4 1-3287291 - ACS College Of Engineering - Mysore Road in …acsce.edu.in/acsce/pdf/mandatory...

29
Format for Mandatory Disclosure Mandatory Disclosure 1 AICTE File No. South-West/1-2017625631/2014-EOA. Date & Period of last approval 4 th June 2014, 2014-2015 Permanent Institution ID 1-3287291 2 Name of the Institution ACS College of Engineering Address of the institution #207,Kambipura, Bangalore-Mysore Highway, Bangalore - 560 074 City & Pin Code Bangalore – 560 074. State / UT Karnataka Longitude & Latitude φ Latitude 12 Degree 58 Minutes North, λ Longitude 77 Degrees 38 Minutes East Phone number with STD Code 080 - 28437955,080- 28437855 FAX number with STD Code 080-28437989 Office hours at the Institution 8:30am to 4:30pm Academic hours at the Institution 8 hours per day Email [email protected] [email protected] Website www.acsce.edu.in Nearest Railway Station( dist in Km) Kengeri – 2 Km Nearest Airport (dist in Km) Bangalore International Airport, Devanahalli, Bangalore ( 29 Km) 3 Type of Institution Private-Self Financed Category(1) of the Institution Common Category (2) of the Institution Co - Education 4 Name of the organization running the Institution Moogambigai Charitable & Educational Trust Type of the organization Trust 1

Transcript of 4 1-3287291 - ACS College Of Engineering - Mysore Road in …acsce.edu.in/acsce/pdf/mandatory...

Format for Mandatory DisclosureMandatory Disclosure

1AICTE File No. South-West/1-2017625631/2014-EOA.

Date & Periodof last approval

4th June 2014, 2014-2015

Permanent Institution ID 1-32872912 Name of the Institution

ACS College of Engineering

Address of the institution #207,Kambipura, Bangalore-Mysore Highway, Bangalore - 560 074

City & Pin CodeBangalore – 560 074.

State / UT KarnatakaLongitude & Latitude φ Latitude 12 Degree 58 Minutes North,

λ Longitude 77 Degrees 38 Minutes EastPhone number with STD Code

080 - 28437955,080- 28437855FAX number with STD Code

080-28437989Office hours at the Institution 8:30am to 4:30pmAcademic hours at the Institution

8 hours per dayEmail [email protected]

[email protected] www.acsce.edu.inNearest RailwayStation( dist in Km)

Kengeri – 2 Km

Nearest Airport (dist in Km)Bangalore International Airport, Devanahalli, Bangalore ( 29 Km)

3Type of Institution

Private-Self FinancedCategory(1) ofthe Institution Common

Category (2)of the Institution Co - Education

4

Name of the organization running the Institution Moogambigai Charitable & Educational Trust

Type of the organizationTrust

1

Address of the Organization Moogambigai Charitable & Educational Trust# 14,RajaRajeswari Dental college and hospitalSub Registrar Kengeri, Dist. Bangalore 560 074Phone 080-28437513, 28437293Fax 080-28437393

Registered WithAct 1962

Registration DateEst. in 1992, Reg. on 28 May, 1992

Website of the Organizationwww.rrgroupinsts.org

5Name of the affiliatingUniversity Visvesvaraya Technological UniversityAddress Jnana Sangama, Belgaum - 590018, Karnataka.Website w w w.vtu. ac .in Latest affiliation Period 2014 - 15

6Name of Principal

Dr.H.B.Phani Raju B E.,M.E.,Ph.D(VTU).,MISTE

Exact Designation PrincipalPhone number with STD Code 080 - 28437955,080- 28437855FAX number with STD Code 080-28437989Email p r incip a l@ acsce.edu.inHighest Degree Ph. DField of specialization Electrical Sciences(Engg & Tech)Experience ( Years) Academic : 32 Research : 8 Industry : 2

7

Governing Board Members

Sri. A.C.ShanmugamManaging TrusteeMoogambigai Charitable & Educational Trust, Bangalore.

B.A, L.L.B

Chairman & Managing

Trustee

Sri.A.C.S. Arun kumarVice Chairman,RR Group of Institutions, Bangalore

B.Tech(Honors)M.B.A,

Member

Dr.P.T.ManoharanFormer VCDr.MGR Educational &Research Institution, Chennai

Ph.D.Member

Dr.M.VenkatachalappaProf & Chairman(Retd)Dept of Mathematics,Central College Campus, BangaloreUniversity, Bangalore.

Ph.D. Member

Dr. Ravi Kumar B NProfessor and Hod/Civil,

Ph.D. Member

2

Governing Board Members

ACS College of Engineering, BangaloreProf.R.M.VasagamFormer Vice ChancellorAnna University Chennai.

M.E Member

Dr. Sundaresan MProfessor, AcademicianAICTE ,South-WesternRegional Office, BangaloreKarnatakaPin:560 009

Ph.D AICTE-Nominee

Prof. H.U.TalwarDirectorDirectorate of Tech. Education, Bangalore

BE, M.Tech, Member

Prof. R .R ElangovanFormer, Scientist ,ISRO,VSSC,Hod/Aero,ACS College of Engineering,Bangalore.

Bsc,D.M.I.T,M.Tech Member

Dr. Phani Raju H BPrincipal,ACS College of Engineering,Bangalore

Ph.DMember-Secretary

8

No. of meeting in previous year 2

Latest GC meeting held on 04 Nov, 2014Perv. GC meeting held on 27 Jun, 2014Principal is member secretary Yes

9Academic Advisory Body Yes

10Organizational chart

Yes

11

Student feedback mechanism on Institutional Governance/ faculty performance

Existing

12Grievance redressal mechanism for faculty, staff and students Yes

13Name of the Department

AERONAUTICAL ENGINEERING

Course BE

3

Level UG1st Year ofapproval by the Council YesYear wise Sanctioned Intake

2014-15: 60 2013-14: 60 2012-13: 60 2011-12: 60

Year wise Actual AdmissionCAY : 49 CAY-1 : 53 CAY-2 : 50 CAY-3 : 24

Cut off marks – General quota 45%% Student passed with Distinction 2013 – 2014 : 65% 2012-13: 27% 2011-12:10%% Student passed with First Class 2013 – 2014 : 44% 2012-13: 42% 2011-12: 22%Students opted for Higher Studies

2013-14 : 04

Accreditation statusOf the Course

Accreditation in progress

Doctoral course NoProfession Society Membership Yes

Professional Activities

Starting of Student Chapter of1. Aeronautical Society of India2. Aerospace society of India3. Institution of Engineers (India)

DepartmentAchievements

List Of Patent Held By Faculty

Prashant Manvi “Method, System and Apparatus for an Efficient Floor Panel Material for Aircraft” Om Sai Patent Services National Application No.463/CHE/2014 Submitted 2014

Awards By Faculty

Best Teaching awards –Prof Elangovan By Staffordshire University UK

Awards By Student

1. Tabrez, Pavan of 6th sem AE & Vignesh of 4th sem AE participated in the Boeing- National Aero- Modelling Competition to be held at IIT Kharagpur. Obtained 3rd

Position, selected to participate in Competition to be held at Delhi in the month of April 2014

2. Tabrez, Pavan, Faraz of 6th sem AE & Vignesh, Harish of 4th sem AE participated in the Aeromodelling, College of engineering Pune. Obtained 4th Position

3. Faraz, Jafar, Saleem, Rohit & Manjunath HK of 6th

4

DepartmentAchievements

sem AE participated in the Aeromodelling build and fly, held at Acharya College of Engineering, Bangalore. Obtained 1st Position

4. Tabrez, Pavan of 6th sem AE & Vignesh of 4th sem AE participated in the IC engine aeromodelling Competition Held at IIT Kanpur Obtained 4th Position

5. Faraz, Saleem & Rohit of 6th sem AE participated in the Aeromodelling build and fly, held at Nitte Menakshi Institute Of Technology Obtained 1st Position

Seminar conducted:1. Advances in Aerospace Propulsion and Carrier Options

for Aeronautical Engineering Students” by Dr. R.Venkataram, Director, East Point Research Academy, Bangalore.

2. “March to Mars” guest lecture by Prof. R. R. Elangovan.3. A technical talk on “Significance of Bearing technique

in Aerospace Technolgy” by Dr. V. Arun Kumar, Professor, Mechanical Department, Dr. Ambetkar Institute of Technology

Industrial Visit: Yes (HAL, Bangalore)

Orientation/Training program conducted to students:

“Advances in Aerospace Propulsion and Carrier Options for Aeronautical Engineering Students” by Dr. R.Venkataram, Director, East Point Research Academy, Bangalore.

Membership – Universities Committees : Prof R.R. Elangovan

1. Associated with AERO PARK formation by TIDCO Govt of Tamil Nadu

2. Chairman Aero board Anna university 2012-2013,14 Anna University

3. Vice Chairman Aero board 2011-2012 Periyar Maniyammai Thanjayur

4. Academic Committee member Board of Studies Periyar Maniammai University, tanjore

5. Member Academic Council Eritrea Institute of Technology

6. Member Global Vsat Forum ,U.K7. Implementation experience of Satellite connectivity

projects in UAE,AFRICA,JORDAN ,IRAQ countries8. Implementation of E-Learning methodologies through

Software to organize the educational institutional

5

DepartmentAchievements

activities from student registration to exam results through course development and student counseling in higher college of technologies of Oman and India

RESEARCH ACTIVITIES AND PUBLICATIONS:

PROF R.R. ELANGOVAN

All the publications are classified under Restricted category by Ministry of Defense, India and following are the list of the topics covered in articles Published as Internal Reports and in Aeronautical Society of India & Astronautically society of India and the following are the areas of Reports1. Stability analysis of controlled launch vehicles in

atmospheric flight 2. Vibration analysis of launch vehicle structures using FEM

packages 3. Development of general purpose FEM package (FEAST,

Finite element analysis Of Structures )for the Vikram Sarabhai space Centre (VSSC), India

4. Mathematical simulation of Liquid propellant in dynamically moving liquid propellant tanks of satellite launch vehicles like PSLV and GSLV

5. Matrix methods of analysis of structures for the free vibration analysis of satellite launch vehicles

6. Computation methods for the simulation of Mass matrix and stiffness matrix of Complete launch vehicles structure

7. Mathematical analysis of joints in the launch vehicle structure and their effect on Frequencies and mode shapes of launch vehicles with liquid propellant tanks

8. Response analysis of structures to the external forces by modifying the equation of motions of launch vehicles

9. Aero elastic testing and analysis of Satellite launch Vehicles through Wind tunnel Testing

International Published :05

Mrs. JAMUNA A. B.

1. Jamuna A. B. CFD Simulation and Experimental verification of Air Flow through Heated Pipe IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE) 2013

2. Jamuna A. B. Numerical Analysis of Solar Flat Plate Collector for Circular Pipe Configuration by using CFD International Journal of Engineering Research & Technology (IJERT) 2013

3. Jamuna A. B. Vibration Signature Analysis of IC Engine international Journal of Innovative Research & Development 2013

6

4. Jamuna A. B. CFD Simulation and Experimental Verification of Air Flow through Heated Pipe World Academy of Science, Engineering and Technology 2014

5. Jamuna A. B. Numerical Analysis of Solar Flat Plate Collector for Corrugated Plate Configuration by using CFD Scientific & Academic Publishing 2014

Distinguished Alumni Harish.K.P (2013-2014)

14Name of the Department

BIOMEDICAL ENGINEERING

Course BE

Level UG1stYear of approval by the Council YesYear wise Sanctioned Intake 2014-15: 60 2013-14 :60 2012-13:60 2011-12: 60Year wise Actual Admission

CAY : 40 CAY-1 : 24 CAY-2:14 CAY-3 :2Cutoff marks–Generalquota

45%

%Student passed with Distinction 2013-2014: 72%%Student passed with First-class 2013-2014: 28%Students Placed 2013-2014:

1. MsSandhya placed in HP, Bangalore 2. MsSowmyaplaced in Apollo Hospital Biomedical

Engineer , Bangalore 3. Mr Abdul Waseem placed in Lenovo, Bangalore

Students Opted for Higher Studies

2013-2014 :

1. MsRohiniPersuingMasters Degree in Tissue Engineering ,Texas University

2. MsJesia Mathew PersuingMastersDegree in MSRIT,Bangalore

7

DepartmentAchievements

Seminars Conducted:

One day Seminar on “BIOMEDICAL EQUIPMENTS” by MrVijayanand Shetty on 18th Sep 2013, HOD BME , RajaRajeshwari Medical College and Hospital

Industrial Visits :

One day visit to L & T medical Equipment Production unit at Mysore on 19th Aug 2013

Orientation /Training Program conducted to Students:

Three Months Internship Training Program conducted during 10/02/2014 – 10/05/2014 at RajaRajeshwari Medical College and Hospital

Faculty Deputed for Conference/Workshop:

Three days seminar/Workshop on Clinical Engineering from 01/03/2013 to 03/03/2013 at TKMIT, Kerala

Research Publications :

Mr MuniKrishna

1. MuniKrishna:2nd international conference on simulation Modeling and analysis-COSMA 2011.at Amrita school ofEngineering Coimbatore.

2. MuniKrishna : Presented a paper in “Computational Control Systems and OptimizationSignal Processing “ Department of Instrumentation Technology in 2011 at DrAmbedkar Institute of Technology , Bangalore

SurekhaNigudgi

1. SurekhaNigudgi: Presented a Paper in “ Latest Trends in Nanoscience and Nanotechnology” Department of Biomedical Engineering in 2011 at KBN College of Engineering ,Gulbarga

2. MrsSurekhaNigudgi: Presented a paper in“VLSI andCommunication Systems” , Department of Instrumentation Technology , at Bangalore Institute of Technology ,Bangalore

8

DepartmentAchievements

Nanditha Krishna

1. Nanditha Krishna : Presented a paper in “Emerging Trendsin Biomedical Signal Processing“, Department of IT and PG Studies in 2011 at R.V .College of Engineering , Bangalore

2. Nanditha Krishna : Presented a paper in “Computational Control Systems and OptimizationSignal Processing “Department of Instrumentation Technology in 2011 atDrAmbedkar Institute of Technology , Bangalore

MsPrathibha.T.P

1. MsPrathibha.T.P : Presented a paper on “ Fuzzy logic system for Classification of Lung Nodule in digital images in Computer Aided Detection” Department of Computer Science Engineering , at Sri Siddhartha Institute of Technology , Tumkur

15Name of the Department COMPUTER SCIENCE AND ENGINEERING

Course BE

Level UG1st Year of approval by the Council YesYear wise Sanctioned Intake

2014-15 : 60 2013-14:60 2012-13: 60 2011-2012:60Year wise Actual Admission

CAY: 40 CAY-1 :45 CAY-2 : 29 CAY-3 : 21 Cut off marks – General quota 45%% Student passed withDistinction CAY: 40% CAY-1 :24% CAY-2 : 4% CAY-3 : 38%% Student passed withFirst Class CAY: 40% CAY-1 :24% CAY-2 : 21% CAY-3 : 52%Accreditation Status of the course Under ProgressPG Courses Yes. M.Tech (Software Engineering)Doctoral Courses

YesProfessional activities

To be conductedProfession Society Membership LMISTE

9

Professional ActivitiesStarting of Student Chapter of1.CODE (Computer Organization Developing Engineer)2.ACM

DepartmentAchievements

GUEST LECTURER ORGANIZED :

1. Mr.K.Ravindra, Developers & Directors of Ekalavya Universys, presented a topic on Skills and Tips in Programming Domanin dated on 14-8-2013.

2. Dr.Nadi Dharam, KIshore (rsearch Scientist II), and Presented a potic on Cyber Crime and Malwares dated on 21-8-2013.

3. Mr.Venkat Reddy PS, Senior Member in Eduction, presented a topic on Object Thinking and Programming dated on 31-08-2013.

4. MrSrinidhi Srinicas, Vice President, Digital Forensic Services and Training, presented topic on Cyber Crime and Ethical Hacking dated on 25-09-2013.

5. Mr Arafath Aboobacker , NIIT presented a topic on “Building mobile applications using Android frame work”

6. Mr Prashanth Nambiar Senior software engineer , SPAN Infotech Pvt. Ltd presented a topic on “Indian IT Industry and Technology”.

W O R K SH O P S :

1. Mr.Ragavendra, Managing Director, of Kaiten Solutions conducted one day workshop on Android Development at CSE Departemnt dated on 1-10-2013.

2. Mr. Sridhar R and Mr Kiran from “#DEFINE” conducted two days workshop on Web design Training at CSE department dated on 28-04-2014 and 29-04-2014.

3. Mr Karthik of Data Grid Technology conducted NSDC Program at CSE department from 07-04-2014 to 11-04-2014

C O N F ER NC E:

1. One Day National Conference “Signal Processing, Computing and Networks”, organized by CSE & ECE department will be Held on 31st march 2015.Faculty Deputed for Conference/Workshop

1. M.SELVI attended Faculty Development Program on innovative Teaching Practices at RajaRajeswari Engineering College.

2. M.SELVI attended Workshops on “Wireless Sensor Networks” at MSRIT.

3. M.SELVI attended “Programming in C and Data Structures” Two days FDP program in RNSIT

10

DepartmentAchievements

RESEARCH PUBLICATIONS

Dr T.SENTHIL KUMARANInternational Journal :071. T.Senthil Kumaran , S.Syed Abdul Syed Sarfaraz Ahmed

A “An Energy Efficiency Distributed Routing Algorithm Based on HAC Clustering Method for WSNs”, Indian Journal of Science Technology.

2. T. Senthil Kumaran , Sarfaraz Ahmed A, S.Syed Abdul Syed “Cross Layer Design Approach for Power Control in Manet”, Egyptian Informatics Journal, 16 (1) (2014), Article in Press (Elsevier Publication impact factor : 0.857 ).

3. T. Senthil Kumaran V. Sankaranarayanan,"Congestion Free Routing in Adhoc Networks" Journal of Computer Science, and Volume: 8; Issue: 6; pp 971 - 981; 2012 (SNIP: 0.874, Cited by 12 journals).

4. T.Senthilkumaran. and Sankaranarayanan V. (2013), ‘Dynamic congestion detection and control routing in ad hoc networks’, Journal of King Saud University-Computer and Information Sciences(Elsevier publication), Vol. 25, Issue 1 , pp. 25 – 34. (Cited by 7 journals)

5. T. Senthilkumaran, V. Sankaranarayanan, “Early congestion detection and optimal control routing in MANET” European Journal of Scientific Research, 63 (1) (2011), pp. 15– 31. (SNIP : 0.769 Cited by 5 journals)

6. T. Senthilkumaran, V. Sankaranarayanan,” Early congestion detection and adaptive routing in MANET”, Egyptian Informatics Journal, 12 (3) (2011), pp. 165–175 (Elsevier Publication impact factor : 0.857 Cited by 12 journals)

7. T. Senthilkumaran, G Sivapriya,” Smart Route Discovery in MANET using Ordered Walk”, International Journal of Computer Applications, 70(4),pp.36-41.

International Conferences: 03

1. Senthilkumaran, T., Subburam, S., 2007. Reducing Control Packets in AODV-Based Routing in Adhoc Networks, International Conference on Trendz in Information Sciences and Computing (TISC 2007).

2. Senthilkumaran, T., Sankaranarayanan, V., 2010. Early detection congestion and control outing in MANET, In: Proceedings of the Seventh IEEE and IFIP International Conference on Wireless and Optical Communications Networks (WOCN 2010), Srilanka, pp. 1–5. (Cited by 10

11

DepartmentAchievements

journals)3. Senthilkumaran, T., Sankaranarayanan, V., 2011. Early

detection congestion and self cure routing in MANET. In: Proceedings of Springer Communications in Computer and Information Science (CCIS), vol. 142 (3), Bangalore, India, pp. 562–567(SJR: 0.14).

Mrs.M.SELVIJournals:011. M.Selvi “Design & Developing a Multicast routing

Protocol for Link Failure & Reliable Data Delivery, International Journal ISSN:2278-0661 IOSR-JCE VOL 16 ISSUE VERSION VI Feb.2014 PP 06-10.

International Conferences:011. M.Selvi, “A Method to Secure Communication in Mobile

AdHoc Networks(MANET’s)”,Rajarajeswari engineering college,13th April 2012.

Conferences:062. M.Selvi, “AdHoc on demand Distance vector Routing is a

widely adopted network routing protocol for MANET”, proceedings of the national conference on recent trends in computing 27th March 2010.

3. M.Selvi, “The development of data centric sensor networks based on privacy and security” proceedings of the national conference on advanced computing and networks 2nd February 2010 PP 16-26,ISBN No:978-81-904760-2-7.

4. M.Selvi, “Topology control based power aware and battery life aware dynamic source routing”, proceedings of the national conference on communication department 4th

February 2010.

5. M.Selvi, “The single copy case based on mobile networks using clustering algorithm”, proceedings of the national conference on signal processing communications and VLSI design, Anna University Coimbatore, 8th and 9th

May 2009 PP 134, paper ID:MC-132.6. M.Selvi, “Supply Chain Mangement”, proceedings of the

national conference on Emerging dimensions of human resource and marketing practices, Sree Sastha Institute of Engineering and Technology 26th March 2009.

7. M.Selvi, “Bad Ad Hoc On-demand Distance Vector Routing suffering black hole attack ”,Rajarajeswari engineering college,24th August 2012 PP 18-24

Mrs.JYOTHI METANInternational Journals:01

12

DepartmentAchievements

1. “Moving VANET to vehicluar cloud” international journal of innovative research in computer and communication engineering. www.ijircce.com ISSN(print): 2320-9798 ISSN(online):2320-9801

National Conference:011. “PKI Approach to Enhance the Security in RFID based

Authentication System in E-Passport”, East West Institute of Technology, 2nd May 2011

National Workshop:011. Program Education Objectives(PEO) and Outcomes

organized by ISTE Chapter, East West Institute of Technology in collaboration with Sunrise Technical Education Promotional Society(STEPS) New Delhi on 5th

May 2011Mr.KRISHNAKUMAR ANational Conference:011. “Efficient Grid Resource allocation and classification

using Regression” in “PSG-ACM” National conference in Intelligent Computing at Apr’2013.

MRS.MAREESHWARIInternational Journals:021. V.Mareeswari “Encrypted Receipt with Session

Management In Multihop wireless Network for Secure Payment” International Journal of Engineering Research and Technology (IJERT) ISSN-NO: 2278-0181, Vol-2-ISSUE 11 Nov 2013.

2. V.Mareeswari “Improving Identity Crime Detection using Scheduling for Fast Response Multi-Pattern Matching over Streaming Events” International Journal of Advanced Research in Computer Science Engineering and Information Technology ISSN-NO: 2321-3337, Vol-3-ISSUE 1 Jun 2014.

International Conference:021. V.Mareeswari, E.Kodhai,Saranya.M, “A Secure

Distributed Online Certification Authority And Decentralized Peer To Peer Systems “International Conference on Systems, Methodologies, Automation and Research Trends (SMART ’12) Dec 12 – 14, 2012 SMVEC, Puducherry, India.

2. V.Mareeswari, B.Dhinesh Kumar, K.G.Surendar “Advanced Student Tracking System “International Conference on Computing and Control Engineering

13

(ICCCE 2012), 12 & 13 April, 2012.Distinguished Alumni R. Mohan (2012-13) , Shashi Prasad (2013-2014)

16Name of the Department

ELECTRONICS AND COMMUNICATION ENGINEERING

Course BE

Level UG1st Year of approval by the Council YesYear wise Sanctioned Intake 2014-15 : 60 2013-14:60 2012-13: 60 2011-2012:60Year wise Actual Admission

CAY:44 CAY-1 :56 CAY-2 : 26 CAY-3 : 36 Cut off marks – General quota 45%% Student passed withDistinction CAY:40% CAY-1:21%% Student passed withFirst Class CAY:04% CAY-1 :10% Accreditation Status of the course Under ProgressStudents opted for Higher Studies

Profession Society Membership LMISTE, FIETE, IEEE, IACSIT,VSI,ELSEVIERProfessional Activities YesPG Program Yes, M.tech (Digital Electronics and Communications

Systems)Doctoral Courses

NO

Seminar Conducted:

1. Seminar on VLSI Technology2. Seminar on Big Data & Hadoop By Mr.Sangamesh

(British Telecom Bangalore)Workshops Conducted:

Workshop an ARM Processor by Embience technologies Bangalore on 07-08-2014.

Industrial Visits:Industrial Visit Organized to ISRO

Research Publications

Mr.A.M.PRASANNA KUMAR

1. A.M.Prasanna Kumar ,S.M.Vijaya,”A Multiple Searching Genetic K-Means Algorithm for Circular Invarient Clustering

14

Department Activities

“Proceedings of International Conference on Communication,Computation & Nanotechnology (ICN-2011), September 23-25, 2011.2. A M Prasanna kumar, Performance Analysis of Adaptive DOA Estimation Algorithms for Mobile Applications , Signals & Systems and Networking in Electrical Engineering 258, DOI: 10.1007/978-81-322-1524-0_49, Springer India 2013

Dr.A MURGANANDHAM

International Journals:101. Muruganandham.A, International journal of Applied

Engineering Research(IJAER) SPIHT classification based fast fractal image coder Vol 5, Number 7/ January 2010/page1243-1250

2. Muruganandham.A and Dr. R.S.D.Wahida Banu “Effective MSE optimization in fractal image compression” International Journal of Computer Science and Information Security, (IJCSIS) Vol. 2, No.2, May 2010.Page No 238-243.ISSN: 1947-5500 IMPACT FACTOR: 0.432

3. Muruganandham.A, R. S. D. Wahidabanu “Effective Hashing Parameters based Fast Fractal Image Coder” WASET 2010 January 29-31, 2010, Cape Town, South Africa (ICECE, 10), PP. 497-503. (Scopus Index)

4. Muruganandham.A, R. S. D. Wahidabanu Elsevier ( Procedia Computer Science) Adaptive Fractal Image Compression using PSO, Page Number 338- 344 /March- 2010 (Scopus Index)

5. R. Mukesh, Dr. K . Lingadurai and A. Muruganandham, Article: “Application of PARSEC Geometry Representation to General Airfoilfor Aerodynamic Optimization”. Lecture Notes in Information Technology ,Vol 10 ; pg: 31-37: Feb 2012

6. Muruganandham.A, S. Karthick and Dr. R.S.D. Wahida Banu.,” A Fast Fractal-Curve let Image Coder”. International Journal of Computer Applications 35(12):25-29, December 2011. Published by Foundation of Computer Science, New York, USA. BibTeX Impact Factor : 0.821

7. Muruganandham.A , Prakash R. ,”Design and Implementation of Fuzzy Logic based Intelligent Adaptive Speed Control for DC Motor” Australian Journal of Basic and Applied Sciences(AJBAS) ISSN 1991-8178 JAN 2014. Impact Factor : 0.658

15

Department Activities 8. Muruganandham.A , Prakash R., “A NOVEL MODEL REFERENCE INTELLIGENT ADAPTIVE CONTROL USING NEURAL NETWORK AND FUZZY LOGIC CONTROLLER” Journal of Theoretical and Applied Information Technology (E-ISSN 1817-3195 / ISSN 1992-8645). 10 April 2014 - Vol. 62. No. 1 - 2014 (Scopus Index)

9. Muruganandham.A , S.P.Arya , DESIGN AND IMPLEMENTATION OF EC BASED CRYPTOSYSTEM ON FPGA, IJAICT Volume 1, Issue 2, June 2014 Doi:01.0401/ijaict.2014.02.11 Published Online 05 (06) 2014

10. Muruganandham.A , Greeshma Vijayan , “Design and Implementation of Stream Cipher Key Exchange in FPGA” International Journal of Engineering Research and Technology (E-ISSN 2278-0181) Volume. 3, Issue. 05 , May – 2014

Conferences :7

1. Muruganandham.A, M. Chandra sekar, A Paper published in NCCN 2003 named as Traffic control engineering at SRM Engineering College

2. Muruganandham.A R. Mukesh, A Paper published in National Conf. On Emerging Trends in CSE And Engg.(ETICSE-06)as Coherent Radar Imaging At KSR college of Technology

3. V.Vanthe and A. Muruganandham, “Multire solution Approach to Enhance and Denoising MR Images”, Fifth National Conference on Recent Trends in information and Communication Technology held during 02-03 April 2012. at Bannari Amman Institute of Technology, Sathiyamangalam-401.

4. Ramya Shanmathi .K and A. Muruganandham , “Compression of Encrypted Gray scale Images using RPC Scheme”, National Conference on Emerging Trends and Development in information Communication VLSI Design and Embedded Systems held on 21st & 22nd March 2012 at Adhiyamaan College of Engineering, Hosur -109.

5. N. Deivamalar and A. Muruganandham, “Removal of Impulse noise from color image sequences”, National Conference on Emerging Trends and Development in information Communication VLSI Design and Embedded Systems held on 21st & 22nd March 2012 at Adhiyamaan College of Engineering, Hosur - 109.

16

Department Activities

6. Priyadarshini and A. Muruganandham, “An Optimization Using FFT Based Fractal Image Compression”, National Conference on “Cutting Edge Technology in power Conversion and Industrial Drives” PCID -2011 held during 16-17 March 2011 at Bannari Amman Institute of Technology, Sathiyamangalam -401.

7. S. Hema Deepalaklshmi and A. Muruganandham, “A Fast Hyper Spectral Image Compression”, National Conference on “Cutting Edge Technology in power Conversion and Industrial Drives” PCID -2011 held during 16-17 March 2011 at Bannari Amman Institute of Technology, Sathiyamangalam -401.

Mrs.KAVITHA R.J

1. R J.Kavitha,et al.”Desighn & Implementation of sub- system of UQPSK using micro strip lines”National conference on broadband communication systems,Vishwakarma Institute of Technology, Pune-411048,Maharashtra,September 2006,pp 10-15.

2. R.J & Shivaprakasha ri T.G,”8-8.4GHz hybrid &Power antennas &National conference on Antennas & its application, VTU Reginal office, Banglore-91 February 2012.

Distinguished Alumni Amulya, Pradeep

17 Name of the DepartmentELECTRICAL AND ELECTRONICS ENGINEERING

Course BE

Level UG1st Year of approval by the Council YesYear wise Sanctioned Intake

2014-15 : 60 2013-14:60 2012-13: 60 2011-2012:60Year wise Actual Admission

CAY:14 CAY-1 :11 CAY-2 : 15 CAY-3 : 06 Cut off marks – General quota 45%% Student passed with Distinction

2013-14 :10%

% Student passed with First Class

2013-2014: 28% 2012-2013 :28%

Accreditation Status of the course

Accreditation in process

Students opted for Higher Studies

Students are in Final Year

17

PG Courses NODoctoral Courses NO

18Name of the Department

CIVIL ENGINEERING

Course BE

Level UG

1st Year of approval by the Council Yes

Year wise Sanctioned Intake 2014-15 : 60 2013-14:60 2012-13: 60 2011-2012:60Year wise Actual Admission CAY : 48 CAY-1 : 50 CAY-2 :28 CAY-3 : 07Cut off marks – General quota

45%% Student passed withDistinction

2013-14: 37.20% 2012-13: 74.41%

% Student passed withFirst Class

2013-14: 48.84% 2012-13: 6.97%

Student Placed 2013-14: 40 2012-13: 35

Average Paypackage, Rs./Year

2013-14: 2 lakhs/annum 2012-13: 2 lakhs/annum

Students opted for HigherStudies

11 students

Year of Passing2011-2012 :8 2012-2013:3

Accreditation Status of the course Applied for AccreditationDoctoral Courses NoForeign Collaboration, if any NoProfessional SocietyMembership MISTE,ICA

Professional activities C.O.R.E

Consultancy activities No

Grants fetchedNo

Orientation/Training Program conducted to Students:

1. Orientation programme on Extensive Survey to III year Civil Students Conducted on 07.01.2012.

2. Orientation programme on Total Station Survey for Civil Students Conducted on 08.08.2013.

RESEARCH PUBLICATIONS :

DR.RAVIKUMAR.B.N

18

Department Achievements

1. Dr. Md. Shafiquzzaman, Dr. Abdelkader T Ahmed, Dr. Mohammad S Azam, Dr. Brahim Askri , Haydar F Hassan, Dr. Ravikumar BN, Dr. Testuji Okuda, Identification and Characterization of Dissolved Organic Matter Sources in Kushiro River Impacted by Wetland. Ecological Engineering,2014, pp.459-464.

2. Ravikumar.B.N., Dr. N.S. Sathisha, and Dr. E.T. Puttaiah, Key Indicators Analysis for Visitor’s Accommodation Facility Satisfaction in Ecotourism Destination- a case study in the hilly region of Chikmagalur. Environment Ecology 2011, 29(3), 1094-8

3. Ravikumar B.N., B. Chandrashekar, Low- Cost Sewer Pipes using Stabilised Soil, National Seminar on Research and Development in Low-Cost Building Material and Building technologies(NSLBMBT-1989), Aug 31st – Sept.1st 1989, J.N.T.U.College of Engineering, Anantapur,Andrapradesh, India.

4. Ravi kumar, B.N. Dr. N.S. Sathisha, and Dr. E.T. Puttaiah, Economic Impact of Eco-tourism in the Hilly Areas of Chikmagalur District, National Symposium on Environmental safety and Management (NSESM – 2009),March 7, 2009, Vidyavardhaka College of Engg.., Mysore,Karnataka, India, pp.24-34.

5. Ravi kumar, B.N. Dr. N.S.Sathisha, and Dr. E.T. Puttaiah, Visitors Satisfaction in Eco-tourism Destinations – A case study in the western ghats area of Chikmagalur district, National Symposium on Environmental safety and Management (NSESM– 2009),March 7, 2009, Vidyavardhaka College of Engg., Mysore, Karnataka, India, pp.35-44.

6. Dr. N.S. Sathisha, Ravi kumar, B.N. and Dr. E.T. Puttaiah, Proposed Biogas Generation from Food Waste of A.I.T. Campus, National Symposium on Environmental safety and Management (NSESM – 2009),March 7, 2009, Vidyavardhaka College of Engg.., Mysore, Karnataka, India, pp.14 -17.

7. Dr. N.S. Satisha, Ravi Kumar, B.N. and Dr. E.T. Puttaiah, Treatment of Secondary Coffee Effluent using Fountain Aerator, National Symposium on Environmental safety and Management (NSESM – 2009),March 7, 2009, Vidyavardhaka College of Engg.., Mysore, Karnataka, India, pp.2434.

8. Shiju Easo John, Ravi kumar, B.N. and Dr.C. Nanjunda Swamy, Solid Waste Management Practices in Chikmagalur City, National Symposium on Environmental safety and Management (NSESM –

19

Department Achievements

2009),March 7, 2009, Vidyavardhaka College of Engg.., Mysore,Karnataka, India, pp.2434

MRS. REENA K

1. Experimental Studies on M20 SCC – by Mrs. Reena K International Journal of Advanced Technology in Engineering and Science – ISSN: 2348-7550.

2. Fly ash as partial replacement for cement in SCC – A case study on Compressive, Tensile and Flexural Strength - by Mrs. Reena K International Journal of Advanced Technology in Engineering and Science – ISSN: 2348-7550.

3. Effect of size and volume of coarse aggregate on the properties of self Compacting Concrete - by Mrs. Reena K International Journal of Advanced Technology in Engineering and Science – ISSN: 2320-8791.

Mr. SHASHI KIRAN

1. “Applications of Green Technology – A Case study” by Mr. Shashi Kiran C R Paper Presented for international conference at ICCSEM conducted by Dayanad Sagar College of Engineering, Bangalore.

2. Studies on Noise Pollutuion Monitoring and prelimimnary carbon credit evaluation – A Case Study by Mr. Shashi Kiran C R Paper Presented for National conference at WMPC. Conducted by KLE, Dr. M.S Sheshagiri College of Engineering & Technology, Belgaum.

Mr. VENKATESH R

1. Congestion Delays near Mantri Mall – A Case Study Paper presented by Mr. Venkatesh R for National Conference conducted by IISC in Transport Research Group (TRG), Bangalore.

Mrs. MANJULA V.

1.“Development of Economic & Standard SCC using Industrial Waste

DistinguishedAlumni

1. Mr. Arun K – M.Tech in Highway Technology at RASTA, Center for Road Technology.2. Mr. Gokul G – M.Tech in Structural Engineering at SRM University Kattankulathur, Kancheepuram Dist.3. Mr. Shashank R – M.Tech in Structural Engineering at SRM University Kattankulathur, Kancheepuram Dist.

20

4. Mr. Harshith M – M.Tech in Infrastructure Management at RASTA, Center for Road Technology.5. Mr. Kiran Kumar D P – M.Tech in Highway Technology at RASTA, Center for Road Technology.6. Mr. Ganesh S – Master of Design at IIIT, Jabalpur, U.P.

7. Ms. Shruthi S Kannur – M.Tech in Environmental Engineering at KLE, Dr. M.S Sheshagiri College of Engineering & Technology, Belgaum.

8. Ms. Sharanya K B working as Trainee Engineer, Water Resources Dept. at EI Technologies, Jayanagar, Bangalore.9. Ms. Thejaswini M – M.Tech in Structural Engineering at East West Institute of Technology, Bangalore.10. Ms. Shwetha B – Working as Architect Engineer at Studio312 Architects, Banshankari 3rd

Stage Bangalore.

19Name of the Department

MECHANICAL ENGINEERING

Course B.E

Level UG1st Year ofapproval by the Council YesYear wise Sanctioned Intake 2014-15 : 60 2013-14:60 2012-13: 60 2011-2012:60

Year wise Actual AdmissionCAY :55 CAY-1 :45 CAY-2 :62 CAY-3 :54

Cut off marks – General quota45%

% Student passed withDistinction

2013-14: 15% 2012-13: 10% 2011-2012:10%

% Student passed with First Class 2013-14: 35% 2012-13: 18% 2011-2012: 30%

Students opted for HigherStudies 16 students

Year of Passing 2009-2010 :09 2010-2011:07

Accreditation Status of the courseAccreditation in Progress

PG Program M.Tech (Product Design and Manufacturing)

Doctoral CoursesYes

Foreign Collaboration, if anyIn Process with Deleware University,USA

21

Professional Society Membership

Indian Society for Technical Education, Solar Energy Society of India, Institution of Engineer(India),Indian Science Congress Association,

Professional activitiesStarting student chapter

1. Solar Energy Society of India, 2. Institution of Engineer(India) ,3. Indian Society for Technical Education.

Grants fetched0.25 Laks from Karnataka State Council for Science and Technology

Department Activities

Seminar Conducted:One Day Seminar on “Application of CFD in Engineering” by Krishna (IISc, Bangalore)

Industrial VisitToyota Motors Private Limited

Faculty Deputed for Conference/ WorkshopSunil Raj B. A1. TQM & its Perspectives – JSSATE2. Automation & FMS – SAJBIT3. Recent Trends in Indian Management Practice – MSRITMr. Veeresh Bhusnur Attended QIP Short term course on Blast Furnace at IIT Bombay during 8th -13th December 2014.Dr. M. Eswaramoorthy

Attended QIP short term course on Advances in Solar Energy Technologies at IIT Delhi during 9th-15th December 2014.RESEARCH PUBLICATIONS: Dr. M. ESWARAMOORTHY

1. M. Eswaramoorthy , S. Shanmugam AR. Veerappan (2014) “ Modeling and analysis of solar parabolic dish thermoelectric generator” Energy Sources Part A : Recovery, Utilization and Environmental Effects (Accepted) 36(14),pp:1531-1539.

2. S. Shanmugam, AR. Veerappan and M. Eswaramoorthy (2014) ‘Experimental evaluation of energy and exergy efficiency of solar parabolic dish thermoelectric power generator’ Energy Sources Part A : Recovery, Utilization and Environmental Effects 36(17) pp: 1865-1870*

3. K. Sampathkumar, T. V. Arjunan, M. Eswaramoorthy and K. Senthilkumar (2013) “Experimental investigation of solar still coupled with evacuated tube collector ” Energy Sources Part A : Recovery, Utilization and Environmental

22

Department Activities

Department Activities

Effects Volume 35, Issue 15, pp. 1441-1455 (Impactfactor:1.09) *

4. M. Eswaramoorthy and S. Shanmugam (2013) “ Solar parabolic dish thermoelectric generator: a technical study” Energy Sources Part A : Recovery, Utilization and Environmental Effects Volume 35, Issue 5, pp 487-494.

5. S. Lokeswaran and M. Eswaramoorthy (2013) “Experimental studies on solar drier system with bio-mass backup heater” Energy Sources Part A : Recovery, Utilization and Environmental Effects, Volume 35, Issue 5, pp 467-475.

6. S. Lokeswaran and M. Eswaramoorthy (2012) ‘Experimental evaluation of solar parabolic dish cooker with porous medium’ Applied Solar Energy, Volume 48, Issue 3, pp 169-174.

7. M. Eswaramoorthy and S. Shanmugam (2012) “Thermal performance of a low cost solar parabolic dish collector for process heat” Energy Sources Part A : Recovery, Utilization and Environmental impacts Volume. 34 issue 18, pp. 1731-1736. (Impact factor:1.09)*

8. M. Eswaramoorthy and S. Shanmugam (2012) “Numerical model to estimate heat loss in focal receiver of solar parabolic dish thermoelectric generator” Energy Sources Part A: Recovery, Utilization and Environmental impacts. Vol.34 Issue.10, pp.959-965.(Impact factor:1.09)*

9. K. R. Dhurai K. Ramalingam R. Velavan and M. Eswaramoorthy (2012) ‘An Experimental study on Biomass Gasifier for Burner System’ International Journal of Energy Engineering , Vol.2, No.2, pp.37-40.

10. Shivalingaiah. K and M. Eswaramoorthy (2011)”Analysis of Energy Efficient Panel Air Conditioner for CNC Machine Control Panel” International Journal Of Applied Engineering Research Vol.7, No.3, pp:233-243.

11. S. Lokeswaran and M. Eswaramoorthy (2011) ‘Heat transfer analysis of parabolic dish cooker: artificial neural networks approach’ Applied Solar Energy, Vol.47, Issue: 3; pp: 312-317.

12. S. Shanmugam, M. Eswaramoorthy and AR. Veerappan (2011) ‘Mathematical modeling of thermoelectric power generator driven by solar parabolic dish collector’ Applied Solar Energy,Vol.47; Issue:1; pp: 31-35.

13. M. Eswaramoorthy and S. Shanmugam (2010) “Thermodynamic analysis of Solar Parabolic Dish Thermoelectric Generator” International Journal of

23

Renewable Energy Technology, Vol.1, No.3, pp: 348-360.14. M. Eswaramoorthy, S. Shanmugam and AR.

Veerappan (2010) “ A review on application for thermoelectric power generation” International Journal of Integrated Energy System Vol.2,No.1.pp.69-76

15. M. Eswaramoorthy , S. Shanmugam and AR. Veerappan (2010) “ Feasibility analysis of solar parabolic dish thermoelectric power generator” International Journal of Integrated Energy System,Vol.2,No.1,pp:63-67.

16. M. Eswaramoorthy and S. Shanmugam (2009) “Techno-Economic Analysis of a standalone solar thermoelectric power generator for a rural residential house energy demand” International Journal of Applied Engineering Research, Vol.4, Issue.10, pp:1911-1919.

17. M. Eswaramoorthy ‘A comparative experimental study of flat and V grove receiver of solar air heater for drying applications’ Energy Sources Part A : Recovery, Utilization and Environmental Effects (Accepted) Manuscript ID: UESO-2011-0221.R4(Impact factor:1.09)

INTERNATIONAL CONFERENCES PROCEEDINGS (Total:08)

1. G. Rajasekar, M. Eswaramoorthy and SN Kulkarni (2014) “Advanced Thermal Energy Stroage Materials for Solar Still Applications” orally presented by the first author of the paper

2. Rajasekar and published in proceedings of International Conference on Mechanical Engineering: Emerging Trends and Sustainability was held at MANIT Bhopal, Madhya Pradesh during January 29th - 31st 2014.

3. M. Eswaramoorthy (2013) “Solar Cooker Integrated with Nano-Composite Phase Change Materials ” was accepted for oral presentation in International Conference on Solar Energy for Peace 2013 held at Istanbul-Turkey during August 17th -19th 2013.

4. M. Eswaramoorthy (2012) “A Study on Biomass Stove-Thermoelectric system with Latent heat effects” was orally presented and published in the proceedings of International Technical Symposium on Recent Advances on Energy System 2012 Hyderabad was held during December 19th – 20th 2012.

5. M. Eswaramoorthy and S. Shanmugam (2012) “ A Technical Study on Biomass gasification Stove – Thermoelectric generator” has been accepted for oral presentation and publication in the proceedings of Global

24

Department Activities Conference on Global Warming 2012, Turkey which was held on July 08-12, 2012.

6. S. Lokeswaran and M. Eswaramoorthy (2012) Heat Transfer analysis of solar parabolic dish cooker: an ANN approach was orally presented and published in the International Conference in Recent Trends in Recent Advances in Energy System organized by Department of Mechanical Engineering was held at Manipal Institute of Technology, Manipal during 05th-08th January 2012.(Awarded as BEST PAPER )

7. Shivalingaiah K and M. Eswaramoorthy (2012) Design and Analysis of Energy Efficient Panel Air Conditioner for CNC Machine Control Panel’ Presently orally by Shialingaiah K and published in the Proceedings of International Conference ICAMB 2012 Paper Code: 4089, pp.730-743 (Compact Disc), organized by VIT University, Vellore, India during 09th-11th January 2012.

8. M. Eswaramoorthy, S. Shanmugam and AR. Veerappan (2011) “Biomass Stove Thermoelectric Power Generator for Isolated Rural House in India” was accepted and not presented in the International Conference in Recent Trends in Renewable Energy System organized by Department of Mechanical Engineering was held at Hindustan Institute of Technology and Science, Chennai during 17th-18th March 2011.

9. M. Eswaramoorthy, S. Shanmugam and AR. Veerappan (2010) “An analytical equation to estimate heat loss in the focal receiver of solar thermoelectric power generator” was orally

Dr.B.R.RAJU

1. BR Raju, B Suresha, RP Swamy Tribo-performance of Silicon-di-oxide filled glass fabric reinforced Epoxy composites ARPN Journal of engineering and applied sciences 7 (4April), 2012

2. BR Raju, B Suresha, RP Swamy, KN Bharath The effect of silicon dioxide filler on the wear resistance of glass fabric reinforced epoxy composites polymer composites 18, 20, 2012

3. BR Raju, B Suresha, RP Swamy, BSG Kanthraju Assessment of Cutting Parameters Influencing on Thrust Force and Torque during Drilling Particulate Filled Glass Fabric Reinforced Epoxy Composites Journal of Minerals and Materials Characterization and Engineering 1, 101, 2013

4. BR Raju, BS Kanthraj, B Suresha, RP Swamy Three-Body

25

Department Activities

Department Activities

Abrasive Wear Behaviour of Silicon Carbide Filled Glass-Fabric Reinforced Epoxy Composites Using Taguchi Method 2013

5. BR Raju, Shankaraghatta, Some investigations on tribological behaviour and machining of fiber reinforced polymeric composites 2014

6. BR Raju, B Suresha, RP Swamy, BSG Kanthraju Investigations on Mechanical and Tribological Behaviour of Particulate Filled Glass Fabric Reinforced Epoxy Composites Scientific Research Publishing, 2013MR.GIRISHA.C

1. Girisha.C, Sanjeevamurthy Mechanical performance of natural fiber-reinforced epoxy-hybrid composites International Journal of Engineering Research and Applications 2 (5), 615-619, 2012

2. Girisha.C, Sanjeevamurthy Tensile properties of natural fiber reinforced epoxy hybrid composites International Journal of Modern Engineering Research 2 (3), 471-474, 2012.

3. Girisha.C, Sanjeevamurthy Sisal/Coconut Coir Natural Fibers – Epoxy Composites: Water Absorption and Mechanical Properties International Journal of Engineering and Innovative Technology 2 (3), 166-170, 2012.

4. Girisha.C, Sanjeevamurthy Effect of alkali treatment, fiber loading and hybridization on tensile properties of sisal fiber, banana empty fruit bunch fiber and bamboo fiber reinforced thermo-set composites ’International Journal Of Engineering Science & Advanced Technology.

5. Girisha.C, Sanjeevamurthy Analysis Of Tensile Properties For Hybrid Composites Reinforced With Biological Fiber National Conference in Evolving Techniques in Mechanical Engineering, [ETME-12], 2012

6. Girisha.C, Sanjeevamurthy, Rajendra Prasad Effect of surface treatment on interfacial strength in sisal fiber and polypropylene composite Recent Advance in Material Processing Technology [RAMPT-09]

MR.HS SIDDESHA

1. HS Siddesha, M Shantharaja Characterization of Mechanical Properties of Aluminum Processed by Repetitive Corrugation and Straightening Process using Taguchi Analysis JOM 65 (2), 294-298, 2013

2. HS Siddesha, M Shantharaja Optimization of Cyclic Constrained Groove Pressing Parameters for Tensile

26

Properties of Al6061/sic Metal Matrix Composites Procedia Materials Science 5, 1929-1936, 2014

3. HS Siddesha, M Shantharaja Thermal Stability Of Ultra-Fine Grained Al6061 Alloy Processed Through Cyclic Constrained Groove Pressing 2013

4. HS Siddesha, M Shantharaja Investigation of microstructure and mechanical properties of commercially pure aluminum produced by RCS process

5. HS Siddesha, M Shantharaja Study of Cyclic Constrained Groove Pressing Factors on Hardness Behavior of Al/Sic-MMC Subjected to Severe Plastic Deformation

MR.SIVA SUBRAMANIAN

1. Performance analysis on array of circular fins through forced convection” published in the International Journal of Engineering Research and technology, Volume 7, Number 1 (2014), pp 1-8.

2. “Performance Analysis and Heat Transfer studies on Protruding surfaces of electronic components” published in the International Journal Mechanical Engineering Research, Volume 4, Number 1 (2014), pp 9-19.

3. “Performance Analysis and Heat Transfer studies on Protruding surfaces of electronic components” presented paper in International Conference On Recent Advances In Mechanical Engineering And Interdisciplinary Developments (ICRAMID-2014) conducted by PONJESLY COLLEGE OF ENGINEERING, Nagercoil and accepted for IEEE X plore or Advanced Materials Research Journal.

4. “Performance analysis on array of circular fins through forced convection” Conducted by Engineering Design and Analysis Forum at MSRIT, Bangalore.

5. “A parametric study on a cooling configuration of an aero engine” Conducted by School of Mechanical sciences and Tecnische Universitat at Karunya Institute of Technology and sciences, Coimbatore.

6. Attended as resource person for two days work shop on Non Destructive Testing at JNN College of Engineering shimoga on 16.11.2007 and 17.11.2007

Distinguished AlumniNaveen Kumar (2013-2014)

20Admission Quota 60 in each branch

Entrance test/admission criteria Through CETCut off/last candidate admitted 119286

27

Fees in rupees Govt Quota: 38,500; Management Quota: 1.25 Lakhs.

Number of Fee Waivers offered NilAdmission Calendar June – August 2014PIO quota Yes/No

No21 Infrastructural information Available

Classroom/Tutorial Room facilities

Available

Laboratory detailsAvailable

ComputerCentre facilities

Available

Library facilities AvailableAuditorium/SeminarHalls/Amplifiers

Seminar Hall Available

CafeteriaAvailable

Indoor Sports facilities Under ProcessGymnasium facilities AvailableFacilities for disabled AvailableAny other facilities ---

22 Boys Hostel Available for 140 students

Girls Hostel Available for 60 studentsMedical &other Facilities at Hostel Available

23AcademicSessions

01-08-2014 to 08-01-2015

Examination system, Year/Sem SemesterPeriod ofdeclaration of results

1 Month

24Counseling/Mentoring Is being done

Career Counseling Is being doneMedical facilities AvailableStudent Insurance

Yes

25Students Activity Body

YesCultural activities

YesSports activities

YesLiterary activities

YesMagazine /Newsletter

AvailableTechnicalactivities/Tech Fest We are doing

28

Industrial Visits/ToursYes

Alumni activitiesAvailable

29