A Lutin-Wetzlar projectwork Autumn 2017l-w4.sigmundovaskola.cz/data/hostedit2/userfiles/Final...
Transcript of A Lutin-Wetzlar projectwork Autumn 2017l-w4.sigmundovaskola.cz/data/hostedit2/userfiles/Final...
A Lutin-Wetzlar projectwork
Autumn 2017
PROJECTWORK DESCRIPTION
• In total, there are 50 students
• Four teams are formed, eachteam is divided into four more groups (CAD, CNC, Workshop, Documentation)
• There is also a separatevideodocumentation group
2/27
PROJECTWORK DESCRIPTION• The project name is „The green
outlet - Small wind power plants island options“
• The task was to create a stand forwind power plant and alogo ofeach team milled in plexiglass, luminated by LEDs powered by thepowerplant.
3/27
THE PROFESSIONALS
4/27
• Robin Schnacken-
winkel
Nico Krug
Philipp Schneider
Anna Rosenberger
Tim Stöckl
Niklas Preußner
• Jan Pišťák
Michal Zbořil
Milan Vojáček
Jiří Koudelík
Marie Vojáčková
Matyáš Blažek
OUR TEAMSTEAM 1
5/27
• Numan Akinti
Max Kühlwein
Sandro Find
Philipp Mathes
Ilayda Erisik
Katharina Klemenz
• Petr Jalůvka
Václav Metelka
Josef Válek
Radim Baďura
Zdeněk Dostál
Tomáš Kappel
OUR TEAMSTEAM 2
6/27
• Tim Wilhelm
Patrick König
Marvin Lux
Leon Schmidt
Moritz Ott
Enis Sancar
• Tomáš Sotorník
Jakub Crhák
Filip Veisgäber
Petr Ambrůz
Jiří Tkadlec
Ondřej Folk
OUR TEAMSTEAM 3
7/27
• Petr Hanák
Stanislav Šesták
Matěj Škoda
Nicolas Tóth
Antonín Pekr
OUR TEAMS
• Felix Biemer
Norwin Kersting
Marian Müller
Lukas Knetsch
Max Bender
Tim Watz
TEAM 4
8/27
CAD GROUPS
9/27
Jan Pišťák, Petr Jalůvka, Tomáš Sotorník, Jan Kupka, Stanislav Šesták
Robin Schnacken-winkel, Nico Krug, Numan Akinti, Tim Wilhelm, Felix Biemer, Norwin Kersting
VISUALIZING OUR IDEAS
10/27
• Model all the needed
parts using a 3D CAD
software
• Create sheets for the
CNC group
FINISHED 3D MODELS
11/27
FINISHED 3D MODELS
12/27
CNC GROUPS
13/27
Michal Zbořil, Václav Metelka, Josef Válek, Jakub Crhák, Matěj Škoda
Philipp Schneinder, Max Kühlwein, Patrick König, Marian Müller
PROGRAMMING IN PROGRESS
14/27
• Create a CNC
program to mill the
plates and engrave
the decoration
• Take care of the
milling proces
including machine
setup
MILLED PLATES
15/27
MILLED PLATES
16/27
WORKSHOP GROUPS
17/27
Milan Vojáček, Jiří Koudelík, Radim Baďura, Zdeněk Dostál, Filip Veisgäber, Petr Ambrůz, Nicolas Tóth
Anna Rosenberger, Tim Stöckl, Sandro Find, Philipp Mathes, Marvin Lux, Leon Schmidt, Lukas Knetsch, Max Bender
FINAL TOUCHES
18/27
• Making final
modifications
• Assemblying parts
together
• Improving overall
design and quality
DOCUMENTATION GROUPS
19/27
Marie Vojáčková, Matyáš Blažek, Tomáš Kappel, Odřej Folk, Jiří Tkadlec, Antonín Pekr
Niklas Preußner, Ilayda Erisik, Katharina Klemenz, Moritz Ott, Enis Sancar, Tim Watz
2
4
RECORDING OUR WORK
20/27
• Taking photos and
videos
• Making team
presentations
• Decorating the
pinboards
• Filling team folders
with documents
VIDEODOCUMENTATIONGROUP
21/27
• Recording,
editing and
producing the
final projectwork
video
Selim Rudolph, Julia Ponkratz
OUR FINISHED PRODUCTS
22/27
OUR FINISHED PRODUCTS
23/27
OUR FINISHED PRODUCTS
24/27
• This projectwork marks the 20th anniversary of our internationalcooperation
• Over 1 300 hours (81 900 minutes) were spent by working in total
• Over 1 000 people attended the projectoworks in total
• Over 32 000 kilometers were travelled during our projectworks, that‘s more than ¾ the length of Earth‘s equator
DID YOU KNOW?
25/27
• The European Commission support for the production of this publication does not constitute an endorsement of the contents which reflects the views only of the authors, and the Commission cannot be held responsible for any use which may be made of the information contained therein
26/27
ANNOUNCEMENT
We hope you enjoyed our little presentation and we wouldlike to wish you a nice rest of your day.
27/27
THANK YOU FOR YOUR ATTENTION!