4colour Temp Strainer Custom scinko.com.sg/image/data/CATALOG/Sure Flow/Temporary... · 2015. 10....

TEMPORARY STRAINERS

CUSTOM SCREENS

TEMPORARY STRAINERS

CUSTOM SCREENSAND

Toll Free: 1-800-263-8251 Toll Free Fax: 1-800-876-1164International 1-905-335-1350 International Fax: 1-905-332-4993Email: [email protected] www.sureflowequipment.com

Page

2

The Universe of Industrial Valves from Sure Flow

PumpConnectors

Knife GateValves

Check Valves

DuplexStrainers

Basket Strainers

ButterflyValves

Y-Strainers/Custom Screens

KnifeGate

Valves

Strainers SanitaryStrainers

ElasticSwingCheckValves

BallValves

Fabricated Sanitary DualBasket Strainers

Temporary Strainers and Custom Screens

Temporary Cone and Basket Strainers .... 4, 5Vertical Basket Strainers .............................. 6Tee Type Strainers....................................... 7Custom Strainers (order form) ..................... 8Metal & Mesh Selection ............................... 9Technical Information ................................. 10Warranty..................................................... 10

Index Pages

This catalog describes Sure Flow's extensiveline of cone, basket and tee strainers.

Sure Flow will manufacture special strainers ofall types, sizes and materials to customer'sspecifications.

Sure Flow Equipment Inc., for many years, hasprovided industry with custom ENGINEEREDSTRAINERS to many design codes. All productsare designed and manufactured in accordancewith the requirements of ASME SECTION VIII,DIV 1.

U stamp and UM Stamp now available!

Sure Flow’s initial focus was to supply themarketplace with an extensive line of Y-TypeStrainers, Simplex Strainers, Duplex andFabricated Strainers. The product line provides asolution to every filtration problem in everyindustry and if we haven’t already solved yourproblem, our Engineers will develop the bestanswer.

In addition to Pipeline Strainers, Sure Flow offersWafer Double Door Check Valves, Silent CheckValves, Butterfly Valves 2” to 48”, Knife GateValves and Expansion Joints and AutomaticStrainers.

Sure Flow products are available in Cast Iron,Steel, Stainless, Bronze, and any exotic Alloy, insizes from 1/4” to 60”, 125 lb. to 2500 lb. Class,in NPT, Flanged, Butt Weld and Socket Weld.

Many design codes are available.


Page

3

Strainer ApplicationsWaterThe most popular application. From waste and water treatment, boiler feed pumps,condensate service, irrigation and general and intermediate water service.

Steel MillsCooling water for furnaces, rolling mills, lubricating oil, fuel oil, etc.

PetrochemicalRefining crude oil to gasoline. Protection of pumps, meters, etc.

UtilitiesProtection for heat exchangers, pumps, and condensers, strain coolingwater, screen transformer oil, etc.

Chemical PlantsSeparation of solid impurities from liquids. Protection of process equipment.

Pulp and PaperAn industry which utilizes extensive filtration of water, coatings and pigments.

MarineGeneral filtration of seawater in cooling, sanitary, and general cleaning of lines.Fuel, hydraulic fluid, lubricating systems, etc.

Process EquipmentProtection of vital equipment such as flow meters, spray nozzles, heat exchangers,condensers, pumps, etc.

Other industrial applications include food processing, paint, cement, ink, pharmaceutical, cosmetics,tank car and trucks, ceramics and many more.

Strainer Applications

If it flows, a strainer should be there!

The pipeline strainers in this catalog have a wide range of industrial and marine applications. In addition to oiland water service, the strainers detailed in this catalog are suitable for removing impurities from gasoline,chemicals, paint, food process and many other process fluids.

A strainer is an inexpensive "insurance" for protecting valuable pumps such as meter pumps, for example.There is often unwanted matter present which can cause serious problems. Dirt, foreign matter, or evenclumps of product itself, can clog or damage critical and expensive equipment. Another factor to consider isthe cost of downtime. STRAINERS are the solution.


Page

4

PlateType

Temporary Cone Strainer, Stainless Steel for 4" 150# Servicewith 1/8" Perf. screen, (Standard), 150% Open Area

Temporary Cone and Basket StrainersFeaturesSure Flow Temporary Strainers are used for start-up of new or revamped piping systems. They will preventconstruction debris from causing damage to downstream equipment. The screen cone is tig welded aroundthe entire circumference of the flange ring to provide strength and prevent unwanted bypass.

Size: Range in sizes from 1/4" to 60" nominal pipe size asstandard.

Open Area: Range in open area of strainer to cross sectionarea of the pipe from 100% to 300% as standard

Material Thickness: Gauge of strainer material rangesbetween 22 to 11 depending on hole size.

Perforation: Perforation hole sizes range from 1/16" to 1/4"as standard (For standards - Page 9)

Type of Material: Materials include carbon steel,various grades of stainless steel and alloys.

Flange/Facings: Strainer support rings can be con-structed to accommodate raised face flanges, ring typejoint flanges or any other standard flange facing.

Welding: Resistance welding, TIG and Oxyacetylene.

Liners/Covers: Available for small particle removal200 thru 10 mesh carbon steel; stainless steel, etc.(See Page 9)

Straight Flow - mesh on inside

Reverse Flow - mesh on outsideExample: Include full description

Model Type & Length *Screen# Material Opening

0400 - CS150SS - M - 125S = Standard M = 150% L = 200%

Manufacturer reserves the right to modify dimensions, materials,or design. Contact factory for certification.

BasketType

ConicalType

Reverse Flow

Straight Flow

Reverse Flow

Straight Flow

Notes

Ordering Information

When Ordering Specify:1. Pipe size2. Pressure rating/flange rating3. Perforation or mesh size4. Material5. Style - cone, basket, etc.6. Direction of flow - straight or reverse7. Percentage of open area or length.


Page

5

3/4 1 1/2 2 3 41 1 1/2 2 3 4

1 1/2 2 2 1/2 3 1/2 52 2 1/2 3 4 6

2 1/2 2 1/2 3 4 1/2 63 3 4 1/2 6 84 4 5 7 115 4 1/2 7 9 146 5 1/2 8 11 178 7 11 14 2110 8 13 17 2612 10 15 20 3114 10 16 22 3316 12 19 24 3718 14 21 27 4120 26 24 31 4824 18 28 37 5730 22 34 46 7136 27 42 58 85

Dimensional Data

Temporary Cone and Basket Strainers

FLANGE DIMENSIONSNominal OD

Pipe Size 150/300# ASA 300# ASA 600# ASA 900# ASA 1500#ASA3/4 5/8 2 1/8 2 1/2 2 1/2 2 5/8 2 5/81 3/4 2 1/2 2 3/4 2 3/4 3 3

1 1/2 1 1/4 3 1/4 3 5/8 3 5/8 3 3/4 3 3/42 1 3/4 4 4 1/4 4 1/4 5 1/2 5 1/2

2 1/2 2 1/4 4 3/4 5 5 6 3/8 6 3/83 2 3/4 5 1/4 5 3/4 5 3/4 6 1/2 6 3/44 3 3/4 6 3/4 7 7 1/2 8 8 1/85 4 5/8 7 5/8 8 1/4 9 3/8 9 5/8 9 7/86 5 1/2 8 5/8 9 3/4 10 3/8 11 1/4 118 7 3/8 10 7/8 12 12 1/2 14 13 3/4

10 9 3/8 13 1/4 14 1/8 15 5/8 17 1712 11 16 16 1/2 17 7/8 19 1/2 20 3/814 12 1/4 17 3/8 18 7/8 19 20 3/8 22 5/816 14 20 1/8 21 21 7/8 22 1/2 ....

18 15 3/4 21 1/4 23 1/4 23 3/4 25 ....

20 17 1/2 23 1/2 25 1/2 26 5/8 .... ....

24 21 1/4 27 7/8 30 1/4 30 7/8 .... ....

ID

CONE STRAINER Length = L

3/4 3 4 5 61 3 4 5 6

1 1/2 3 1/2 4 1/2 6 62 4 6 8 11

2 1/2 4 6 8 113 5 7 9 134 8 10 12 185 8 11 14 226 9 13 18 258 12 17 23 33

10 14 21 28 4112 16 25 34 4914 18 27 36 5316 21 31 40 6118 24 35 46 6820 26 38 51 7624 31 45 61 9030 38 57 76 11436 46 68 91 130

Nominal 100% 150% 200% 300%Pipe C-1 C-1.5 C-2 C-3Size

BASKET STRAINER Length = LNominal 100% 150% 200% 300%

Pipe B-1 B-1.5 B-2 B-3Size


Page

6

Standard Vertical Basket StrainersDesigned to minimize pressure drop by maintaining a minimum of 1.15 ratio ofannulus outlet area as compared to outlet nozzle cross section area.

When Ordering, Specify:1. Flow rate2. Specific Gravity3. Perforation (For standards, page 9)4. Flange rating and pipe size5. Type of closure6. Basket area ratio7. Type of material8. Desired maximum pressure drop in

service

Special Note:We recommend Dimension “B” to beused for basket removal clearance.

Contact factory for dimensional drawings.

b

A

D

C2

CC2

FLOW


Page

7

150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 1500 150 300 600 900 15002 21/2 10 101/2 111/4 131/2 131/2 153/4 61/8 67/8 81/2 81/2 5 51/4 55/8 91/4 91/4 103/4 113/8 121/2 151/4 151/4

21/2 3 111/2 12 121/2 143/4 143/4 65/8 7 73/4 91/4 91/4 53/4 6 63/8 103/8 103/8 123/8 13 137/8 165/8 165/83 33/8 121/4 13 133/4 151/4 161/2 71/16 75/8 83/8 93/8 103/8 61/8 61/2 67/8 11 115/8 133/16 141/8 151/4 17 185/84 41/8 141/4 15 163/4 173/4 181/2 81/16 83/4 101/8 107/8 115/8 71/8 71/2 83/8 13 133/8 153/16 161/4 181/2 19 207/85 47/8 163/4 171/2 191/4 201/4 221/2 95/16 101/8 115/8 123/8 143/8 83/8 83/4 95/8 15 161/8 1711/16 187/8 211/4 221/2 255/86 55/8 183/4 19 21 223/4 251/4 101/8 1015/16 125/8 1313/16 161/8 91/8 91/2 101/2 17 181/4 191/4 207/16 231/8 253/16 283/48 7 22 223/4 25 271/4 311/4 121/8 13 1415/16 163/8 191/2 11 113/8 121/2 205/8 225/8 231/8 243/8 277/16 30 351/810 81/2 25 261/4 291/2 32 1311/16 15 171/2 19 121/2 131/8 143/4 241/2 263/16 283/8 321/4 3512 10 29 301/4 323/4 361/4 153/4 171/8 191/4 211/2 141/2 151/8 163/8 281/8 301/4 321/4 355/8 395/814 11 32 331/4 351/2 173/8 183/4 123/4 16 165/8 173/4 333/8 353/8 381/216 12 34 351/2 381/2 187/16 20 221/2 17 173/4 191/4 357/16 373/4 413/418 131/2 38 391/2 42 209/16 221/8 241/2 19 193/4 21 399/16 417/8 451/220 15 413/8 423/4 451/2 223/8 237/8 261/2 2011/16 213/8 223/4 431/16 451/4 491/424 17 46 471/4 501/2 247/8 263/8 291/2 23 235/8 251/4 477/8 50 503/4

Tee Type StrainersConstructionThe Sure Flow Tee Strainer is a custom fabricated compact strainer. Designed to remove foreign pipeline particlesfrom pipelines. This provides the ultimate protection for pumps, valves, and other related equipment. The SureFlow Tee Strainer is fabricated to your specification.

The standard Sure Flow Tee Strainer is constructed of carbon or stainless steel material. Sure Flow has fabricatednumerous assemblies of chrome moly. Optional materials, end connections and accessories are available.

Size: 1” - 24” (larger on request)End Connections: Flanged, butt weldBody Material: Cast steel, stainless steelPressure Rating: 150 psig, 300 psig, 600 psigClosure: BoltedBasket: 304 Stainless Steel

Standard Features Optional Features• Quick opening cover• 900 and 1500 pressure

ratings• Variety of basket materials• Special perf & mesh down

to 5 micron

• Mounting legs• Special linings• Exotic materials ie.

Titanium & Zirconium• Pressure gauge taps• Drain taps and vents

Tee Type Strainer Bodies

Tee Straight Flow Type Tee Angle Flow Type Tee Angle Flow Modified “TAM”

Tee Type Strainer Inserts

When Ordering, Specify:1. Type - straight flow, angle flow, angle modified.2. Nominal pipe size.3. Flange rating and facing.4. Pressure rating and facing.

5. Corrosion conditions, if any (type of material).6. Perforation (particle retention).

Flanges and bodies are designed to meet Section 1 of AmericanStandard Code for Pressure Piping, ASA B31.1.

PipeSize A

B C D E

A

A

B

C

AD

A A

EC

A A

EC

AD


Page

8

Custom Strainer Screens

We manufacture Strainer Baskets, Screens, Tubes,Cones and Tee Strainers in Stainless Steel, Monel,Titanium and other exotic metals. Sure FlowEquipment Inc. can customize baskets to fit yourspecial needs.

Please send us your prints, samples or simply giveus your requirements/specs in attached chart andlet us design the strainer for you.

Custom product not subject to return credit orrefund.

When Ordering Specify:1. Pipe size

2. Pressure rating/flange rating

3. Perforation or mesh size

4. Material

5. Style – cone, basket, etc.

6. Direction of flow – straight or reverse

7. Percentage of open area or length

C Dia

Length

Dia

Cone Type Basket Strainer

B Dia.

Length

Dia

Cone Type Strainer

D Dia

Length

Cylindrical Screen

E Dia

Length

Dia

Basket Strainer

F Ring

Perf.Length

Dia

Perf.Length

Basket Strainer

Dia


Page

9

Meshes/Lineal InchUS and ASTM Actual OpeningStd. Sieve No. Inches Microns

10 .075 190512 .060 152414 .051 129516 .045 114318 .039 99120 .034 86424 .028 71130 .020 50835 .018 45740 .015 38150 .011 27960 .009 22970 .008 20380 .007 178100 .006 152120 .0046 117

Perforated Metal and Mesh

Meshes/Lineal InchUS and ASTM Actual OpeningStd. Sieve No. Inches Microns

130 .0043 109140 .0042 107150 .0041 104160 .0038 97170 .0035 89180 .0033 84200 .0029 74250 .0024 61300 .0018 46400 .0015 38

120 x 400 .0016 4080 x 700 .0012 30200 x 600 .0010 25165 x 1400 .0007 17200 x 1400 .0004 10325 x 2300 .0002 5

Mesh - Inch - Micron Conversion Chart

AVAILABLE IN ALL MATERIALS


Page

10

All products are warranted to be free of defects in material and workmanship for a period of one year from thedate of shipment, subject to below. All custom products are not subject to return, credit or refund.

If the purchaser believes a product to be defective, the purchaser shall:

(a) Notify the manufacturer, state the alleged defect and request permission to return the product. Merchandisewill not be accepted for return without a “Return Code” clearly marked on the outside of the package.Contact the office to obtain a return code.

(b) If permission is given, return the product with the transportation prepaid. Collect shipments will not beaccepted. Goods must be returned prepaid.

If the product is accepted for return and found to be defective, the manufacturer will, at its discretion, eitherrepair or replace the product, f.o.b. factory, within 60 days of receipt, or issue credit for the purchase price.

Other than to repair, replace or credit as described above, purchaser agrees that manufacturer shall not be liablefor any loss, costs, expenses or damages of any kind arising out of the product, its use, installation orreplacement, labeling, instructions, information or technical data of any kind, description of product or use,sample or model, warnings or lack of any of the foregoing.

NO OTHER WARRANTIES, WRITTEN OR ORAL, EXPRESS OR IMPLIED, INCLUDING THE WARRANTIESOF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY, ARE MADE OR AUTHORIZED.NO AFFIRMATION OF ACT, PROMISE, DESCRIPTION OF PRODUCT OR USE OR SAMPLE OR MODELSHALL CREATE ANY WARRANTY FROM MANUFACTURER, UNLESS SIGNED BY THE PRESIDENT OFMANUFACTURER.

Sure Flow Equipment Inc. – Limited Warranty

Basket Strainer (PSI) – Pressure Drop

BasedonCleanWater

Flow in GPM (x 1,000)

Str

ain

er P

ress

ure

Dro

p P

SI

10.0

9.0

8.0

7.0

6.0

5.0

4.0

3.0

2.0

1.0

1.0 2.0 3.0 4.0 5.0 6.0 7.0 8.0 9.0 10.0

(4"

150

lb.)

(6"

150

lb.)

(8"

150

lb.)

(10"

150

lb.)

(12"

150

lb.)

(14"

150

lb.)


Page

11

Notes

U.S.A.: P.O. Box 321, Tonawanda, New York 14151-03211-800-263-8251 • Toll Free Fax 1-800-876-1164

Canada: 3179 Mainway Drive, Burlington, ON L7M 1A6Tel: 905-335-1350 • Fax: 905-332-4993

Email: [email protected] Site: www.sureflowequipment.comDecember 2002

4colour Temp Strainer Custom scinko.com.sg/image/data/CATALOG/Sure Flow/Temporary... · 2015. 10....

Documents

Transcript of 4colour Temp Strainer Custom scinko.com.sg/image/data/CATALOG/Sure Flow/Temporary... · 2015. 10....