3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates:...

4
3M is a trademark of 3M Company, used under license in Canada. BAIR HUGGER, RANGER, and the BAIR HUGGER and RANGER logos are trademarks of Arizant Healthcare Inc., used under license in Canada. Please recycle. Printed in England. © 3M 2011. All rights reserved. Issued: 3/11 7829HB / 601477D 3M Ranger Blood/Fluid Warming System with Smartheat Technology Warming Unit – # 24500 Set point temperature: 41˚C Flow rates: KVO – 30,000 mL/hr Alarms: Over temperature primary setpoint = 43˚C Over temperature secondary setpoint = 46˚C Power: 110 VAC / 220-240 VAC Weight: 3.3 kg (7.4 lbs) Dimensions: 19w x 11h x 25d cm (7.5w x 4.5h x 10d in) Paediatric/Neonate Disposable Set* # 24400 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap with air aspiration port, 24 in. patient line Pressure Infusors – # 90083 Pressure: 300-350 mmHg maximum dynamic operating pressure Weight: 7.0 kg (15.5 lbs) Dimensions: 33w x 43h x 25d cm (13w × 17h × 10d in) Case quantity: 2 Infusors on mounting bracket Use with 500 to 1,000 mL solution containers For use with Power Pack(#90031 or # 90033), wall air or canned air, IV pole mountable Paediatric/Neonate Disposable Set* with Fluid Aspiration Port # 24450 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap with air aspiration port, fluid aspiration port, 24 in. patient line Power Pack – # 90031 Power: 220-240 VAC Pressure Setting: 300 - 350 mmHg Weight: 2.7 kg (6 lbs) Dimensions: 13w x 18h x 25d cm (5w x 7h x 10d in) Case Quantity: 1 each For use with: Pressure Infusor (# 90083) IV pole mountable Standard Flow Disposable Set* – # 24200 Flow rates: KVO – 9,000 mL/hr Priming volume: 39 mL Components: Heat exchanger, needleless injection port, bubble trap, 30 in. patient line Off-set IV pole and base – # 90068 / 90069 Height: Adjustable from 186-279 cm (73.5 to 110 in) Weight: 15.8 kg (35 lbs) Diameter: 71cm (28 in) Base, 5 wheels Units per box: 1 unit For use with: Pressure infusor (# 90083) and Power Pack (# 90031) Standard Flow Disposable Set with needleless air aspiration port* – # 24240 Flow rates: KVO – 9,000 mL/hr Priming volume: 44 mL Components: Heat exchanger, bubble trap with air aspiration port, fluid aspiration port, 60 in. patient line Filter Accessory High Flow Disposable Set* – # 90029 To be used as a replacement filter with Ranger high flow disposable sets Priming Volume: 64 mL Filter: 150 micron filter Standard Flow with Extension Disposable Set* – # 24250 Flow rates: KVO – 9,000 mL/hr Priming volume: 44 mL Components: Heat exchanger, bubble trap, needleless injection port Extension: Luer connected 30 in. extension set on 30 in. patient line Cleaning Tool Accessory – # 90030 To be used for cleaning surface of Ranger warming unit heater plates. Use: Disposable Case quantity: 12 cleaning tools/case High Flow Disposable Set* – # 24355 Flow rates: KVO – 30,000 mL/hr Priming volume: 150 mL Components: Heat exchanger, 2 IV spikes, drip chamber with 150 micron filter, needleless injection ports, auto-venting bubble trap, 60 in. patient line Filter: Replaceable 150 micron filter Drip rate: 20 drips per mL High Flow Set* – # 24365 Flow rates: KVO – 30,000 mL/hr Priming volume: 65 mL Components: Heat exchanger, auto-venting bubble trap High Flow Set* – # 24370 Flow rates: KVO – 30,000 mL/hr Priming volume: 89 mL Components: Heat exchanger, auto-venting bubble trap, 48 in. patient line *All disposable sets and set accessories: Pressure infusion: Up to 300 mmHg maximum dynamic operating pressure Material: Latex-free Case quantity: 10 disposable sets/case Sterile: EtO Use: Single use only Infection Prevention Division 3M Health Care Limited 3M House, Morley Street Loughborough Leicestershire LE11 1EP Tel: 01509 611611 Fax: 01509 237288 Email: [email protected] Web: www.3m.co.uk/ip

Transcript of 3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates:...

Page 1: 3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap

3M is a trademark of 3M Company, used under license in Canada. Bair Hugger, ranger, and the Bair Hugger and ranger logos are trademarks of arizant Healthcare inc., used under license in Canada.

Please recycle. Printed in england. © 3M 2011. all rights reserved. issued: 3/11 7829HB / 601477D

3M™ Ranger™ Blood/Fluid Warming System with Smartheat Technology

Warming Unit – # 24500Set point temperature: 41˚CFlow rates: KVO – 30,000 mL/hralarms: Over temperature primary setpoint = 43˚COver temperature secondary setpoint = 46˚CPower: 110 VaC / 220-240 VaC Weight: 3.3 kg (7.4 lbs) Dimensions: 19w x 11h x 25d cm

(7.5w x 4.5h x 10d in)

24400

Paediatric/Neonate Disposable Set*# 24400Flow rates: KVO - 6,000 mL/hrPriming volume: 20 mLComponents: Heat exchanger, bubble trap with air aspiration port, 24 in. patient line

Pressure Infusors – # 90083Pressure: 300-350 mmHg maximum dynamic operating pressureWeight: 7.0 kg (15.5 lbs) Dimensions: 33w x 43h x 25d cm

(13w × 17h × 10d in)Case quantity: 2 infusors on mounting bracketuse with 500 to 1,000 mL solution containersFor use with Power Pack(#90031 or # 90033), wall air or canned air, iV pole mountable

24450

Paediatric/Neonate Disposable Set* with Fluid Aspiration Port# 24450Flow rates: KVO - 6,000 mL/hrPriming volume: 20 mLComponents: Heat exchanger, bubble trap with air aspiration port, fluid aspiration port, 24 in. patient line

Power Pack – # 90031 Power: 220-240 VaC Pressure Setting: 300 - 350 mmHgWeight: 2.7 kg (6 lbs) Dimensions: 13w x 18h x 25d cm

(5w x 7h x 10d in)Case Quantity: 1 eachFor use with: Pressure infusor (# 90083)iV pole mountable

24200

Standard Flow Disposable Set* – # 24200Flow rates: KVO – 9,000 mL/hrPriming volume: 39 mLComponents: Heat exchanger, needleless injection port, bubble trap, 30 in. patient line

Off-set IV pole and base – # 90068 / 90069Height: adjustable from 186-279 cm (73.5 to 110 in)Weight: 15.8 kg (35 lbs)Diameter: 71cm (28 in) Base, 5 wheelsunits per box: 1 unitFor use with: Pressure infusor (# 90083) and Power Pack (# 90031)

24240 Standard Flow Disposable Set with needleless air aspiration port* – # 24240Flow rates: KVO – 9,000 mL/hrPriming volume: 44 mLComponents: Heat exchanger, bubble trap with air aspiration port, fluid aspiration port, 60 in. patient line

Filter Accessory High Flow Disposable Set* – # 90029To be used as a replacement filter with ranger high flow disposable sets Priming Volume: 64 mLFilter: 150 micron filter

24250

Standard Flow with Extension Disposable Set* – # 24250Flow rates: KVO – 9,000 mL/hrPriming volume: 44 mLComponents: Heat exchanger, bubble trap, needleless injection port extension: Luer connected 30 in. extension set on 30 in. patient line

Cleaning Tool Accessory – # 90030To be used for cleaning surface of ranger warming unit heater plates.use: DisposableCase quantity: 12 cleaning tools/case

High Flow Disposable Set* – # 24355Flow rates: KVO – 30,000 mL/hrPriming volume: 150 mLComponents: Heat exchanger, 2 iV spikes, drip chamber with 150 micron filter, needleless injection ports, auto-venting bubble trap, 60 in. patient lineFilter: replaceable 150 micron filterDrip rate: 20 drips per mL

24365

High Flow Set* – # 24365Flow rates: KVO – 30,000 mL/hrPriming volume: 65 mLComponents: Heat exchanger, auto-venting bubble trap

24370 High Flow Set* – # 24370Flow rates: KVO – 30,000 mL/hrPriming volume: 89 mLComponents: Heat exchanger, auto-venting bubble trap, 48 in. patient line

*All disposable sets and set accessories:Pressure infusion: up to 300 mmHg maximum dynamic operating pressureMaterial: Latex-freeCase quantity: 10 disposable sets/caseSterile: etOuse: Single use only

Infection Prevention Division 3M Health Care Limited3M House, Morley Street Loughborough Leicestershire Le11 1ePTel: 01509 611611 Fax: 01509 237288 email: [email protected]: www.3m.co.uk/ip

Page 2: 3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap

3M™ Ranger™ Blood/Fluid Warming Systemwith Smartheat Technology

Low MaintenanceThe 3M™ Ranger™ Blood/Fluid Warming System with Smartheat Technology. One intelligent blood/fluid warmer.

High Performance

Page 3: 3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap

Paediatric Disposable SetLow Flows

• Aliquot fluid administration

• Takes chill off fluids

• Cost effective

• Reduces priming volume

Standard Flow Disposable Set

Moderate Flows

• Responsive to changes in flow rates

• Able to warm at higher flow rates

• Cost effective

High Flow Disposable Set

High Flows

• Auto-venting bubble trap

• Fluid volume capacity

• Hassle-free

• Cost effective

• Quickly adapts to changes in flow rates: KVO to 30,000 mL/hr.

• Disposable sets slide easily into the warming unit — and they only fit in one direction, so set up is hassle-free.

• Highly conductive aluminium heating plates disperse heat immediately, handling sudden changes in flow rates with ease.

• The Ranger system cleaning tool makes maintenance quick and simple.

• Smartheat technology disperses heat evenly, eliminating potentially dangerous hotspots and overheating of fluids.

• The Ranger system’s software monitors temperature four times each second and adjusts the heat level to maintain a 41°C setpoint. The result: fast, accurate heat control.

• Sophisticated temperature maintenance and monitoring means that alarm conditions in normal operating mode are rare. If the system functions outside of normal temperature range, redundant audible/visible alarms notify users immediately.

• The Ranger system maintains safe temperatures across the flow path – from stopped flow to 30,000 mL/hr.

• Economical and easy-to-use disposable sets handle the full range of fluid warming needs.

• Paediatric/Neonate (KVO - 6,000 mL/hr)

• Standard Flow (KVO - 9,000 mL/hr)

• High Flow (KVO - 30,000 mL/hr)

Fast Functional Flexible

The Range in the Ranger™ System

No water.No risk of water-related infection

3M™ Ranger™ Blood/Fluid Warming System with Smartheat Technology

30,000 mL/hr6,000 mL/hr 9,000 mL/hr

KVO

Page 4: 3M Ranger Blood/Fluid Warming System with …...Set* with Fluid Aspiration Port # 24450 Flow rates: KVO - 6,000 mL/hr Priming volume: 20 mL Components: Heat exchanger, bubble trap

1 Integrated handle for easy transport

2 Compact, space-saving design

3 Large, easy-to-read temperature display

4 Audible/visible over-and under-temperature alarms

5 Highly conductive aluminium plates for maximum heat transfer and no hotspots

6 Inexpensive, simple-to-use disposable warming sets

7 Convenient over-temperature test function

8 Built-in IV pole clamp for secure hold

www.rangerfluidwarming.com

1

2

5

6

7

8

3

4