Now Selling Multi -Tool Brand Products...Tongs. We offer a good selction of quality tongs. Tom Tongs...

Modern Tools for the Modern BlacksmithStanley Tape Measures Stainless Steel RulersTransfer Punch SetsLetter/Number Punch SetsFlap DiskCutoff WheelsSanding/Grinding Disk ChiselsVise Grips Block Brushes Handle Brushes

Brass Brushes Candle CupsFire Place Shovel BlanksMonkey Tool SetsAviation SnipsSilver Marking Pencils Lamp PartsBrass Sheet Safety SuppliesBlacksmith Videos/DVD’s...and much more!

www.blacksmithsupply.comP.O. Box 3766 Chester,VA 23836 1-804-530-0290

Now Selling Multi-Tool Brand Products

http://www.blacksmithsupply.com/

April 2019 Edition

Prices are subject to change with no notice.Blacksmith Supply LLC is not responsible for printing errors or omissions.

We make every effort to stock items, but from time to time backorders will occur.We reserve the right to limit quantities.

Limitation of Liability: Blacksmith Supply LLC does not accept liability beyond the remedies set forth herein, including but not limited to any liability for product not being available for use. Lost profits, loss of business, except as expressly provided herein, Blacksmith Supply LLC will not be liable for any consequential, special, indirect or punitive damages, even if advised of the possibility of such damages, or for any claim by any third party. You agree that for any liability related to the purchase of the product, Blacksmith Supply LLC is not liable or responsible for any amount of damages above the amount invoiced for the applicable product. Notwithstanding anything in this agreement to the contrary, the remedies set forth in this agreement shall apply even if such remedies fail their essential purpose.

Return Policies / Exchanges: You must contact us directly before you attempt to return Product to obtain a Return Material Authorization Number for you to include with your return. You must return Product to us in its original or equivalent packaging. You are responsible for risk of loss, shipping and handling fees for returning or exchanging Product. Additional fees may apply. If you fail to follow the return or exchange instructions and policies provided by Blacksmith Supply LLC, Blacksmith Supply LLC is not responsible whatsoever for Product that is lost, damaged, modified or otherwise processed for disposal or resale. At Blacksmith Supply LLC’s discretion, credit for partial returns may be less than invoice or individual component prices due to bundled or promotional pricing.

Warranties: Blacksmith Supply LLC’s responsibility for malfunctions and defects in hardware is limited to repair and replacement as set forth in this warranty statement. All express and implied warranties for the Product, including but not limited to any implied warranties and conditions of merchantability and fitness for a particular purpose are limited in time to the term of the limited warranty period of 90 days.

www.blacksmithsupply.com 2

Tongs

We offer a good selction of quality tongs

Tom Tongs V JawV-Jaw Tongs with 12" Reins. 8650 steel, V notches in front and side of the jaws, all tongs have balls on the end of the handles.

Tom Tongs Bolt TongsBolt Tongs SM-MED8650 steel, V notches in front and sides of the jaws, flat handles with balls on the end for comfort of user

Tom Tongs Bolt Tongs Large 14" REINSBolt Tongs LARGE8650 steel, V notches in front and sides of the jaws, flat handles with balls on the end for comfort of user. Sizes from 3/4" To2 1/2".

Item Size Description PriceTC-200 3/16" V-Jaw $35.00TC-201 1/4" V-Jaw $35.00TC-202 5/16" V-Jaw $35.00TC-203 3/8" V-Jaw $35.00TC-204 1/2" V-Jaw $40.00TC-205 5/8" V-Jaw $40.00TC-206 3/4" V-Jaw $40.00TC-207 1 V-Jaw $40.00

Item Size Description PriceTC-212 3/16" BOLT $35.00TC-213 1/4" BOLT $35.00TC-214 5/16" BOLT $35.00TC-215 3/8 BOLT $35.00TC-216 1/2" BOLT $40.00TC-217 5/8 BOLT $40.00TC-218 3/4" BOLT $40.00TC-219 7/8 BOLT $40.00TC-220 1" BOLT $40.00

Item Size Description PriceTC-224-14 3/4" BOLT 14" REINS $45.00TC-225-14 7/8" BOLT 14" REINS $45.00TC-226-14 1" BOLT 14" REINS $45.00TC-227-14 1 1/4" BOLT 14" REINS $45.00TC-228-14 1 3/8" BOLT 14" REINS $45.00TC-229-14 1 1/2" BOLT 14" REINS $45.00TC-230-14 1 3/4" BOLT 14" REINS $45.00TC-231-14 2" BOLT 14" REINS $45.00TC-232-14 2 1/4" BOLT 14" REINS $45.00TC-233-14 2 1/2" BOLT 14" REINS $45.00


Tongs

Tom Tongs Box Jaw Tongs 1/4"1/4" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. Sizes through 1 1/4" have 12" reins, 1 1/2" to 2" have 14" reins. 1/4" x eight different sizes available

Tom Tongs Box Jaw Tongs 5/16"5/16" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. Sizes 3/4" and 1.0" have 12" reins, 1 1/2" through 2 1/2" have 14" reins. 5/16" x six different sizes available

Tom Tongs Box Jaw Tongs 3/8"3/8" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 3/8" Box Jaw Tongs have 14" reins

3/8" x in three different sizes are available

Item Size Description PriceTC-252-12 1/4 x 1/2" BOX JAW $40.00TC-253-12 1/4 x 3/4" BOX JAW $40.00TC-254-12 1/4 x 1" BOX JAW $40.00TC-255-12 1/4 x 1 1/4" BOX JAW $40.00TC-256-14 1/4 x 1 1/2" BOX JAW $40.00TC-257-14 1/4x 1 3/8" BOX JAW $40.00TC-259-14 1/4 x 1 3/4" BOX JAW $40.00TC-260-14 1/4 x 2" BOX JAW $40.00

Item Size Description PriceTC-265 5/16 x 3/4" Box Jaws $40.00TC-266 5/16 x 1" Box Jaws $40.00TC-267 5/16 x 1 1/2" Box Jaws $40.00TC-268 5/16 x 2" Box Jaws $40.00TC-269 5/16 x 2 1/4" Box Jaws $40.00TC-270 5/16 x 2 1/2" Box Jaws $40.00

Item Size Description PriceTC-275 3/8 x 1" Box Jaw $40.00TC-276 3/8 x 1 1/4" Box Jaw $40.00TC-277 3/8 x 1 1/2" Box Jaw $40.00

www.blacksmithsupply.com4

Tongs

Tom Tongs Box Jaw Tongs 1/2"1/2" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 1/2" x four different sizes available. 1/2" Box Jaw Tongs have 14" reins

Tom Tongs Box Jaw Tongs 5/8"5/8" Box Jaw Tongs8650 steel, round handles with balls on the ends, designed to hold bar stock securely. 5/8" x three different sizesavailable. 5/8" Box Jaw Tongs have 14" reins

Tom Tongs Scroll Tongs8650 steel, round handles with ball ends, 4 inch small scrolling jaws arebent at a 90 degree angle so you can work parallel with your piece. LargeScroll Tongs have 4 inch jaws that will not bend or warp under heavyuse. Five types/sizes available.

Tom Tongs Scroll PliersScroll PliersMade from 8650 steel, the handles have a rubber coating for better grip. These 3 inch scrolling jaws will not bend or warp under heavy use

TC-310 3 inch nose Scroll Pliers $35.00

Item Size Description PriceTC-282 1/2 x 1" Box Jaw $40.00TC-283 1/2 x 11/4" Box Jaw $40.00TC-284 1/2 x 1 1/2" Box Jaw $40.00TC-285 1/2 X 2" Box Jaw $40.00

Item Size Description PriceTC-290 5/8 x 1" Box Jaw $40.00TC-291 5/8 x 1 1/4" Box Jaw $40.00TC-292 5/8 x 1 1/2" Box Jaw $40.00

Item Size Description Price

TC-306 Long Nose Scroll $40.00TC-307 Short Nose 16 Inch Length $35.00TC-308 Short Nose 8 inch Length $35.00TC-309 90 Degree Nose 8 inch Length $40.00



Tongs

Tom Tongs Fire Tongs8650 steel, handles are flat with ball ends, jaws are tapered so you caneasily slide the tongs under the stock while in the fire, designed for usewith flat stock. Good Farrier tongs! Five sizes available.

Tom Tongs Wolf Jaw8650 steel, round handles with ball ends, V notch in the front of the jawswhile the sides of the jaws have different spaces for holding various sizesof stock. Two sizes available.

Tom Tongs Double PickupDouble Pick Up Tongs 8650 steel, round handles with balls on the ends,Jaw has two different openings to allow the user to pick up and work onvarious sizes of stock.

TC-331-14 14 inch Double $40.00

Tom Tongs Triple PickupTriple Pick Up Tongs 8650 steel, round handles with balls on the ends, Jaw has three different openings to allow the user to pick up and workon various sizes of stock. Double pick up has the same features onlywithout the smallest jaw size

Tc-330-14 14 inch Triple $45.00

Item Size Description PriceTC-316 1/4" Fire Tongs $35.00TC-317 5/16" Fire Tongs $35.00TC-318 3/8" Fire Tongs $35.00TC-319 1/2" Fire Tongs $35.00TC-320 5/8" Fire Tongs $35.00

Item Size Description PriceTC-326-15 Large Wolf Jaw $40.00TC-327-12 Small Wolf Jaw $35.00




Tongs

TC-335-08TC-336-08TC-337-08

V bit Plain Vbit

Duck Bill Duck Bill

Duck Bill at 45 Degrees

$35.00$35.00$40.00

Tom Tongs Duck BillDuck Bill handles are round with ball ends, V-bit tong has V notches in the front and sides of the jaws for holding small stock ; plain duckbill hasflat smooth jaws for holding small pieces of flat stock. Both of thesetongs have 8 inch hand

Tom Tongs Standard StyleOpen Mouth Tong - Open Mouth has a smooth flat grip surface that begins with an opening to more position thicker metal Closed Mouth has smooth flat grip surfaces that are closed and provide a wider area used for thiner material.

Tom Tongs RivetRivet Tongs8650 steel, round 14" handles with balls on the ends, designed for holding round stock perpendicular to the tongs whilemaking rivets.

Tom Tongs Pick-up TongsPick-Up Tongs / 14" reins8650 steel, 14" reins with round handles, andballs on the ends, Jaws have a V notch in the front to grab steel out ofthe fire easily and safe.


Item Size Description PriceTC-340 14 inch Open Mouth $35.00TC-341 14 inch Closed Mouth $35.00


TC-346 1/4" Rivet $35.00TC-347 3/8" Rivet $35.00TC-348 1/2" Rivet $35.00tc-349 3/4" Rivet $35.00

Item Size Description PriceTC-355-14 1 " 14 Inch Reins $40.00TC-356-14 1 1/2" 14 Inch Reins $40.00TC-357-18 2" 18 Inch Reins $45.00TC-358-18 2 1/2" 18 Inch Reins $50.00


Tongs

Tom Tongs U box Tongs 1/4"8650 steel, flat handles with balls on the ends, jaws are made so that thestock is held on edge by both sides of the tongs



Item Size Description PriceTC-399u 1/4 x 3/8" 12 inch Reins $40.00TC-400u 1/4 x 1/2" 12 inch Reins $40.00TC-401u 1/4 x 3/4" 12 inch Reins $40.00TC-402u 1/4 x 1" 12 inch Reins $40.00TC-403u 1/4 1 1/4" 12 inch Reins $40.00TC-404u 1/4 1 1/2" 12 inch Reins $40.00TC-405u 1/4 x 1 3/4" 12 inch Reins $40.00TC-406u 1/4 x 2" 12 inch Reins $40.00TC-407u 1/4 x 2 1/4" 12 inch Reins $40.00TC-408u 1/4 x 2 1/2" 12 inch Reins $40.00

Item Size Description PriceTC-421u 3/8 x 3/4" 12 inch Reins $40.00TC-422u 3/8 x 1" 12 inch Reins $40.00TC-423u 3/8 x 1 1/4" 12 inch Reins $40.00TC-424u 3/8 x 1 1/2" 12 inch Reins $40.00TC-425u 3/8 x 1 3/4" 12 inch Reins $40.00TC-426u 3/8 x 2" 12 inch Reins $40.00TC-427u 3/8 x 2 1/4" 12 inch Reins $40.00TC-428u 3/8 x 2 1/2" 12 inch Reins $40.00

Item Size Description PriceTC-431u 1/2 x 3/4" 12 inch Reins $40.00TC-432u 1/2 x 1" 12 inch Reins $40.00TC-433u 1/2 x 1 1/4" 12 inch Reins $40.00TC-434u 1/2 x 1 1/2" 12 inch Reins $40.00TC-435u 1/2 x 1 3/4" 12 inch Reins $40.00TC-436u 1/2 x 2" 12 inch Reins $40.00TC-437u 1/2 x 2 1/4" 12 inch Reins $40.00TC-438u 1/2 x 2 1/2" 12 inch Reins $40.00


Tongs

Tom Tongs Z box Tongs 1/4"8650 steel, flat handles with balls on the ends, jaws are made so that thestock is held on edge, jaws are also offset to allow the stock to extendpast the rivet in the tongs. This is a great tong for knifemakers! Ten sizesavailable.

Item Size Description PriceTC-399z 1/4 x 3/8" 12 inch Reins $40.00TC-400z 1/4 x 1/2" 12 inch Reins $40.00TC-401z 1/4 x 3/4" 12 inch Reins $40.00TC-402z 1/4 x 1" 12 inch Reins $40.00TC-403z 1/4 1 1/4" 12 inch Reins $40.00TC-404z 1/4 1 1/2" 12 inch Reins $40.00TC-405z 1/4 x 1 3/4" 12 inch Reins $40.00TC-406z 1/4 x 2" 12 inch Reins $40.00TC-407z 1/4 x 2 1/4" 12 inch Reins $40.00TC-408z 1/4 x 2 1/2" 12 inch Reins $40.00


Tom Tongs Rail Road Spike Tongs8650 steel, flat handles with balls on the ends.


TC-217 5/8 " 12 inch Reins $40.00TC-217-A Clamp Style 12 inch Reins $40.00

Anvils and Leg Vises

Kanca Anvils

H-11 Hand Blower $249.00

Forge Pot $329.00

Forge Pot12 x 14 firepot 3" inlet with dumping ash gate





K35 77 Lb $425.00 K50 110 Lb $675.00 K75 165 Lb $999.00

Hand Crank BlowerMade in Germany

Kanca Leg VisesItem Size Description Price

KV125 5 inch Leg Vise $349.00 KV150 6 Inch Leg Vise $499.00

Hammers

Choosing a hammer that fits your needs is an important step in blacksmithing. We try to offer a varity of styles and sizes to help you make your choice.

Swedish HammersSwedish Style

Standard Cross Pein

Polishing Hammer - Picard BrandMade In Germany A nice series from Picard, these polished hammers have 2 diferent convex heads. A top seller






101-0400 400gr ( 14OZ) Hammer $18.99 101-0500 500gr ( 1.1lb) Hammer $24.99 101-0800 800gr ( 1.75Lb) Hammer $29.99 101-1000 1000gr ( 2.2lb) Hammer $36.99 101-1500 1500gr ( 3.3lb) Hammer $44.99

548132 500 gr( 1.1lb) Hammer $24.99 548140 800 gr( 1.75lb) Hammer $29.99 548142 1000gr( 2.2lb) Hammer $36.99 548150 1500gr(3.3 lb) Hammer $44.99

French Hammer - Lock

30938 2.lb Hammer $17.99

543001 8oz Polishing $29.00543002 13oz Polishing $32.00543003 1.16lb Polishing $36.00543007 1.65lb Polishing $49.00543010 2.2 lb Polishing $79.00


S-48 3.lb Hammer $20.99

811-1000 1000gr (2.2lb) Hammer Picard $36.00 811-1500 1500gr (3.3Lb) Hammer Picard $29.99 5044031000 1000gr ( 2.2lb) Hammer Peddinghaus $42.99 5044031500 1500gr ( 3.3lb) Hammer Peddinghaus $54.99

Cross Pein Hammer

German Style Hammer

Hammers

Embossing HammerEmbosing hammers have 2 different heads.

Chasing Hammer Silversmith

Chasing Hammer - Picardfine polished, with ash handle; variously bowed peens,






546191 175gr Embossing $27.00

546192 250gr Embossing $29.00

546193 375gr Embossing $36.00

546194 500gr(1.1lb) Embossing $39.00

546195 750gr Embossing $47.00

546196 1000gr( 2.2lbs) Embossing $60.00

546281 400gr(.88lb) Silversmith $40.00

Grooving Hammer- Picard

Bordering Hammer - Picard

546181 250gr Chasing $36.00

546182 375gr Chasing $40.00

546202 375gr Grooving $36.00

546203 500gr Grooving $42.00

546220 200gr Bordering $29.00

546221 300gr Bordering $36.00


Hammers

Polishing HammerPolishing Crowned Faced

Doming Round Face

Shrinking Hammer

Shrinking Hammer

Great for leaf veining, small pien

Warding Hammer

Czech Style Blacksmith HammerShort Czech-German Shape with Ash handle



546112 200gr Shrinking Hammer $29.00 546113 375gr Shrinking Hammer $36.00546114 500gr Shrinking Hammer $39.00



16901-250 250gr Polishing $29.00

16901-375 375gr Polishing $32.00

16901-500 500gr(1.1lb) Polishing $36.00

16901-750 750gr Polishing $49.00

16901-1000 1000gr( 2.2lbs) Polishing $79.00

182374 4oZ Warding Hammer $12.00

Cross PeinItem Size Description Price

01302 2lb Cross Pein- Wilton $12.00

541012 2.75lb Czech $38.00

541015 3.3lb Czech $40.00

541017 3.8lb Czech $45.00

541020 4.4lb Czech $49.00


Hammers

Ergonomic HammerThis popular industry standard hammer is ergonomically designed to work with thenatural movements of the body. Made from top quality forged and heat treated toolsteel. Finished and fitted with shock mounted wood handle

Fitted with Robinia Handle( black locus) optimized form by the richexperience of Alfred Habermann

Habermann Hammer

Rounding Hammer




Blacksmith Supply – Custom Hammer Item Size Description Price

BB2 2.lb Hofi Style $115.00 BB3 3lb Hofi Style $120.00

286 1.5lb Rounding $32.00 285 2lb Rounding $36.00

545133 2.88lb Habermann $90.00

BS2 2.75lb Ergo-Hammer $110.00

BS2.5 3.3lb Ergo-Hammer $115.00

BS3 3.8lb Ergo-Hammer $120.00

Czech Style Hammer

Item Size Description PriceNR-2 2.lb Hofi Style $110.00 NR-25 2.5lb Hofi Style $115.00 NR-3 3.0lb Hofi Style $120.00

Czech Style Hammer made by Nathan Robertson


Video- DVD

Primer_DVDThis is the companion video to "A Blacksmithing Primer". The author, Randy McDaniel, of this indispensable reference book appears in these videos, teaching the standard techniques that all blacksmiths must know to master the craft. This is a must-have for every blacksmith's video library! You will learn how to organize your shop, build your first fire, hold and use your hammer, choose your stock, make tools for any job, forge weld, make scrolls, hinges, how to make animal and human heads and much, much more. Randy's simple, straightforward and humorous approach to learning to be a good blacksmith is as much a part of these videos as it is in his book. Shot and edited in the same clear, user-friendly style you have come to expect from Love of Art Productions, you will enjoy watching Randy demonstrate all the techniques close-up, just for you. This is a three tape/ DVD set, with almost 6 hrs of learning. You won't find a better resource for the beginning and intermediate blacksmith. We also have the companion book so you can watch the videos then take the book to the shop!

$129.99

Quality Educational Videos on a variety of subjects. We are dedicated to bringing you outstanding instructional videos onall kinds of art and craft topics by leading artist and craftsman educators. In the future we will be adding new titles as weacquire them.

Blacksmth PrimerA Course in Basic and Intermediate Blacksmithing

Continuing in the vein of its companion video, Leaves and Flowers, this tape demonstrates some insect and bird motifs that can be used and adapted for whimsical decorative work and garden-themed pieces. Epps is shown creating critters such as a scorpion, a garden snail and a dragonfly, as well as a hummingbird and two types of swans. These projects range from the extremely simple to the complex , and offer a quick way to add lots of ornamental appeal to a decorative project. Some of these items are used by the artist at demos as quick crowd-pleasers as well, taking only two or three heats to complete. Abrief “chalkboard” segment enhances the viewer's learning opportunity by outlining the steps in creating each item, and enhanced video and sound make Epps’ instructions clear and easy to follow.

Forged Animal HeadsThis tape is the first in a series featuring Mesquite, Texas blacksmith, Bill Epps

Bugs and BirdsA must-have for the hobbyist or professional! Running time 37 min

A nice introductory collage of images, underscored by folk music and a quote form Longfellow’s “The Blacksmith”, gives the viewer a clue that these videos are going to be different from most of what’s out there on the how-to market. In this video the viewer learns the steps in creating several novelty animal heads out of square stock and a novelty horse out of a horseshoe (Epps began his career as a farrier). The artist also discusses ideas on applications for the items shown. A “chalkboard’ segment introduces each item, breaking down the process of creating the heads and showing how the shape of the steel should change in each step. Epps includes tips on technique, including a discussion of the molecular structure of steel and why a smith makes his steel “square, then round”, and how to use a cross-peen hammer correctly. Forge-welding can be clearly seen in the making of one of the pieces, and Epps gives tips to the beginning blacksmith on how to get a good forge weld.



DVD-Bugs DVD $32.95


DVD-Animal DVD $32.95


Video- DVD

In "The Fly Press", you will learn to evaluate used fly presses, what to look for in a new press, how to make tooling, and much more. John also demonstrates many common blacksmith operations on the fly press such as making tenons, veining, straightening stock, bending precise circles and hot stamping. All of these techniques are shown to you in the exceptional way that Love of Art Productions has come to be known for clear, up close, and easily understood video instruction. John Crouchet says, "If you're working cold you may be making money!" What a novel idea!

Making Tongs with Bill EppsRunning Time 32 Min

The Fly PressThe fly press is becoming an increasingly popluar tool for the blacksmith

Making Tongs shows the blacksmith making three different styles of tong joints with three different tong heads. First we see the Twisted Joint, Scrolling Head tong, then the Traditional Joint, Wolf-jaw tong and finally the Champion Joint /Bolt Head tong. Epps also shows a variety of other specialty tongs he has made, and discusses the importance of a blacksmith being able to make his own tools. Tips such as howto quench moving parts will help the student blacksmith avoid frustrating mistakes in his own shop. The viewer sees the artist using a power hammer in this video to draw out tool handles, as well. As in the first video, Forged Animal Heads, the directors use careful editing, good voice-over enhancement and a chalkboard segment before every piece demonstrated, to help the viewer duplicate Epps techniques.

Broom Making For The BlacksmithSupplies available Soon From Blacksmith Supply

Jeff began his career in the arts and crafts business in 1976. Jeff apprenticed traditional broom making from a Carolina craftsman for a period of one year. He learned the different styles of tying brooms and creating unique wooden handles. In 1981, Jeff took up a hammer and began blacksmithing. He does interior and exterior architectural iron. In this tape Mr. Mohr shows us how to tie broom straw on to forged handles

Item Size Description PriceFly-Tape Tape $32.95Fly-DVD DVD $36.95


VHS-Tongs VHS $24.95DVD-Tongs DVD $32.95


VHS-Broom VHS $19.95DVD-Broom DVD $24.95


Video- DVD

DVD-hofipower DVDUri starts with a very brief statement about himself and then immediatelly gets to work. The stock necessary and the forging methods are explained before the forging of each piece.

The Hofi system teaches the forging of elements that can be used as parts of a larger project. Learning a few elements immediatelly makes the new smith productive. With an arsenal of elements learned over time the smith can create beautiful works quickly and easily.

Right, Uri explaining the steps to make an element from the 5/8" piece of stock he is holding. Depending on the element the raw stock, the finished work and how the work is handled on the dies is shown.

$39.95

Free Form Forging with Uri Hofi

DVD-Forging Sol DVDIn this video Amit introduces himself and gets to work right away.

This video covers power hammer basics using good combination dies and auxiliary crown dies. There are 30 chapters. The techniques shown ARE basic but cannot be performed on hammers with sharp undressed dies or badly shaped combo dies.

Among the techniques demonstrated are drawing, shouldering, heading and many examples of texturing

Flowers and LeavesThe professional or hobbyist blacksmith will want to add thesetechniques to his or her repertoire.

Running Time 52mins.

$39.00

Third in a series, this video features Bill Epps, a Mesquite, Texas blacksmith, demonstrating some of the techniques for making flower and leaf motifs for decorative projects. There are 5 leaves and 5 flowers demonstrated, including several ways of cutting veins into a leaf, folding and shaping the leaf form, and specific blossoms such as a rose, a morning glory, a dogwood blossom and a calla lily. Epps shows how to achieve surface texturing on leaves and petals to give a more naturalistic finish to the product, and discusses the merits of giving just the inference of a specific species, rather than trying for exact replication. The use of the guillotine tool, or top/bottom fuller, is shown. Applications for the individual items shown are discussed, and the viewer is encouraged to find his or her own ways of using these beautiful decorative details. Skilled photography and editing, and a working knowledge of the subject matter are evident in this video, as in all the others by Love of Art Productions


Forging Solutions : Power Hammer Techniques

Vol. 1 with Amit Har-levItem Size Description Price

Item Size Description PriceVHS-Leaves VHS $32.95DVD-Leaves DVD $39.95


Video- DVD

Basic Damascus PatternsFeaturing Mike Norris

Renowned knife maker Mike Norris leads the viewer through theimportant steps of forming basic Damascus patterns in preparing andforging the billet

DVD-Basic DVD $39.00Damascus Patterns

Steps include: Flux less WeldPower Hammer and Press welding/forming. Hydraulic Press with Textured DiesRolling Mill Grinding

Tools andTechniques

Featuring Amit Har-levAmit Har-lev demonstrating the making of anvil tools and techniquesusing them. Hardy, Fuller, bending fork, cone mandrel, dish swage andon the bonus CD a shelf stake

DVD-Tools and DVD $39.00Techniques

A Damascus Bladefrom A to Z

Featuring Mike NorrisMike Norris demonstrating step by step how to make Damascus(laminated) steel blade. Includes forging, grinding, heat treating,etching, fitting furniture, assembly and finishing. See also: BasicDamascus Patterns

DVD-Damascus DVDBlade

$39.00





Video- DVD

60 minutes + bonus, DVD onlyDVD-Rose DVD $39.00

Forging a Copper Rose

Featuring Amit Har-levAmit Har-lev forging a one piece copper rose using hand and power techniques. Step by step from blank size to finishing. Bonustoolmaking, the chisel, a forged gouge (used in making the rose).

Produced by Big BLU Hammer Mfg., Co. filmed at Oak Hill Ironworks.

80 minutes, DVD only.DVD-Joinery DVD $39.00

JoineryTechniques

Featuring Amit Har-levAmit Har-lev demonstrating joinery techniques using hand and power techniques. Riveting, wrapping, wedging and much more. . Step by step


1 hour 27 minutes, DVD only.DVD-Power Repousse'

DVD$39.00

POWER Repousse' and Chasing

Featuring Andrew ChapmanUsing power hammers and hand held pneumatic hammers for largescale repousse'. Creating a high relief abstract human face in steel.





Video- DVD


75 minutes, DVD only.DVD-Power repousse # 2

DVD $39.00

POWER Repousse' Featuring Andrew Chapman Part 2

Using power hammers and hand held pneumatic hammers for largescale repousse'. Forging and sinking copper bowls and more.

Part two of a three part series.

Part one of a three part series

DVD-Repousse' Part DVD1

$39.00

Repousse' Featuring Andrew Chapman

Techniques using forms to create designs in a negative space. Formingcopper and steel to make large repousse' wall decorations in the metalsstudio. Sun/Earth form and the Oakhill Ironworks copper leaf logo.



DVD-Toby Hickman DVD $42.00

Repousse' Featuring Andrew Chapman

In this DVD Toby shows and describes how to make a pair of box jaw tongs which hewill forge using his Striker 88# Air Hammer. To make the tongs several techniquesand skills will be shown. These include: the hit turn technique; forging to dimensionusing stops; and the use of hand held tools under the power hammer dies. The toolneeded to make the tongs will also be forged and its layout shown. At the end of theDVD is a section where the math is clearly explained which is necessary to calculatethe amount of steel needed to forge the tongs from any stock size of 4140 ofsufficient mass. One hour run time.


Toby Hickman’s Power Hammer Techniques


Coal Forges

All the forges are imported from Germany. Angele is the Leading Blacksmith Supplier in Europe and we stock the whole range of products for blacksmithing and metal design

Coal Forge Electric

116001 $879.00single phase 110 V,for solid fuel coal table top 24 x 20 inches, height 32 inches complete with blower with drop cord 8 foot with plug complete with hearth sole with cast iron fire pan 8" x 8", air valve and ash-cleaner bow rack for suspension of toolsweight 82.00 Lbs

Coal Forge - Hand Crank

116020hand operated;for solid fuel (coal), cast iron fire pan 220 x 200 mm, table top 600 x 500 x 4 mm, height 800 mm,handblower with gear train with handle, complete with hearth sole with cast iron fire pan, with ash-cleaner, bow for suspension of tools

Angele Hand BlowerGear Train with handle – Made in Germany

$769.00

H-11 Hand Blower $249.00

Forge Pot $329.00

Forge Pot12 x 14 firepot 3" inlet with dumping ash gate






Hand Crank Blower

Hand Crank Forge

Electric Blower Forge

Forge Pot Kit $275.00

Gas Forges

Exclusive High Efficiency Burners

Push Button Ignition

Uniform Heat...Reaches 2350°

Quick Recovery...Heats and Reheats Metal Very Quickly

Flexible...Rear Bar Stock Door Allows Heating Sections of Bar Stock. (Optional on Some Models)

No Blower Required

Fuel of Choice...Comes Fitted For Propane, But May Be Configured For Natural Gas

Transportable...Light Weight and Quick Cooling

Hose, Gauge, and Regulator Included

Quality Assured...We Stand Behind Our Products

Whisper Baby NC ForgeWorks well for smaller jobs 1 buner forge Firebox 3"x7" x 6 1/2"

1 Burner Forge

Firebox 3" x 7" x 6-1/2"

Rear Bar Stock Door Allows Bar Stock To Be Run Straight Through The Forge0107 WB 1 Burner $455.00

2 Burner2 Burner Shoer's Forge Firebox - 3" x 12" x 6" Rear Barstock Door Standard - 1 1/2" x 3"

$590.00


WHISPER MOMMA2 Burner Shoer's Forge



Gas Forges

End Ports Allows Bar Stock To Be Worked From Either End Or Allows The User a 12" Heat In The Middle Of A Bar

0113 2 Burner with open $645.00Ends

WHISPER MOMMA - OPEN ENDS2 Burner Shoer's Forge

Firebox - 3" x 12" x 6"

Open Ports on Each End of Forge

Special Made For the Knifemaker Who Forges Blades or Damascus. Equipped With Insulated Doors On Both Ends For Easy Entry AndRemoval Of Damascus Billets

0111 Knife Makers 2 BurnerFirebox - 4"H x 4 - 1/2"W x 13 - 1/2"L

2" x 3" Exhaust Port On One Door

WHISPERDADDY MODEL #2

$764.00

KNIFEMAKER FORGE

Whisper Daddy Model #23 Burner Blacksmith's Forge

0115 3 BurnerFirebox - 6" x 12" x 9"

WDII

Rear Bar - Stock Door Standard 2" x 3"

WHISPER DADDY MODEL #2

W/ OPEN END PORTS3 Burner Blacksmith's Forge

$750.00

Firebox - 6" x 12" x 9"

Bar - Stock Door 2" x 3"Work Metal Bar From Either End And Straight Out Through The Other Side When A Long Heat IsRequired In The Middle Of The Bar - Will Accommodate Large Stacks Of Metal For Production Work

0116 3 Burner Open End

Whisper Daddy Model #2 w/open w/open ends





$812.00


Swage Tools

Swages ductil iron

Spoon SwageLarge Sppon Swage

LPS l Spoon $18.00

Lladel Ladel Swage $28.00

Ladel Swage

RPS Rose Swage $24.99

Rose Pedel SwageGreat for leaf work

Vswage $24.99

V SwageMulti V swage used in vise

R-swage Round Swage $24.99

Round SwageMulti rounds from 1/8 to 1/2 inch

SW4 $135.00

Small Swage BlockIncludes Fireplace Shovel Blank and ladels








Swage Tools

SW1 10X10 64Lb $179.00

Swage BlockNice Variety of shapes

Good Shapes Spoons, Ladels

SW2 8X14 54 Lbs $179.00

Swage Block

Walley Set 12X12 125lbs Each $1050.00

A Classic ReturnsWalley Yater SetSold in Sets ONLY

Walley YaterSets Only





Smithin Magician

Blacksmith made 100 years ago and still used by today's Blacksmith

Smithin Magcian - AssembledCompletely assembled - No Dies included

sm3 SM3 Assembled $139.00

Complete Kit includes blank Mild Steel Die, needed to assemble

Sm3- Kit SM3 Kit $89.00

Smithin Magcian - Kit

990002 Fuller Dies $70.00

SM Fuller DiesFuller Dies - 4140 Heat Treated .5 radius

990001 Cut Off Die $98.00

Sm Cut Off DiesCut Off Dies S-7 Tool Steel

990005 Butcher Die $60.00

Sm Butcher DiesButcher Dies 4140 heat Treated

990004 Beading Die $70.00

Sm Beading DiesBeading Dies, makes 1/4 bead in material








Smithin Magician

Grooving Die, makes small V Groove in material

990003 Grooving Die $60.00

Sm Grooving Die

9900074140 Blank

$19.00

Sm Blank 4140Blank 4140 Die

990008 Mild Steel Blank $5.50

Sm-Blank Mild SteelMild Steel Blank




Sm- Hardie Plate


Pmbase3/4 3/4 hardie SM Base Plate $29.00

Pmbase7/8 7/8 hardie SM Base Plate $29.00

Pmbase1 1” hardie SM Base Plate $29.00

Anvil Plate for Smithin Magician – Drilled and tapped

Tenon Die for 1/4 and 3/8 tenons

990009 Tenon Die $55.00

Sm Tenon Dies



Forming Tools

I-coneball Cone and Ball $110.00

Cone and Ball forming tool1 Inch hardie tool. Polished heads

Small Leaf $90.00

I-OL off set Leaf V $90.00

Offset Leaf V FormGreat when you to form a leaf with branches

Good for V forming of curling leaves 1 inch hardie Tool

I-fd Fiddle Head $90.00Fiddle Head Formil

I-bv Big V Swage $90.00

Big Leaf V swage1 inch hardie

I-cup Off Smal Cup with Off set

$90.00

Small Cup Off SetSmall Cup with 1 " Hardie







I-sv

Small Leaf Deep SwageLeaf forming swage 1 inch hardie


I-cup Cup Forming Tool $90.00

Small Cup or Leaf ToolUsed for small Cupping work- 1inch Hardie


Fiddle Head Leaf Viener

Multi Tool Grinders


MT362 Grinder Attachment $229.00

Multi Tool Grinder AttachmentMounts to Bench Grinder 2x36 Belts


MT362P6J Grinder Jet MT $449.00

Multi Tool Grinder AttachmentMounted to Jet Brand Bench Grinder 2x36 Belts


These popular Belt Grinder Attachments are widely known for being the most used tool in one's shop! Upgrade your existing bench grinder with the attachment only, or start fresh with one of the JET Grinder Bundles

Multitool fits most popular brands of grinders with screw-on type wheel guards with no special adapter required. The fitting kit contains a universal adapter with radial slots to suit the wheel guard mounting holes, and easy to follow instructions. (See documents tab for fitting template) Multitool will NOT fit a grinder with heavy cast wheel guards if the guards are used to retain the spindle bearings. We recommend a quality 1/2 hp grinder as a minimum with 3/4 hp preferred. Shaft size must be 1/2 inch or 5/8 inch. With a standard 3,450 RPM grinder belt speed is approximately 5,400 surface feet per minute.

Jet ½ HP Grinder Jet MT $679.00

Multi Tool Belt and Disc Starter KItAttachment

M Item Size Description Price

Jet 1 HP MT362P8J

Four bar combination buffing compound set Talc Polishing Belt (T-SC) (2 x 36)Trizact Assorted 3pk (A80-220 grit, A45-400 grit, A16-1200 grit) 2 x 36Assorted 7 Inch Abrasive Disks 3 pk (40, 80, 150 grit)3M Alumina Zirconia Assorted Belts (40, 80, 120 grit) 2 x 26

See Below $99.00Kit MTK362

Multi Tool Belts – Various Grits Item Size Description Price

36x40 2x36 40 Grit Alum Oxide $4.50

36X80 2X36 80 Grit Alum Oxide $4.50

36X100 2X36 100 Grit Alum Oxide $4.50

36TZ220 2X36 Trizact 220 Grit 3M A80 $15.00



36PBLTSF 2X36 Polishing Belt 3M $21.00

Texture Tools

Off Center brand texturing and forging hand tools for use on the power hammer, fly press or anvil. Made in the USA. Forged using diemakers dies means you get 1st generation output instead of the standard homemade third generation. The depth and clarity of any texture is dependent on process used in creating it.See note on spring swages for further information on the need for not using mild steel for dies. Forged from 4140 with a unique heat treating process means it lasts longer too!

101 Leaf TexturingOC 101 Leaf Texturing hand tool. Off Center brand made in USA

406 leaf 101 $50.00

365 leaf 103 $50.00

103 Curved Vein Leaf Tool

409 106 leaf $50.00

106 Straight Vein Leaf Tool

410 Beaded Leaf $50.00

108 Beaded Vein Leaf Tool

427 Cactus $50.00

Cactus Texture Tool

Dragon Scale ToolBring your amphibians to life with this texture. Great for lizards, snakes, dragons, frogs, etc.

447 Dragon $50.00








Texture Tools

389 Oval $50.00

Oval Texture Tool

397 Woodgrain $50.00

Wood Grain ToolOff Center brand Wood Grain texturing tool.

Subtle wood grain.

398 Pebble $50.00

Pebble Texture Tool





Hardie Tools

51200i 1 inch shank Cut off - German $40.00

Hardie Cut off1 inch hardie

TC-890 5 inch tall Small Horn $54.00

Hardie Horn – 4140 Steel1 inch shank

Used to start scrolls an old European tool

511300 1 inch Hardie 5 inches tall $55.00

Swan Hardie

511311 1 Inch hardie 5 inches tall $48.00

Turning Hardie1 inch shank






Forge Supplies

shovelblank $8.00

Shovel BlanksShovel Blank - Steel

candlecup $1.90

Candle CupsCandle Cup Fits Std Tapered Candle, price is each

candle cup brass $1.25

Candle Cup _ brass finishCandle cup 1 3/16 tall Brass plate 24 guage 3/8 hole in bottom

candle cup chrome $1.25

Candle Cup Chrome FinishCandle cup 1 1/4 inches tall 23 guage material 3/8 hole in bottom

Drip Pan small $1.25

Drip Pan 2.5 inches2.5 inches across 12 guage

L-drip pan $1.50

Drip Pan 2 7/8 inch2 7/8 inch across 12 guage


Forge Supplies

T1 $18.99

Tuyure ReplacementGreat replacment for old portable forges

KVA65285 Kevlar Gloves Hot Mill

$18.00

Kevlar GlovesSold in pairs ONLY

Silverpencil Steel Marking $2.00/3

Silver Pencils

TongRing-s Tongring-L

Small Large

$4.00$4.50

Tong RingAvailable in 2 sizes

Rosekit Full Rose Kit $10.00

Rose BlankMake your own rose- DVD available

Center Finding RulesGreat layout Tool



23112 12 Inch Center Finding Rule $5.00




23148 48 inch Center Finding Rule $22.00


Forge Supplies

Includes 1/4, 3/8 and 1/2 Sizes made from S-5 Steel

monkeytoolset 1/4,3/8 and 1/2 Includes all 3 Sizes $45.00

Monkey Tool Set

airgate 3" Pipe Size $15.00

Air GateFor 3" pipe

ScissorCutter $60.00

Scissor CutterMachined - A Quality Tool

pflatter Flatter For Power Hammer

$60.00

Flatter Power HammerQuality Made Tool

Tomdrift 12" Tomahawk Drift $22.00

Tomahawk DriftDoes all Sizes Ductil Iron

Perfect for Hammer Eye- Ductil Ironsteel

Hammerdrift 10"Hammer Drift $22.00

Hammer Drift








Fly Press Tools

We offer a selection of the most commonly used Fly Press Tooling

Power Brushes - 2 3/4 Mini Crimp Cup Brush

FP Tool Adapter 1“ shank 1” Tool End $65.00

Fly Press Tool Holder Adapter

Fly Press BS Punch Set AdapterUse this adapter to use our BS- Punch Set in your Fly Press

PMT Fly Press Collar $29.00

Knot Wheels, Threaded - Standard Twist - Carbon Steel Wire .

BS Punch set of 16 different punches Comes with TongsBS- Punch Set 17 Pcs Set

FFly Press Ball Attachment

BS-Punch Set 17 Pcs Set

Power Brushes - Minigrinder Wheels - Full Cable Twist

$359.00

Fly Press – V Press Tool






PMT-Fly Ball Tool 1 1.5LB Fly Press 1 “ Ball 1” Shaft $45.00

PMT-Fly V Tool 4.75lb Fly Press V Tool 1” Shaft $45.00


New Additions

Includes holder and 1 pc of soapstone

Round Soap Holder ¼ Round Holder $4.00

Round Soap Stone Holder

Round Soap Size1/4 $3.00

Round Soap StoneFor holder above

Leather Apron – 24X36

Brass Ruler

Leather Shot Bags

Boone Claw Tongs







5 pcs

SBApron 23X36 Leather Apron $42.00

Brassruler 2 Foot Brass Ruler – Folds $29.00

SBR8 8” 8” Leather Shot Bag $19.99

SBR12 12” 12” Leather Shot bag $32.00

SBR14 14” 14” Leather Shot bag $38.00

Designed by Smyth Boone of Colorado

BS-Boone 12” Boone Claw Tongs $45.00


Brushes

We offer a selection of the most commonly used brushes

Power Brushes - 2 3/4 Mini Crimp Cup Brush

82243P 2-3/4 5/8-11 .014 Carbon Steel Wire 7/8 14,00082243p 2 3/4" Mini Crimp

Brush$15.00

Bench BrushesADVANCE BRUSH offers a complete range power brushes for Industrialuse

81449 8" Pferd Bench Brush $15.00Economy bench wheels by Advance brush are manufactured to suit the needs of the occasional user.Brushes feature a medium density fill with untempered wire for low cost and good service life. Sectionincludes single section, standard face width brushes in Carbon Steel wire

81445 6" Pferd Bench Brush $12.0081445 6 5/8, 1/2 .014 Carbon Steel Wire 1-1/8 5/8 8,000

Knot Wheels, Threaded - Standard Twist - Carbon Steel Wire . Standard twist knots are twisted for approximately 75% of the length of the knot. They offer faster removal rates than crimped wire wheel brushes, with a more aggressive brushing action.

These Advance wheel brushes are manufactured with threaded arbor holes for easy mounting and unmounting on threaded shaft power tools

82154 4" Std Knot Brush

Power Brushes - Minigrinder Wheels - Full Cable Twist

$15.00

4" display-packaged high speed mini wheel brushes

82186p 4" Stringer82165P 4 5/8-11 Thread .014 Carbon Steel Wire 24 3/4 3/8 20,000

$15.00

82186P 4 5/8-11 .020 Carbon Steel Wire 32 3/4 3/16 20,00082186p 4" Stringer Bead $15.00

Minigrinder Wheels - Stringer Bead Twist4" display-packaged high speed mini wheel brushes







Brushes

For maximum performance knot wheel brushes, COMBITWIST knot design offers market-leading performance

82383p 4" Combitwist 5/8 -11 $16.00

COMBITWIST Knot Wheels

85004 3x19 6-1/4 Stainless Steel Wire 13-3/4x5/8 1-3/1685004 Curved Scratch

BrushStainless Steel $6.00

Curved Handle - Wooden BlockGeneral purpose brushing tools for maintenance applications

89545 Brass .005 Wire 1 31/8 X 13 4 Rows Brass Brush $10.00

Brass Platers Brushr Replacement Brushes

SB104 5x10 7-3/4 Carbon Steel Wire 2-5/8 1-1/4 Block Brush $12.00

Flat Wire Block Brushes -Straight Back Flat Wire Block Brushes

SB410 8x12 9-1/4 Carbon Steel Wire 3-3/4 1-1/4 Jumbo BlockBrush

$22.00

Jumbo Flat Wire Block BrushJumbo Flat Wire Block Brush

85098 5x10 7-3/4 Carbon Steel Wire 2-5/8 Flat Wire Casting Brush $18.00

Flat Wire Casting Block BrushesFlat Wire Casting Block Brushes








54036 Brass .005 Wire 1 31/8 X 18 4 Rows Brass Brush Heavy $12.00

Vise Grips

Blacksmith made 100 years ago and still used by today's Blacksmith

Locking Welding ClampLocking Wrench StyleVise Grip Locking Wrench Style Great with Treadle Hammer punches

Locking C Clamp with Swivel Pads

Locking C Clap


00008 4 inch Locking C $12.00




Chisels

Hot ChiselMade From H13- German made

518501 Hot Chisel $ 17.00

Ball Punch SetMade From S-7Part Number Desc Priceballset 6 Pcs Set $ 65.00

Eye Socket Punch SetMade From S-7Part Number Desc Priceeyepunch 6 pc Set $ 95.00


Books

Backyard Blacksmith – Lorelei Sims184 pages and 250 Illustrations

Book Backyard 8 ½ X11

Traditional Techniques for the Modern SmithThe Backyard Blacksmith shows you how - with some patience and a working knowledge of metals, basic tools, and techniques - blacksmithing can be easy to learn and a rewarding hobby. Detailed step-by-step full-color exercises teach all the universal skills and techniques used to forge iron; like having a master blacksmith by your side. It provides the reader with an understanding of the properties and characteristics of forging hot metal, making the craft accessible to those without previous experience. More than 20 detailed, beautiful and functional step-by-step projects organized by difficulty level including all the techniques needed to succeed. Try it!

$20.00


Blacksmith’s Cookbook Recipes In Iron – Francis Whitaker153 pages and 144 Illustrations

Book cookbook 6 X 9 1/2

Quick OverviewNEW reprint with index!This book is the result of ten years of workshops, demonstrations and master classes. The idea of the title for 'The Blacksmith's Cookbook' was to give credit to blacksmith's wives, especially my own. There is a similarity between forges and kitchens, basic equipment, basic tools and the often exquisite results. A large part of my success is due to the devoted help of my wife, and I am sure this applies to many other smiths. F.W.


$40.00

A Blacksmith’s Craft – George Dixon153 pages and 144 Illustrations

Book ABC 8 X 10

The Legacy of Francis Whitaker: Vol IThis is a compendium for blacksmiths at any level to preserve techniques and processes essential for the mastery of all levels of traditional blacksmithing. The beautiful illustrations and clearly demonstrated techniques make this the book to become the standard by which all others will be measured


$40.00


Books

A Blacksmith Primer – Randy McDaniel184 pages and 400+ Illustrations

Book Primer 8 X10

Quick OverviewA Course in Basic & Intermediate Blacksmithing, 2nd EditionThe smith has probably done more to change the world than any other craft. The blacksmith contributed to the settling of this New World by making and repairing weapons, tools, hardware, and all forms of devices for transportation. Eventually this led to assisting in our independence from other countries. This is a long term reference manual and fine blacksmithing companion. It is an excellent resource for advancing your knowledge and skills in blacksmithing. This step-by-step text includes over 400 detailed drawings and illustrations to help increase comprehension levels and more than 20 projects provide opportunities to put these skills to use

$25.00


Chasing and Repousse’ – Nancy Megan Corwin183 pages and 450 Illustrations

Book Chasing 8 1/4X 11

Quick OverviewChasing and Repoussé have been used for centuries to embellish metal objects. This long awaited book provides lucid and practical instruction that will appeal to beginners and advanced craftspeople. With more than 450 photos and illustrations, including studio process and diverse master works collected from artists around the world, Chasing and Repoussé elegantly fills a need in the literature of metalsmithing.

Item Size Description Price$40.00

Iron Menagerie – Guild Of Metalsmiths34 pages and 179 Illustrations

Book Menagerie 11 1/2 X 8 3/4

Quick OverviewThis book explains how to forge fifteen different animal heads. Blacksmith Paul Hubler hammered out all the projects in this book and explains every step in forging animal heads. Iron Menagerieclearly demonstrates every step in the animal head making process so any person with a minimal amount of experience can easily follow the instructions. It was written to fill a need for developing blacksmithing skills in creating decorative fantasy animal heads.

$20.00Item Size Description Price


Books

The Skills of A Blacksmith Vol III – Mark Aspery368 pages and 1600 Illustrations

Book Skills Joinery 8 ½ X11

Quick OverviewMastering the fundamentals of Traditional Joinery by Mark Aspery guides the blacksmith in developing the technical skills and understanding required for forging traditional joints. Mark Aspery's concise step-by-step descriptions complement over 1,600 crisp photographs that take the smith from developing the tooling through to the completed joinery project.


The Skills of A Blacksmith Vol II – Mark Aspery300 pages and 1144 Illustrations

Book Skills Leaf Work 8 ½ X11

Quick OverviewMastering the Fundamentals of Leaf Work VOL IIVery clear, step-by-step instructions on the forging of leaves including the related tooling needed. The most complete leaf book ever!


The Skills of A Blacksmith Vol I – Mark Aspery300 pages and 1118 Illustrations

Book Skills Fundamental 8 ½ X11

Quick OverviewMastering the Fundamentals of Blacksmithing Vol. IAn excellent presentation of the technical aspects of blacksmithing as well as the basic fundamentals. Physics and chemistry are translated into an easy to understand language



Smithin Magician

Pricing

Assembled $139

Kit $89

Introducing a new version of the Blacksmith's Journal classic design in kit form. The Smithin' Magician III can be used to fuller grooves & shoulders, draw out accurate square and round tenons, and make square cuts. It’s an indispensable tool for any blacksmith shop. Extra cold rolled blanks, precision milled tool steel blanks, and finished die sets are available. You can purchase the Smithin' Magician already assembled or in kit form. It's in our on-line store, under the product line of Smithin Magician.

WWW.BLACKSMITH SUPPLY.COM

PO Box 3766Chester, VA 23831 804-530-0290www.blacksmithsupply.com

Jos F. Bechal, Mostly Metal - BC Canada "...I am really impressed with the Smithin' Magician. It's handier than I ever dared to hope! I do production runs for a commercial shop and consistency is very important. Thank you for a terrific little gadget. Don't know how I lived so long without it."

www.blacksmithsupply.com

Now Selling Multi -Tool Brand Products...Tongs. We offer a good selction of quality tongs. Tom Tongs...

Documents

Transcript of Now Selling Multi -Tool Brand Products...Tongs. We offer a good selction of quality tongs. Tom Tongs...