AUTOCAD EXERCISESLines and Circles: Use the methods indicated on the top of each drawings. Dont bother yourself about dimensions. Later you can use Direcct Distance Entry (DDR) method.1Rectangle, Multi Line, Extend, Offset, Trim, and Introduction to Object Snaps2Accurate input3Move, Copy, Stretch, Mirror4Rotate, Fillet, Chamfer, Array5Layer, Text, Dimensioning, Scale: Create Layers for Dimensions, Texts, and Lines using different colours. Dimension all the previous drawings.Creating and Managing Blocks: Create the drawings below and convert them to block.6Hatching: Convert the left drawing to the right drawings using hatching tool.Note 1: The colour is main colour is blue7Polylines - creating and editing, Revclouds8Isometric Drawing and 3D: Use both methods to draw the diagrams.9Note 2: This is for ViewpointsExtrude1011Revolving Objects, Revsurf, and Revolve12Materials and RenderingUsing primitive Solids13Solid Editing CommandsTranform this shape to others using appropriate solid editing commands14Use align to produce the right drawing from the left solidsUsing Grips15Setting and Using UCSMore Examples1617Fillet and Mirror1819