Monk's Home Improvements Exterior Painting: Windows and Trim
A-Series Exterior Trim Cross Section Details
Transcript of A-Series Exterior Trim Cross Section Details
A-SERIES EXTERIOR TRIM
4 1/2" (114) flat with 1" (25) extended corner
3 1/2" (89) flat with flush corner
End caps are handed as
viewed from the exterior.
3 1 ⁄ 2" Flat and 4 1 ⁄ 2" Flat
Formula for dimension of window/door plus exterior trim:
Add 4 1 ⁄4" (108) per side for 4 1 ⁄2" (114) flat
Add 3 1 ⁄4" (83) per side for 3 1 ⁄2" (89) flatFor A-Series patio
doors, end caps are
used at the sill.
3 ⁄16"(5)
4 1⁄ 2
"(1
14)
1 1 ⁄ 2"(38)
1⁄ 4" (6)
4 1 ⁄ 2" (114) Flat
A-Series Frenchwood®
Hinged Inswing Patio Door
3 1⁄ 2
"(8
9) 1
⁄ 4" (6)
1 1 ⁄ 2"(38)
3 ⁄16"(5)
A-SeriesDouble-Hung Window
3 1 ⁄ 2" (89) Flat
Vertical Section4 1 ⁄2" (114) Flat Trim at Head
A-Series Frenchwood® Hinged Inswing Patio Door
Vertical Section3 1 ⁄2" (89) Flat Trim at Sill
A-Series Double-Hung Window
Trim DetailsScale 3" (76) = 1'-0" (305) — 1:4
Vertical Section3 1 ⁄2" (89) Flat Trim at Head
A-Series Frenchwood® Hinged Inswing Patio Door
3 1⁄ 2
"(8
9)
1 1 ⁄ 2"(38)
3 ⁄16"(5)
1⁄ 4" (6)
3 1 ⁄ 2" (89) Flat
A-Series Frenchwood®
Hinged Inswing Patio Door
Field-Applied Attachment Strip
Field-applied attachment strip
fastens to framing through window
or patio door installation flange and
flashing tape with screws. Exterior
trim connects securely to the
field-applied attachment strip. Follow
window & patio door installation
guides for flashing instructions.
Factory-applied trim �angefor A-Series windows
1 3 ⁄ 8"(35)
3 1⁄ 2
"(8
9)
A-Series Double-HungWindow
Field-appliedattachment strip
1 3 ⁄ 8"(35)
3 1⁄ 2
"(8
9)
1 3⁄ 4"
(44)
Installation�ange
A-SeriesFrenchwood®
Hinged Patio Door
Window and Patio Door Attachment
Factory-Applied Trim Flange
Factory-applied trim
flanges are also available.
Exterior trim connects
securely to the trim flange
already in place.
•Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your Andersen supplier.•Dimensions in parentheses are in millimeters.•Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
2019 A-Series Product Guide Page 1 of 3
A-SERIES EXTERIOR TRIM
Corner key used
at corner joints.
Brick mould with mitered corners
Brick Mould
Formula for dimension of window/door plus exterior trim:
Add 1 3 ⁄4" (44) per side for brick mould
Sill nose and 3 1/2" (89) flat with 1" (25) extended corner
Sill nose and 3 1/2" (89) flat with flush corner
Sill Nose
Formula for dimension of window plus exterior trim:
Add 1 15 ⁄16" (49) for sill nose
For A-Series patio doors,
end caps are used at the sill.
End caps are handed as
viewed from the exterior.
Sill Nose
A-SeriesDouble-Hung Window
1 1
5⁄ 16
"(4
9) 3⁄ 16
"(5
)
5 ⁄8"(16)
1 7⁄8"(48)
Vertical SectionSill Nose/A-Series Double-Hung Window
Trim DetailScale 3" (76) = 1'-0" (305) — 1:4
7⁄16"(11)
2" (51)
1 3 ⁄4"(44)
1⁄ 4" (6)
Brick Mould
A-Series Frenchwood®
Hinged Inswing Patio Door
Vertical SectionBrick Mould at Head
A-Series Frenchwood® Hinged Inswing Patio Door
Trim DetailsScale 3" (76) = 1'-0" (305) — 1:4
Vertical SectionBrick Mould at Sill
A-Series Double-Hung Window
7⁄16"(11)
2" (51)
1 3 ⁄4"(44)
1⁄ 4" (6)
A-SeriesDouble-Hung Window
Brick Mould
•Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your Andersen supplier.•Dimensions in parentheses are in millimeters.•Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.
2019 A-Series Product Guide Page 2 of 3
A-SERIES EXTERIOR TRIM
For A-Series patio
doors, end caps are
used at the sill.
3 3 ⁄4" (95) mull cover is available for
installations where windows or patio doors
have been installed into separate rough
openings to obtain a joined appearance.
•Typical trim combinations shown. Additional combinations may also be used. Some restrictions apply. For more information contact your Andersen supplier.•Dimensions in parentheses are in millimeters.•Details are for illustration only and are not intended to represent product installation methods or materials. Refer to product installation guides at andersenwindows.com.•Consult with an architect or structural engineer regarding minimum requirements for structural support members between adjacent rough openings.
A-Series Double-Hung Window
4 1 ⁄4"(108)
3"(76)
3 ⁄8"(10)
3 ⁄8"(10)
A-Series Double-Hung Window
3 3⁄ 4" (95)Mull Cover
Mull Cover
Horizontal SectionA-Series Double-Hung Windows with Mull Cover
Separate Rough Opening DetailScale 3" (76) = 1'-0" (305) — 1:4
1⁄ 8" (3)
2 9 ⁄16"(68)
A-Series Frenchwood®
Hinged Inswing Patio Door
3 5 ⁄ 8" (92) Cornice3 5⁄ 8"
(92)
5 ⁄ 16"(8)
4 1 ⁄16"(103)
Vertical Section3 5 ⁄8" (92) Cornice over 3 1 ⁄2" (89) Flat
A-Series Frenchwood® Hinged Inswing Patio Door
2 1 ⁄4"(57)
15⁄ 16
"(2
4)
15 ⁄16"(24)
3 ⁄4"(19)
A-Series Frenchwood®
Hinged Inswing Patio Door
Decorative Drip Cap
Vertical SectionDecorative Drip Cap over 3 1 ⁄2" (89) Flat
A-Series Frenchwood® Hinged Inswing Patio Door
DetailsScale 3" (76) = 1'-0" (305) — 1:4
2"(51)
2" (51) Cornice
A-Series Frenchwood®
Hinged Inswing Patio Door
3 1 ⁄4"(83)
2" (51)
5 ⁄ 16"(8)
1⁄ 8" (3)
Decorative Drip Cap
Vertical Section2" (51) Cornice over 3 1 ⁄2" (89) Flat
A-Series Frenchwood® Hinged Inswing Patio Door
Flange
Flange
3 5/8" (92) cornice over 3 1/2" (89) flat
2" (51) cornice over 4 1/2" (114) flat
5 ⁄16"(8)
1 ⁄4"(6)
Integrated Flange
Decorative drip cap over 3 1/2" (89) flat
Cornices
5 ⁄16"(8)
2019 A-Series Product Guide Page 3 of 3