Specialty Wood Drawer Boxes - Pullout Drawer Curved Drawer Boxes, Corner Cabinet Drawers

H6-1V14.2

(Phone) 1-800-237-1326 6:00AM - 4:30PM CST (24 Hour Fax) 1-608-781-3667 .com®® C

Specialty Drawer BoxesDrawer Boxes

Specialty Joinery

Full/Through Dovetail Joint - Style 100FT

French Dovetail JointStyle 100FR

• Available as an alternative to the Half Blind Dovetail Drawer Box (Style 100HB). ▪ Style 100FT (Full/Trough Dovetail Joint) available in Solid Wood only. ▪ Style 100FR (French Dovetail Joint) available in Solid Wood and Baltic Birch only. • Contact Customer Support for additional information.

Add the following up-charge to the square foot cost of Style 100HB (Half Blind Dovetail) Drawer Box Sidewall Material:• Style 100FT (Full/Through Dovetail Joint): Add charge per Sq.Ft.

• Style 100FR (French Dovetail Joint): Add charge per Sq.Ft.

Specialty Drawer Boxes

H6-2V14.2.com

®® 99.9% American MadeC

Drawer BoxesSpecialty Drawer Boxes

Shaped Side Patterns

DBSP100 DBSP200

DBSP300 DBSP400

Front

Front

Back

Back

Add: Charge per Drawer Box.

Customer specifies this dimension.

Customer specifies this dimension.

This dimension varies with the radius, which is based on the difference in the height from

the front to back.

H6-3V14.2



Notched Patterns

DBP101

Front

Back

DBP102RDBP102L

Front

Back

DBP103RDBP103L

Front

Back

DBP104L

Front

Back

DBP104R

Front

Back


H6-4V14.2.com



Curved Fronts

DBP201 DBP202 DBP203L DBP203R

DBP204L

DBP204R

** Only available in solid wood with Style 100HB (Half Blind Dovetail Joint). Not available RTA. **


H6-5V14.2



Inside Corner Patterns

Front

Front

LS101Min. Size:

12"W x 15"D x 1¾"H

Min SF: 1.25+ Design Charge

LS102Min. Size:

12"W x 20"D x 1¾"H


LS201Min. Size:

12"W x 20"D x 1¾"H


Price Calculation for Inside Corner Patterns:See “Inside Corner Pattern” Construction note 1) on next page, sidewall material options are dictated by means of construction.

1) a. Calculate the square footage of the Sidewall Material using the following formulas based on the pattern chosen: LS101 = ((DxH) x 2 + (WxH) x 3) ÷ 144 LS102 = ((DxH) x 2 + (WxH) x 4) ÷ 144 LS201 = ((DxH) x 2 + (WxH) x 5) ÷ 144 b. Multiply the square footage of the sidewall material by the square foot price for the wood species & grade chosen. Construction options and sidewall material pricing can be found on pages H1-6 - H1-8. There is a 1.25 square foot minimum for pricing on sidewall material.

2) a. Calculate the square footage of the Bottom Panel Material using this formula: (WxD) ÷144. b. Multiply the square footage of the bottom panel material by the square foot price. Pricing can be found on page H1-11. There is no square foot minimum for pricing the bottom panel material.

3) Add the charges from Step 1) and 2) together. 4) Add the Design Charge as noted above for the style chosen. 5) Add any other charges that apply (ie: Top Edge, Finishing, etc.)

H6-6V14.2.com



Specialty Drawer Box Notes - Shaped Side Patterns, Notched Patterns & Curved Fronts

1) Drawer Box - ShapedSide Patterns (DBSP)

The height must be specified for both the Front and Back of the drawer box. (1¾" minimum height at the narrowest.)Available with “scoop” and “ear” options.DBSP100 & DBSP200: Available with these Top Edge Options: TE1, TE2, TE3, TE4, TE5, TE6 and TE7.DBSP300 & DBSP400: Available with these Top Edge Options: TE1, TE2, TE3, TE4, TE6 and TE7.

2) Drawer Box - NotchedPatterns (DBP100’s)

DBP100 Series Patterns: On each of the drawings you will find the information that is required for ordering.Not available Ready To Assemble (RTA).Notching is available with all patterns.Available with these Top Edge Options: TE1, TE2, TE3, TE4, TE6 and TE7.“Scoop” and “ear” options are only available with the DBP101, DBP102L, DBP102R, DB-P103L and DBP103R.DBP103L/R & DPB104L/R: These patterns can not go below a 45 degree angle or exceed a 135 degree angle, for dovetailing purposes.

3) Drawer Box - Curved Fronts (DBP200’s)

The radius must be specified at either the face or back of the curve, when ordering.If a matching drawer front is being ordered with one of these designs, the radius for the drawer box will be determined from the radius of the drawer front.DBP201, DBP203L/R: Due to the radius of these styles, the front may be thicker than the remaining sides, see cross-section view on page H6-4.

Specialty Drawer Box Notes - Inside Corner Patterns1) Construction Comprised of either Dovetail, Dowel or Nailed construction, along with butt joints.2) Domino Tenon Joinery The joinery method used when ordering Inside Corner Drawer Boxes in Melamine.3) RTA Not available.4) Inside Corner Angle Only available with a 45 degree angle.

5) “Scoop” and “Ear” Options Not available.

6) Top Edge Options All options are available.7) Minimum Height Minimum height of Inside Corner Drawer Boxes is 1¾".

Specialty Wood Drawer Boxes - Pullout Drawer Curved Drawer Boxes, Corner Cabinet Drawers

Documents

Transcript of Specialty Wood Drawer Boxes - Pullout Drawer Curved Drawer Boxes, Corner Cabinet Drawers