Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and...

4
Access Control System NEXSENTRY 4100 CONTROLLER 8-DOOR CONTROLLER WITH MIRO OPTIONS ®™ U.S. Registered Trademark Copyright © 1998 WSE All Rights Reserved SPECIFICATION DATA Advanced technology controller NEXSENTRY 4100 CONTROLLER redefines the state-of-the art for access control technology. Advanced digital technology, easy installation, modular components, and an affordable price make NexSentry Controller the right solution for managing even the most demanding access control applications. NexSentry Controller’s embedded 32-bit Intel ® microprocessor is a giant step in access control technology that gives it superfast and accurate control of up to eight doors. A four-door version is also available (see NexSentry 4104 Controller data sheet). Other advanced features include: card capacity options for up to 50,000 cardholders; independent PIN entry for each card holder; assignable door lock relays, and; optional elevator control. Modular and open architecture NexSentry Controller’s modular architecture allows flexible system design options for tailoring secure and dependable access control solutions for any facility, regardless of size. Support for proximity, magnetic stripe, keypad, biometric, and smart card access control technologies at each door allows for easy integration of custom applications at each door. A NexSentry Wiegand Interface Unit (WIU) allows facilities with Wiegand physical interface systems to upgrade to WSE’s advanced digital technology while keeping intact the current wiring scheme of the security network. The optional NexSentry WIU module also makes NexSentry Controller able to operate with many third party readers. Easy installation Twisted-pair wiring greatly reduces the cost and difficulty of installing an access control system and allows up to a 4,000 foot distance between NexSentry Controller and its readers. While providing an advanced access control solution, NexSentry Controller is also economically priced so any organization can implement an advanced multiple technology system at a cost similar to less secure single technology systems. FEATURES Fully integrated access control system Advanced digital technology with embedded Intel ® 32-bit microprocessor provides fastest response time in the industry Support for multiple access technologies: - Digital proximity - Magnetic Stripe - Smart Card - Keypad - Biometrics Modular MIRO options for easy customization and expansion: - MIRO 16/8 - MIRO 32/0 - MIRO 2/24 - MIRO 4/2 20,020 cardholder capacity, expandable to 50,000 S-Net dual twisted-pair wire installation Can be wired to accommodate a Wiegand physical interface Modular components allow for easy upgrade to future technologies Independent PIN codes Elevator control option Available as a UL-294 listed system Hard/soft anti-passback with “forgiveness” Manual lock/unlock from terminal or host Normal and reverse lock operation Printer interface Dial-up host Printed in U.S.A. on recycled paper containing at least 10% post-consumer paper fibers

Transcript of Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and...

Page 1: Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and specifications nexsentry miro 16/8 nexsentry miro 32/0 nexsentry miro 2/24 nexsentry

Access Control SystemNEXSENTRY 4100 CONTROLLER

8-DOOR CONTROLLER WITH MIRO OPTIONS

®™ U.S. Registered TrademarkCopyright © 1998 WSE • All Rights Reserved

SPECIFICATION DATA

Advanced technology controller

NEXSENTRY 4100 CONTROLLER redefines the state-of-the art for access control technology. Advanced digitaltechnology, easy installation, modular components, and an affordable price make NexSentry Controllerthe right solution for managing even the most demanding access control applications. NexSentryController’s embedded 32-bit Intel® microprocessor is a giant step in access control technology that givesit superfast and accurate control of up to eight doors. A four-door version is also available (seeNexSentry 4104 Controller data sheet). Other advanced features include: card capacity options for up to50,000 cardholders; independent PIN entry for each card holder; assignable door lock relays, and;optional elevator control.

Modular and open architecture

NexSentry Controller’s modular architecture allows flexible system design options for tailoring secure anddependable access control solutions for any facility, regardless of size. Support for proximity, magneticstripe, keypad, biometric, and smart card access control technologies at each door allows for easyintegration of custom applications at each door. A NexSentry Wiegand Interface Unit (WIU) allowsfacilities with Wiegand physical interface systems to upgrade to WSE’s advanced digital technology whilekeeping intact the current wiring scheme of the security network. The optional NexSentry WIU modulealso makes NexSentry Controller able to operate with many third party readers.

Easy installation

Twisted-pair wiring greatly reduces the cost and difficulty of installing an access control system andallows up to a 4,000 foot distance between NexSentry Controller and its readers. While providing anadvanced access control solution, NexSentry Controller is also economically priced so any organizationcan implement an advanced multiple technology system at a cost similar to less secure single technologysystems.

FEATURES

• Fully integrated access control system

• Advanced digital technology withembedded Intel ® 32-bit microprocessorprovides fastest response time in theindustry

• Support for multiple access technologies:

- Digital proximity- Magnetic Stripe- Smart Card- Keypad- Biometrics

• Modular MIRO options for easycustomization and expansion:

- MIRO 16/8- MIRO 32/0- MIRO 2/24- MIRO 4/2

• 20,020 cardholder capacity, expandable to50,000

• S-Net dual twisted-pair wire installation

• Can be wired to accommodate a Wiegandphysical interface

• Modular components allow for easyupgrade to future technologies

• Independent PIN codes

• Elevator control option

• Available as a UL-294 listed system

• Hard/soft anti-passback with“forgiveness”

• Manual lock/unlock from terminal or host

• Normal and reverse lock operation

• Printer interface

• Dial-up host

Printed in U.S.A. on recycled papercontaining at least 10% post-consumer paper fibers

Page 2: Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and specifications nexsentry miro 16/8 nexsentry miro 32/0 nexsentry miro 2/24 nexsentry

92995100009 rev. 1198spbd 2

NEXSENTRY 4100 CONTROLLER

CONTROLLER SPECIFICATIONS

Database:• Key codes: 20,020• Key codes with upgrade: 50,000• Access codes: 120• User-defined holidays: 30• User-defined reports: 32• Time intervals: 128• Authorization levels: 6• Individual operator IDs: 8• Transaction buffer:

- 4,000 maximum in securitymanagement system port

- 100 circular in Terminal port• MIRO modules: up to 9 per

controller, with maximumsupport for 32 inputs and 24outputs

• Inputs: Monitor points, stationswitches, tamper, power fail,alarm, etc.

• Relay outputs: building mode,latched alarm and others

• Microprocessor: Intel 32-bitindustrial microprocessor

• Expansion Bus for memoryupgrade or systemenhancement

• Self-protection: Power inputfailures, controller tampering

Dimensions:• Board: 7 X 15 X 1.5 in.

(17.8 X 38.1 X 3.8 cm)• Enclosure: 7.6 X 16.8 X 2 in.

(19.3 X 42.7 X 5 cm)

Environment:• Temperature: 20° to 120° F

(-7° to 49° C)• Humidity: 0 to 95% non-

condensing

Power:• Source: Via twisted pair

(shielded) wiring from a powersupply unit

• Consumption: Less than 5 wattswith 17 to 28 volts d.c.

• Every S-Net device requires 16VDC minimum for power

Communications:• S-Net devices: RS-485 through

the system’s twisted pairshielded wiring

• Security Management System orprinter: SEEP Protocol throughRS-232 port or 20mA currentloop interface

• Terminal: ASCII throughTerminal Port

Twisted pair wire

LEGENDRS-232

Security centeror alarm central station

AC input

up to

eig

ht d

oors

per

Nex

Sen

try

Con

trol

ler

Parking lot Main entrance Cafeteria Manufacturing

Lock Lock

INSensor loop

Door switch

Motion sensor (REX)

Glass breakdetector

Fire sensor

Alarm Alarm

OUTSensor loop

Gate arm

WSESecurityManagementSystem

RS-485 S-NET

Door switch

Motion sensor (REX)

Glass breakdetector

Fire sensor

Door switch

Motion sensor (REX)

Glass breakdetector

Fire sensor

Lock

Alarm

DigiReader(DR 4238)

DigiReader(DR 4205)

Magnetic Stripew/ Keypad(MSRK 42)

Keypad DigiReader(DR 4205)

Videomonitor

Video switcherCCTVcamera

CCTVcamera

Power supply

To additionalS-NET device

S A M P L E S Y S T E M CONFIGURATION—D I G I T A L P R O X I M I T Y W I T H KEYPAD AND MAGNETIC STRIPE

Wiring:• Dual twisted pair (shielded

comm)• Supports Wiegand physical

interface with NexSentry WIU• S-Net data channel up to

4,000 feet• Mounting: Board-only or with

optional enclosure

Connectors:• Security Management System:

1-9 pin D-sub DTE and 1-20mAloop

• Terminal port: 9-pin D-sub DCE• S-Net Communications:

2-Phoenix-type• Power supply: Phoenix-type• MIRO units: Phoenix-type

Diagnostics:• LED status lights:

- Operational status of thecontroller

- Lock status of controlledentries

Power Supply

Host/RS-232

Host/20 mA

Termina l /RS-232

S-Net/RS-485

1 - 8 readersor keypads*

*Maximum 8 readers tota l with future expandabi l i ty to 16 readers per control ler

S-Net/RS-485

24 Volt Relay Output

Relay Output

Monitor Input

Monitor Input

Monitor Input

Monitor Input

S-Net/RS-4851 - 8 readersor keypads*

PANEL ARCHITECTURE—NEXSENTRY 4100 CONTROLLER WITH MIRO 16/8

Page 3: Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and specifications nexsentry miro 16/8 nexsentry miro 32/0 nexsentry miro 2/24 nexsentry

8-DOOR ACCESS CONTROL SYSTEM

3

NEXSENTRY MIRO OPTIONS AND SPECIFICATIONSNEXSENTRY MIRO 16/8

NEXSENTRY MIRO 32/0

NEXSENTRY MIRO 2/24

NEXSENTRY MIRO 4/2

8/61ORIM 0/23ORIM 42/2ORIM 2/4ORIM

stuptuOyaleR denepOyllamroN8yllamroNro)ON(

partsaiv)CN(desolCnoitisop

enoN syalerCmroF42 syalerCmroF2

stupnIrotinoM rotinometats-ruof61stniop

rotinometats-ruof23stniop

rotinometats-ruof2stniop

rotinometats-ruof4stniop

draoBsnoisnemid snoisnemid snoisnemid snoisnemid snoisnemid

.ni52.1X51X5)mc2.3X1.83X7.21(

.ni52.1X51X5)mc2.3X1.83X7.21(

.ni52.1X51X5)mc2.3X1.83X7.21(

epyt-MSMnidetnuoMerusolcne

erusolcnEsnoisnemid snoisnemid snoisnemid snoisnemid snoisnemid

.ni88.1X57.61X36.5)mc8.4X6.24X3.41(

.ni88.1X57.61X36.5)mc8.4X6.24X3.41(

.ni88.1X57.61X36.5)mc8.4X6.24X3.41(

.ni33.1X65.7X88.5)mc4.3X2.91X9.41(

ytidimuH gnisnednoc-non%59ot0

gnitnuoM niroylnodraoBerusolcne

niroylnodraoBerusolcne

niroylnodraoBerusolcne

erusolcneepyt-MSM

erutarepmeT )C°94ot°7-(F°021ot°91

ecruosrewoP teN-SaivrellortnoCotdetcennoc)lanoitpognidleihs(riapdetsiwT

rewoPnoitpmusnoc noitpmusnoc noitpmusnoc noitpmusnoc noitpmusnoc

htiwsttaw3nahtsseLCDstlov82ot61

htiwttaw1nahtsseLCDV82-61

sttaw21nahtsseLCDV82-61htiw

syalerllahtiwWm512evitca

gniriW detsiwT:srotcennoC)lanoitpognidleihs(riap

:stupnIrotinoMepyt-xineohP

:stuptuOyaleRepyt-xineohP

detsiwT:srotcennoC)lanoitpognidleihs(riap

:stupnIrotinoMepyt-xineohP

enoN:stuptuOyaleR

detsiwT:srotcennoC)lanoitpognidleihs(riap

:stupnIrotinoMepyt-xineohP

:stuptuOyaleRepyt-xineohP

detsiwT:srotcennoC)lanoitpognidleihs(riap

:stupnIrotinoMepyt-xineohP

:stuptuOyaleRepyt-xineohP

noitacinummoC riapdetsiwtdedleihsaivsnoitcennocteN-S2hguorht584-SR

* For specification information on NexLine Plus (MIRO 4/0), NexSentry Wiegand Interface Unit, and DR 4205W, please see their respective data sheets

S A M P L E S Y S T E M CONFIGURATION —ANALOG-TO-DIGITAL CONVERSION WITH NEXLINE PLUS (MIRO 4/0) *

S A M P L E S Y S T E M C O N F I G U R A T I O NW I E G A N D U P G R A D E W I T H N E X S E N T R Y W I U A N D D R 4 2 0 5

Page 4: Access Control System - Honeywell · 8-door access control system 3 nexsentry miro options and specifications nexsentry miro 16/8 nexsentry miro 32/0 nexsentry miro 2/24 nexsentry

92995100009 rev. 1198spbd 4

NEXSENTRY 4100 CONTROLLER

The future of access control

ORDERING INFORMATION

USA: 510 360-7902Intercontinental: 510 360-7894European: 510 360-7850

Order # Description

Controller92410010000 NexSentry 4100 8-door controller

board only92410010200 NexSentry 4100 8-door controller

in modular enclosure

MIRO options92410020000 MIRO 16/8 board only92410020200 MIRO 16/8 board in modular enclosure92410025200 MIRO 4/2 board in modular MSM-type

enclosure92410251000 MIRO 32/0 board only92410021200 MIRO 32/0 board in modular enclosure92410023000 MIRO 2/24 board only92410023200 MIRO 2/24 board in modular enclosure

Enclosure options92410085000 Large cabinet w/ installation labor charges92410085000 Large cabinet w/ installation labor charges

• NexSentry 4100 8-doorcontroller board only

• NexSentry 4100 8-doorcontroller in modular enclosure

MIROs• MIRO 16/8 board only or with

enclosure• MIRO 4/2 board in MSM-type

enclosure• MIRO 32/0 board only or in

modular enclosure• MIRO 2/24 board only or in

modular enclosure

Cabinet• Large cabinet (Non-UL)• Large cabinet w/ installation

labor charges

Communication device• CI-1/CI-8• NexLine• NexLine Plus (MIRO 4/0)• NexStar• NexSentry Wiegand Interface

Unit (WIU)

WSE EuropeOestergade 21DK-4700 NaestvedDenmark45-55-77136645-55-771235 Fax

WSE47102 Mission Falls CourtFremont, CA 94539510 360-7900510 360-7820 Faxhttp://www.wse.com

Security ManagementSystems• NexSentry Command Center• NexSentry Manager• SE 5850

Readers• DigiReader Series Digital

Proximity Readers• DR 4205W Wiegand Reader• DR 4200K Keypad• MSR42 Series magnetic stripe/

keypad readers• VIP 2000 Fingerprint Reader

Credentials• QuadraKey• NexKey• DuraKey• KeyMate• DuraTag

Power Supplies• Low cost power supply• PI-1 (115v)• PI-2 (230V)• Universal Low-Cost Power

Supply

Complete system solutions for access control and security management

Components and options

Security ManagementSystems

Readers CredentialsAccess ControlSystems