A gear with teeth designed to mesh with the threads of the gear and cause it to rotate
4
A gear with teeth designed to mesh with the threads of the gear and cause it to rotate Worm Gear They are utilized to reduce the speed of something
description
Worm Gear. A gear with teeth designed to mesh with the threads of the gear and cause it to rotate. They are utilized to reduce the speed of something. Spur Gear. a gear having radial teeth parallel to the axle also a spur wheel. Used in. Crown Gear. - PowerPoint PPT Presentation
Transcript of A gear with teeth designed to mesh with the threads of the gear and cause it to rotate
A gear with teeth designed to mesh with the threads of the gear and cause it to rotate
Worm Gear
They are utilized to reduce the speed of something
Spur Geara gear having
radial teeth parallel to the axle
also a spur wheel
Used in
Crown GearA gear in which the gears project at right angles to each other causing motion
Used in mechanical clocks
Rotary MotionThe act of rotating as if on an axis
Gears are an example
When one is moving in linear motion and the other in rotary motion
![1 .1 I ], · PDF fileLubrication Chart 6. TABLE I - Gear Set-ups for Odd Threads and Feeds __ 7 ... threading and every lathe operation ... Change gear set-ups are shown on Pages 7](https://static.fdocuments.us/doc/165x107/5aa510797f8b9a517d8cbf7b/1-1-i-chart-6-table-i-gear-set-ups-for-odd-threads-and-feeds-7-threading.jpg)
