5(&200(1'(' - drawerslidesinc.comdrawerslidesinc.com/drawer-slides/wp-content/uploads/2014/06/I-DS...
15
Transcript of 5(&200(1'(' - drawerslidesinc.comdrawerslidesinc.com/drawer-slides/wp-content/uploads/2014/06/I-DS...
.203 THRU (3 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
5.88 6.25
7.00 7.75
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU
.203 X .375 SLOTTED THRU(3 PLCS)RIVET
10 SLIDE TRAVEL 10 SLIDE LENGTH
.25
1.25 3.50
7.13
.203 THRU
.240 THRU (3 PLCS)
6.50
8.75
.260 X .340 SLOTTED THRU(2 PLCS)
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-10-QDZINC PLATED
2250 SERIES10" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 (3 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
7.50 8.31
9.06 9.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU3 PLCS
RIVET
13 SLIDE TRAVEL 12 SLIDE LENGTH 2.09
.75
.25 1.25
3.50
9.13
.203 THRU .240 THRU (3 PLCS)
8.50
10.75
.260 X .340 SLOTTED THRU(2 PLCS)
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-12-QDZINC PLATED
2250 SERIES12" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (3 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25
3.75 9.25
10.31
11.06
11.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU3 PLCSRIVET
15 SLIDE TRAVEL 14 SLIDE LENGTH
.25
1.25 3.50
11.18
.203 THRU .240 THRU (3 PLCS)
10.50
12.81
.260 X .340 SLOTTED THRU(2 PLCS)
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-14-QDZINC PLATED
2250 SERIES14" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (3 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
11.25 12.25
13.00 13.75
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU4 PLCS
2.09
.75
.25
1.25
3.50
13.13
.203 THRU
.240 THRU (3 PLCS)
12.50
14.75
.260 X .340 SLOTTED THRU(2 PLCS)
17 SLIDE TRAVEL 16 SLIDE LENGTH
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PANHEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-16-QDZINC PLATED
2250 SERIES16" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (4 PLCS)
.410
.50 1.25
2.00 2.75
3.25 3.75
11.18 6.25
13.31 14.31
15.06 15.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU4 PLCSRIVET
.250
1.250 3.500
15.125
.203 THRU
.240 THRU (3 PLCS)
14.500
16.750
.260 X .340 SLOTTED THRU(2 PLCS)
19 SLIDE TRAVEL 18 SLIDE TRAVEL .75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-18-QDZINC PLATED
2250 SERIES18" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (4 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
6.25 12.41
15.31 16.31
17.06 17.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU4 PLCS
RIVET
21 SLIDE TRAVEL 20 SLIDE LENGTH
.25 1.25
3.50
17.13
.203 THRU
.240 THRU (3 PLCS)
16.50
18.75
.260 X .340 SLOTTED THRU(2 PLCS)
2.09
.75
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-20-QDZINC PLATED
2250 SERIES20" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (5PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
8.75 6.25
14.81 17.31
18.31 19.02
19.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU
.203 X .375 SLOTTED THRU (5 PLCS)RIVET
.25
1.25
3.50
19.13
.203 THRU
.240 THRU (3 PLCS)
18.50
20.75
.260 X .340 SLOTTED THRU (2 PLCS)
23 SLIDE TRAVEL 22 SLIDE LENGTH
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-22-QDZINC PLATED
2250 SERIES22" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 (5 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
8.75 6.25
16.78 19.25
21.00 20.25
21.75
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU5 PLCS
RIVET
.25
1.25
3.50
21.13
.203 THRU
.240 THRU (3 PLCS)
20.50
22.75
.260 X .340 SLOTTED THRU2 PLCS
25 SLIDE TRAVEL 24 SLIDE TRAVEL
2.09
.75
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-24-QDZINC PLATED
2250 SERIES24" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (5 PLCS)
.410 THRU
.50 1.25
2.00
2.75 3.25
3.75
8.75 6.25
15.56 18.75
22.25
21.25
23.00
23.75
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU5 PLCSRIVET
.25
1.25 3.50
23.13
.203 THRU .240 THRU (3 PLCS)
22.50
24.75
.260 X .340 SLOTTED THRU(2 PLCS)
27 SLIDE TRAVEL 26 SLIDE TRAVEL .75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 02/26/15
ASHEET 1 OF 1 KAS 02/26/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-26-QDZINC PLATED
2250 SERIES26" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (5 PLCS)
.410 THRU
.50 1.25
2.00 2.75
3.25 3.75
8.75 6.25
16.25 20.81
24.31 23.31
25.13 25.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU5 PLCS
RIVET
.25 1.25
3.50
25.13
.203 THRU .240 THRU (4 PLCS)
10.00 24.50
26.75
.260 X .340 SLOTTED THRU(2 PLCS)
29 SLIDE LENGTH 28 SLIDE LENGTH
2.09
.75
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 03/02/15
ASHEET 1 OF 1 KAS 03/02/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-28-QDZINC PLATED
2250 SERIES28" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU 5 PLCS
.410 THRU
.50 1.25 2.00
2.75 3.25
3.75
8.75 6.25
17.50 22.81
26.31 25.31
27.02 27.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU
.203 X .375 SLOTTED THRU(5 PLCS)RIVET
.25 1.25
3.50
27.13
.203 THRU
.240 THRU (4 PLCS)82 (FLAT HEAD SCREW)
12.00 26.50
28.75
.260 X .340 SLOTTED THRU82 (FLAT HEAD SCREW) (2 PLCS)
31 SLIDE TRAVEL 30 SLIDE LENGTH
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:1/4 HEX BOLT, #14 PAN HEAD WOOD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 03/02/15
ASHEET 1 OF 1 KAS 03/02/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-30-QDZINC PLATED
2250 SERIES30" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (5 PLCS)
.410 THRU
.50 1.25 2.00 2.75
3.25 3.75
8.75 6.25
15.75 24.84
28.34 27.34
29.06 29.85
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRU (5 PLCS)
RIVET
.25 1.25
3.50
29.13
.203 THRU
.240 THRU (6 PLCS)82 (FLAT HEAD SCREW)
22.00
9.50 16.75
28.50
30.75
.260 X .340 SLOTTED THRU 82 (FLAT HEAD SCREW)(2 PLCS)
33" SLIDE TRAVEL 32" SLIDE LENGTH
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 03/02/15
ASHEET 1 OF 1 KAS 03/02/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-32-QDZINC PLATED
2250 SERIES32" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (5 PLCS)
.410 THRU
.50 1.25 2.00 2.75
3.25 3.75
8.75 6.25
15.75 21.75
26.87
30.31 29.31
31.06 31.81
.180 X .210 SLOTTED HOLE
.203 X .453 SLOTTED HOLE.203 X .375 SLOTTED HOLE5 PLCS
RIVET
.25 1.25
3.50
31.14
.203 THRU
.240 THRU (6 PLCS)82 (FLAT HEAD SCREW)
24.00 16.75
9.50
30.50
32.75
.260 X .340 SLOTTED THRU (2 PLCS)82 (FLAT HEAD SCREW)
35" SLIDE TRAVEL 34" SLIDE LENGTH 2.09
.75
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 03/02/15
ASHEET 1 OF 1 KAS 03/02/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-34-QDZINC PLATED
2250 SERIES34" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
.203 THRU (7 PLCS)
.410 THRU
.50
1.25 2.00
2.75 3.25 3.75
8.75 6.25
15.75 20.62
28.81
32.37
31.37
33.06 33.81
.180 X .210 SLOTTED THRU
.203 X .453 SLOTTED THRU.203 X .375 SLOTTED THRURIVET
.25 1.25
3.50
33.12
.203 THRU
.240 THRU (5 PLCS)82 (FLAT HEAD SCREW)
26.00 16.75
9.50
32.50
34.75
.260 X .340 SLOTTED THRU(2 PLCS)82 (FLAT HEAD SCREW)
37" SLIDE TRAVEL 36" SLIDE LENGTH
.75
2.09
NOTES:1.) DO NOT SCALE DRAWING.2.) REMOVE ALL BURRS, NO SHARP EDGES.3.) MUST NOT HAVE SCRATCHES, DINGS, OR DENTS.4.) PART TO BE FREE FROM SURFACE IMPERFECTIONS OTHER THAN SURFACE FINISH REQUIREMENTS.5.) CRITICAL DIMENSIONS ARE INDICATED BY:6.) ALL ITEMS ARE TO BE INSPECTED TO 2.5 AQL SAMPLING PLAN UNLESS OTHER WISE STATED.7.) ENSURE PACKAGING WILL PROVIDE ADEQUATE PROTECTION DURING TRANSPORT.8.) GEOMETRIC FEATURES NOT DIMENSIONED ARE CONTROLLED BY 3D MODEL.
RECOMMENDEDINNER SLIDE MEMBER:#10 MACHINE OR WOOD PAN HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
OUTER SLIDE MEMBER:#10 MACHINE OR WOOD FLAT HEAD SCREW FOR ALL THRU HOLES AND SLOTTED THRU HOLES
REVISIONS
REV. DESCRIPTION DATE
A INITIAL RELEASE 03/02/15
ASHEET 1 OF 1 KAS 03/02/15
TOLERANCESUNLESS OTHERWISE SPECIFIED:
SCALE: NTS
REVPART No.ASIZE
DESCRIPTION:
NAME DATE
Q.A.
ENG.
SALES
FINISH:
MATERIAL:
.X = .05.XX = .01
.XXX = .008X/X = 1/32"
ANGLE = 1 SURFACE = THE INFORMATION CONTAINED IN THIS DRAWING IS THE SOLE PROPERTY OF RYADON INC. ANY REPRODUCTION
IN PART OR AS A WHOLE WITHOUT THE WRITTEN PERMISSION OF RYADON INC. IS PROHIBITED.
I-DS-2250-36-QDZINC PLATED
2250 SERIES36" SLIDE
STEEL
DEPT.
.125 DRAWN BY/DATE
FB 3/18/16
KS 3/18/16
AH 3/18/16
