ACE3600 Release 5 December 2011
-
Upload
oscar-escobar-figueroa -
Category
Documents
-
view
28 -
download
9
Transcript of ACE3600 Release 5 December 2011
![Page 1: ACE3600 Release 5 December 2011](https://reader035.fdocuments.us/reader035/viewer/2022073009/55cf9912550346d0339b638f/html5/thumbnails/1.jpg)
WRS RMC
RRReeellleeeaaassseee AAAnnnnnnooouuunnnccceeemmmeeennnttt Document release: December 5, 2011
This is to announce the release of:
ACE 3600 STS V15.50 + Service Pack 2 (SP2) CD (F7500 / FVN5567) General Notes:
1) All ACE 3600 models are now shipped with ACE3600 Firmware V15.02. 2) ACE 3600 RTUs with CPU 3680 should use Firmware V15.02 and above. 3) ACE3600 Firmware V15.02 requires ACE 3600 STS V15.50 + SP2. 4) Downgrading Firmware V15.02 using STS V14.50 requires powering on the RTU in
bootstrap mode (refer to STS manuals)
SSSoooffftttwwwaaarrreee RRReeellleeeaaassseee NNNooottteeesss
ACE 3600 STS V15.50 + Service Pack 2 (SP2) CD This CD includes:
STS V15.50 installation
STS V15.50 Service Pack 2 (SP2) installation. Refer to the STS V15.50 and SP2 release notes below.
ACE3600 Firmware Version 15.02
New Features and Enhancements compared to V15.00
MOTOTRBO: Supporting both original and new USB Configuration descriptor protocol in MOTOTRBO radios with version 1.07 and above.
Issues in Firmware V15.01 corrected in Firmware V15.02
I/O module configuration parameters after restart: When an I/O module is not in its slot at start up time and is then inserted, the module parameters (e.g. filter settings) are not updated until the next power up. Module parameters are set to default values for the interim period of time (between insertion and power up).
CPU3680 rarely does not recognize its I/O module: In rare cases, CPU3680 does not recognize its I/O module at start up.
Service Pack 2 for ACE3600 STS Version R15.50 Service Pack 2 (SP2) is an add-on installation to ACE3600 System Tools Suite (STS) V15.50.
New Features and Enhancements
Adds to the STS firmware V15.02.
ACE3600 Release Announcement 5 December 2011.pdf