CO₂

A green Compressor– clean thinking …

MAKING MODERN LIVING POSSIBLE

REFRIGERATION & AIR CONDITIONING DIVISION

CO₂ Compressor– tailored for light commercial applications and heat pumps

Our ultra-efficient new CO₂ reciprocating compressor was created in response to increasing customer interest in alternative refrigerants, especially for bottle coolers, vending machines and heat pumps.

This was a special challenge, but one that our engineers responded to with imagination and energy. The unique thermodynamic properties of CO₂ mean that using it as a refrigerant at ambient temperatures above 30°C is tricky. The transcritical system operations required meant we had to create not only a capable compressor, but also a new system control strategy and heat exchanger concept.

Product advantages Customer benefits

• Lownoiselevel

• Environmentallyfriendlynaturalrefrigerant

• Lowenergyconsumption

• Highcoolingcapacity

• HighCOP

• Highproductquality

• Technologyinnovation

• Lowsoundemission

• CO₂isanaturalgasandhasnoimpactontheenvironment

• Lowrunningcost

• Ensuresthequalityofyourproduct

• Increasesinnovationincustomer’sownproduct

220-240V 50Hz 115V 60Hz

C

E

8614

AB

0.98

"(2.

5)

4.19"(106.5) 3.91"(99.3)

6.26

"(15

9)

ø0.75"(19)

ø0.38"(9.7)

ø0.63"(16)

6.69"(170)

7.01"(178)

8.03"(204)

6.50"(165)

7.32"(186)

2.76

"(70

)

5.91

"(15

0)

1.38

" (35

)4"

(101

.6)

5"(1

27)

5"(127)

2.44"(62)

2.91

"(74

)

8.46"(215)

G

B1

40°

C

EG

Type labels & symbol drawings

106BTN1410

R744

8605

-5DANFOSS COMPRESSORS

Yellow background

White stripe

Application

Approvals

Barcode onwhite background

0002serial number

106BTN1410

R744

8611

-3DANFOSS COMPRESSORS

Green background

White stripe

Application

Approvals

Barcode onwhite background

0004serial number

General

Code number 106B0001

Approvals EN 60335-2-34

Compressors on pallet –

Application

Application MBP

Frequency Hz 50 60

Evaporating temperature °C -15 to 7.2 –

Voltage range V 198 - 254 –

Max. discharge pressure bar 120 –

Max. winding temperature continuous (short) °C 125 (135) –

Cooling requirements

Frequency Hz 50 60

Application LBP MBP HBP LBP MBP HBP

32°C – F2 – – – –

38°C – F2 – – – –

43°C – F2 – – – –

Motor

Motor type CSR

LRA(ratedafter4sec.UL984),HST|LST A 20.2 –

CutinCurrent,HST|LST A 20.2 –

Resistance,main|startwinding(25°C) Ω 3.8 13.7

Design

Displacement cm3 0.92

Oil quantity (type) cm3 250 (polyolester)

Maximum refrigerant charge g

Free gas volume in compressor cm3 700

Weight without electrical equipment kg 15.5

Dimensions

Height mm A 190

B 185

B1 127

B2 –

Suction connector location/I.D.mm|angle C 6.5|0°

material|comment Steel|Alcap

Process connector location/I.D.mm|angle D –

material|comment –

Discharge connector location/I.D.mm|angle E 2.2|0°

material|comment Steel|flexible

Oil cooler connector location/I.D.mm|angle F –

material|comment –

Connector tolerance I.D. mm ±0.09

Remarks: -Thedischargeconnectorisaø3.2mmflexiblepipe.- Rated pressure burst disk G: 130 bar

TN1406MBP CompressorR744, 220-240V 50Hz

106B0002

EN 60335-2-34

–

MBP

50 60

-15 to 7.2 –

198 - 254 –

120 –

125 (135) –

50 60

LBP MBP HBP LBP MBP HBP

– F2 – – – –

– F2 – – – –

– F2 – – – –

CSR

20.2 –

20.2 –

3.8 13.7

1.54

250 (polyolester)

700

15.5

A 190

B 185

B1 127

B2 –

C 6.5|0°

Steel|Alcap

D –

–

E 2.2|0°

Steel|flexible

F –

–

±0.09

TN1410MBP CompressorR744, 220-240V 50Hz

106B0012

EN 60335-2-34

–

MBP

50 60

-15 to 7.2 –

198 - 254 –

120 –

125 (135) –

50 60

LBP MBP HBP LBP MBP HBP

– F2 – – – –

– F2 – – – –

– F2 – – – –

CSR

20.2 –

20.2 –

3.8 13.7

1.85

250 (polyolester)

700

15.5

A 190

B 185

B1 127

B2 –

C 6.5|0°

Steel|Alcap

D –

–

E 2.2|0°

Steel|flexible

F –

–

±0.09

TN1412MBP CompressorR744, 220-240V 50Hz

106B0003

EN 60335-2-34

–

MBP

50 60

-15 to 7.2 –

198 - 254 –

120 –

125 (135) –

50 60

LBP MBP HBP LBP MBP HBP

– F2 – – – –

– F2 – – – –

– F2 – – – –

CSR

20.2 –

20.2 –

3.8 13.7

2.46

250 (polyolester)

700

15.5

A 190

B 185

B1 127

B2 –

C 6.5|0°

Steel|Alcap

D –

–

E 2.2|0°

Steel|flexible

F –

–

±0.09

TN1416MBP CompressorR744, 220-240V 50Hz

S = Static cooling normally sufficientO = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessarySG = Suction gas cooling normally sufficient– = not applicable in this area

EN 12900 35°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 67 96 130 143 170 217 270 310 331 400 480 519

Power cons. in W 157 179 201 208 222 241 256 264 267 274 275 275

Current cons. in A 1.45 1.52 1.60 1.63 1.68 1.74 1.79 1.82 1.83 1.85 1.86 1.86

COP in W/W 0.43 0.54 0.65 0.69 0.77 0.90 1.05 1.17 1.24 1.46 1.75 1.89

20°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 87 123 168 185 221 283 355 408 438 535 649 707

Power cons. in W 157 179 201 208 222 241 256 264 267 274 275 275

Current cons. in A 1.45 1.52 1.60 1.63 1.68 1.74 1.79 1.82 1.83 1.85 1.86 1.86

COP in W/W 0.55 0.69 0.84 0.89 1.00 1.17 1.39 1.55 1.64 1.95 2.36 2.57

EN 12900 35°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 164 219 282 306 355 438 531 599 637 756 892 959

Power cons. in W 241 276 312 324 346 373 395 404 408 413 410 407

Current cons. in A 1.95 2.07 2.20 2.24 2.31 2.41 2.48 2.52 2.53 2.55 2.54 2.53

COP in W/W 0.68 0.79 0.90 0.94 1.03 1.17 1.34 1.48 1.56 1.83 2.18 2.36

20°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 211 282 365 396 461 571 697 791 842 1010 1207 1306

Power cons. in W 241 276 312 324 346 373 395 404 408 413 410 407

Current cons. in A 1.95 2.07 2.20 2.24 2.31 2.41 2.48 2.52 2.53 2.55 2.54 2.53

COP in W/W 0.88 1.02 1.17 1.22 1.33 1.53 1.76 1.96 2.06 2.45 2.94 3.21

EN 12900 35°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 198 263 339 367 426 526 638 720 765 908 1072 1152

Power cons. in W 289 332 375 389 415 449 474 486 490 496 493 489

Current cons. in A 2.12 2.27 2.42 2.47 2.56 2.67 2.76 2.80 2.82 2.84 2.83 2.83

COP in W/W 0.69 0.79 0.90 0.94 1.03 1.17 1.35 1.48 1.56 1.83 2.17 2.36

20°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 254 338 438 475 553 686 838 950 1012 1213 1450 1569

Power cons. in W 289 332 375 389 415 449 474 486 490 496 493 489

Current cons. in A 2.12 2.27 2.42 2.47 2.56 2.67 2.76 2.80 2.82 2.84 2.83 2.81

COP in W/W 0.88 1.02 1.17 1.22 1.33 1.53 1.77 1.95 2.07 2.45 2.94 3.21

EN 12900 35°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 281 370 473 512 592 726 877 986 1046 1238 1457 1564

Power cons. in W 399 454 508 526 558 599 629 643 647 653 646 640

Current cons. in A 2.50 2.69 2.88 2.94 3.05 3.20 3.30 3.35 3.37 3.38 3.36 3.34

COP in W/W 0.70 0.81 0.93 0.97 1.06 1.21 1.39 1.53 1.62 1.90 2.26 2.44

20°C at gas cooler outlet,220V,50Hz,fancoolingF2, preliminary data, LBP not approved

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 361 477 612 663 768 947 1151 1301 1384 1653 1971 2131

Power cons. in W 399 454 508 526 558 599 629 643 647 653 646 640

Current cons. in A 2.50 2.69 2.88 2.94 3.05 3.20 3.30 3.35 3.37 3.38 3.36 3.34

COP in W/W 0.90 1.05 1.20 1.26 1.38 1.58 1.83 2.02 2.14 2.53 3.05 3.33

TN1406, MBP Compressor, R744, 220-240V 50Hz

TN1410, MBP Compressor, R744, 220-240V 50Hz

TN1412, MBP Compressor, R744, 220-240V 50Hz

TN1416, MBP Compressor, R744, 220-240V 50Hz

Mounting accessories Code number

Bolt joint for one compressor Ø: 16 mm 107B9150

Bolt joint in quantities Ø: 16 mm –

Snap-on in quantities Ø: 16 mm –

M

1 1

2 2N NL L

5

4

2

1

Start winding

Main winding

Windingprotector

Thermostat Fan

a2

Bleeder resistance

c

a3

e

8606

CSR

e

a2

c

a3TOP

b

Accessories for

TN1406TN1410TN1412TN1416

Figure Code number

Starting device 470 mm cable length a3 117-7081

Cover b 103N2022

Starting relay a2 Componentsof starting

deviceStart. capacitor 80 µF c

Run capacitor 10 µF e

Test conditions

TN1406TN1410TN1412TN1416

Discharge pressure 90 bar

Gas cooler outlet temperature 20°C / 35°C

Suction gas temperature 20°C

General

Code number 106B0004

Approvals –

Compressors on pallet –

Application

Application MBP

Frequency Hz 50 60

Evaporating temperature °F – 5 to 45

Voltage range V – 95 - 127

Max. discharge pressure bar – 120

Max. winding temperature continuous (short) °F – 257 (275)

Cooling requirements

Frequency Hz 50 60

Application LBP MBP HBP LBP MBP HBP

90°F – – – – F2 –

100°F – – – – F2 –

110°F – – – – F2 –

Motor

Motor type CSIR/CSR

LRA(ratedafter4sec.UL984),HST|LST A 53.0 –

CutinCurrent,HST|LST A 53.0 –

Resistance,main|startwinding(77°F) Ω 0.9 2.9

Design

Displacement cu.in 0.09

Oil quantity (type) fl.oz. 8.5 (polyolester)

Maximum refrigerant charge oz.

Free gas volume in compressor fl.oz. 23.7

Weight without electrical equipment lbs. 30.9

Dimensions

Height inch A 7.48

B 7.28

B1 5.00

B2 –

Suction connector location,I.D.in.|angle C 0.252-0.259|0°

material|comment Cu-platedsteel|Alcap

Process connector location,I.D.in.|angle D –

material|comment –

Discharge connector location,I.D.in.|angle E 0.09|0°

material|comment Steel|flexible

Oil cooler connector location,I.D.in.|angle F –

material|comment –

Remarks: -Thedischargeconnectorisaø0.13inchflexiblepipe.- Rated pressure burst disk G: 130 bar

TN1410MBP CompressorR744 , 115V 60Hz

106B0005

–

–

MBP

50 60

– 5 to 45

– 95 - 127

– 120

– 257 (275)

50 60

LBP MBP HBP LBP MBP HBP

– – – – F2 –

– – – – F2 –

– – – – F2 –

CSIR/CSR

53.0 –

53.0 –

0.9 2.9

0.15

8.5 (polyolester)

23.7

30.9

A 7.48

B 7.28

B1 5.00

B2 –

C 0.252-0.259|0°

Cu-platedsteel|Alcap

D –

–

E 0.09|0°

Steel|flexible

F –

–

TN1416MBP CompressorR744 , 115V 60Hz

ø0 75"(19)

ø0 38"(9.7

ø0 63"(16

6 69"(1707 01"(178)8 03"(204

6 50"(165)7 32"(186)

2.76

"(70)

5.91

"(150

)

138

"(35)

4"(1

01.6

)5"

(127

)

5"(127

C

E

86 4

AB

0.98

"(2.5

)

8 46"(215)

G

B1

4 19"(106.5) 3 91"(99.3)

6.26

"(159

)

2 44"(62)

2.91

"(74)

40°

C

EG

S = Static cooling normally sufficientO = Oil cooling F1 = Fan cooling 1.5 m/s (compressor compartment temperature equal to ambient temperature)

F2 = Fan cooling 3.0 m/s necessarySG = Suction gas cooling normally sufficient– = not applicable in this area

EN 12900 95°F (35°C) at gas cooler outlet,115V,60Hz,fancoolingF2, preliminary data

Evap. temp. in °F -49 -40 -31 -22 -13 -10 -4.0 5 14 20 23 32 41 45 50 59 68

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 546 655 733 776 913 1068 1142

Power cons. in W 516 538 547 550 552 545 538

Current cons. in A 6.14 6.29 6.35 6.37 6.38 6.34 6.29

COP in W/W 1.06 1.22 1.34 1.41 1.65 1.96 2.12

68°F (20°C) at gas cooler outlet,115V,60Hz,fancoolingF2, preliminary data

Evap. temp. in °F -49 -40 -31 -22 -13 -10 -4.0 5 14 20 23 32 41 45 50 59 68

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 712 860 967 1027 1219 1444 1556

Power cons. in W 516 538 547 550 552 545 538

Current cons. in A 6.14 6.29 6.35 6.37 6.38 6.34 6.29

COP in W/W 1.38 1.60 1.77 1.87 2.21 2.65 2.89

EN 12900 95°F (35°C) at gas cooler outlet,115V,60Hz,fancoolingF2, preliminary data

Evap. temp. in °F -49 -40 -31 -22 -13 -10 -4.0 5 14 20 23 32 41 45 50 59 68

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 910 1092 1222 1293 1521 1779 1904

Power cons. in W 812 851 866 872 876 863 851

Current cons. in A 8.30 8.60 8.72 8.76 8.79 8.69 8.60

COP in W/W 1.12 1.28 1.41 1.48 1.74 2.06 2.24

68°F (20°C) at gas cooler outlet,115V,60Hz,fancoolingF2, preliminary data

Evap. temp. in °F -49 -40 -31 -22 -13 -10 -4.0 5 14 20 23 32 41 45 50 59 68

Evap. temp. in °C -45 -40 -35 -30 -25 -23.3 -20 -15 -10 -6.7 -5 0 5 7.2 10 15 20

Capacity in W 1187 1433 1612 1711 2031 2406 2594

Power cons. in W 812 851 866 872 876 863 851

Current cons. in A 8.30 8.60 8.72 8.76 8.79 8.69 8.60

COP in W/W 1.46 1.68 1.86 1.96 2.32 2.79 3.05

Test conditionsTN1410TN1416

Discharge pressure 90 bar

Gas cooler outlet temperture 68°F / 95°F (20°C / 35°C)

Suction gas temperature 68°F (20°C)

TN1416, MBP Compressor, R744 , 115V 60Hz

TN1410, MBP Compressor, R744 , 115V 60Hz

CSR

Start windingMainwinding

Thermostat Fan

a2

Bleeder resistance

c

a3

e

M

1 1

2 2N NL L

5

4

2

1

SR

C

1

Motorprotector

e

a2

c

a3

TOP

b

8610

f

Accessories forTN1410TN1416

Figure Code number

Starting device assembly

a3CSR 23.6 in. cable length 117-7082

CSIR 23.6 in. cable length –

Cover b 103N2022

Starting relay a2 Componentsof starting

deviceStart. capacitor 410 µF c

Run capacitor 23.5 µF e

Protector f 117U3212

Mounting accessories Code number

Bolt joint for one compressor Ø: 5/8 in. 107B9150

Bolt joint in quantities Ø: 5/8 in. –

Snap-on in quantities Ø: 5/8 in. –

CO₂ valve for lightcommercial applications

Filter drier forcommercial applications

Danfoss A/S © – G1 Advertising 08.08.UF.JN.paaDEHC.PB.550.A3.02/520N0640 compressors.danfoss.com

as more and more major soft drinks manufacturers demand improved energy efficiency and environmental perform-ance, they are increasingly looking for refrigerantalternatives toHFCs.CO₂hasproved itself a good alternative, creating an excellent, cost-effective solution to this challenge.

Vending machines:

Heatpumps:air or ground sourced heat pumps are highly responsive to energy savings. Compact, lightweight and high-perform-ance designs can be made to deliver high thermal efficiency. By introducing CO₂ as a refrigerant, heat pumps achieve even better results, making CO₂ a good solution for this type of application.