800-567-0404 | NorwoodSawmills.com

PRIC

ELIS

T 20

17

800-567-0404 | NorwoodSawmills.com

2 Your Norwood Sawmill is in Stock! Order Today and Get Milling! Don’t Wait Any Longer to Turn Your Trees into Money.

LumberPro HD36PORTABLE BAND SAWMILL

LumberMate LM29PORTABLE BAND SAWMILL

LumberMan MN26PORTABLE BAND SAWMILL

PortaMill PM14CHAINSAW SAWMILL

28”/71cm36”/92cm

22”/56cm29”/74cm

17”/43cm26”/66cm

8”/20cm14”/36cm

Then, tailor your mill to match your sawmilling needs – Customize it with the combination of attachments that meet your unique wood-processing demands.

It’s almost guaranteed that your milling operation will grow. Because you can add attachments anytime, now or ten years from now, your Norwood bandmill gives you flexibility to take on even bigger jobs down the line.

Decide which Norwood bandmill is right for you.

Pick Your Sawmill

3NorwoodSawmills.com800-567-0404

Item No. Description PriceHD36-PR016G LumberPro HD36 with 16hp (479cc) Briggs & Stratton V-Twin OHV electric-start engine $8787.00 $7697.00HD36-PR023G LumberPro HD36 with 23hp (627cc) Briggs & Stratton V-Twin OHV electric-start engine $9567.00 $ 8197.00

LUMBERPRO HD36 - Engine Options For a limited time ONLY

Pro equipped with optional attachments

LUMBERPRO HD36


LUMBERPRO HD36 - Manual Optional Attachments Check out the catalog for more info! Pages 28-31

Item No. Description PriceLM34-41150 Trailer/Support Jack Package (Set of 6) $1687.00

LM34-41170 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension) $385.00

LM34-41130 4-Foot Bed Extension – Permanent $467.00

LM34-41140 2-Foot Bed Extension – Detachable $247.00

LM34-41400 Log Loading/Rolling & Ramp Package $897.00

LM34-41285B Roller Toe Boards – Manual (Set of 2) $767.00

41287 Board Offloading Rollers (Set of 4) $269.00

41289 Automatic Dogging Assist $149.00

41291 Log Rest Actuators (Set of 2) $397.00

41295 Rapid-Dogging & Rolling System (Set of 2) $567.00

LM34-DRRCRKIT Log-Dog/Log-Rest Receiver Set $48.00

41270-MK2 Lap Siding & Shingle Making Package $547.00

LM34-41290 Saw Carriage Cover (Norwood Orange) $279.00

LM34-41290G Saw Carriage Cover (Norwood Green) $279.00

LM34-LS-94KIT Lumber Scale Magnets (9⁄4”, 6⁄4”, 5⁄4” & 9⁄8”) $39.00

LM34-LS-CMKIT Lumber Scale Magnets (5cm, 4cm & 2cm) $39.00

LM34-DSIND Quick-Click© Indexing Detent Setworks – Indicator System $19.00

LM34-DS34S Quick-Click© Indexing Detent Setworks – ¾” Detent Scale $24.00

LM34-DS64S Quick-Click© Indexing Detent Setworks – 6⁄4” Detent Scale $24.00

LM34-DS84S Quick-Click© Indexing Detent Setworks – 8⁄4” Detent Scale $24.00

LM34-DS25MMS Quick-Click© Indexing Detent Setworks – 1” (25mm) Detent Scale $24.00

CUSTOMIZEYOUR HD36 MILL!


Item No. Width Pitch Blade Quantity Dimensions PriceBLDS-ST114X167-78-10 1 ¼” 7/8” Sabretooth Box of 10 1 ¼” x 167” x 7/8” $265.00

BLDS-ST114X167-78-10-B 1 ¼” 7/8” Sabretooth Box of 5 1 ¼” x 167” x 7/8” $140.00

BLDS-ST114X167-34-10 1 ¼” ¾” Sabretooth Box of 10 1 ¼” x 167” x ¾” $265.00

BLDS-CB1378 1 3/8” 15/16” Bi-Metal Each 1 3/8” x 167” x 15/16” $89.00

Item No. Description Price41180 Norwood Standard Sharpener $795.00

41182 Norwood BladeMate Pro Sharpener $1197.00

41190 Norwood Tooth Setter $487.00

Item No. Description PriceLM34-HD-P1 Hydraulic Pump System (Integrated Power) $2995.00

LM34-HD-P4 Hydraulic Pump System (Auxillary Gas-Powered) $2995.00

LM34-HD-P2 Hydraulic Pump System (Manual) $457.00

LM34-HD-41400 Hydraulic Log Loaders $1797.00

LM34-HD-41285 Hydraulic Roller Toe Boards (Set of 2) $978.00

LM34-HD-41500 Hydraulic Log Turner $1267.00

LM34-HD-41600 Hydraulic Log Clamping System (2 Rests & 1 Dog) $2367.00

LM34-PSH-5000 Power Feed & Power Sawhead $2995.00

LM34-PSH-5030 Power Sawhead (Up/down only) $949.00

LM34-PSH-5010 Board Return $177.00

LUMBERPRO HD36 - Hydraulic & Power Optional Attachments

LUMBERPRO HD36 - Blades

LUMBERPRO HD36 - Blade Maintenance Equipment

Check out the catalog for more info! Pages 32-33

See Page 40-41 in the catalog

See Page 42-43 in the catalog

Item No. Description PriceHD36-41300 Spare Parts Kit (Drive & Idler belts (x1) &

Ceramics set (x1)$129.00

ENGP-KIT1623BS-INTG Engine Parts Kit (for 16hp and 23hp Briggs) $89.00

ENGA-DRN-BRIGGS Quick-Drain Oil Valve (for 16hp and 23hp Briggs)

$37.00

LUMBERPRO HD36 - Spare Parts Kits See Page 49 in the catalog

LUMBERPRO HD36

Power Feed& Power Sawhead


Item No. Description PriceML26-41150 Trailer/Support Leg Package (Set of 8) $1986.00

LM29-41170 Leveling Stands (Set of 10) (Additional 2 required for each 4-ft extension)

$185.00

ML26-41130 4-Foot Bed Extension $189.00

ML26-41400 Log Loading/Rolling & Ramp Package $897.00

ML26-41285B Roller Toe Boards – Manual (Set of 2) $767.00

41287 Board Offloading Rollers (Set of 4) $269.00

41295 Rapid-Dogging & Rolling System (Set of 2) $567.00

ML26-CD01 Cam Dog Kit (Set of 1) $46.00

41270-MK2 Lap Siding & Shingle Making Package $547.00

ML26-41290 Saw Carriage Cover (Norwood Orange) (for LM29 only) $265.00

ML26-41290G Saw Carriage Cover (Norwood Green) (for LM29 only) $265.00

MILL-BGCRK Dura-Guide Ceramic Blade Guide Retrofit Kit $299.00

MILL-WLKIT Auto-Blade Lube System $99.00

LM29 equipped with optional attachments.

LM29 AND MN26 - Optional Attachments & Accessories


Item No. Description PriceLM29-0014G LumberMate LM29 with 14hp (429cc)

Kohler OHV recoil start gas engine $5597.00 $4997.00

LM29-0013G LumberMate LM29 with 13hp (389cc) Honda GX OHV recoil start gas engine

$5597.00 $5197.00

LM29-0016G LumberMate LM29 with 16hp (479cc) Briggs & Stratton V-Twin OVH electric start engine

$6497.00 $5987.00

Item No. Description PriceMN26-0013G LumberMan MN26 with 13hp (420cc)

Briggs & Stratton recoil start gas engine $4697.00 $4397.00

LUMBERMAN MN26 - Engine Options

LUMBERMATE LM29 - Engine Options

For a limited time ONLY


Item No. Description Price41180 Norwood Standard

Sharpener$795.00

41182 Norwood BladeMate Pro Sharpener

$1197.00

41190 Norwood Tooth Setter $487.00

LM29 AND MN26 - Blade Maintenance Equipment

Check out the catalog for more info! Page 42-43Item No. Description PriceLM29-41300 Spare Parts Kit (Drive & Idler belts (x1) & 1¼” Blade-guide roller (x1)) $129.00ENGP-KIT913HON Engine Parts Kit (for 13hp Honda) $39.00ENGP-KIT13BS Engine Parts Kit (for 13hp Briggs) $39.00ENGP-KIT1623BS-INTG Engine Spare Parts Kit (Briggs 16hp & 23hp) $89.00ENGA-DRN-HONDA Quick-Drain Oil Valve (for 13hp Honda,

13hp Briggs and 14hp Kohler)$37.00

ENGA-DRN-BRIGGS Quick Drain Oil Valve (for 16hp Briggs) $37.00

LM29 AND MN26 - Spare Parts Kits Check out the catalog for more info! Page 49

Check out the catalog for more info! Page 36

LM29 AND MN26 - Blades

LX26 LOG MOULDER

Check out the catalog for more info! Page 40-41

LUMBERMAN MN26 & LUMBERMATE LM29

Item No. Width Pitch Blade Quantity Dimensions PriceBLDS-ST114X144-78-10 1 ¼” 7/8” Sabretooth Box of 10 1 ¼” x 144” x 7/8” $245.00

BLDS-ST114X144-78-10-B 1 ¼” 7/8” Sabretooth Box of 5 1 ¼” x 144” x 7/8” $130.00

BLDS-ST114X144-34-10 1 ¼” ¾” Sabretooth Box of 10 1 ¼” x 144” x ¾” $245.00

41475 1 3/8” 15/16” Bi-Metal Each 1 3/8” x 144” x 15/16” $89.00

Item No. Description PriceLX26-0013G Log Moulder LX26 with 13hp (420cc) Briggs OHV recoil-start engine (no log deck) $4786.00

LX26-0013G-LD1 Log Moulder LX26 with 13hp (420cc) Briggs engine + 16 ft. (4.8m) med-duty log deck $5786.00

LX26-0013G-LD2-HD Log Moulder LX26 with 13hp (420cc) Briggs engine + 16 ft. (4.8m) heavy-duty log deck $6996.00

LX26-CH8 Cutterhead Kit (8-inch) (Optional) $968.00

LX26-REST Cant Rest (Optional) $97.00

LX26-KN-P-0035 Knives - 210mm x 1.5” x 8mm planer knives (1 pair) $138.00

LX26-KN-TD-6X8 Knife Profile Package - 6” x 8” Traditional D (Knives - 3 pair) $646.00

LX26-KN-SC-6 Knife Profile Package - 6” Swedish Cope (Knives - 2 pair) $397.00

LX26-KN-SC-8 Knife Profile Package - 8” Swedish Cope (Knives - 2 pair) $526.00


Item No. Description PricePM01 PortaMill* $1187.00 $997.00PM02 Auxiliary Chain & Bar Oiler Kit $89.00

PM03 Track System (10ft/305cm) $276.00

PM04 Track System Extension (5ft/152cm) $148.00

PM14-BUNKKIT Cross Bunk Kit (includes supplementary bunk & log clamping set) $172.00

Item No. Description PricePM14-RC05X18 Ripping chain (.050” x 18” x 66 links) $47.00 PM14-RC05X20 Ripping chain (.050” x 20” x 72 links) $49.00

PM14-RC05X24 Ripping chain (.050” x 24” x 84 links) $59.00




Item No. Description Price

PM14-C120503 Chainsaw bar (C1-20-50-.375”)

$137.00 PM14-S120503 Chainsaw bar

(C1-20-50-.375”) $137.00

PM14-S1H1 Chainsaw bar adapter plate (S1 (12.10mm) to H1 (9.00 mm))

$14.00

PORTAMILL

RIPPING CHAIN CHAINSAW BARS


Check out the catalog for more info! Page 41

PortaMill equipped with optional oiler kit*Ladder + chainsaw not included.

PORTAMILL PM14

For a limited time ONLY

ONLY

$997!


Item No. Description Price41250-HD-SW Skid-Winch – Hydraulic Log Skidding Winch $1475.00

41250-MK2 SkidMate MK2 Log-Skidding Arch for ATVs $687.00

M-LH Log Hog Log-Skidding Attachment for Tractors $265.00

41280 Choker Chain with Probe $49.00

41380 Grapple 14 $119.00

41382 Grapple 20 $149.00

41380-MINI Mini-Grapple $89.00

41260 Timbertool Tree-Felling Jack $398.00

LOG FELLING & LOG SKIDDING EQUIPMENT

Only for Norwood Owners, this special-edition cap isn’t available to the general public.


Item No. Description Price41240 Log Wizard $269.0041340 Moisture Meter – 2-In-1 Wood/Building Pocket Moisture Meter $117.00BOOK-MGMTE Managing For Profit: Successful Sawmill Management $39.00978-0-9961369-0-7 The Ultimate Guide to Portable Sawmills $29.95

USEFUL TOOLS & RESOURCES Check out the catalog for more info! Page 48

Item No. Description PriceMS030 Cant Hook (30”) $97.00

PV042 Peavey (42”) $109.00

LC054 Log Carrier (54”) $147.00

41310 Lift Hook $32.00

LOG HANDLING TOOLS Check out the catalog for more info! Page 48

When you order your Norwood band sawmill today, we’ll also send you your

FREE Norwood “Owner’s Edition” hat

Log Wizard Moisture Meter

HydraulicSkid-Winch

LOG HANDLING TOOLS AND OTHER USEFUL RESOURCES

ONLY

$1475!


QUALITY-BUILT FOR THE LONG HAULWhen you invest in a Norwood, you can be sure it was quality-built right here at home in the U.S.A. and Canada. Every component of every Norwood sawmill is made of top-quality steel by highly-trained, highly-skilled operators with cutting-edge fabrication and machining technologies. You might hear other companies claim the same thing, but they only package their mills here out of inferior parts imported from China, Taiwan or Poland. Sawmills take a beating – They have to handle heavy logs, and cut accurate lumber in tough conditions.

When the chips are down, you want a mill that can stand up to the challenge. Don’t trust your milling operation to an offshore import made by low-paid, unskilled workers, no matter how cheap the price – If they can’t get the job done, they’re worthless. Norwood sawmills are built to cut hundreds of thousands, even millions, of board feet, day-in and day-out. Simply put, every Norwood is built for the long-haul.

LOW FREIGHT COSTSYour Norwood can be shipped right to your front door for a lot less than you think – usually just a few hundred dollars*. That’s because every Norwood mill is compactly packaged in kit-form on a single pallet – so you don’t pay to ship air! Second, Norwood’s high shipping volumes have earned us the industry’s biggest discounts on freight rates. Third, our carriers compete for each and every shipment, so you get the absolute lowest delivery rate possible.

When you call Norwood TOLL-FREE 1-800-567-0404 for your no-obligation sawmill quote, our on-staff shipping specialists will immediately launch a competition among our carriers to secure you the lowest freight price – it can be as little as a couple hundred dollars!

Want all the numbers? Once you call, you can have your complete sawmill quote, including shipping, in as little as an hour.

IN STOCK! GET STARTED TODAY Your Norwood sawmill is in stock and ready to ship!

We try to keep a large inventory of equipment which means we can usually ship your order off the loading dock in just 3 business days. Once your sawmill leaves the factory, it typically only takes three to ten business days to arrive to your door*.

TO GET YOUR NORWOOD ON THE ROAD

CALL TOLL-FREE 1-800-567-0404 from anywhere in the U.S.A. & Canada, Monday through Friday between 8:30 a.m. – 4:30 p.m. EST.

Or email [email protected] * Within the lower 48 states and in most provinces.

FREE CONSULTATIONSpeak with one of Norwood’s factory-trained specialists for a free consultation about your sawmilling and log harvesting needs. They can also get you a complete quote, including shipping right to your door.

CALL TOLL-FREE 1-800-567-0404 from anywhere in the U.S.A. & Canada, Monday through Friday between 8:30 a.m. – 4:30 p.m. EST.

SETTING UP YOUR MILLBuilding and setting up your mill isn’t rocket science – Most owners handle it in a weekend. And you’ve probably already got all the tools you need: Combination and allen wrenches, phillips screwdriver, ratchet wrench with set of sockets, grease gun, adjustable wrench.

If you can use these tools, you’ve got all that’s needed to assemble a Norwood. To help you put it together, we give you a fully illustrated manual that leads you, step-by-step, through the whole process. It’s packed with exploded diagrams, cutaways, photographs and checklists – all written in plain English. And we back it up with unlimited toll-free support – from the moment your Norwood arrives, through the first trial cuts, through to full production and beyond.

If you would like to receive your saw carriage pre-assembled, simply call TOLL-FREE at 1-800-567-0404. The main frame components will be assembled right at the factory and shipped direct to you on an oversized 4’ x 8’ pallet, with the log deck unassembled to keep shipment volume, and cost, to a minimum. Factory-assembly of entire mill also available.**** Departure from Norwood could require an additional one to three weeks. A nominal assembly charge will apply. Freight costs are higher to ship a partially or fully assembled mill due to increased volume. Where saw carriage ships pre-assembled, assembly of log deck and some final assembly of saw carriage components still required.

Ordering is Easy …

1. CHOOSE YOUR EQUIPMENT – Pick the mill that’s right for you, then accessorize it to meet your exact needs. 2. CHOOSE HOW YOU WANT TO RECEIVE IT – Shipped right to your door, or you can pick-up at a Norwood factory warehouse.3. CALL TOLL-FREE at 1-800-567-0404 for a quote and to place your order.

The LumberMate does everything Norwood said it would do. It went together perfectly and arrived in excellent condition.

– Scott Boydston, Hawaii


HOW TO RECEIVE YOUR ORDERShipment in the U.S.A. & Canada:In the U.S.A. and Canada, Norwood band sawmills and oversize orders ship by common-carrier freight truck directly to your residence or business so it’s important that your delivery address is easily accessible to a tractor-trailer. Shipped in knock-down form, we package oversize orders on a 4’ x 4’ (1.2m x 1.2m) and 4’ x 6’ (1.2m x 1.8m) pallets, and band and stretch-wrap your order for secure shipping. Most trucking companies require the driver to bring the shipment to the back of the truck. Because sawmill orders consist of individual pieces and boxes each weighing no more than 100 lbs., you can offload your order piece by piece and do not necessarily need special forklift equipment. If you cannot manage weights up to 100 lbs., you may want a helper to assist you to unload your order. You or your designated agent must be present to accept the order and off-load it. If no one is at the delivery address to accept the order, re-delivery and storage charges may apply. After your order has shipped, you may want to call the trucking company to confirm date of delivery; call us to obtain your carrier name and phone number, shipment tracking number and ship date.

Pick-Up in the U.S.A. & CanadaIf you would like to pick-up your sawmill or forestry equipment order direct from one of Norwood’s factory warehouses, please call us toll-free at 1-800-567-0404 three (3) business days in advance so that we can have your order ready. You will need a pick-up truck, full-size van or enclosed trailer to pick up your sawmill or oversized order.

Shipment Outside the U.S.A. & CanadaWe can ship Norwood sawmills anywhere in the world from Norwood’s factory warehouses in North America. Norwood sawmills are milling lumber in over 100 countries worldwide. Because Norwood dedicates experienced staff solely to processing international sawmill orders, shipments to international destinations are handled professionally, quickly and smoothly. If you’re outside North America, please feel free to contact Norwood at +1-705-325-0030 or [email protected] and we will arrange to ship your order to your nearest port.

Important: To ensure that you receive the best possible value, Norwood ships all equipment in knock-down form with step-by-step assembly instructions and detailed illustrations, exploded views and photos.

PAYMENT OPTIONS

Please note: Payment by credit card is only available within the U.S.A. or Canada. If payment is received by credit card, Norwood can only ship to the same cardholder’s address that the issuing bank has on file. Credit card transactions are processed through Norwood’s Canadian office; if you’re in the U.S., please verify with your issuing bank whether they will charge you a foreign exchange transaction fee. Payment by PayPal is only available within the U.S.A. or Canada. If payment is received by PayPal, Norwood must ship the order to your secure verified PayPal address; pick-up is not available when paying by PayPal. All orders are to be prepaid in full prior to shipping.

Important: All orders are shipped prepaid, which means that the shipping charges are paid at the time of your order. In all cases, before signing for the shipment (by signing the freight waybill or packing slip), please check your order carefully upon delivery to ensure that you receive all pieces & boxes listed on your packing slip and that they are in good order. Note missing or damaged pieces on the freight waybill before signing. Any claims not reported in writing on the freight waybill at the time of delivery become the sole responsibility of the purchaser; failure to report missing or damaged pieces & boxes in writing on the freight waybill at the time of delivery nullifies your insurance and precludes any subsequent claims.

Disclaimer: Specifications, designs, descriptions, illustrative material and prices on our website and in our literature are as accurate as known at the time of publication, but are subject to change without notice. Illustrations may include optional equipment and accessories and may not include all standard equipment. Our website and our literature have been compiled for worldwide circulation; while general information, pictures and descriptions are provided, some illustrations and text may include product features, options and accessories not available in all regions.

The color orange as it relates to sawmills, edgers, skidders & related equipment is a registered trademark owned by Norwood Industries Inc. (“Norwood”) in multiple jurisdictions. The trade-names Norwood®, LumberPro®, LumberMate®, LumberMan®, LumberLite®, PortaMill®, SkidMate®, BladeMate®, Sabretooth® & MultiMate® are registered trademarks owned by Norwood in multiple jurisdictions. Functional & design elements of Norwood sawmills and log handling equipment are protected by registered patents & pending patents in multiple jurisdictions.

We know that you will be 100% satisfied with the value and performance of your Norwood equipment. We back that up with a 30-day money-back guarantee. If your Norwood equipment doesn’t do everything we say, simply return it to us within 30 days and receive a refund (shipping not included).

We’re so convinced of the quality and durability of the Norwood LumberPro, LumberMate and LumberMan band sawmills that we will repair or replace, at our discretion, any part returned to us and found to be defective through manufacturing within the first two years of the original purchaser’s ownership (except consumable items such as belts, blades, hoses etc.). Norwood offers a one-year limited warranty on most other equipment. Engines are covered by a 2-year warranty directly with the engine manufacturer.

Form NWPL (E)07/17

HOW TO CONTACT US:Call TOLL FREE at

1-800-567-0404from anywhere in North America Monday to Friday between 8:30 a.m. – 4:30 p.m. EST.

Visit online atwww.NorwoodSawmills.comE-mail [email protected]

CANADA Factory WarehouseNorwood Industries Inc. 800-567-0404 2267 15/16 Side Road East Tel: 705-325-0030 Oro-Medonte, ON L0L 1T0

U.S.A. Factory WarehouseNorwood Sawmills USA Inc. 800-567-0404 730 Young Street, Suite 900 Tel: 705-325-0030 Tonawanda, NY 14150

Outside of North AmericaCall +1-705-325-0030 Monday through Friday between 8:30 a.m. – 4:30 p.m. EST. FOLLOW NORWOOD TO

GET THE LATEST NEWS.

2

STATISFACTION GUA

AR

NTEE

D100%

800-567-0404 | NorwoodSawmills.com

Documents

Transcript of 800-567-0404 | NorwoodSawmills.com