, 628 US4, US32D US3, US32

8900 Wood door concealed vertical rod exit device $700.00 $1,020.00 $1,100.00

3900 Fire-rated wood door concealed vertical rod $1,115.00 $1,315.00 $1,500.00

Kitted OptionsMODEL

8955-01 Tall door kit for doors up to 10’ for use with 8900 $52.00

3955-01 Tall door kit for doors up to 10’ for use with 3900 $52.00





END CAPS OPTION FOR

US FINISH

89 00 W LR M2 -36 -US3239 Fire Rated 00 US Finish W Top Rod Wood LR Electric Latch Retraction M Single Switch 30 30 inches US3 Bright Brass MEC Matching End Caps

89 Life-Safety 11 Clear Anodized 628 - Standard rod SE Silent Electrification Latch Retraction M2 Dual Switch 36 36 inches US4 Satin Brass

22 Dark Bronze Anodized 313 C Cylinder Dogging (non-fire rated devices only) (Blank) No Monitor 42 42 inches US32 Bright Stainless




ACCESSORIES FOR EXIT DEVICESOPTIONS & FINISHES N/A US4, US32D US3, US32

SE Silent electrification motorized latch retraction $641.00

EL Electric latch retraction for use with 3700, 8700, 8800 rim exit devices $340.00

ELD Electric latch retraction with mechanical dogging for rim exit devices only $388.00

LR Electric latch retraction $582.00

ALARM Battery-operated alarmed exit device $447.00

M1 Request to exit - monitor/single signal switch $117.00

M2 Request to exit - monitor/double signal switch $175.00

C Cylinder dogging $47.00

ED Electric dogging $398.00

MEC Matching end caps $77.00 $99.00

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

25EXIT DEVICES • ELECTRIC STRIKES

KITTED OPTIONS FOR EXIT DEVICESMODELS & FINISHES N/A 313, 335, 628

US4, US32D

US3, US32

US26D, US3

ALARM EXIT KIT Kit for retrofitting an alarm function to an existing Adams Rite exit device. Includes new pushbar, end caps and installation hardware.

$565.00 $790.00 $832.00

91-0897-01 Single signal switch kit, retrofits to 3000/8000 $100.00

91-0897-02 Double signal switch kit, retrofits to 3000/8000 $160.00

26-0584-XXX-MP Sex bolts, 2 per bag, 2 kits required per exit device $20.00

MODIFICATION OPTIONS FOR EXIT DEVICESMODELS

THICK DOOR For doors thicker than 1-3/4" and/or door skins plus reinforcement thicker than those specified in the Adams Rite Master Reinforcement Sheet template, for CVR and mortise devices

$60.00

UNIQUE DOOR Cutting charges for non-standard lengths between 30" and 48" $80.00

NOTE: Thick door modification options are available for 8300, 8400, and 8600 model exit devices only.

ELECTRIC STRIKES

7100, 7101 Electric StrikesMODELS & FINISHES 313, 335, 628 626

es 7100

7100 For aluminum jambs $176.00 $200.00

7101 For radius aluminum stiles $176.00

7100-XX7, OR -XX9 Monitoring signal switches $276.00 $300.00

Lip Extensions up to 3” for center-hung or non-flush doors add $32.


PRODUCT NO.

FACEPLATE SHAPE VOLTAGE

CURRENT AND DUTY FEATURES* FINISH**

LIP EXTENSIONS (DIM. A)(Door Centerline to Jamb Edge)

710 0 -3 1 0 -628 -00

0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

7 Monitored/ Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"

9 Monitored/ Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"

*Fail-secure can be field converted to fail-safe or vice-versa. **7101 available in 628, 313, 335 only.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

26 ELECTRIC STRIKES

7110, 7111 Electric StrikesMODELS & FINISHES 652

7110 For wood jambs $210.00

7111 For wood jambs, long faceplate $212.00

7110-XX7, OR -XX9 Monitoring signal switches $310.00



PRODUCT NO.

FACEPLATE LENGTH VOLTAGE

CURRENT AND DUTY FEATURES* FINISH


711 0 -3 1 0 -652 -00

0 7-15/16" 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 652 Satin Chrome 00 1-1/16" or less 05 2"

1 10-1/4" 5 24 Volt 4 AC Intermittent 5 Fail-Safe 01 1-1/2" 07 2-1/4"

7 Monitored/ Fail-Safe 02 1-5/8" 09 2-1/2"

9 Monitored/ Fail-Secure 03 1-3/4" 12 2-7/8"

*Fail-secure can be field converted to fail-safe or vice-versa.

7130, 7131 Electric StrikesMODELS & FINISHES 313, 335, 628

7130 For aluminum jambs, pre-cut for MS lock strike $181.00

7131 For radius aluminum stiles, pre-cut for MS lock strike $181.00



PRODUCT NO.

FACEPLATE LENGTH VOLTAGE

CURRENT AND DUTY FEATURES* FINISH


713 0 -3 1 0 -313 -00

0 Flat 3 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

1 Radius 5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 01 1-1/2" 07 2-1/4"

628 Clear Anodized 02 1-5/8" 09 2-1/2"

03 1-3/4" 12 2-7/8"


800.872.3267 • Fax 800.232.7329


www.adamsrite.com

27ELECTRIC STRIKES

7140 Electric Strike

FITS STANDARDMOUNTING

TAB ANSI PREP

3/32"2.4mm

MODEL & FINISHES 313, 335, 628 626

7140 ANSI size for hollow metal and wood jambs $176.00 $200.00



PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES* FINISH


7140 -3 1 0 -628 -003 12 Volt 1 DC Continuous or Intermittent 0 Standard/Fail-Secure 313 Dark Bronze Anodized 00 1-1/16" or less 05 2"

5 24 Volt 4 AC Intermittent 5 Fail-Safe 335 Black Anodized 50 1-3/8" 07 2-1/4"

626 Satin Chrome 01 1-1/2" 09 2-1/2"

628 Clear Anodized 02 1-5/8" 12 2-7/8"

03 1-3/4"


7160 Electric StrikeMODELS & FINISHES 313, 335, 628 626

7160 For aluminum jambs $220.00 $245.00

7160-XX7 OR -XX9 Monitoring signal switches $320.00 $345.00







7 Monitor/Fail-Safe 626 Satin Chrome 02 1-5/8" 09 2-1/2"

9 Monitor/Fail-Secure 628 Clear Anodized 03 1-3/4" 12 2-7/8"


7170 Electric Strike

FITS STANDARDMOUNTING

TAB ANSI PREP

3/32"2.4mm

MODELS & FINISHES 313, 335, 628 626

7170 For hollow metal and wood jambs $220.00 $245.00

7170-XX7 OR -XX9 Monitoring signal switches $320.00 $345.00




LIP EXTENSIONS (DIM. A)Door Centerline to Jamb Edge



7 Monitor/Fail-Safe 626 Satin Chrome 01 1-1/2" 09 2-1/2"

9 Monitor/Fail-Secure 628 Clear Anodized 02 1-5/8" 12 2-7/8"

03 1-3/4"


800.872.3267 • Fax 800.232.7329


www.adamsrite.com

28 ELECTRIC STRIKES

7100 Series Electric Strike ComponentsSTRIKE BODY KITS

7103A-XXX $147.00

7173A-XXX $190.00

One strike body kit matched with one faceplate kit makes a complete electric strike.

FACEPLATE KITS & FINISHES 313,335, 628 US26D US3

FPK00 For use with body kits: 7103A, 7173A $30.00 $50.00 $53.00

FPK01 For use with body kit: 7103A $30.00

FPK10 For use with body kit: 7103A $63.00 $86.00

FPK11 For use with body kits: 7103A, 7173A $66.00 $89.00


FPK31 For use with body kits: 7103A, 7173A $34.00

FPK40 For use with body kit: 7103A $30.00 $50.00 $53.00

FPK45 For use with body kit: 7103A, for installing electric strike in previous prep, 4901, 4501 strike cover.

$33.00

Faceplate kits contain all hardware to mount electric strike.

KITTED OPTIONS

91-0171-01 through -13 Lip extension kits for use with 7100 through 7140 $32.00

91-0171-50 Lip extension kits for use with 7100 through 7140 interior framing systems $32.00

91-0172-01 through -13 Lip extension kits for use with 7160 and 7170 $32.00

91-0172-50 Lip extension kits for use with 7160 and 7170 interior framing systems $32.00

7100 LIP EXTENSION

LIP EXTENSION PART NUMBER APPLICABLE ELECTRIC STRIKES

91-0171-01 through -13 7100, 7110, 7111, 7130, 7140

91-0172-01 through -13 7160, 7170

91-0173-01 through -13 7108, 7128

7100 LIP EXTENSION DIMENSIONS

DASH PART NUMBER

DIMENSION ‘A’ – DOOR CENTERLINE TO JAMB EDGE

DASH PART NUMBER


DASH PART NUMBER


-00 1-1/16” -05 2” -10 2-5/8”

-01 1-1/2” -06 2-1/8” -11 2-3/4”

-02 1-5/8” -07 2-1/4” -12 2-7/8”

-03 1-3/4” -08 2-3/8” -13 3”

-04 1-7/8” -09 2-1/2”

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

29

ARM-014-01/14

ELECTRIC STRIKES

7240 Series Fire-Rated Electric StrikesMODELS & FINISH 630

7240 Fire-rated, for cylindrical latches $330.00

7240-50 Lip extension for interior frame systems $366.00

7240-XX9 Monitoring signal switches $430.00


PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH

LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge

for Interior Frames

7240 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less

5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"

*Not available fail-safe.

7270 Series Fire-Rated Electric StrikesMODELS & FINISH 630

7270 Fire-rated, for mortise latches $382.00

7270-50 Lip extension for interior frame systems $418.00

7270-XX9 Monitoring signal switches $482.00


PRODUCT NO. VOLTAGE CURRENT AND DUTY FEATURES FINISH

LIP EXTENSIONS (DIM. A)Door Centerline to Jam Edge

for Interior Frames

7270 -3 1 0 -630 -503 12 Volt 1 DC Continuous or Intermittent 0 Fail-Secure* 630 Satin Stainless 00 1-1/16" or less

5 24 Volt 4 AC Intermittent 9 Monitor/Fail-Secure 50 1-3/8"

*Not available fail-safe.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

30 ELECTRIC STRIKES

7400, 7401 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629 119, 121, 130

7400 For radius jambs $241.00 $266.00 $271.00 $275.00

7400-M Monitoring signal switches $341.00 $366.00 $371.00 $375.00

7401 For radius aluminum stiles $241.00

7401-M Monitoring signal switches $341.00


PRODUCT NO.

FACEPLATE SHAPE FEATURES FINISH

740 0 M 6280 Flat - None 7400 ONLY 7401 ONLY

1 Radius M Monitored 313 Dark Bronze Anodized 628 Clear Anodized 119 To match 335 Black Anodized

A Modular Pack - Body Kit* 335 Black Anodized 629 Bright Stainless 121 To match 313 Dark Bronze Anodized

605 Bright Brass 630 Satin Stainless 130 To match 628 Clear Anodized

606 Satin Brass

Fail-secure can be field converted to fail-safe or vice-versa. *Modular Packing Program - match body kit with faceplate kit to complete. Use 7400A for standard jambs and 7401A for radius stile mounting. No finish designation required.

7410, 7411 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630

7410 For wood jambs, 7-15/16" faceplate $270.00 $296.00

7410-M Monitoring signal switches $370.00 $396.00

7411 For wood jambs, 10-1/4" faceplate $270.00 $296.00



PRODUCT NO. FACEPLATE LENGTH FEATURES FINISH

741 0 - 6280 7-15/16" - None 313 Dark Bronze Anodized 628 Clear Anodized

1 10-1/4" M Monitored 335 Black Anodized 630 Satin Stainless

Fail-secure can be field converted to fail-safe or vice-versa.

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

31ELECTRIC STRIKES

7430, 7431 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 119, 121, 130

7430 For aluminum jambs, flat faceplate $247.00


7431 For aluminum stiles, radius faceplate $247.00

7431-M Monitoring signal switches. Not available in 119 finish. $347.00


PRODUCT NO. FACEPLATE SHAPE FEATURES FINISH

743 0 M 6280 Flat - None 313 Dark Bronze Anodized 119 To match 335 Black Anodized

1 Radius M Monitored 335 Black Anodized 121 To match 313 Dark Bronze Anodized

628 Clear Anodized 130 To match 628 Clear Anodized


7440 Ultraline Electric StrikesMODELS & FINISHES 313, 335, 628 630 606 605, 629

7440 For steel and wood, jambs and doors $241.00 $266.00 $271.00 $275.00

7440-M Monitoring signal switches $341.00 $366.00 $371.00 $375.00


PRODUCT NO. FEATURES FINISH

7440 M 628- None 313 Dark Bronze Anodized 606 Satin Brass 629 Bright Stainless

M Monitored 335 Black Anodized 628 Clear Anodized 630 Satin Stainless

605 Bright Brass


74R1 Ultraline Electric StrikesMODELS & FINISHES 119, 121, 130

74R1 For use with rim type exit devices with 3/4" latchbolt $327.00

74R1-M Monitoring signal switches $427.00


PRODUCT NO. FEATURES FINISH

74R1 M -130- None 119 To match 335 Black Anodized

M Monitored 121 To match 313 Dark Bronze Anodized

130 To match 628 Clear Anodized


800.872.3267 • Fax 800.232.7329


www.adamsrite.com

32

74R2 Ultraline Electric StrikeMODELS & FINISHES 119, 121, 130

74R2 For use with narrow stile rim type exit devices with 1/2" latchbolt $327.00


PRODUCT NO. FINISH

74R2 -130119 To match 335 Black Anodized

121 To match 313 Dark Bronze Anodized

130 To match 628 Clear Anodized

7400 Series Electric Strike ComponentsSTRIKE BODY KITS

7400A Standard body, for use with faceplate kits: FPK7400, FPK7410, FPK7411, FPK7430, FPK7440, FPK7445 $218.00

7401A Radius body, for use with faceplate kits: FPK7401, FPK7431 $218.00

Match one strike body kit with one faceplate kit to make a complete electric strike.

FACEPLATE KITS & FINISHES 313, 335, 628 630 606 605, 629 119, 121,130

FPK7400 For use with body kit: 7400A $24.00 $49.00 $50.00 $53.00






FPK7440 For use with body kit: 7400A $24.00 $49.00 $50.00 $53.00

FPK7445 For use with body kit:7400A $34.00

Faceplate kits contain all hardware to mount electric strike.

KITTED OPTIONS

LEK7400-01 Lip extension kits for use with 7400 series electric strikes $40.00

VA7400-16VDC 16V DC adapter kit required for all 7400 strikes when applying 16VDC $18.00

WDC7400 Wood door cover plate for use when mounting 7400 in the inactive leaf of a wood door pair (to simplify the mortising operation)

$12.00

ELX ElectroLynx™ Adapter to connect Adams Rite products to the ElectroLynx system $29.00


PRODUCT NO. LIP EXTENSIONS (distance from vertical centerline of the door in the closed position to the edge of the jamb)

LEK7400- -0001 1-1/2" 03 1-3/4" 05 2" 07 2-1/4" 09 2-1/2” 11 2-3/4" 13 3"

02 1-5/8" 04 1-7/8" 06 2-1/8" 08 2-3/8" 10 2-5/8" 12 2-7/8" 50 1-3/8"

ELECTRIC STRIKES

800.872.3267 • Fax 800.232.7329


www.adamsrite.com

33

TRIM

1000 Series TurnsMODELS & FINISHES 119, 121, 130

1000-01 OR -02 Turn for use with MS1847 deadlock $25.00

1000-11 OR -21 Turn and escutcheon for use with MS1847 deadlock $25.00

1004 Turn for use with 5015, 5017 deadlock $30.00

1015 Turn for use with 5015, 5017 deadlock $30.00

1016 Outside escutcheon $25.00


PRODUCT NO. TURN TYPE SPINDLE LENGTH FINISH

1000 -21 -14 -130TURN WITHOUT ESCUTCHEON

Furnished Unassembled

DASH CHART

NO. "L" MM NO. "L" MM

-11 17/32 13 -22 1-15/64 31-12 39/64 15 -23 1-19/64 33-13 43/64 17 -24 1-23/64 35-14 47/64 19 -25 1-27/64 36-15 51/64 20 -26 1-31/64 38-16 55/64 22 -27 1-33/64 39-17 59/64 23 -28 1-39/64 41-18 63/64 25 -29 1-43/64 42-19 1-3/64 26 -30 1-47/64 44-20 1-7/64 28 -31 1-51/64 46-21 1-11/64 30 -32 1-55/64 47

119 To match 335 Black Anodized

-01 Parallel Drive

-02 Pendicular Drive 121 To match 313 Dark Bronze Anodized

TURN WITH ESCUTCHEON Furnished Assembled 130 To match 628 Clear Anodized

-11 Parallel Drive

-21 Pendicular Drive

3000 Fixed PullMODELS & FINISH US32D

3001 Tubular fixed pull $190.00

3002 Flat fixed pull $207.00

HOW TO ORDER Specify quantity and the following information. Order related product

Adams Rite Architectural Hardware - Locksandsafesonline Rite... · products, Adams Rite, upon...

Documents

Transcript of Adams Rite Architectural Hardware - Locksandsafesonline Rite... · products, Adams Rite, upon...