· 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for...

17
46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes System-specific pressing tongs / pressing rings for all common press fitting systems. Driven by all ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and suitable drive units of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) for manual driving by the ROLLER’S Easy-Press drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer. Choose your own pressing tongs / pressing rings! Just select the desired pressfitting system and pressing tongs size / pressing ring size in the table on pages 47 – 62. Please note that pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Adaptor tongs, see page 62, are necessary for driving the ROLLER’S pressing rings (PR). Precisely worked and exactly rounded, system-specific press contour according to the respective pressfitting system for perfectly system- conformant, reliable pressing. Drop-forged, for maximum quality demands. Specially hardened function parts for long life. Confirmations of suitability see page 38. SHK liability acceptance agreements see page 39. Traceability according to EN 1775:2007. ROLLER’S pressing tongs / pressing rings with press contour M, V, SA, B, RN and UP have worked a specific marking in the press contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process. With this traceability ROLLER fulfils the recommendation of the European standard EN 1775:2007 for the installation of pressfitting systems for gas. German Top Quality Patent EP 1 223 008 Patent US 6,739,172 Example: ROLLER’S pressing tongs M: Impression “M” on pressed fitting for traceability according to EN 1775:2007 B ACz HE F G H HA KI K M MT RFz RN SA TH U UP US V VX VAU VUS VIC VP VRX

Transcript of  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for...

Page 1:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

46

Pip

e p

res

sin

g t

ec

hn

olo

gy ROLLER’S pressing tongs

ROLLER’S pressing ringsAccessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

System-specific pressing tongs / pressing rings for all common press fitting systems.

• Driven by all ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and suitable drive units of other makes. All pressing tongs marked by a * have another connection (Patent EP 1 223 008, Patent US 6,739,172) for manual driving by the ROLLER’S Easy-Press drive unit. Read and follow the installation and assembly instructions of the system provider/manufacturer. Choose your own pressing tongs / pressing rings! Just select the desired pressfitting system and pressing tongs size / pressing ring size in the table on pages 47 – 62. Please note that pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Adaptor tongs, see page 62, are necessary for driving the ROLLER’S pressing rings (PR).

• Precisely worked and exactly rounded, system-specific press contour according to the respective pressfitting system for perfectly system-conformant, reliable pressing.

• Drop-forged, for maximum quality demands.

• Specially hardened function parts for long life.

• Confirmations of suitability see page 38.

• SHK liability acceptance agreements see page 39.

Traceability according to EN 1775:2007.

• ROLLER’S pressing tongs / pressing rings with press contour M, V, SA, B, RN and UP have worked a specific marking in the press contour which leaves a lasting impression on the pressed fitting after the pressing process. This enables the user to check again whether the most suitable pressing tongs or the suitable pressing ring have been used to make the pressfit connection even after the pressing process.

• With this traceability ROLLER fulfils the recommendation of the European standard EN 1775:2007 for the installation of pressfitting systems for gas.

German Top Quality

Patent EP 1 223 008 Patent US 6,739,172

Example: ROLLER’S pressing tongs M: Impression “M” on pressed fitting for traceability according to EN 1775:2007

B

ACz

HE

F

G

H

HA

KI

K

M

MT

RFz

RN

SA

TH

U

UP

US

V

VX

VAU

VUS

VIC

VP

VRX

Page 2:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

47

Pip

e p

res

sin

g te

ch

no

log

yAC-FIX PRESS H 12* 570300(Global Piping H 16* 570320Systems) H 20* 570350

H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785VX 16* 571635VX 20* 571640

AC-FIX H 16* 570320PRESS-MULTI H 18* 570340(Global Piping H 20* 570350Systems) H 25* 570360

H 32 570380RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

ACOME MT ACz 12* 572642ACz 16* 572644ACz 20* 572646ACz 25 572648

AHLSELL M 12 570100A-press M 15 570110elförzinkad M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AHLSELL V 12 570107A-press koppar V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

AHLSELL M 15 570110A-press rostfritt M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AIRBEL M 12 570100PRESSCLIM M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

AIRBEL M 12 570100SERTINOX M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

ALB TH 16* 570460Sistema Multicapa TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (S) 572365

APE Raccordi TH 16* 570460a pressare TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

ASTM F 1807 US ⅜"* 571450(Fittings with US ½"* 571455Copper Crimp US ¾"* 571460Ring for PEX US 1"* 571465tubing) US 1 ¼" 571470

US 1 ½" 571475US 2 ” 571477

Bampi BALPEX TH 14* 570455(serie MP) TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Bampi BALPEX TH 16* 570460Gas TH 20* 570470

TH 26* 570475BEGETUBE/ B 14* 570845IVAR B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880F 50 570745F 63 (S) 572385F 75 (PR-3B)3) 572830

BRASELI RFz 16* 571325Pressfitting PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340

BRASELI U 16* 570765Pressfitting U 18* 570770Multicapa U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795

Brass Form H 16* 570320Press Form H 18* 570340Pex H 20* 570350

TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775

Brass Form H 16* 570320Press Form H 18* 570340Pex-Al-Pex H 20* 570350

TH 16* 570460TH 18* 570465TH 20* 570470U 16* 570765U 18* 570770U 20* 570775

Brass & Fittings RFz 16* 571325Pressman ACz 20* 572646Multicapa RFz 25 571335

RFz 32 571340Brass & Fittings RFz 16* 571325Retipress ACz 20* 572646

RFz 25 571335RFz 32 571340

BRASSTECH H 16* 570320MULTItermoSAN H 18* 570340Brasspress H 20* 570350

H 26* 570370TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 18* 570770U 20* 570775

BROEN M 15 570110BALLOFIX PRES M 18 570120

M 22 570130V 15 570115V 18 570125V 22 570135

Business Key M 15 570110MT-PRESS M 18 570120(inox) M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Cello Products VUS ½" 571770>B< Press VUS ¾" 571775

VUS 1" 571780VUS 1¼" 571785VUS 1½" 571790VUS 2" 571795

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 3:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

48

Pip

e p

res

sin

g t

ec

hn

olo

gy ROLLER’S pressing tongs / pressing rings

CIMBERIO SpA SA 15 570935Cim 220 SA 18 570940

SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

CIMBERIO SpA VUS ½" 571770Cim 220.1 VUS ¾" 571775

VUS 1" 571780VUS 1¼" 571785VUS 1½" 571790VUS 2" 571795

CIMBERIO SpA SA 15 570935Cim 220G SA 18 570940

SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

CIMBERIO SpA SA 15 570935Cim 1220M SA 22 570945

SA 28 570950SA 35 570955M 15 570110M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

CIMBERIO SpA SA 15 570935Cim 1220V SA 22 570945

SA 28 570950SA 35 570955V 15 570115V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Climatek TH 14* 570455Clima Therm TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480H 40 A (4G) 570695

ClouSet Press TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475

Comap V 12 570107Sudopress Cu V 14 570112Visu-Control V 15 570115

V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap V 12 570107Sudopress V 14 570112Cu Visu-Control V 15 570115Gas V 16 570117

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap V 12 570107Sudopress Cu V 14 570112Visu-Control V 15 570115Solar V 16 570117

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Comap RFz 12* 571320PEXPress RFz 16* 571325

RFz 20* 571330RFz 25 571335

Comap TH 16* 570460SKINPress TH 18* 570465Visu-Control Gas TH 20* 570470

TH 26* 570475THL 32 570487

Comap TH 14* 570455SKINPress TH 16* 570460Visu-Control TH 18* 570465

TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

COMISA TH 14* 570455Press System TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

COMISA TH 16* 570460Press System Gas TH 20* 570470

TH 26* 570475TH 32 570480

CONEL F 16* 570715CONNECT F 20* 570725MULTI F 26* 570730

F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

Danfoss SpeedUp U 16* 570765FH Composite AL U 20* 570775Danfoss Basic U 16* 570765FH Composite AL U 20* 570775

DIWAflex systems TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

DUOFIL U 16* 570765MKSYSTEM U 18* 570770

U 20* 570775U 25* 570780U 32 570785

DW Verbundrohr U 16* 570765multitubo systems U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

EBRILLE U 16* 570765Isomonflex U 18* 570770

U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785

EBRILLE U 14* 570760Monflex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780H 26* 570370TH 26* 570475U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

egeda Comisa TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

egeda Baronio V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Elkhart VUS ½" 571770APOLLOXPRESS VUS ¾" 571775Fittings Copper VUS 1" 571780and Low-Lead VUS 1¼" 571785Brass VUS 1½" 571790

VUS 2" 571795Elkhart VUSF 2½" (PR-3B)3) 572819APOLLOXPRESS VUSF 3" (PR-3B)3) 572820LD-C Fittings VUSF 4" (PR-3B)3) 572821CopperEMMETI B 16* 570850GERPEX- B 20* 570860FIVPRESS B 26 570870

B 32 570880F 16* 570715F 20* 570725H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 4:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

49

Pip

e p

res

sin

g te

ch

no

log

yEMPUR TH 14* 570455

TH 15* 570457TH 16* 570460TH 17* 570462TH 20* 570470TH 25* 570495

EURACCORDI M 15 570110SYCPRESS M 18 570120STAINLESS M 22 570130STEEL PRESS M 28 570140FITTINGS M 35 570150

M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

EURACCORDI M 15 570110SYCPRESS M 18 570120CARBON STEEL M 22 570130PRESS FITTINGS M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

EUROTUBI M 12 570100Europa C-STAHL M 15 570110PRESSFITTING M 18 570120SISTEM1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

EUROTUBI M 15 570110Europa INOX M 18 570120PRESSFITTING M 22 570130SISTEM1) M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FAR Rubinetterie TH 14* 570455PRESSFAR TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

F.B.Q. BARONIO V 12 570107BQ press V 14 570112

V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

F.B.Q. BARONIO V 15 570115BQ press V 18 570125carbon steel V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

F.B.Q. BARONIO V 15 570115BQ press gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

FELSINEA TECH TH 14* 570455Felsineapress TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Fercofloor RFz 16* 571325DUO Press RFz 20* 571330FERCO PEX RFz 25 571335

RFz 32 571340Fercofloor RFz 16* 571325DUO Press RFz 20* 571330MULTIFER RFz 25 571335

RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

FILTUBE FTB 15 571432Filpress FTB 18 571434

FTB 22 571436FTB 28 571438FTB 35 571440M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Carbon Steel M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Copper M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

FILTUBE M 15 570110Instalpress M 18 570120Inox M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Fittings Estándar RFz 16* 571325ECO-PRESS RFz 20* 571330

RFz 25 571335RFz 32 571340

Fittings Estándar RFz 16* 571325MULTICAPA RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785

Fittings Estándar RFz 16* 571325PE-X RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

FOHS TH 16* 570460HEIZTECHNIK TH 20* 570470FOHSPRESS TH 26* 570475

TH 32 570480FORNARA B 16* 570850ForPress B 20* 570860

B 26 570870B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 5:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

50

Pip

e p

res

sin

g t

ec

hn

olo

gy

FRABO V 12 570107FRABOPRESS V 15 570115RAME (Cu) V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 12 570107FRABOPRESS V 15 570115RAME (Cu) V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 12 570107FRABOPRESS V 15 570115INOX 316 V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 15 570115FRABOPRESS V 18 570125C-STEEL V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

FRABO V 15 570115FRABOPRESS V 18 570125C-STEEL GAS V 22 570135

V 28 570145V 35 570155

FRABO TH 16* 570460FRABOPRESS TH 20* 570470MULTI-BRASS TH 26* 570475(MB) TH 32 570480

U 16* 570765U 20* 570775

FRABO H 16* 570320FRABOPRESS H 20* 570350MULTI-PLUS U 16* 570765(MP) U 20* 570775FRABO V 15 570115SOLARPRESS V 18 570125

V 22 570135V 28 570145

Fränkische B 16* 570850alpex-duo B 18* 570855

B 20* 570860B 26 570870B 32 570880F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480

Fränkische F 16* 570715alpex F50 PROFI F 20* 570725

F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

Fränkische F 202) 570725alpex-gas2) F 262) 570730

F 322) 570735

Fränkische F 40 570742alpex L F 50 570745

F 63 (S) 572385F 75 (PR-3B)3) 572830

gabotherm H+S TH 10* 570467TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GAROS TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Geberit Mapress M 12 570100C-STAHL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 12 570100EDELSTAHL M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 15 570110EDELSTAHL Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Geberit Mapress M 12 570100KUPFER M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Geberit Mapress M 15 570110KUPFER Gas M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Geberit Mepla G 16* 570400G 20* 570410G 26* 570420G 32 570430G 40 570440G 50 570450G 63 (S) 572470

General Fittings TH 16* 570460Serie 5G00 Trident TH 20* 570470

TH 26* 570475TH 32 570480H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785

General Fittings TH 16* 570460Serie 5S00 TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 50 (S) 572400H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 32 570785U 40 570790U 50 570795B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

Giacomini H 16* 570320Raccordi RM H 20* 570350Giacomini H 26* 570370

H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475THL 32 570487U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S) 572365

Giacomini V 15 570115Valvole Giacomini V 18 570125serie R850V V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150

Ginde Press U 16* 570765Fitting for Ginde U 20* 570775Multi-layer Pipe U 25* 570780System U 32 570785Global Plastic TH 16* 570460Rothapress TH 18* 570465

TH 20* 570470TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GLOBAL U 16* 570765TRADE U 20* 570775aqualpress U 25* 570780system U 32 570785

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 6:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

51

Pip

e p

res

sin

g te

ch

no

log

yGolan Pipe U 16* 570765Systems U 20* 570775(Scandinavia) U 25* 570780Alu-Pres U 32 570785

U 40 570790U 50 570795U 63 (S) 572365

GS TH 14* 570455Wärmesysteme TH 16* 570460System TH TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

GS V 15 570115Wärmesysteme V 18 570125System V V 22 570135

V 28 570145V 35 570155

GSP Group TH 16* 570460USMetrix TH 20* 570470HAGOS TH 16* 570460HakaGerodur TH 10* 570467HakaGerodur- TH 11,6* 570482System TH 12* 570452

TH 14* 570455TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495

HakaGerodur TH 16* 570460HAKASAN TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Harden 2000 TH 14* 570455Poly-Pex 2000 TH 16* 570460

TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Harden 2000 TH 16* 570460Poly-Pex Gas TH 20* 570470

TH 26* 570475THL 32 570487

Harden 2000 TH 14* 570455Plastic-Press TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475

HASTINIK M 15 570110Hastinik/Hitpress M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

heima-press TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

HELIROMA U 16* 570765Klimapress U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

HELIROMA RFz 16* 571325romapress RFz 20* 571330

RFz 25 571335RFz 32 571340

Henco TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902

Henco Gas TH 16* 570460TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902

herotec TH 14* 570455Tempuss-press TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

herotec H 16* 570320Tempuss-press H 20* 570350Plus H 25* 570360

H 32 570380MT 20* 571744MT 25* 571746MT 32 571748RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

Herz pipefix TH 10* 570467TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

HITEC Sistema TH 14* 570455Multistrato TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400

Hydro-Air US ⅜"* 571450Systems US ½"* 571455Hydro-Plumb US ¾"* 571460Plus PEX US 1"* 571465

US 1 ¼" 571470Hydro-Air U 16* (½") 570765Systems U 20* (⅝") 570775Hydro-Flex U 25* (¾") 570780PEX-AL-PEX U 32 (1") 570785IBP >B< Flex U 16* 570765

U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

IBP >B< Press V 12 570107V 14 570112V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 12 570107Carbon V 14 570112

V 15 570115V 16 570117V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 15 570115Gas V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 7:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

52

Pip

e p

res

sin

g t

ec

hn

olo

gy

IBP >B< Press V 15 570115Inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

IBP >B< Press V 15 570115Solar V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Idrosanitaria TH 16* 570460Bonomi TH 20* 570470Homegas TH 26* 570475Idrosanitaria TH 16* 570460Bonomi TH 18* 570465Idropress TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IDROSISTEMI TH 16* 570460Ta-Press TH 20* 570470

TH 26* 570475TH 32 570480F 16* 570715F 20* 570725F 26* 570730F 32 570735F 50 570745H 16* 570320H 20* 570350H 26* 570370H 32 570380U 16* 570765U 20* 570775U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

IPA IPANA-Press TH 10* 570467TH 11,6* 570482TH 12* 570452TH 14* 570455TH 15* 570457TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 22* 570472TH 25* 570495TH 26* 570475TH 28 570477TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

IPALPEX TH 14* 570455(Industrie du TH 16* 570460Plastique et TH 18* 570465Accessoires) TH 20* 570470

TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

IPLEX K16/P18* 572600PIPELINES PF 22* 571980AUSTRALIAIplex Pro-fit

IPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K1 K32 572615(Gas) K1/40 572620

K1/50 572625IPLEX K16/P18* 572600PIPELINES K/20* 572605AUSTRALIA K/25* 572610Iplex K2ISOLTUBEX RFz 16* 571325ISOLPEX RFz 20* 571330

RFIz 25 571337RFIz 32 571342

ISOLTUBEX RFz 16* 571325Multicapa RFz 20* 571330

RFIz 25 571337RFIz 32 571342U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

ISOTUBI M 15 570110NUMEPRESS M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

IVAR B 20* 570860ALPEX-GAS B 26 570870

B 32 570880IVAR B 14* 570845Ivar-Press B 16* 570850

B 18* 570855B 20* 570860B 26 570870B 32 570880F 50 570745F 63 (S) 572385

IVAR TH 16* 570460MULTI PRESS TH 20* 570470GAS TH 26* 570475

TH 32 570480IVAR TH 16* 570460Multi Press MP TH 18* 570465

TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400F 16* 570715F 18* 570720F 20* 570725F 26* 570730F 32 570735F 50 570745F 63 (S) 572385H 16* 570320H 18* 570340H 20* 570350H 25* 570360H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 18* 570770U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790U 50 570795B 16* 570850B 18* 570855B 20* 570860B 26 570870B 32 570880

IVAR TH 16* 570460Plastic Multi Press TH 20* 570470PMP TH 25* 570495

TH 26* 570475TH 32 570480F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380U 16* 570765U 20* 570775U 25* 570780C 26* 570750U 32 570785B 16* 570850B 20* 570860B 26 570870B 32 570880

Jäger H 14* 570310aquapress H H 16* 570320

H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795U 63 (S) 572365

Jäger M 15 570110Niropress Typ M M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Jaraflex- TH 14* 570455Presssystem TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

KAN U 16* 570765KAN-therm U 20* 570775

U 25* 570780C 26* 570750U 32 570785U 40 570790TH 50 (S) 572400TH 63 (S) 572405

KAN U 14* 570760KAN-therm LBP U 16* 570765

U 20* 570775U 25* 570780C 26* 570750U 32 570785U 40 570790TH 14* 570455TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

KAN M 15 570110KAN-therm M 181) 570120Inox M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KAN M 15 570110KAN-therm M 181) 570120Steel M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 8:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

53

Pip

e p

res

sin

g te

ch

no

log

yKE KELIT U 16* 570765KELIT KELOX U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 75 (PR-3B)3) 572828

KE KELIT M 15 570110steelFIX M 18 570120C-Stahl M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KE KELIT M 15 570110steelFIX M 18 570120Edelstahl M 22 570130

M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

KEMBLA VAU 15 (OD 12,7 mm) 572687KemPress Gas VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

KISAN KI 16* 571360Kisan KD KI 20* 571370

KI 25* 571375TH 16* 570460TH 20* 570470TH 25* 570495

KISAN KI 16* 571360Kisan WL KI 20* 571370

KI 25* 571375KI 32 571380TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480

KISAN KI 16* 571360Kisan WM KI 20* 571370

KI 25* 571375KI 32 571380

KISAN U 20* 570775Kisan WR U 25* 570780

U 32 570785U 40 570790U 50 570795

KISAN M 15 570110Kistal C M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KISAN M 15 570110Kistal Inox M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

KME Q-tec TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475

Largo- TH 12* 570452Presssystem TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

LECHAR TH 16* 570460ALCOBRAPEX TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485

LECHAR U 16* 570765COBRAPEX U 20* 570775

U 25* 570780U 32 570785

LEGEND-PRESS VUS ½" 571770press fitting VUS ¾" 571775system VUS 1" 571780

VUS 1¼" 571785VUS 1½" 571790VUS 2" 571795

LK Systems V 12 570107LK >B<Press V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems V 12 570107LK >B<Press V 15 570115Elförzinkat V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems V 15 570115LK >B<Press V 18 570125Gas V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

LK Systems TH 16* 570460LK Universal TH 20* 570470

TH 25* 570495TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

LVI-DAHL U 16* 570765Altech-Alupex U 20* 570775

U 25* 570780U 32 570785

Mair Heiztechnik M 12 570100Gomafix Cu/E M 15 570110

M 181) 570120M 22 570130M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526

Mair Heiztechnik H 11,5* 570315Gomafix M H 14* 570310

H 16* 570320H 20* 570350

Mair Heiztechnik H 11,5* 570315M-Press H 14* 570310

H 16* 570320H 20* 570350H 26* 570370H 32 570380U 40 570790

Ma.s.ter System TH 14* 570455PRESSMASTER TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

MAXITUB RFz 12* 571320MAXIPRESS RFz 16* 571325

RFz 20* 571330RFz 25 571335RFz 32 571340

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 9:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

54

Pip

e p

res

sin

g t

ec

hn

olo

gy

MAXITUB TH 14* 570455METALPEX TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480

MEGARO H 11,5* 570315HAKAPRESS H 14* 570310

H 16* 570320H 17* 570330H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790F 50 570745F 63 (S) 572385

MEGARO B 16* 570850MEGAPRESS B 20* 570860

B 26 570870B 32 570880F 40 570742F 50 570745F 63 (S) 572385

MEGARO B 16* 570850MEGAPRESS MP B 20* 570860

B 26 570870B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735F 40 570742F 50 570745F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

MEGARO B 16* 570850MEGAPRESS B 20* 570860MPL B 26 570870

B 32 570880F 16* 570715F 20* 570725F 26* 570730F 32 570735F 40 570742F 50 570745F 63 (S) 572385H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775U 32 570785

METALGRUP RFz 16* 571325PexGrup RFz 20* 571330

RFz 25 571335RFz 32 571340

METALGRUP U 16* 570765MultiGrup U 18* 570770

U 20* 570775U 25* 570780U 32 570785

MULTITHERM TH 16* 570460PRESSSYSTEM TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

Multicapas U 16* 570765Industrial U 18* 570770multitubo systems MT 20* 571744MC MT 25* 571746

MT 32 571748U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

Multicapas U 16* 570765Industrial MT 20* 571744multitubo systems MT 25* 571746MM MT 32 571748

TH 16* 570460TH 20* 570470TH 25* 570495TH 26* 570475TH 32 570480RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340H 16* 570320H 20* 570350H 25* 570360H 26* 570370H 32 570380

NEUTHERM H 16* 570320MEKUPRESS-HT H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390U 40 570790

NIBCO (POL) H 16* 570320NEXT-Heat H 20* 570350

H 25* 570360H 32 570380TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

NIBCO (USA) VUS ½" 571770Press System VUS ¾" 571775Copper VUS 1" 571780

VUS 1¼" 571785VUS 1½" 571790VUS 2" 571795

Nicoll Fluxo TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

Nicoll Fluxo Gas TH 16* 570460TH 20* 570470TH 26* 570475

NIROTEC M 15 570110PRESSFITTING M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170

N.T.M. TH 14* 570455WINNY-AL TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365

NUPIGECO U 14* 570760Multinupi U 16* 570765

U 18* 570770U 20* 570775C 26* 570750U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Nussbaum V 12 570107Cupress V 15 570115

V 18 570125V 22 570135V 28 570145V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510

Nussbaum VP 16* 570910Optiflex Press VP 20* 570915

VP 25* 570920VP 32 570925

Nussbaum V 15 570115Optipress V 18 570125Aquaplus V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815VF 76,1 (PR-3B)3) 572816VF 88,9 (PR-3B)3) 572817VF 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Nussbaum V 15 570115Optipress-Gaz V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815VF 76,1 (PR-3B)3) 572816VF 88,9 (PR-3B)3) 572817VF 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Nussbaum V 15 570115Optipress-Therm V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 572815VF 76,1 (PR-3B)3) 572816VF 88,9 (PR-3B)3) 572817VF 108,0 (PR-3B)3) 572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

O.M.T. H 16* 570320Heizungssystem H 20* 570350

H 26* 570370H 32 570380H 40 (4G) 570390

Oteraccordi M 12 570100Oter Tecno1) M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 10:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

55

Pip

e p

res

sin

g te

ch

no

log

yOteraccordi M 12 570100Oter Tecno M 15 570110carbonio1) M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Oventrop Cofit P H 16 A* 570620H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A 570690U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

PB TUB RFz 12* 571320SERTIPRESS RFz 16* 571325

RFz 20* 571330RFz 25 571335

Pegler Yorkshire M 15 570110XPress Carbon M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 12 570100XPress Copper M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 15 570110XPress Copper M 181) 570120Gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire TH 14* 570455Henco Multilayer TH 16* 570460Solutions TH 18* 570465

TH 20* 570470TH 26* 570475HE 32 571900HE 40 571902

Pegler Yorkshire M 15 570110XPress Solar M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Pegler Yorkshire M 15 570110XPress M 181) 570120Stainless M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PERFEXIM U 16* 570765"PERFEKT U 20* 570775SYSTEM" U 25* 570780

U 32 570785PERFILTUBO U 16* 570765PERFILALUPEX U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

PERFILTUBO M 15 570110PERFILPRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PEXTUBE RFz 16* 571325PexTube RFz 20* 571330

RFIz 25 571337RFIz 32 571342

PIPELIFE M 15 570110C-PRESS M 18 570120

M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

PIPELIFE- TH 16* 570460RADOPRESS TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

PLASTICA ALFA H 16* 570320Multypex H 20* 570350

H 26* 570370H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypexalfa Gas H 20* 570350

H 26* 570370PLASTICA ALFA H 16* 570320Multypexalfa Gas H 20* 570350protek H 26* 570370PLASTICA ALFA H 16* 570320Multypex H 20* 570350Air H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Plus H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Thermo H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLASTICA ALFA H 16* 570320Multypex H 20* 570350Thermo Plus H 26* 570370

H 32 570380U 16* 570765U 20* 570775C 26* 570750U 32 570785

PLÁSTICOS RFz 16* 571325FERRO RFz 20* 571330FERROPLAST RFz 25 571335Pressfitting PE-X RFz 32 571340

PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyAIR RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS TH 16* 570460plomyPRESS TH 20* 570470plomyGAS TH 25* 570495

TH 32 570480PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyLAYER RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyLAYER PEX RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPERT EVAL RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPEX RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

PLOMYPLAS RFz 16* 571325plomyPRESS RFz 20* 571330plomyPEX EVAL RFz 25 571335

RFz 32 571340TH 16* 570460TH 20* 570470TH 25* 570495TH 32 570480U 16* 570765U 20* 570775U 25* 570780U 32 570785

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 11:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

56

Pip

e p

res

sin

g t

ec

hn

olo

gy

PLUMBING PLUS VAU 15 (OD 12,7 mm) 572687PRESS PLUS VAU 20 (OD 19,1 mm) 572689(AUS) VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697VAUF 65 (PR-3B)3) 572839 (OD 63,5 mm)

VAUF 80 (PR-3B)3) 572840 (OD 76,2 mm)

VAUF 100 (PR-3B)3) 572841 (OD 101,6 mm)

POLYPIPE F 16* 570715POLYPRESS F 20* 570725

F 26* 570730F 32 570735F 40 570742F 50 570745F 63 (S) 572385F 75 (PR-3B)3) 572830

POLYPIPE TH 10* 570467POLYSURE TH 15* 570457

TH 22* 570472TH 28 570477

POLYSAN TH 14* 570455Handelsges. TH 16* 570460m.b.H. & Co KG TH 17* 570462(Krems/Öster- TH 18* 570465reich) POLYSAN- TH 20* 570470Press-System TH 26* 570475

TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

POLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706C-Stahl-Press- M 54 (PR-3S)3) 572708SystemPOLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706Edelstahl- M 54 (PR-3S)3) 572708Press-SystemPOLYSAN M 15 570110Handelsges. M 18 570120m.b.H. & Co KG M 22 570130(Krems/Öster- M 28 570140reich) POLYSAN- M 35 570150EUROTUBI M 42 (PR-3S)3) 572706Edelstahl-Press M 54 (PR-3S)3) 572708System GasPOLYSAN U 16* 570765(España) U 18* 570770Rainbow U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Prandelli H 14* 570310Multyrama Pf H 16* 570320

H 18* 570340H 20* 570350H 26* 570370H 32 570380U 40 570790U 50 570795

Prandelli H 16* 570320Multyrama Pfm H 18* 570340

H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 18* 570770U 20* 570775

PRASKI TH 10* 570467BAVARIA-press TH 14* 570455

TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Raccorderie M 15 570110Metalliche M 18 570120inoxPRES1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Raccorderie M 15 570110Metalliche M 18 570120steelPRES1) M 22 570130

M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

RBM Tita-gas TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

RBM Tita-fix B 14* 570845B 16* 570850B 18* 570855B 20* 570860B 26 570870F 16* 570715F 18* 570720F 20* 570725H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 18* 570770U 20* 570775

remo H 14* 570310H 16* 570320H 18* 570340H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390

RIFENG U U 14* 570760PRESS FITTING U 16* 570765(F5) U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365U 63 (PR-3B)3) 572837U 75 (PR-3B)3) 572828

RIFENG TH TH 16* 570460PRESS FITTING TH 20* 570470(F9) TH 25* 570495

TH 26* 570475TH 32 570480

RIQUIER RFz 12* 571320A SERTIR RFz 16* 571325

RFz 20* 571330RFz 25 571335

Rofix Climatrix H 16* 570320Rhinopex H 20* 570350

U 16* 570765U 20* 570775TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480

Roth RN 14* 572672RN 17* 572674RN 20* 572676RN 25/26 572678RN 32 572680RN 40 (PR-3S)3) 572714RN 50 (PR-3S)3) 572716RN 63 (PR-3B)3) 572836

Roth Nordic RN 16 572670Alu-LaserPlus/ RN 20 572676PressCheck2) RN 25/26 572678(DNK-NOR-SWE-FIN) RN 32 572680

RN 40 (PR-3S)3) 572714RN 50 (PR-3S)3) 572716

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO INOX M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Rubinetterie M 15 570110Bresciane M 18 570120Bonomi M 22 570130TURBO STEEL M 28 570140

M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Rubinetterie TH 14* 570455Bresciane TH 16* 570460Bonomi TH 18* 570465TURBO PRESS TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Rubinetterie TH 16* 570460Bresciane TH 20* 570470Bonomi TH 26* 570475TURBO PRESS TH 32 570480GASSa.MI plastic TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Sa.MI plastic TH 16* 570460Multistrato Gas TH 20* 570470

TH 26* 570475TH 32 570480

SANHA TH 14* 5704553fit-Press TH 16* 570460Serie 25000 TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 14* 570760U 16* 570765U 20* 570775

SANHA-Press SA 12 570930Chrom SA 15 570935Serie 16000 SA 18 570940

SA 22 570945SA 28 570950M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 12:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

57

Pip

e p

res

sin

g te

ch

no

log

ySANHA-NiroSan- SA 15 570935

Presssystem SA 18 570940

Serie 9000 SA 22 570945

SA 28 570950

SA 35 570955

SA 42 (PR-3S)3) 572710

SA 54 (PR-3S)3) 572712

M 15 570110

M 18 570120

M 22 570130

M 28 570140

M 35 570150

M 42 (PR-3S)3) 572706

M 54 (PR-3S)3) 572708

M 15 45° (PR-2B)3) 574522

M 18 45° (PR-2B)3) 574524

M 22 45° (PR-2B)3) 574526

M 28 45° (PR-2B)3) 574528

M 35 45° (PR-2B)3) 574530

V 15 570115

V 18 570125

V 22 570135

V 28 570145

V 35 570155

V 42 570165

V 54 570175

V 15 45° (PR-2B)3) 574504

V 18 45° (PR-2B)3) 574506

V 22 45° (PR-2B)3) 574508

V 28 45° (PR-2B)3) 574510

V 35 45° (PR-2B)3) 574512

SANHA-NiroSan- SA 15 570935

Presssystem Gas SA 18 570940

Serie 17000 SA 22 570945

SA 28 570950

SA 35 570955

SA 42 (PR-3S)3) 572710

SA 54 (PR-3S)3) 572712

M 15 570110

M 18 570120

M 22 570130

M 28 570140

M 35 570150

M 42 (PR-3S)3) 572706

M 54 (PR-3S)3) 572708

M 15 45° (PR-2B)3) 574522

M 18 45° (PR-2B)3) 574524

M 22 45° (PR-2B)3) 574526

M 28 45° (PR-2B)3) 574528

M 35 45° (PR-2B)3) 574530

V 15 570115

V 18 570125

V 22 570135

V 28 570145

V 35 570155

V 42 570165

V 54 570175

V 15 45° (PR-2B)3) 574504

V 18 45° (PR-2B)3) 574506

V 22 45° (PR-2B)3) 574508

V 28 45° (PR-2B)3) 574510

V 35 45° (PR-2B)3) 574512

SANHA-NiroSan- SA 15 570935Presssystem SA 18 570940Serie 19000 SA 22 570945(silicone free) SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA- SA 12 570930Pressfittings SA 14 570932Serie 6000/ SA 15 570935Serie 8000 SA 16 570937

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA- SA 12 570930Pressfittings Gas SA 14 570932Serie 10000/ SA 15 570935Serie 11000 SA 16 570937

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 14 570112VG 14 570132V 15 570115V 16 570117VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA- SA 12 570930Pressfittings SA 15 570935Solar SA 18 570940Serie 12000/ SA 22 570945Serie 13000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 13:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

58

Pip

e p

res

sin

g t

ec

hn

olo

gy

SANHA- SA 12 570930Pressfittings SA 15 570935Air SA 18 570940Serie 14000/ SA 22 570945Serie 15000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA- SA 15 570935Pressfittings SA 18 570940Industrie SA 22 570945Serie 18000 SA 28 570950

SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA SA 15 570935PURAPRESS SA 18 570940Serie 80000 SA 22 570945

SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 151) 570110M 181) 570120M 221) 570130M 281) 570140M 351) 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SANHA-Therm SA 12 570930Serie 24000 SA 15 570935

SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712M 12 570100M 15 570110M 18 570120M 22 570130M 28 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

SATEC SK VITerm TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480U 40 570790U 50 570795U 63 (S) 572365

Schlösser TH 16* 570460EUROPRESS- TH 20* 570470SYSTEM TH 26* 570475

TH 32 570480SCHÜTZ EHT TH 14* 570455rOpress TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

Schwer Fittings M 12 570100AQUApress M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170

Seppelfricke TH 16* 570460HENCO PRESS TH 20* 570470

TH 26* 570475HE 32 571900HE 40 571902

Seppelfricke V 12 570107Sudopress V 15 570115Edelstahl V 18 570125Visu-Control V 22 570135

V 28 570145V 35 570155V 42 570165V 54 570175

Seppelfricke V 12 570107Sudopress Kupfer V 15 570115Visu-Control V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175

Seppelfricke V 15 570115Sudopress Kupfer V 18 570125Visu-Control V 22 570135Gas V 28 570145

V 35 570155V 42 570165V 54 570175

Seppelfricke V 15 570115Sudopress Kupfer V 18 570125Visu-Control V 22 570135SolarSeppelfricke TH 14* 570455Sudopress SKIN TH 16* 570460Visu-control TH 18* 570465

TH 20* 570470TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

Seppelfricke M 12 570100XPress C-Stahl M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 15 570110XPress M 181) 570120Edelstahl M 22 570130

M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 12 570100XPress Kupfer M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Seppelfricke M 15 570110XPress Kupfer M 181) 570120gas M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

SESTA TH 14* 570455SESTA GAS TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480

SESTA H 16* 570320Sistema H 20* 570350multistrato TH 14* 570455

TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405U 16* 570765U 20* 570775

SIKO TYPRO TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475

SIKO TH 14* 570455TYROTHERM TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475

SLOVARM U 16* 570765PEX-THERM U 20* 570775

H 26* 570370U 32 570785H 16* 570320H 20* 570350H 26* 570370H 32 570380

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 14:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

59

Pip

e p

res

sin

g te

ch

no

log

yP

ipe

pre

ss

ing

tec

hn

olo

gy

Standard U 16* 570765Hidráulica U 18* 570770MultiStandard U 20* 570775

U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (S) 572365

STELBI TH 14* 570455POLIKRAFT TH 16* 570460

TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

SURE HISPANIA RFz 16* 571325SURE-PRESS RFz 20* 571330

RFIz 25 571337RFIz 32 571342U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365

Systerm H 16 A* 570620WELCO-Gas H 20 A* 570650

H 26 A* 570670H 32 A 570680

Systerm H 14 A* 570610WELCO-Flex H 16 A* 570620

H 17 A* 570630H 20 A* 570650H 26 A* 570670H 32 A 570680H 40 A (4G) 570695

Systerm H 16 A* 570620WELCO-Teck H 20 A* 570650

H 26 A* 570670TERMICALINE B 16* 570850Termipex B 20* 570860

B 26 570870B 32 570880H 16* 570320H 20* 570350TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

TermoConcept Basic E015) 571855TC-PRESSTHERMOLUTZ H 14* 570310acular/rapid H 16* 570320

H 17* 570330TE-SA TH 14* 570455TE-SA press TH 16* 570460serie 800 TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

THISA RFz 16* 571325Thisa multiplus RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790

THISA RFz 16* 571325Thisa Pex RFz 20* 571330

RFz 25 571335RFz 32 571340U 16* 570765U 20* 570775U 25* 570780U 32 570785

TIEMME TH 14* 570455COBRAPRESS TH 16* 570460

TH 18* 570465TH 20* 570470TH 25* 570495TH 26* 570475THL 32 570487TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

TIEMME RFz 16* 571325Serie 1700 PE-X RFz 20* 571330a pressare RFz 25 571335

RFz 32 571340TIEMME TH 16* 570460TIEMME Gas TH 20* 570470

TH 26* 570475THL 32 570487

TKM TH 14* 570455Systemtechnik TH 16* 570460

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

TRA U 16* 570765MULTITRAPRESS U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

TRA TRAPRESS H 12* 570300H 16* 570320H 20* 570350H 25* 570360H 32 570380RFz 12* 571320RFz 16* 571325RFz 20* 571330RFz 25 571335RFz 32 571340

Tréfimétaux Qtec TH 14* 570455TH 16* 570460TH 20* 570470

TWEETOP U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

UNICAL AG U 16* 570765MAX MULTIPEX U 20* 570775

H 26* 570370U 32 570785

UNIDELTA TH 16* 570460DeltAll TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405H 16* 570320H 20* 570350H 26* 570370H 32 570380H 40 (4G) 570390U 16* 570765U 20* 570775U 32 570785U 40 570790U 50 570795U 63 (S) 572365

Uponor Unipipe U 14* 570760U 16* 570765U 18* 570770U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC UP 14* 572630UP 16* 572632UP 18* 572634UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC-D UP 16* 572632UP 20* 572636UP 25 572638UP 32 572640U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Uponor MLC-G2) UP 202) 572636UP 25 572638UP 32 572640

Valsir PEXAL H 14* 570310H 16* 570320H 20* 570350H 26* 570370H 32 V 570685

Valsir PEXAL Gas H 14* 570310H 16* 570320H 20* 570350H 26* 570370

Van Marcke Log. TH 16* 570460Tu-Bi-Pex TH 17* 570462

TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405TH 75 (PR-3B)3) 572829

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 15:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

60

Pip

e p

res

sin

g t

ec

hn

olo

gy

Van Marcke Log. M 12 570100Tu-Bi-Press M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

Variotherm TH 11,6* 570482System TH TH 16* 570460Viega Pexfit Fosta VX 16* 571635

VX 20* 571640VX 25* 571645

Viega Pexfit VX 16* 571635Fosta G VX 20* 571640

VX 25* 571645Viega Pexfit Plus VX 12* 571630

VX 16* 571635VX 20* 571640

Viega Pexfit VX 16* 571635Pro Fosta VX 20* 571640

VX 25* 571645Viega Pexfit VX 16* 571635Pro Plus VX 20* 571640Viega Prestabo V 12 570107

V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815VF 76,1 (PR-3B)3) 6) 572816VF 88,9 (PR-3B)3) 6) 572817VF 108,0 (PR-3B)3) 6)572818V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega Profipress V 12 570107VG 14 570132V 15 570115VG 16 570137V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815VF 76,1 (PR-3B)3) 6) 572816VF 88,9 (PR-3B)3) 6) 572817VF 108,0 (PR-3B)3) 6)572818V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profipress G V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profipress S V 15 570115

V 18 570125V 22 570135V 28 570145V 35 570155V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 12 570107Profipress Therm V 15 570115

V 18 570125V 22 570135V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508

Viega ProPress VUS ½" 571770System USA VUS ¾" 571775

VUS 1" 571780VUS 1¼" 571785VUS 1½" 571790VUS 2" 571795

XL-C/XL-S VUSF 2½" (PR-3B)3) 6) 572819XL-C/XL-S VUSF 3" (PR-3B)3) 6) 572820XL-C/XL-S VUSF 4" (PR-3B)3) 6) 572821Viega Propress VAU 15 (OD 12,7 mm) 572687WATER System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

Viega PropressG VAU 15 (OD 12,7 mm) 572687GAS System VAU 20 (OD 19,1 mm) 572689AUS VAU 25 (OD 25,4 mm) 572691

VAU 32 (OD 31,8 mm) 572693VAU 40 (OD 38,1 mm) 572695VAU 50 (OD 50,8 mm) 572697

Viega Raxofix VRX 16 571750VRX 20 571752VRX 25 571754VRX 32 571756

Viega VP 16* 570910Sanfix Fosta2) VP 20* 570915

VP 25* 570920VP 32 570925

Viega VP 16* 570910Sanfix Plus VP 20* 570915Viega Sanpress V 12 570107

V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VR 76,1 (PR-3B)3) 6) 572822VR 88,9 (PR-3B)3) 6) 572823VR 108,0 (PR-3B)3) 6) 572824V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 15 570115Sanpress Inox V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815VF 76,1 (PR-3B)3) 6) 572816VF 88,9 (PR-3B)3) 6) 572817VF 108,0 (PR-3B)3) 6)572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viega V 15 570115Sanpress Inox G V 18 570125

V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175VF 64,0 (PR-3B)3) 6) 572815VF 76,1 (PR-3B)3) 6) 572816VF 88,9 (PR-3B)3) 6) 572817VF 108,0 (PR-3B)3) 6)572818V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512

Viessmann TH 14* 570455TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

VSH MultiPress U 14* 570760U 16* 570765U 20* 570775U 25* 570780U 32 570785U 40 570790

VSH M 12 570100XPress Carbon M 15 570110

M 181) 570120M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH M 15 570110XPress Copper M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH M 15 570110XPress Copper M 181) 570120GAS M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH M 15 570110XPress Copper M 181) 570120Solar M 22 570130

M 281) 570140M 35 570150M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

VSH M 15 570110XPress Stainless M 181) 570120

M 22 570130M 281) 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708

Walter Meier U 16* 570765Metalplast U 18* 570770

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795U 63 (PR-3B)3) 572837U 63 (S) 572365U 75 (PR-3B)3) 572828

Watts MTR TH 16* 570460Art press TH 20* 570470

TH 26* 570475TH 32 570480

WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts WaterPEX US ¾"* 571460

US 1"* 571465US 1 ¼" 571470US 1 ½" 571475

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

Page 16:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

61

Pip

e p

res

sin

g te

ch

no

log

yP

ipe

pre

ss

ing

tec

hn

olo

gy

WATTS US ⅜"* 571450RADIANT US ½"* 571455Watts US ¾"* 571460RadiantPEX US 1"* 571465

US 1 ¼" 571470US 1 ½" 571475

WATTS U 16 (½") 570765RADIANT U 20 (⅝") 570775Watts U 25 (¾") 570780RadiantPEX-AL U 32 (1") 570785Wavin U 14* 570760Tigris K1 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795

Wavin U 14* 570760Tigris M1 U 16* 570765

U 20* 570775U 25* 570780U 32 570785U 40 570790U 50 570795

WeeConPress M 12 570100Alu M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530V 12 570107 V 15 570115V 18 570125V 22 570135V 28 570145V 35 570155V 42 570165V 54 570175V 12 45° (PR-2B)3) 574502V 15 45° (PR-2B)3) 574504V 18 45° (PR-2B)3) 574506V 22 45° (PR-2B)3) 574508V 28 45° (PR-2B)3) 574510V 35 45° (PR-2B)3) 574512SA 12 570930SA 15 570935SA 18 570940SA 22 570945SA 28 570950SA 35 570955SA 42 (PR-3S)3) 572710SA 54 (PR-3S)3) 572712

WeeConPress M 12 570100C-Stahl M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

WeeConPress M 12 570100Inox M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

WeeConPress M 12 570100Kupfer M 15 570110

M 18 570120M 22 570130M 28 570140M 35 570150M 42 (4G) 570160M 54 (4G) 570170M 42 (PR-3S)3) 572706M 54 (PR-3S)3) 572708M 12 45° (PR-2B)3) 574520M 15 45° (PR-2B)3) 574522M 18 45° (PR-2B)3) 574524M 22 45° (PR-2B)3) 574526M 28 45° (PR-2B)3) 574528M 35 45° (PR-2B)3) 574530

WeeConFlex TH 16* 570460MVR TH 20* 570470

TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

WEFA PLASTIC H 16* 570320WEFATHERM- H 20* 570350PRESS H 26* 570370

H 32 570380

WEM H 16* 570320U 16* 570765

WIELAND TH 14* 570455cuprotherm TH 16* 570460CTX TH 18* 570465

TH 20* 570470TH 26* 570475

Winkler TH 14* 570455TH 16* 570460TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400

WKS-Press TH 14* 570455TH 16* 570460TH 17* 570462TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485

XtraConnect F 16* 570715F 20* 570725F 26* 570730F 32 570735H 16* 570320H 20* 570350H 26* 570370H 32 570380TH 16* 570460TH 20* 570470TH 26* 570475TH 32 570480U 16* 570765U 20* 570775

(NW 26) U 25* 570780U 32 570785VP 16* 570910VP 20* 570915VP 32 570925

Zetaesse TH 14* 570455Multistrato TH 16* 570460EUROPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Zetaesse TH 14* 570455Multistrato TH 16* 570460ISOPEX TH 18* 570465

TH 20* 570470TH 26* 570475TH 32 570480U 14* 570760U 16* 570765U 18* 570770U 20* 570775

Zetaesse Rame TH 14* 570455HydroSAN TH 16* 570460

TH 20* 570470U 14* 570760U 16* 570765U 20* 570775

Zetaesse Rame TH 14* 570455ThermoSAN TH 16* 570460

TH 20* 570470U 14* 570760U 16* 570765U 20* 570775

ZEWOTHERM TH 12* 570452TH 16* 570460TH 17* 570462TH 18* 570465TH 20* 570470TH 26* 570475TH 32 570480TH 40 570485TH 50 (S) 572400TH 63 (S) 572405

ZURN US ⅜"* 571450INDUSTRIES US ½"* 571455ZURN PEX US ¾"* 571460

US 1"* 571465US 1 ¼" 571470US 1 ½" 571475US 2 ” 571477

System Pressing contour Art.-No. System Pressing contour Art.-No. System Pressing contour Art.-No.

Pressfitting systems for gas installations may only be pressed with the pressing tongs/pressing rings which are highlighted in yellow in the table. Observe the national regulations.* These pressing tongs also fit in the ROLLER’S Easy-Press manual radial press. Observe the national regulations.1) Only pressing tongs from designation “108” (1st quarter of 2008), “208” (2nd quarter of 2008) etc. can be used. The designation is stamped on every pressing jaw.2) Making the press joint with manual radial presses is not permitted for this pressfitting system.3) Adaptor tongs, see page 62, are necessary for driving the pressing rings (PR).4) Press fittings made of red bronze (ProPress XL) must be pressed with pressing rings with pressing contour VUSR, fittings made of copper (ProPress XL-C)

and stainless steel (ProPress XL-S) must be pressed with pressing rings with pressing contour VUSF.5) For accommodating suitable pressing inserts.6) Press fittings made of red bronze (Sanpress XL) must be pressed with pressing rings with pressing contour VR, press fittings made of copper (Profipress XL

and Profipress G XL), carbon steel (Prestabo XL) and stainless steel (Sanpress Inox XL, Sanpress Inox G XL) must be pressed with pressing contour VF.Suitability of the ROLLER’S pressing tools for pressfitting systems: Status 28.10.2013. The current status can be found on the Internet: www.albert-roller.de → Downloads → Product Catalogues, Brochures → ROLLER Catalogue. Pressing tongs/pressing rings for other press fitting systems on request.

Page 17:  · 46 Pipe pressing technology ROLLER’S pressing tongs ROLLER’S pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes

62

Pip

e p

res

sin

g t

ec

hn

olo

gy

Accessories Art.-No.

Adaptor tongs Z1 for driving ROLLER’S pressing rings 45° (PR-2B) 574500Adaptor tongs Z2 for driving the ROLLER’S pressing rings (PR-3S) 42 – 54 mm 572795Adaptor tongs Z4 for driving the ROLLER’S pressing rings (PR-3B) 75 mm 572801Adaptor tongs Z5 for driving the ROLLER’S pressing rings (PR-3B) VF / VR 64 – 108 mm and VUSF / VUSR 2½ – 4" 572802Steel case for 6 pressing tongs up to Ø 35 mm / 1" and pressing tongs U 40, U 50, TH 40, F 40, F 50, G 40, VUS 1¼, cropping tongs and shelf for pipe cutter up to Ø 42 mm 570295Steel case for 2 pressing tongs M 42 (4G) M 54 (4G), V 42, V 54, H 40, H 40 A, VUS 1½", VUS 2" 570290Steel case for adaptor tongs and 2 pressing rings for M 42 (PR-3S), M 54 (PR-3S), SA 42 (PR-3S), SA 54 (PR-3S) 572810Steel case for adaptor tongs and 4 pressing rings (PR-3B) VF 64.0 – 108.0 mm / VR 76.1 – 108.0 mm / VUSF 2½ – 4" / VUSR 2½ – 4" 572809Steel case for adaptor tongs Mini Z1 and adaptor tongs Z1 as well as 6 ROLLER’S pressing rings M 12 ‒ 35 45° (PR-2B) or V 12 ‒ 35 45° (PR-2B) 574516

ROLLER’S pressing tongsStandard version with 2 tiltable monoblock pressing jaws

ROLLER’S pressing tongs (4G)with 2 jointed, parallel guide pressing formers for straight pressing of medium dimensions

ROLLER’S pressing tongs (S) with one fixed and two jointed, tiltable pressing formers, for medium dimensions

ROLLER’S pressing rings (PR-3S) with 3 tiltable pressing formers guided on a jointed ring for large dimension complex pressings. Optimum pressing by radially controlled movement of the pressing formers with adaptor tongs

ROLLER’S pressing ring (PR-3B) with 3 pressing jaws for high quality, large dimension pressings Optimum pressing by radially controlled movement of the pressing jaws with adaptor tongs

German Top Quality

ROLLER’S pressing ring 45° (PR-2B) with 2 pressing jaws for pressings at places of difficult access, with adaptor tongs.

ROLLER’S pressing tongs / pressing rings Accessory for ROLLER’S radial presses (except ROLLER’S Multi-Press Mini ACC) and other makes