SDR11CLASS : SDR11

TEMPERATURE LIMIT:CFLANGE CLASS:150 lbPRESSURE LIMIT:psiCORROSION:0 mmDESIGN PRESSURE:160 psi @ 23 CMATERIAL:HDPE CLASS 150 ASTM D3350(SDR11)SERVICE:Todos

TAGSIZE RANGEDESCRIPTIONREFERENCENOTES

VALVES 3 - 12CHECK 250 PSI WWP DI DUAL PLATE UL/FM3 - 6BUTTERFLY 250 PSI WWP, LUG, DI, EPDM, HNDL OP. 3 - 12GATE 250# FF DI NRS W/POST INDICATOR

PIPE 3 - 24PIPE HDPE CLASS 150 ASTM D3350 PE3408 (SDR11) FITTING 3 - 6ELL 90 DEG HDPE CLASS 150 MOLDED PE34083 - 6ELL 45 DEG HDPE CLASS 150 MOLDED PE34083 - 6TEE HDPE CLASS 150 MOLDED PE34083 - 10CAP HDPE CLASS 150 MOLDED PE34083 - 6REDUCER CONC HDPE CLASS 150 MOLDED PE34083 - 6REDUCER ECC HDPE CLASS 150 MOLDED PE34088 - 24ELL 90 DEG HDPE CLASS 150 5 SEGMENTS FAB PE34088 - 24ELL 45 DEG HDPE CLASS 150 3 SEGMENTS FAB PE34083 - 24ELL 60 DEG HDPE CLASS 150 3 SEGMENTS FAB PE34083 - 24ELL 30 DEG HDPE CLASS 150 2 SEGMENTS FAB PE34083 - 24ELL 22.5 DEG HDPE CLASS 150 2 SEGMENTS FAB PE34088 - 24TEE HDPE CLASS 150 FAB PE34088 - 24TEE RED HDPE CLASS 150 FAB PE34088 - 24REDUCER CONC HDPE CLASS 150 FAB PE34088 - 24LATERAL 45 DEG HDPE CLASS 150 FAB PE3408

FLANGES 3 - 24FLG ADAPTER HDPE CLASS 150 SDR 11 MOLDED PE34083 - 24STUB END HDPE CLASS 150 SDR 11 MOLDED PE34083 - 24FLG BACK UP RING 150# DI A536-84 SDR 11, EPOXY COATED, ANSI B16.53 - 24FLG BLIND 150# HDPE PE 3408

GASKET 3 - 24GASKET 150# RF NON-ASB NBR 1/8" THKGARLOCK 30003 - 24GASKET 150# FF NON-ASB NBR 1/8" THKGARLOCK 3000

BOLTING 1/4 - 1 1/2STUD-BOLT A193 GR B7 W/(02) A194 GR 2H NUTS & (02) WASHER F-4361/4 - 1 1/2MACHINE BOLT A307 GR B UNC

&K00+000..