Industrial Robots Solutions Brochure Robots Solutions Brochure
Access Solutions Brochure
-
Upload
essentra-components -
Category
Devices & Hardware
-
view
81 -
download
0
Transcript of Access Solutions Brochure
www.essentracomponents.com
Access Solutionswww.essentracomponents.com
AustraliaTel : +61 02 96380100Fax : +61 02 96844521sales@essentracomponents.com.auwww.essentracomponents.com.au
China Tel : +86 400 679 3666Fax : +86 400 679 [email protected]
IndiaTel : +91 (0) 80 4545 3676Fax : +91 (0) 80 4545 [email protected]
JapanTel : +81 45 321 2752Fax : +81 45 410 [email protected]
MalaysiaTel : +60 4 6435 846Fax : +60 4 6438 370Toll free: 1800 88 [email protected]
Singapore Tel : +65 6841 3266Fax : +65 6841 [email protected]
ThailandTel : +66 2 81 99 501 Fax : +66 2 81 99 [email protected]
Group Code: 206 Swing Handle
BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6GFR 30CYLINDER: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelSEAL: Rubber
• Sliding dust cover• Ergonomic handle• Padlockable version available• 40 mm Euro Profile cylinder fitted
• Large version available• For steel and polyester cabinets• 40 mm Euro Profile single-cylinder fitted• Padlockable version available
APPLICATIONSElectric panels, machinery covers
Mesan was acquired by Essentra in 2014 and forms part of the Components division. Essentra focuses on the manufacture and distribution of high-volume, essential components, which serve customer in a wide variety of end markets and geographies.
ELECTRICAL ENCLOSURES
A wide range of locks, hinges and accessories for indoor and outdoor cabinets, all with excellent security
1IT ENCLOSURES
High-security products that protect an organisation’s data
GENERATORS-COMPRESSORS
Heavy-duty products with numerous benefits including noise isolation and reducing vibration
INDUSTRIAL MACHINERY
Cost-effective machine safetyproducts that provide real value
Padlock applicationSpecial sliding cover is available for padlockable version
APPLICATIONSElectric panels, machinery covers, rack cabinets
Group Code: 001 Swing Handle
www.essentracomponents.com
BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6 GFR 30CAM: SteelSEAL: Polyurethane
32
www.essentracomponents.com www.essentracomponents.com
Group Code: 102
Group Code: 502
Swing-Handle Gear
Swing-Handle Gear Box
BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30HANDLE: Polyamide DIN-EN ISO1043-1 PA6 GFR 30MECHANISM: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelSEAL: Polyurethane
BODY: Zamak DIN-EN1774-ZnAl4Cu1HANDLE: Zamak DIN-EN1774-ZnAl4Cu1MECHANISM: Zamak DIN-EN1774-ZnAl4Cu1SEAL: Polyurethane
• Swing handle for steel and polyester cabinets• 40 mm Euro Profile single cylinder fitted• Padlockable version available
• Die-cast construction stronger than polyamide• Thin external profile, 14.4 mm, for flush appearance• High-security, brass, Euro Profile single-cylinder
available• Dust cap available• Padlockable version available• Stainless steel version available
Dust cap and padlockable versions available
For different colours, contact us now!
For 42 mm Euro Profile single cylinder, contact us now!
Group Code: 063 Cam Lock
• Quarter-turn operation• Body length 20.5 mm (Please be sure to order
appropriate cam)• Available in all die-cast zinc alloy or with polyamide
housing
APPLICATIONSElectric panels, machinery covers
Group Code: 016 Push-to-Close Lock
Striking plate- Custom sizes available
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: Rubber
APPLICATIONSElectric panels, machinery covers
APPLICATIONSElectric panels, outdoor cabinets
BODY: SteelHANDLE: SteelCAM: BrassSCREW: Stainless steelSEAL: PolyurethaneFINISH: Black coated
• Slam-shut operation• Brass cam• Striking plate required• Can open from inside by moving cam
APPLICATIONSGenerators, compressors, electric panels, machinery covers
54
www.essentracomponents.com www.essentracomponents.com
Group Code: 072
Group Code: 071
Functional Lock
Sliding Lock
BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30CAM: Steel or PA6 GFR 30
BODY: ABSSPRING: Stainless Steel
• Suitable for steel and polyester panels• Standard cut out for both versions• Clip fixing version suitable for panels with thickness
of between 0.8 mm and 2 mm
• Easy fixing• Long-lasting stainless steel spring• Suitable for panel thicknesses of between 0.8 mm
and 1.5 mm
Group Code: 077
Group Code: 060
Compression Lock
Quarter Turn - Spring Loaded Lock
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30DRIVER: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: RubberFINISH: Chrome or Black coated
• Specially designed internal spring provides 1.5 mm of compression
• Cam does not rotate beyond quarter turn due to stop lip
APPLICATIONSElectric panels, machinery covers
APPLICATIONSElectric panels, machinery covers
APPLICATIONSSmall metal machinery covers
BODY: Zamak DIN-EN1774-ZnAl4Cu1HANDLE: Zamak DIN-EN1774-ZnAl4Cu1FIXING BRACKET: Steel
• Available with or without cylinder• 24mm – 46mm grip adjustment• Suitable for maximum 2 mm door thickness• Assemble lock with one fixing bracket• Stainless steel version available
APPLICATIONSGenerators, compressors, electric panels, machinery covers
76
www.essentracomponents.com www.essentracomponents.com
Group Code: 362 Group Code: 064 Quarter Turn-Wing Knob
Compression Lock
Quarter Turn-Wing Knob
Group Code: 050 Cam Lock Group Code: 040
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30KNOB: Zamak DIN-EN1774-ZnAl4Cu1 or PA6 GFR 30CAM: Steel or PlasticGASKET: RubberFINISH: Chrome or Black coated
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelFINISH: Chrome plated
Wing operates lock and serves as knob
• Special index action to assist locking and keep cam in position
• Stable in open position
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1DRIVER: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISH: Chrome or Black coated
• Used for cabinets that require better sealing under vibrating conditions
• 6 mm of compression• Wide grip range with adjustable screw• Noise isolation• Different drivers / cams available
APPLICATIONSElectric panels, machinery covers
APPLICATIONSElectric panels, machinery covers
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1DRIVER: Zamak DIN-EN1774-ZnAl4Cu1CAM: Zamak DIN-EN1774-ZnAl4Cu1GASKET: RubberFINISH: Chrome or Black coated
• For soundproof or isolated doors• Tight closure achievable with 270° cam rotation
and stepped cam• Lock supplied with standard housing
APPLICATIONSCentral air conditioning units, isolated panels
APPLICATIONSE lec t r ic pane ls , mach iner y covers , ra i lway applications, construction equipment.
98
www.essentracomponents.com www.essentracomponents.com
Group Code: 065 Quarter Turn- Wing Knob Cam Lock - T Handle
Group Code: 340 Group Code: 013Compression Lock-Wing Knob Fire-Hose Cabinet Lock
Group Code: 110
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1KNOB: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelGASKET: RubberFINISH: Chrome or black coated
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: Steel or PlasticGASKET: Rubber
• Used for cabinets that require better sealing under vibrating conditions
• Provides 6 mm of compression• Provides noise isolation• Standard cams without stopper required for these
locks
• Quarter-turn operation• Available in all die-cast zinc alloy or with polyamide
wing knob and housing• Optional blind version
HOUSING: Zamak DIN-EN1774-ZnAl4Cu1CAM: Steel or PlasticGASKET: Rubber
• Quarter-turn operation• Available in all die-cast zinc alloy or with polyamide
wing handle and housing• Optional blind version• Stainless steel version available
APPLICATIONSRailway applications, construction equipment, electric panels, machinery covers
APPLICATIONSElectric panels, machinery covers
BODY: Zamak DIN-EN1774-ZnAl4Cu1KNOB: Zamak DIN-EN1774-ZnAl4Cu1CAM: SteelFIXING PLATE: Steel
• Designed for fire-hose cabinets• Special fixing-plate supplied for easy fixing• Flush design provides flat surface on cabinet• Customized colours available
APPLICATIONSFire hose cabinet
APPLICATIONSElectric panels, machinery covers
1110
www.essentracomponents.com www.essentracomponents.com
Group Code: 193
Group Code: 493
Group Code: 194Side Hinge (16 mm) Concealed Hinge
Side Hinge Group Code: 995 Concealed Hinge
• Side-mounted hinge• Brass 16 mm parts• Parts tightly fitted• Stainless steel version available
BODY: Zamak DIN-EN 1774-ZnAl4Cu1Pin (Version 1): Zamak DIN-EN1774-ZnAl4Cu1Pin (Version 2): Stainless Steel
• Lift-off hinge• Suitable for left- and right-hand applications• Maximum hinge rotation 180°• For heavy doors, version 2 is recommended due to
its stainless steel properties
BODY: SteelWELDING PART: Zamak DIN-EN1774-ZnAl4Cu1
FINISHBODY: Zinc platedWELDING PART: Zinc plated
• Suitable for heavy-duty applications• Suitable for left- and right-hand applications• Suitable for 25 mm bend door cabinets• Door part can be removed by a screw
APPLICATIONSElectric panels, machinery covers
BODY: Zamak DIN-EN1774-ZnAl4Cu1FIXED PART: SteelBODY FINISHING: Zinc platedWELDING PART: Copper plated
• For doors with a bend of between 18 mm and 27 mm• Centre part copper plated for easy welding• The centre part available in different versions
APPLICATIONSElectric panels, machinery covers
APPLICATIONSElectric panels, machinery covers
1312
www.essentracomponents.com www.essentracomponents.com
Group Code: 295
Group Code: 289
Group Code: 097
Group Code: 600
Concealed Hinge
Concealed Hinge
Corner Hinge
HVAC Hinge (2D)
MATERIALSteel
FINISHBODY: Zinc platedWELDING PART: Copper plated
BODY: Stainless Steel (AISI 304)PIN: Stainless Steel (AISI 303)
• For internally mounted doors• Spring-loaded hinge for easy door removal• Both versions either screwed or welded on• Suitable for left- and right-hand applications
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: SteelBEARING: DelrinFINISH: Black coated
• Designed for plain, side-mounted doors• For side-mounted doors with a bend of 0-15 mm• Hinge supplied pre-assembled to decrease labour
costs• Two-dimensional door adjustments possible• Axial adjustment is ± 2 mm. Radial adjustment is ± 1 mm
FIXED, MOVABLE PARTS: Zamak DIN-EN1774-ZnAl4Cu1PIN: Steel or poliasetal (Delrin)FINISH: Chrome plated or black coated
• Corner hinge• Suitable for steel panels with a thickness of
between 1.0 mm and 2.2 mm• Hinge pin available in three types• Stainless steel version available
APPLICATIONSSmall electric panels
APPLICATIONSCentral air conditioning units, electric panels, machinery covers
• For doors with a bend of between 20 mm and 24 mm• Frame part screwed on, door part welded on• Suitable for left- and right-hand applications• Stainless steel version available
APPLICATIONSElectric panels, machinery covers
1514
www.essentracomponents.com www.essentracomponents.com
Group Code: 299
Group Code: 399
Group Code: 1399
Group Code: 899
Leaf Hinge Leaf Hinge
Leaf Hinge Leaf Hinge
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Stainless Steel
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Stainless Steel
• Generally used for plain /flush-mounted, isolated, heavy doors
• Stud versions fitted with M8 x 14 mm threaded stud
• Stainless steel (AISI 304) hinge pin• Available in three sizes, stud fixing: – 80 mm x 70 mm – 80 mm x 110 mm – 80 mm x 150 mm
APPLICATIONSGenerators, machinery covers, electric panels
• Generally used for plain / flush mounted doors• Stud versions fitted with M5 x 8.5 mm threaded
stud• Stainless steel (AISI 304) hinge pin.• Maximum hinge rotation 270°• Stainless steel version available
APPLICATIONSElectric panels, built-in covers
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Stainless Steel
• Generally used for plain /flush-mounted, isolated heavy doors
• Stud versions fitted with M8 x 14 mm threaded stud
• Stainless steel (AISI 304) hinge pin• Available in three sizes, hole or stud fixing: – 60 mm x 60 mm – 60 mm x 90 mm – 60 mm x 120 mm
BODY: SteelPIN: SteelFINISH: Zinc plated or black coated
• Heavy-duty lift off hinge• Suitable for left- and right-hand applications• Opening angle 180°
APPLICATIONSGenerators, machinery covers, electric panels
APPLICATIONSGenerators, machinery covers, electric panels
1716
www.essentracomponents.com www.essentracomponents.com
Group Code: 2399
Group Code: 2199
Group Code: 800
Group Code: 599
Adjustable Torque Hinge HVAC Hinge (3D)
Torque Hinge Leaf Hinge
BODY: Polyamide DIN-EN ISO1043-1 PA6 GFR 30SCREWS AND NUTS: Stainless Steel (AISI 304)
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: SteelBEARING: DelrinFINISH: Black coated
• Suitable for three-dimensional door adjustment• Can be used for flush doors
APPLICATIONSCentral air conditioning units, electric panels, machinery covers
• Hinge torque can be adjusted with screw• Provide position control• Suitable for left- and right-hand applications• Fixed with M4 screw
APPLICATIONSGenerally used for plain /flush-mounted doors
BODY: Zamak DIN-EN1774-ZnAl4Cu1PIN: Steel
• 3.4 Nm symmetric torque• Over 25,000 cycle life within ± 20% of static torque
specification• Suitable left- and right-hand applications• M5 screw mounting
BODY: Stainless Steel (AISI 304)PIN: Stainless Steel (AISI 303)
• Generally used for plain / flushmounted, isolated, heavy doors
• Both parts attached by screws or nuts and bolts• Hinge Rotation angle 180°
APPLICATIONSGenerators, machinery covers, electric panelsAPPLICATIONS
Display panels, office equipment, medical equipment, industrial
www.essentracomponents.com
1918
www.essentracomponents.com
Group Code: 085 Group Code: 387
Group Code: 287 340.09.202
Drawer Handle Cover Handle
Cover Handle Gasketing
Group Code: 086 340.09.002Cover Handle Gasketing
For different colours and dimensions, contact us now!
FIXING PART: Polyamide DIN-EN ISO1043-1 PA 6 GFR 30HANDLE: Aluminium
• Grip range: 2.0 - 4.0mm• 50m / roll• Over 60 types available
Black EPDMPolyamide DIN-EN ISO 1043-1 PA 6 GFR 30
Zamak DIN-EN 1774-ZnAl4Cu1FINISH: Chrome or black coated
FIXING PART: Polyamide DIN-EN ISO1043-1 PA 6 GFR 30HANDLE: Plastic-coated steel
APPLICATIONSWooden and metal furniture
Stylish handle for keyboard shelf in rack cabinets
APPLICATIONSMachinery covers
• Plastic-coated steel tube• Centre supports should be used for handle lengths
of 1000 mm or more
APPLICATIONSMachinery covers
• Two different fixing types • Grip range: 1.0 - 3.0mm• 100m / roll• Over 60 types available
APPLICATIONSMachinery covers
• Ergonomic elliptical geometry• Matte anodized aluminium
Black EPDM
For different colours and dimensions, contact us now!
www.essentracomponents.com
2120
www.essentracomponents.com
340.09.210
340.09.902
340.09.678
Gasketing
Gasketing
Gasketing
Our products are developed with the current and future needs of our customers in mind. Our main objective is to be a solutions partner for our customers, by delivering a full range of products with different styling, colours, materials and functionality.
Your Solutions Partner
Black EPDM
Black EPDM
Black EPDM
• Grip range: 1.5 - 3.0mm• 50m / roll• Over 60 types available
• Width: 7.5mm, Height: 16.6mm• 100m / roll• Over 60 types available
• Grip range: 1.5 - 4.0mm• 50m / roll• Over 60 types available
R&D and Production
Quality
Our quality system is ISO 9001-2008 certified and our products are manufactured to comply with RoHS standards. We meet our obligations concerning the Registration, Evaluation, Authorisation, andRestriction of Chemicals (REACH).
Our access solutions product range can be customised to meet your needs. In addition to this catalogue you may also be interested in our standard parts catalogue detailing an extremely broad range of components available for immediate dispatch.