3D Text Shatter Effect

8/6/2019 3D Text Shatter Effect

http://slidepdf.com/reader/full/3d-text-shatter-effect 1/40

3D Text Shatter Effect – Tutorial

Written by Arno Van Waeyenberg. Published on August 14, 2009 with 106 Comments

Did you like this post?

I’m going to show you how to make a 3D text shatter effect. This effect is made intwo programs, Cinema 4D and Photoshop.If you haven’t heard of Cinema 4D before it is

a relatively easy to use 3d application, it is quite similar to 3dsMax or Maya. I will go pretty in depth with the Cinema 4D part, for all the inexperienced users, so bare with meif I go too slow. Now enough chit chat, let’s jump in.

Required Resources

In this tutorial we will be using some resources you will want to download before

starting:

http://mediamilitia.com/3d-text-shatter-effect-with-cinema-4d-and-photoshop/#comments%23comments

http://mediamilitia.com/3d-text-shatter-effect-with-cinema-4d-and-photoshop/#comments%23comments



(Optional) Cinema 4d material

*NEW* – We just released a font that you can download that creates a similareffect. Check it out!

Final Image Preview

Step 1: Creating the basic text

Open up Cinema 4D and make a text object

http://designfreebieshub.com/downloads/shinyroughsteel.zip

http://mediamilitia.com/shattered-3d-font-free/

https://www.box.net/shared/static/jgoed6n0rd.zip

http://designfreebieshub.com/downloads/shinyroughsteel.zip

http://mediamilitia.com/shattered-3d-font-free/



Write “Media Militia” in the text object

Now rotate your text object: 90* on the X axis and -90* on the Y axis

Create an Extrude NURBS object



And drop your text in it

Change the object properties of the Extrude NURBS to 0 / 0 / 35

Now take your ExtrudeNURBS object and hit “C” (this makes your object editable)



Open this object and select everything (Ctrl+A) then right click your object and press

“Connect”

You can now delete your old object that you just “Connected”

Rename your object “Media Militia”

Take the polygon tool and the Rectangle Selection tool, make sure to un check the “only

select visible elements” box

Now with the scroll button of your mouse click on your “canvas” and you will see thatfour different views just opened up, we will be using the top view



So middle click on the top view to make that view bigger, and select the first “M” letter

of Media Militia right click on it and press “Split”

This creates a new object with just the “M” now delete the selection you have selected,

this will delete the “M” from Media which leaves you with an “M” object and a “edia

Milita” object. Rename the object you just split to “M”



Now go back to your “Media Militia” object and select and split the “t”, just as we didwith the “M”. Delete the “t” from your Media Militia object and rename the “t” you just

split to “t”

Middle click on your screen and go back to perspective view. Take the Live Selection

tool and on your “M” object select the shown polygon:

Right click on your screen and select “Extrude”



Add 350 to the offset

Go into Top View and select your “t” object, press Ctrl+A (to select all the polygons)

then take your Scale Tool and scale up the X axis (or the red axis) to 220

Go back to Perspective View and select the shown polygon with the Live Selection tool



Right click on your screen and select Extrude and add 1000 m in the Offset

Take your Use Model tool and the Live Selection tool

Make a floor



Go into Right View, select your three text objects and move them right on top of your

floor

Now make two copies of each text object, and place each copy underneath it’s original,

name each object as shown below

Create a Shatter Object and copy it, name one shatter object “Shatter 1” and the other one“Shatter 2”



Change the strength of the “Shatter 1” object to 20 %, and the strength of the “Shatter 2”

object to 10%



Select both Shatter objects and copy them twice, now place a Shatter object in each

copied text object (match them up according to their number as shown)



Now select all of your text objects ending with either a 1 or a 2 and take the Live

Selection tool



And move the “green axis” up 14.3 points, so that it is on top of the original text object

Go into top view, take your Polygon tool and select all your text objects ending with “1”



Make sure you have no polygons selected (left click anywhere on your canvas to de-select any polygons you might have selected)

Right click on your canvas and select “Knife” (make sure the visible only is checked)



Now start randomly cutting from one side of your text to another, do this around 30-60times (this will make the shattered pieces smaller)

Make sure you don’t leave any long polygons like the extruded M and T uncut

Keep cutting until you have something like this



Now do the same for the text objects ending with “2”

After that go into side view and start cutting up the text objects ending with 1 and 2 just

as we did earlier (make sure to un check the “Visible Only” box)

Now select all your “2” text objects and scale up the green axis using the scale tool



Then move it down, so that the top of the letters are slightly on top of your original text



Now take all the “1” text objects and scale them up as well



Then as we did before move them down, so that the top is a little higher then the originaltext



Step 2: Adding Light and textures to our image

Make a basic light

Make three copies of it, and name them 1, 2, 3, 4 accordingly

Change the Intensity of the first three light objects to 45% and change the intensity of the4th light to 70%



Now select the 2nd 3rd and 4th light objects and change the shadow to “Shadow Maps

(Soft)”

Now go into top view and move each light as shown below



Go into side view, select all your lights and move them up a bit as shown



Now we are going to make the materials for our floor and for our text

Start by making a new material



Double click on the material (to open the material editor) and change the color to thefollowing

Now check the boxes for Luminance, Bump, Specular, and Displacement

Change the settings to the settings shown in the screen shots below (In the bump and

displacement options you will have to load in the metal texture image)



Now close the material editor, and drop the material onto the floor

This next part isn’t necessary but it gives your text a nice touch, it does take longer

to render though.

We are going to load our downloaded material and place it on all of our text objects



Then we are going to put on Global Illumination and Ambient Occlusion (just click the

check box on the top, leave all the other settings on default)



Before we render our scene we are going to set our perspective view on a nice angle, I

put my picture on this angle



Now hit the render button

This can take quite a while, depending on how strong your computer is, but after that we

are done with Cinema 4d and we will go play in photoshop

Once it is finished rendering save it as a jpg format, and 300 dpi (dots per inch)

Step 3: Editing the picture in photoshopOpen your image in photoshop

Double click your layer and name it “Base”

Make a new layer under your base layer and fill it with white



Now add a white mask to your “Base” and with a large soft black brush (bring the

opacity of your brush down to 50%) start masking out the colored edges

Now import your metal texture and resize it so that I covers the entire media militia text,

desaturate the texture and change the blending mode to overlay.

Take your eraser tool and delete any harsh exteriors

Take your base layer and go to Image>Adjustment>Curves and change the settings to

something like the following



Now duplicate this layer and hide the original, rotate and move your copy so that it is ontop of the text, then with a very soft brush mask out the parts that stick out from the text.

Then after that change the transparency to 5%-50% (change it around so that you get arandom look) and with a small brush start brushing the edges of the ink that is on top of

your text



Duplicate your original ink texture and cover another part of the text and repeat the same

process as with the other ink texture. Do this until all your text is covered with ink textures.



Now select all your ink layers and add them to a group, name the group Ink.

Change the opacity of your ink group to 40%

Now make a new layer, name it Shadow, and with a black color and a soft, big brush add

a line around the text as shown:



Add a Gaussian Blur, 17 px, and bring down the opacity to 30 percent. Now delete any

parts of the shadow that you don’t like with a big soft brush



And we are pretty much finished

If you want to go even further you can take the dodge and burn tools and make some

highlights on your Base layer

I hope this tutorial was of some help Cheers!

3D Text Shatter Effect

Documents

Transcript of 3D Text Shatter Effect