2014 Product Catalogue - Dealer.com USpictures.dealer.com/ljpattersonsalesampservicedieppetc/...6...
Transcript of 2014 Product Catalogue - Dealer.com USpictures.dealer.com/ljpattersonsalesampservicedieppetc/...6...
2014 Product Catalogue
www.embmfg.com
2014 Product Catalogue
Log Splitters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Wood Chippers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Wood Processors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Skidding Winches & Plates . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Log Grapples . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Log Grapple Trailers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Backhoes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Manure Spreaders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Generators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Table of Contents
Manufactured and assembled in Canada, Wallenstein’s quality manufacturing process ensures the highest quality products. The result is heavy duty equipment, built to handle all your outdoor jobs year after year.
Wallenstein has partnered with the industry’s best engine manufacturers to ensure your Wallenstein product continues to run smoothly for it’s entire life.
Quality Products, Built in Canada
When you purchase any new Wallenstein product, we’ve got you covered with our 3 Year Consumer Warranty.
For full details visit www.embmfg.com.
Great Productswith Great Warranty
5Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
DIVIDE AND CONQUERPiece by piece, Wallenstein Log Splitters reduce big jobs into
small chunks that are easy to handle and quick to finish.
LOG SPLITTERS
LOG SPLITTERS
6 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS WHY WALLENSTEIN?
The wide wedge splits the log using minimal distance, reducing cycle time requirements.
Full splitting force is always applied because the cylinder is directly inline with the log, powering through the toughest wood with ease.
DIRECT PRESSURE
WIDE WEDGE
AVG.
FULL STROKECYCLE TIMEFull stroke cycle time is the amount of time it takes forthe splitting wedge to travelthe full cylinder length fromthe start position to the anviland back to start.
AVERAGE SPLITTINGCYCLE TIMEAverage splitting cycle timeis the average amount of timeit takes for the splitting wedgeto fully split a log, setup thenext piece and begin splitting again.
The average splitting cycle time is based on straight grain logs. The average splitting cycle time will increase when processing stringy or cross-grain logs.
CYCLETIME
When you purchase any new Wallenstein product, we’ve got you covered with our 3 Year Consumer Warranty.
Great Products nowWith Great Warranty
7Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
DIRECT PRESSURE
SPEED | POWER | VERSATILITY | RELIABILITY
Switched to reverse, the splitting wedge returns to the start position hands free. Once at the end of the cylinder travel (start position) the controls automatically switch from reverse to neutral. Both features allow you to clear the split pieces and prepare the next chunk for splitting while the wedge is returning.
HANDS FREE RETURN - AUTO NEUTRAL
Maximize your efficiency with the 2-stage pump that movesquickly and splits powerfully. Stage 1 quickly moves the wedgefrom the start position to the point of contact where minimal pressure is required. As the splitting action begins, the flow decreases and the pressure increases to provide maximumsplitting force.
2 STAGE HYDRAULIC PUMP
SPEED OF RETURNBecause of shaft displacement, less surface area means that less oil is required, thus increasing the speed to return the splitting wedge to the start position.
FORCE FOR SPLITTINGFull cylinder bore maximizes force because there is more area to apply pressure.
CYLINDER DYNAMICS SPEED VS. FORCE
SPEEDTORQUE
* WX models only
LOG SPLITTERS
8 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
SPLIT OPENING: 24” SPLITTING FORCE: 20 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
9” Wedge Height Safety Chains& 2” Ball Hitch
Hands Free Return- Auto Neutral
Colour Options2 Stage HydraulicPump 11GPM
189 CC EA190VSubaru Engine
Tires4.80 x 8”
4” Cylinder Diameter24” Stroke
STANDARD FEATURES OPTIONAL FEATURES
STANDARD FEATURES
Fenders Shelf KitPart# 2064A520
4-Way WedgePart# W4110 (WE 220)Part# W4120 (WE 230)
9Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
SWE 200 SERIES TRAILER LOG SPLITTER
Powerful and versatile, the WE 200 series provides dependable splitting force and fast, efficient workflow for logs up to 24” long. Powered by a Subaru engine and backed by Wallenstein’s 3 year Warranty, these log splitters are built to handle any size of job.
• 189 CC EA190V Subaru Engine• 4” Cylinder Diameter, 24” Stroke• 31.5” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 84” x 40” x 46”• Weight 397 lbs.• 3 Year Consumer Warranty
• 189 CC EA190V Subaru Engine• 4” Cylinder Diameter, 24” Stroke• 24” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 81” x 40” x 38”• Weight 342 lbs.• 3 Year Consumer Warranty
WE 230 HORIZONTAL/VERTICAL MODELWE 220 HORIZONTAL MODEL
10 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
9” WedgeHeight
Hands Free Return - Auto Neutral
2 Stage Hydraulic Pump 11 GPM
160 CC GX 160 Honda Engine (Except WX510, 515,
530)
STANDARD FEATURES
Powerful & versatile, the WX 500 Series provide dependable splitting force and fast, efficient workflow for wood up to 24” long. With your choice of Honda engine, the WX 500 Series is perfect for everyday rental use or seasonal use at home.
SPLIT OPENING: 24”SPLITTING FORCE: 20 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
Safety Chains & 2” Ball Hitch
STANDARD FEATURES OPTIONAL FEATURESCylinder Diameter/Stroke 4”/24”
Tires 4.80 x 8”(Except WX510)
Factory Installed Light Kit
4-Way Splitting Wedge
Colour Options
11Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
9” WedgeHeight
CHOOSE THE RIGHT SPLITTER FOR YOU
Splitting force required depends on grain type, not log diameter. Stringy, cross-grain logs take more power to split than straight-grain wood.
SPLITTING OPENING
MODEL 515520/L/T540/L
UP TO 24” 36” 48”
FREQUENCY OF USE (ENGINE)
GC GXMODEL 510
515530
SEASONAL RENTAL /COMMERCIAL
520/L/T540/L
SPLITTING FORCE
MODEL 510515520/L/T530540/L
20 TONS 25 TONS 31 TONS
Straight(Bush)
Cross Grain(Fence line)
• 160 CC GC160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 16” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 68”x38 x32”• Weight 299 lbs.
WX 510
WX 520T WX 530 WX 540
WX 515 WX 520• 160 CC GX160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 19” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 72”x42”x36”
• Weight 365 lbs.• Light Kit (WX 520L) • Optional 4-Way wedge: W4110
• 160 CC GC160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 24” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 80” x 48” x 40”• Weight 470 lbs.
• 160 CC GX160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 24” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 80” x 48” x 40”• Weight 470 lbs.
• 160 CC GX160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 28” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 72” x 42” x 45”• Weight 375 lbs.• Optional 4-Way wedge: W4110
WX 500 SERIES LOG SPLITTER
• Weight 360 lbs.• Light Kit (WX 515L) • 28” bed height (WX 515T) • Optional 4-Way wedge: W4110
• 160 CC GC160 Honda Engine• 4”/24” Cylinder Diameter/Stroke• 19” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 72”x42”x36”
• Light Kit (WX 530L) • Optional 4-Way wedge: W4120
• Light Kit (WX 540L) • Optional 4-Way wedge: W4120
12 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
WX 600 Series offers increased splitting force to power through tough crossgrain wood. Logs full of knots and branches are easily split with the extra performance, that won’t slow you down.
SPLIT OPENING: 24”SPLITTING FORCE: 25 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
10” WedgeHeight
Hands Free Return - Auto Neutral
2 Stage Hydraulic Pump 11 GPM
270 CC GX200 Honda Engine or 169 CC SP170 Subaru Engine
Safety Chains & 2” Ball Hitch
STANDARD FEATURES OPTIONAL FEATURES
STANDARD FEATURES
Cylinder Diameter/Stroke4.5”/24”
Tires4.80 x 8”
Factory Installed Light Kit
4-Way Splitting Wedge
WX 600 SERIES LOG SPLITTER
Colour Options
13Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
SPLITTING OPENING
MODEL 615620/L/T630640/L
UP TO 24” 36” 48”
SPLITTING FORCE
MODEL
20 TONS 25 TONS 31 TONS
615620/L/T640/L
Straight(Bush)
Cross Grain(Fence line)
Splitting force required depends on grain type, not log diameter. Stringy, cross-grain logs take more power to split than straight-grain wood.
FREQUENCY OF USE (ENGINE)
SP GXMODEL 615
630
SEASONAL RENTAL /COMMERCIAL
620/L/T640/L
CHOOSE THE RIGHT SPLITTER FOR YOU
WX 600 SERIES LOG SPLITTER
• 169 CC SP170 Subaru Engine• 4.5”/24” Cylinder Diameter/Stroke• 21” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 78” x 40” x 42”
WX 615su
WX 620T WX 630su WX 640
WX 620
• 169 CC SP170 Subaru Engine• 4.5”/24” Cylinder Diameter/Stroke• 27” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 80” x 48” x 40”• Weight 525 lbs.• Light Kit (WX 630suL)
• 270 CC GX200 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 27” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 80” x 48” x 40”• Weight 530 lbs.• Light Kit (WX 640L)
• 270 CC GX200 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 30” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 86” x 49” x 42”• Weight 488 lbs.• Optional 4-Way wedge: W4140
• Weight 475 lbs.• 30” Bed Height (WX 615Tsu) • Optional 4-Way wedge: W4140
• 270 CC GX200 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 21” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 78” x 40” x 42”
• Weight 480 lbs.• Light Kit (WX 620L) • Optional 4-Way wedge: W4140
• Optional 4-Way wedge: W4130
• Optional 4-Way wedge: W4130
14 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
Built with regular use in mind, the sturdy and dependable WX 900 Series offers power and heavy duty construction. Upgraded towing features and log lift options make the WX 900 Series the right choice for contractors that need to travel from site to site. With up to 48” splitting length the WX 900 Series is also ideal for outdoor furnace applications.
SPLIT OPENING: 24” - 48”SPLITTING FORCE: 25 - 31 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
10” WedgeHeight
Safety Chains & 2” Ball Hitch
Hands FreeReturn - Auto Neutral
2 Stage Hydraulic Pump 16GPM
270 CC GX 270 Honda Engine
Tires5.30 x 12”
STANDARD FEATURES OPTIONAL FEATURES
STANDARD FEATURES
HydraulicLog Lift(WX950, 960, 970)
Factory Installed Light Kit
4-Way Splitting Wedge
WX 900 SERIES LOG SPLITTER
Colour Options
15Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
SPLITTING OPENING
MODEL 910/T950980
UP TO 24” 36” 48”
920960
930970
SPLITTING FORCE
MODEL
20 TONS 25 TONS 31 TONS
910/T920930950960970
980
Straight(Bush)
Cross Grain(Fence line)
CHOOSE THE RIGHTSPLITTER FOR YOU
Splitting force required depends on grain type, not log diameter. Stringy, cross-grain logs take more power to split than straight-grain wood.
WX 900 SERIES LOG SPLITTER
615630
• 270 CC GX270 Honda Engine• 4.5”/36” Cylinder Diameter/Stroke• 21” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 97” x 63” x 35”• Weight 720 lbs.• Optional 4-Way wedge: W4130
WX 920
WX 960 WX 970 WX 980
WX 930 WX 950
• 270 CC GX270 Honda Engine• 4.5”/48” Cylinder Diameter/Stroke• 25” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 130” x 63” x 38”• Weight 1135 lbs.• Optional 4-Way wedge: W4130
• 270 CC GX270 Honda Engine• 5”/24” Cylinder Diameter/Stroke• 26” Bed Height• Horizontal & Vertical Splitter Orientation• Dimensions (LxWxH) 80” x 50” x 42”• Weight 635 lbs.• Light Kit (WX 980L)
• 270 CC GX270 Honda Engine• 4.5”/36” Cylinder Diameter/Stroke• 25” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 107” x 63” x 38”• Weight 990 lbs.• Optional 4-Way wedge: W4130
• 270 CC GX270 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 21” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 78” x 50” x 35”• Weight 510 lbs.
WX 910 WX 910T
• 270 CC GX270 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 25” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 81” x 63” x 38”• Weight 785 lbs.• Optional 4-Way wedge: W4130
• 270 CC GX270 Honda Engine• 4.5”/48” Cylinder Diameter/Stroke• 21” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 121” x 63” x 35”• Weight 865 lbs.• Optional 4-Way wedge: W4130
• 270 CC GX270 Honda Engine• 4.5”/24” Cylinder Diameter/Stroke• 28.5” Bed Height• Horizontal Splitter Orientation• Dimensions (LxWxH) 78” x 50” x 42”• Weight 525 lbs.• Optional 4-Way wedge: W4140
• Light Kit (WX 910L) • Optional 4-Way wedge: W4140
• Optional 4-Way wedge: W4130
16 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
Making the most of your equipment, the WX 300 Series is a powerful 3-Point hitch log splitter that’s ready to work. The WX 300 gives you the splitting force and log length you need on the farm. With up to 48” splitting length the WX 300 Series is ideal for outdoor furnace applications.
SPLIT OPENING: 24” - 48”SPLITTING FORCE: 20 - 31 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
Three Point Hitch
STANDARD FEATURES OPTIONAL FEATURES
Hands Free Return - Auto Neutral
Closed Centre Hydraulic Valve
4-Way Splitting Wedge
WX 300 SERIES LOG SPLITTER
Colour Options
17Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
• Wedge Height 10”• 4.5”/36” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 13 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 96” x 30” x 24”• Weight 540 lbs.• Closed centre hydraulics (WX 320C) • Optional 4-Way wedge: W4130
• Wedge Height 10”• 4.5”/48” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 13 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 120” x 30” x 24”• Weight 685 lbs.• Closed centre hydraulics (WX 330C) • Optional 4-Way wedge: W4130
CHOOSE THE RIGHT SPLITTER FOR YOU
SPLITTING OPENING
MODEL 310350360370
UP TO 24” 36” 48”
320 330
SPLITTING FORCE
MODEL 310350370
20 TONS 25 TONS 31 TONS
320330
360
Straight(Bush)
Cross Grain(Fence line)
WX 300 SERIES LOG SPLITTER
• Wedge Height 9”• 4”/24” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 10 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 70” x 28” x 24”• Weight 220 lbs.• Closed centre hydraulics (WX 310C) • Optional 4-Way wedge: W4110
WX 310
WX 350 WX 360 WX 370
WX 320 WX 330
• Wedge Height 10”• 5”/24” Cylinder Diameter/Stroke• Vertical Splitter Orientation• 16 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 70” x 28” x 26”• Weight 349 lbs. • Closed centre hydraulics (WX 360C) • Optional 4-Way wedge: W4130
• Wedge Height xv”• 4”/24” Cylinder Diameter/Stroke• Horizontal & Vertical Splitter Orientation• 10 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 86” x 30” x 30”• Weight 350 lbs.• Closed centre hydraulics (WX 370C) • Optional 4-Way wedge: W4120
• Wedge Height 9”• 4”/24” Cylinder Diameter/Stroke• Vertical Splitter Orientation• 13 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 70” x 28” x 18”• Weight 239 lbs.• Closed centre hydraulics (WX 350C) • Optional 4-Way wedge: W4120
18 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS
Powered from your skidsteer, the WX400 series are quick to split. With powerful splitting force and the ease of connecting to your skidsteer, your job will be finished in no time.
SPLIT OPENING: 24” - 36”SPLITTING FORCE: 20 - 31 TONS
CYCLE TIME:AVERAGE CYCLE:7 SECONDS
CYCLE TIME:FULL STROKE:14 SECONDS
7 14
Skidsteer Mount
STANDARD FEATURES OPTIONAL FEATURE
Hands Free Return - Auto Neutral*
9” Wedge Height
4-Way Splitting Wedge*
* Hands Free Return - Auto Neutral and 4-Way Splitting Wedge only on upright models
WX 400 SERIES LOG SPLITTER
Colour Options
19Wallenstein 2014 Product Catalogue
LOG
SP
LITT
ER
S
• 4.5”/36” Cylinder Diameter/Stroke• Inverse Horizontal Splitter Orientation• 13 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 96” x 36” x 22”• Weight 585 lbs.
• 4”/24” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 10 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 66” x 36” x 22”• Weight 370 lbs.• Optional 4-Way wedge: W4120
• 4”/24” Cylinder Diameter/Stroke• Inverse Horizontal Splitter Orientation• 10 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 66” x 36” x 22”• Weight 339 lbs.
WX 410
WX 450 WX 460 WX 470
WX 430 WX 440
• 5”/24” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 16 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 68” x 36” x 24”• Weight 480 lbs.• Optional 4-Way wedge: W4130
• 4”/24” Cylinder Diameter/Stroke• Horizontal & Vertical Splitter Orientation• 10 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 96” x 36” x 26”• Weight 375 lbs.• Optional 4-Way wedge: W4120
• 4.5”/36” Cylinder Diameter/Stroke• Horizontal Splitter Orientation• 13 GPM Recommended Minimum Hydraulic Flow• Dimensions (LxWxH) 90” x 36” x 22”• Weight 680 lbs.• Optional 4-Way wedge: W4130
CHOOSE THE RIGHT SPLITTER FOR YOU
SPLITTING OPENING
MODEL 410440460470
UP TO 24” 36”
430450
SPLITTING FORCE
MODEL 410440470
20 TONS 25 TONS 31 TONS
430450
460
Straight(Bush)
Cross Grain(Fence line)
WX 400 SERIES LOG SPLITTER
20 Wallenstein 2014 Product Catalogue
LOG
SP
LIT
TE
RS Options
4 Way Wedge
Shelf Kit
PTO Pump Kit
Hitch Extension
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA -RED -GRY
Part# Description
W4110 • WE220, WX310, WX515, WX520, WX520T
W4120 • WE230, WX350, WX370, WX440, WX470, WX530, WX540
W4130 • WX320, WX330, WX360, WX370, WX450, WX60, WX630, WX640, WX920, WX930, WX950, WX960, WX970, WX980
W4140 • WX615,WX620,WX620T, WX910, WX910T
Part# Description
2064A520 • WE220, WE230
Part# Description
W4180 • WX300 series • 3 Point Hitch models
Part# Description
W4202 • 12” hitch extension for 2” ball hitch• Required for ATV
21Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
THE BENEFITSREALLY PILE UP.When it’s time to clean up, Wallenstein BX Wood Chippers and Wallenstein BXM Chipper / Shredders make quick work, turning waste into valuable chips and mulch.
CHIPPERS & CHIPPER / SHREDDERS
CHIPPERS & CHIPPER SHREDDERS
22 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
RESOURCEFUL & TIDYCHIPS AND MULCH
PREVENTS...
A BEAUTIFUL RESOURCETurn branches and leaves into a valuable resource that’s perfect for pathways and flowerbeds with a Wallenstein BX Chipper or BXM Chipper / Shredder.
Chipping is your best method of reducing large, awkward branches to a fraction of their size, making handling easy and creating a useful ground cover that helps control weeds and retain moisture in hot weather. Leaf and twig cleanup is also simple with the BXM Chipper / Shredder, creating a fine mulch that adds that special finishing touch to your perfectly manicured flowerbeds.
Wood chips create a
barrier, conserving soil
moisture and moderating
soil temperature.
Use of whole leaves form a soggy mat that impede new growth of plants and lawn grass and promote fungal growth.
Use mulch or chips
to suppress the
growth of weeds.
DROUGHT MOLD WEED CONTROL
PROMOTES...
Chips and mulch increase
the rate of decomposition,
adding nitrogen into the soil
for improved plant growth
During the day, ground-cover
protects the soil from too much
heat. At night, it insulates,
reducing plant stress.
Ground cover reduces evap-oration of valuable moisture by blocking direct sunlight to the surface of the soil.
NITROGEN RELEASE SOIL TEMPERATURE MOISTURE RETENTION
23Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
PROTECT | ADVANCE | MODERATE | ENHANCE
Together, leaves, bark and branches stagger the release of nitrogen back into the soil.
As the chips break down, heat is released, moderating soil temperature.
Chips absorb moisture and slow evaporation; keeping more water for plants.
Chips act as a diffuser and protective barrier against high heat.
NITROGEN
DECOMPOSITION
MOISTURE RETENTION
HEAT DEFLECTION
BEAUTY AND CONVENIENCE
WOOD CHIPS, MULCH AND YOUR GARDEN
The final accent of precisely edged flowerbeds painted with your favourite blooms is the palate of wood chips and mulch that defines green lawn from flowerbed. Wallenstein Chippers and Chipper / Shredders give you the tool to make beautiful chips and mulch for your own gardens without the need to annually buy mulch and pay for delivery. With a Wallenstein, you can chip and shred right where you need it, saving, literally, wheelbarrow loads of work.
CLEAN UP & REMOVALFor woodlot owners, arborists and municipalities, Wallenstein means disposing of brush piles easily, creating ground cover that’s ideal for pathways, flowerbeds or improving the composting process.
CHIPPERS & CHIPPER SHREDDERS
24 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
WHY WALLENSTEIN?
Turn waste brush, branches and bark into valuable chips with the BX series of Wood Chippers. For finely mulched leaves and branches, as well, the BXM Chipper / Shredder series is right for you.
Cedar mulch shown
Actual colors may vary.
The BX Series of Wood Chippers and BXM Series of Chipper / Shredders are available in various engine sizes to suit your horsepower requirements. Powered by Honda, Subaru or Kohler, Wallenstein uses only the most reliable engines to power it’s line of chippers and chipper / shredders.
Easily control where you want your chips or mulch with the double adjustable Exit Chute. The chute swivels 360 degrees and the top deflector adjusts the distance.
360º EXIT CHUTE
At the heart of the Wallenstein BX Chipper is an oversize heavy duty rotor and reversible chipping
blades. The large diameter rotor has a faster tip speed for improved chipping action. The heavy
gauge steel keeps your momentum to power through tree trunks. The reversible
blades are precision cut tool steel, hardened for long
lasting sharpness.
HEAVY DUTYCHIPPING POWER
ENGINE PERFORMANCE
MATCH YOUR STYLE
When you purchase any new Wallenstein product, we’ve got you covered with our 3 Year Consumer Warranty.
GREAT PRODUCTSNOW WITH GREAT WARRANTY
For details, visit: www.embmfg.com.
25Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
GREAT PRODUCTSNOW WITH GREAT WARRANTY
SPEED | POWER | VERSATILITY | RELIABILITY
The centrifugal clutch on engine powered trailer units allows for easy starts and promotes longevity, low maintenance and ease of use. There’s no complicated starting system or extra pulleys.
CENTRIFUGALCLUTCH
NO MESS SHREDDING
The over-sized chipping hopper is precisely angled to self-feed, reducing the need to limb branches before processing.
The top shredding hopper on the BXM models is tall and wide to easily put branches, leaves and bark in while keeping you safe.
SELF FEEDINGINTAKE HOPPERS
Welded construction improves durability and minimizes “bolt-on” parts, including the full frame base.
WELDED CONSTRUCTION
For shredding, the BXM revolutionizes the whole way you’ve come to expect finely mulched ground cover, with three
sets of cutting knives and the exclusive CHOP-Block.
The CHOP-Block works like an anvil, trapping material and forcing it to be shredded more precisely for consistent cut, clean-out and delivery through the exit chute.
Unlike conventional shredders, the BXM has no screens which greatly reduces clogging, even with wet material.
Shredded material uses the same exit chute as
the wood chips, making clean-up quick andeasy with less handling.
BXM 42
CHIPPERS & CHIPPER SHREDDERS
26 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
Self Feeding Chipper Hopper
Hardened Tool Steel Reversible Chipping Blades
360º Exit Chute
3-Point Hitch Mount iMatchTM
quick hitch compatible
PTO Drivetrain,shearbolt protected
Oversized DiameterChipping Rotor
Directly connected to your tractor’s PTO, power is transferred straight into chipping / shredding. The self-feed hopper automatically pulls the branches in as it chips.
STANDARD FEATURES
3-POINT HITCH/PTO
• 35-100 HP Range• 60-70 HP Required for Max. Cap.• 6.5” x 12” Chipper Housing Opening• 30” Rotor with 4 Knives at 197 lbs.• Dimensions (LxWxH) 50” x 52” x 74”• 74” Discharge Hood Height• 770 lbs. Total Weight
• 65-150 HP Range• 85-110 HP Required
for Max. Capacity • 10” x 15” Chipper Housing Opening• 36” Rotor with 4 Knives at 280 lbs. • Dimensions (LxWxH) 52” x 50” x 90”• 90” Discharge Hood Height• 1000 lbs. Total Weight
• 20-50 HP Range• 35-40 HP Required for Max Cap.• 4” x 10” Chipper Housing Opening• 25” Rotor with 4 Knives at 75 lbs. • Dimensions (LxWxH) 40” x 42” x 60”• 60” Discharge Hood Height• 425 lbs. Total Weight
• 12-30 HP Range• 25-30 HP Required for Max. Cap.• 3” x 6” Chipper Housing Opening• 17.5” Rotor with 2 Offset Knives at 45 lbs.• Dimensions (LxWxH) 54” x 36” x 60”• 58” Discharge Hood Height• 320 lbs. Total Weight
BX 62sBX 42sBX 32s BX 92s
BX 32s
27Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
3-POINT HITCH/PTO 3-POINT HITCH/PTO
Directly connected to your tractor’s PTO, power is transferred straight into chipping / shredding action - quickly turning limbs, branches or debris up to 4” in diameter into valuable chips or mulch.
Includes ChippingFeatures of BX Series
STANDARD FEATURES
BXM 32
MODEL
3” 4”
LOG DIAMETER CHIPPING CAPACITY
BXM 32 BXM 42BXMC 32SBXMC 32B
Exclusive Chop Block uses an anvil action to finely process material
Chipper & Shredder use the same 360º exit chute
BX 32s
BXM 42• 30-90 HP Range• 35-50 HP Required for Max. Capacity • 4” x 10” Chipper Housing Opening with 4” Capacity• 10.5” x 10.5” Shredder Housing Opening with 2” Capacity• 25” Chipper Rotor with 2 Knives at 170 lbs.• 30 Shredder Knives• Dimensions (LxWxH) 72” x 44” x 62”• 800 lbs. Total Weight* 3PH mount iMatchTM & quick hitch compatible
• 12-35 HP Range• 25 - 30 HP Required for Max. Capacity • 3” x 6” Chipper Housing Opening with 3” Capacity• 10” x 10” Shredder Housing Opening with 1” Capacity• 17.5” Chipper Rotor with 2 Offset Knives at 70 lbs. • 27 Shredder Knives• Dimensions (LxWxH) 54” x 36” x 60”• 445 lbs. Total Weight* 3PH mount iMatchTM & quick hitch compatible
BXM 32
BX CHIPPERS & BXM CHIPPER / SHREDDERS
28 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
MODEL
4” 7” 10”
LOG DIAMETER CHIPPING CAPACITY
BX102R
BX 72R BX 42R BX 102R
Hydraulic Feeding Hopper
Spring Loaded Auto Adjusting Feed Rollers
Safety Start/Stop Control Lever
Hydraulic Power Pack
STANDARD FEATURES OPTIONAL
With a PTO powered rotor and hydraulic feed hopper, branches, limbs and brush are control fed for continuous chipping at maximum capacity.
CHOOSE THE RIGHT CHIPPER OR CHIPPER / SHREDDER FOR YOU.
Easy start tension relief
Slab style opening
STANDARD FEATURES
• 40-100 HP Range• 60-70 HP Required for Max. Capacity • 7” x 12” Chipper Housing Opening• 28” Rotor with 4 Knives at 185 lbs. • Dimensions (LxWxH) 83” x 56” x 90”• 90” Discharge Hood Height• 1300 lbs. Total Weight• Optional Hydraulic Power Pack (Part #C3540)* Requires 3 plus g.p.m. from tractor remotes* 3PH mount iMatchTM & quick hitch compatibleBX 72RI: Includes Intellifeed
• 25-50 HP Range• 35-40 HP Required for Max. Capacity • 4” x 10” Chipper Housing Opening• 25” Rotor with 4 Knives at 74 lbs.• Dimensions (LxWxH) 40” x 42” x 60”• 60” Discharge Hood Height• 625 lbs. Total Weight• Optional Hydraulic Power Pack (Part #C3540)* Requires 3 plus g.p.m. from tractor remotes * 3PH mount iMatchTM & quick hitch compatible
BX 72RBX 42R
29Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
Dual active rollers Safety control bar Top roller hydraulic lift with 1800 lbs crush force (102RP/RPI)
Hydraulic winch with 1200 lbs pull force(102RP/RPI)
OPTIONAL
The optional fully programmable, IntelliFeed monitors the rotor’s rpm, slowing the rollers’ speed as needed. IntelliFeed continues the chipping at a volume that best matches its rpm.
* Not available for BX42R
• 65-150 HP Range• 90-120 HP Required for Max. Capacity• 10”H x 17”W Chipper Housing Opening• 10” Diameter Capacity (Max 17” Slab)• 36” Chipper Rotor at 425 lbs. • 4 Segmented, Hardened Tool Steel Knives • Dimensions (LxWxH) 108” x 87” x 100” Open 85” x 73” x 100” Closed• Dual Horizontal Hydraulic Motorized Rollers• 360° Discharge Hood Rotation • 2000 lbs. Total Weight • Optional Hydraulic Power Pack (Part# C4550) * Requires 3 plus g.p.m. from tractor remotes * 3PH mount iMatchTM & quick hitch compatible
BX 102RI: Includes Intellifeed BX 102RP: Includes Hydraulic Winch and Top Roller Hydraulic Lift BX 102RPI: Includes Intellifeed, Hydraulic Winch and Top Roller Hydraulic Lift
BX 102R
BXR HYDRAULIC ROLLER FEED
30 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
Pick up and go wherever you need it. Ideal for keeping job sites clean and tidy, Contractors, Arborists and Municipalities can easily chip or mulch branches into vehicles and haul them away with the trailer style BXMT Chipper / Shredders or BXT Chippers.
STANDARD FEATURESHighway Travel for theBXT with Signal Lights
Torflex® Suspension Axles for Smooth Trailing
Exclusive Chop Block uses an anvil action to finely process material
Chipper & Shredder use the same 360º exit chute
SHREDDER EXCLUSIVE FEATURES
CHOOSE THE RIGHT CHIPPER OR CHIPPER / SHREDDER FOR YOU.
MODEL
3” 4” 6”
LOG DIAMETER CHIPPING CAPACITY
BXMT 3209 BXT 4213 BXT 6224BXMT 3213 BXT 4224 BXT 6238
BXMT 4224
• 670 CC Honda GX 670 Engine • 720 CC Subaru EFI Engine• 999 CC Kohler Engine• 4” x 10” Chipper Housing Opening with 4” Cap.• 10.5” x 10.5” Shredder Housing Opening with 2” Cap.• 30 Shredder Knives - 25” Chipper Rotor with 2 Knives at 170 lbs. • Dimensions (LxWxH) 84” x 64” x 64”• 1080 lbs. Total Weight• 6.50 x 8 Tire Size• Built-in Tool Box
• 389 CC Honda GX 390 Engine • 404 CC Subaru Engine• 3” x 6” Chipper Housing Opening with 3” Cap.• 10” x 10” Shredder Housing Opening with 1” Cap.• 17.5” Chipper Rotor with 2 Offset Knives at 70 lbs. • 27 Shredder Knives• Dimensions (LxWxH) 60” x 44” x 58”• 520 lbs. Total Weight• 4.80 x 8 Tire Size
BXMT 3209/3209su BXMT 3213/3214su• 270 CC Honda GX 270 Engine• 265 CC Subaru Engine• 3” x 6” Chipper Housing Opening with 3” Cap.• 10” x 10” Shredder Housing Opening with 1” Cap.• 17.5” Chipper Rotor with 2 Offset Knives at 70 lbs. • 27 Shredder Knives• Dimensions (LxWxH) 58” x 44” x 56”• 400 lbs. Total Weight• 4.10 x 6 Tire Size
BXMT 4224/4228su/4238
31Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
Belt Drive Hardened Tool Steel Reversible Chipping Blades
360º ExitChute
Centrifugal Clutch for easy 1 step start-up
Electric Start(Except on BXMT3209)
Self Feeding Chipper Hopper
STANDARD FEATURESOversized DiameterChipping Rotor
BXT 6238• 999 CC Kohler CH 980 Engine • 6.5” x 12” Chipper Housing Opening• 30” Rotor with 2 Knives at 197 lbs.• Dimensions (LxWxH) 86” x 75” x 88”• 88” Discharge Hood Height• 1385 lbs. Total Weight• 20.50 x 8-10 Tire Size• Built-in Tool Box
• 670 CC Honda GX 670 Engine • 720 CC Subaru EFI Engine • 6.5” x 12” Chipper Housing Opening• 30” Rotor with 2 Knives at 197 lbs.• Dimensions (LxWxH) 86” x 75” x 88”• 88” Discharge Hood Height• 1365 lbs. Total Weight• 20.50 x 8-10 Tire Size• Built-in Tool Box
BXT 6224/6228su• 670 CC Honda GX 670 Engine • 720 CC Subaru EFI Engine • 4” x 10” Chipper Housing Opening• 25” Rotor with 2 Knives at 74 lbs.• Dimensions (LxWxH) 72” x 59” x 72”• 72” Discharge Hood Height• 825 lbs. Total Weight• 4.80 x 8 Tire Size• Built-in Tool Box
BXT 4224/4228su• 389 CC Honda GX 390 Engine • 404 CC Subaru Electric Start Engine• 4” x 10” Chipper Housing Opening• 25” Rotor with 2 Knives at 74 lbs.• Dimensions (LxWxH) 72” x 59” x 72”• 72” Discharge Hood Height• 785 lbs. Total Weight• 4.80 x 8 Tire Size• Built-in Tool Box
BXT 4213/4214su
BXMT CHIPPER / SHREDDERS & BXT CHIPPERS
32 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
INDUSTRIAL STRENGTH, DURABILITY & SERVICEABILITY
STANDARD FEATURES
POWERFUL PRODUCTIVITY
The Wallenstein BXTR6438 is a commercial chipper with a big appetite, but never bites off more than it can chew. That’s because the BXTR6438 features the newest innovations in contractor and rental-grade chippers that keep you productive. With more standard features, engineering that maximizes power and easy operator controls, the Wallenstein BXTR6438 makes a meal out of almost anything.
Auto Engage Drive eliminates lever-activated belttightener,improvingbelt life.
Torflex® Suspension Axle, Highway Tires
Brake and L/R Turn Signal Lights
360° Swivel And Angle Control Chute
Built-in Storage Box
33Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
Built-in Storage Box
STANDARD FEATURES
999 CC Kohler Engine
Hydraulically driven dual active rollers
If the BXTR’s rpm reaches its minimum setting, Wallenstein’s Rapid Recovery technology takes over, automatically reversing the log away from the rotor. Rapid Recovery eliminates friction against the rotor, allowing the rotor to increase rpm’s faster.
RAPID RECOVERYAUTO REVERSE
Lift assist for servicing using gas shocks.
Angling the log against the rotor requires less horsepower to chip, saving fuel.
ANGLEDROTOR
The Safety Control Bar provides forward/reverse control and two stop positions. Stop the feed rollers when the bar is pushed in or pulled out, providing another level of safety that keeps the operator out of harm’s way.
SAFETY/CONTROL BAR
Fully programmable, IntelliFeed monitors the rotor’s rpm, slowing the rollers’ speed as needed. IntelliFeed continues the chipping at a volume that best matches its rpm.
7” X 11” OpeningThe extra wide chipper opening easily feeds awkward branches and logs with less limbing before chipping.
OPTIONAL (standard on BXTR6438P)
Electric brakeseliminate extra load on vehicle (Part# C300)
Auto engage fluid coupler is ideal for contractors where heavy duty work is required (Part# C200)
BXTR 6438/6438P• 999 CC Kohler Engine• 7”H x 11”W Chipper Housing Opening• 7” Diameter Capacity (Max 11” Slab)• 25” x 34” Chipper Hopper Opening• 30” Chipper Rotor with 4 Knives at 197 lbs. • Electronic Feed Sensor, Hydraulic Feed Controller Unit• Dimensions (LxWxH): 148.5” x 64” x 100”• Weight 2225 lbs.• Highway Tire Size ST205/75R14• Built-in Tool Box• Electric Brakes (BXTR 6438P)• Auto Engage Centrifugal Clutch (BXTR 6438)• Auto Engage Fluid Coupler (BXTR 6438P)• Meets 2013 WorkSafeBC safety standards
BXTR HYDRAULIC ROLLER FEED TRAILER
34 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
HAND CART
Lightweight and portable, the BXMC is ideal for the small rural property. Powered by Subaru, it makes quick work of branches, brush and leaves.
STANDARD FEATURES
Non-deflating foam-filled rubber tires
211 CC Subaru Engine 5 Second Stop Brake Clutch
BXMC 32S
Exclusive Chop Block uses an anvil action to finely process material
• 211 CC Subaru SP210 Engine• 3.5” x 5” Chipper Housing Opening with 3” Cap.• 6” x 7” Shredder Housing Opening with ¾” Cap.• 16” Chipper Rotor with 2 Offset Knives at 40 lbs.• 12 Shredding Knives• Blower Discharge with Bag Included (2.7 cu ft)• Dimensions (LxWxH) 43” x 40” x 49”• 270 lbs. Total Weight• 4.10 x 3.5 Tire Size, Foam Filled
• 211 CC Subaru SP210 Engine• 3.5” x 5” Chipper Housing Opening with 3” Cap.• 6” x 7” Shredder Housing Opening with ¾” Cap.• 14” Chipper Rotor with 2 Offset Knives at 28 lbs.• 8 Shredding Knives• Screen Discharge with 1.5” Screen Included, Options
Available• Dimensions (LxWxH) 43” x 37” x 47”• 250 lbs. Total Weight• 4.10 x 3.5 Tire Size, Foam Filled
BXMC 32BBXMC 32s
Standard Screens:1.5” Round Screen (part# 1074L250)Optional Screen:0.75” Round Screen (part# 1071L240)1.5” Wet Screen (part# 1074L260)
Optional Trailer Hitch (Part# 1082A355)BXMC 32s & BXMC 32B
35Wallenstein 2014 Product Catalogue
CH
IPP
ER
S / S
HR
ED
DE
RS
BXMC 32S
SKIDSTEERGet the most out of your equipment with the practical BXH 42 Skidsteer Mounted Wood Chipper. The hydraulically driven BXH 42 is powered directly from the skidsteer’s external ports, providing plenty of chipping action.
Chipping RotorRated 1000 RPM @25gpm
Hardened Tool Steel Reversible Chipping Blades
Self Feeding Chipper Hopper
Chipper Driven by Skidsteer Hydraulics
360º Exit Chute for accurate chip placement
The BXH 42 is capable of chipping 4-inch diameter logs with its heavy-duty rotor and 2 hardened tool steel reversible cutting blades.
SKIDSTEER - The skidsteer mount makes the BXH 42 easy to attach so you can switch from a bucket to chipper quickly and easily.
STANDARD FEATURES
BXH 42
• Hydraulically powered • 4” x 10” Chipper Housing Opening• 25” Rotor with 2 Knives at 74 lbs.• 65” Discharge Hood Height• 740 lbs. Total Weight• Dimensions (LxWxH) 80” x 57” x 72”• 25gpm recommended flow• 20-30gpm flow range
BXH 42
BXMC CHIPPER / SHREDDERS & BXH CHIPPERS
36 Wallenstein 2014 Product Catalogue
CH
IPP
ER
S /
SH
RE
DD
ER
S
Reversible Rotor knife
Ledger Knife
Screens
Trailer Hitch
Mulch Collector Bag
Shredder Knife
Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA -RED -YEL
Colour Options
Ledger Knife Clearance Gauge
Fluid Coupler Kit
Electric Brake Kit
Self Contained PTO Power Pack
Part# Description
1056M303 • BX32, BXM32, BXMT32
1011M103 • BX42, BXT4213, BXT4224, BXM42, BXMT4224, BXMT4238
1012M203 • BX62, BXT6224, BXT6238
1019M903 • BX92
1053M303 • CR60, BXRT6438
C40002 • BX40, BXT4013
C30019 • BX60, BXR60, BXT5024
Part# Description
1056M304 • BX32, BXM32, BXMT32
1011M104 • BX42, BXT4213, BXT4224
1012M204 • BX62, BXT6224, BXT6238, CR60, BXTR6438
1019M904 • BX92
C40001 • BX40, BXT4013
C30017 • BX60, BXR60, BXT5024
Part# Description
1056M108 • BXM32, BXMT32
1016M608 • BXM42, BXMT4224
Part# Description
1082A355 • BXMC32S & BXMC32B
Part# Description
Z99006 • BXMC32B
Part# Description
1012L269 • for use on all Chippers
Part# Description
C200 • BXTR6438
Part# Description
C300 • BXTR6438 (2014 models and on)
Part# Description
C3540 • BX42R, BX64R, BX72R
C4550 • BX102R
Part# Description
1074L240 • 0.75” Round Screen• BXMC32S
1074L250 • 1.5” Round Screen• BXMC32S
1074L260 • 1.5” Wet Screen• BXMC32S
37Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
The WP Wood Processor improves productivity,
ergonomics and minimizes handling.
All you have to do is cut.
THE EASIEST WAY TO GET FROM LOG TO PILE
WP830Model Shown with optionalPivoting Chainsaw Arm(Chainsaw not included)
WP WOOD PROCESSOR
Part# Description
C3540 • BX42R, BX64R, BX72R
C4550 • BX102R
38 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
full-length logs using only a winch.
without heavy lifting.to length while standing straight.
HANDLE SPLIT AND STACKCUT
Processing up to 1.5 cords per hour
with only one person, the Wallenstein
WP Wood Processor saves you time,
and money while reducing the risk of
physical strain.
39Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
PHYSICAL STRAIN
COSTTIME
CUTS
CUTS CUTS
IS FOR:
Bringing firewood processing up to your level, the WP Wood Processor reduces unnecessary back strain by eliminating heavy lifting and bending while providing a comfortable cutting height. The ergonomic design allows you to work longer and more efficiently without the risk of personal injury.
Rentalincome.
Part-time firewood business.
High Volume firewood users.
No moreBENDING or LIFTING
Low Cost - High Volume Production
1
1
1
1.5 CORD / HOUR
Person
No Front End Loader Needed
No Log Deck Needed
No Conveyor Needed
Saw
WPUPTO
Limits SAW DAMAGE
WP WOOD PROCESSOR
40 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
WHY WALLENSTEIN?
• Winds Smoothly• No Kinks• No Coiling• No Slivers
EASY LOADING RAMP
WITH GRIPPING STABILIZERS
PULLING FORCE
SYNTHETIC ROPE
HIGH-STRENGTHMEMORY-FREE
HEAVYWEIGHT
LOG STABILIZER
NYLONCUTTING GUARDS
EASY REACHCONTROLS
ADJUSTABLE LOG LENGTH INDICATORFlexible guides give you the perfect cut, everytime.
Protects chainsaw teeth from getting damaged.
The stabilizer prevents the log from rolling
while you cut.
41Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
4-WAYWEDGE
6-WAYWEDGE
ADJUSTABLEOPTIONAL
ADJUSTABLEOFFLOAD CHUTE
54”UP TO
SPEED | POWER | VERSATILITY | RELIABILITY
When you purchase any new Wallenstein product, we’ve got you covered with our 3 Year Consumer Warranty.
GREAT PRODUCTSNOW WITH GREAT WARRANTY
For details, visit www.embmfg.com.
Control the size of firewood by raising the wedge with the
easy-to-use lever.
Pile it high, dump it into a trailer or keep the wood at waist level for easy stacking.
WP WOOD PROCESSOR
42 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
Series
3-POINT HITCHUsing the convenience of your tractor’s hydraulic system, the WP200 Series Wood Processor transfers your tractor’s horse power straight into wood processing power.
11Second
Average Full Stroke Cycle
3-Point Hitch Mount Cat I/IIHydraulic Power From TractorNo Dedicated Engine to Service
6-Way Wedge#P600
PTO Hydraulic Power Pack#P300
Nylon Chainsaw Holster#P100 (Chainsaw not included)
STANDARD FEATURESHands Free Return - Auto Neutral The splitter returns to the start position hands free and automatically switches from reverse to neutral. This allows you to cut the next block while the splitter is returning.
OPTIONAL FEATURES
43Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
• 45 hp Recommended Min. HP• 4.5” x 24” Cylinder Dia. / Stroke• 3PH Cat I/II Mounting• 12-18 gpm Recommended Hyd Flow• 15 gpm @ 540 rpm Optional Accessory Pump Kit• Hands Free Return - Auto Neutral• Full Stroke Cycle Time Per Tractor• 20 / 25 Ton Splitting Force @ 2550 / 3000 psi• 22” Max Split Length• 22” Max Log Diameter• Adjustable 4-way Wedge
• Adjustable 6-way Wedge Option• 60” Winching Strap Included (Part# Z92405)• 1450 lbs Weight• Dimensions (LxWxH) 210”x62”x72”• Folded Dimensions (LxWxH) 88” x 62” x 72”• Hydraulic Winch• 50’ Length Nylon Winch Cable• 2000 lbs Winch Pulling Force • 54” Height Max Discharge Chute
• 60 hp Recommended Min. Hp• 4.5” x 36” Cylinder Dia. / Stroke• 3PH Cat I/II Mounting• 12-18 gpm Recommended. Hyd Flow• 15 gpm @ 540 rpm Optional Accessory Pump Kit• Hands Free Return - Auto Neutral• Full Stroke Cycle Time Per Tractor• 20 / 25 Ton Splitting Force @ 2550 / 3000 psi• 34” Max Split Length• 22” Max Log Diameter• Adjustable 4-way Wedge
• Adjustable 6-way Wedge Option• 60” Winching Strap Included (Part# Z92405)• 1600 lbs Weight• Dimensions (LxWxH) 238”x62”x72”• Folded Dimensions (LxWxH) 115”x62”x72”• Hydraulic Winch• 50’ Length Nylon Winch Cable• 2000 lbs Winch Pulling Force• 54” Height Max Discharge Chute
WP 200 SERIES 3-POINT HITCH
WP 230 24” SPLIT OPENING WP 260 36” SPLIT OPENING
Log Peavey#Z99001
Firewood Bin#P500
Mesh Bag #Z99007
Pivoting Chainsaw Arm#P200 (Chainsaw not included)
4 Color OptionsRed, Orange, Green, Blue
44 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
Winch, block, split and pile your firewood without wasting time or breaking your back. Powered by a 265 CC Subaru engine, the WP630 Wood Processor offers 25 tons ofsplitting force and provides a comfortable working height for cutting andan integrated splitter with exit chute.
15Second
Average Full Stroke Cycle
5.30 x 12 Highway TiresSolid Axle Suspension
Hands Free Return - Auto NeutralThe splitter returns to the start position handsfree and automatically switches from reverse to neutral. This allows you to cut the next blockwhile the splitter is returning.
STANDARD FEATURES
Log Peavey#Z99001
6-Way Wedge#P600
Nylon Chainsaw Holster#P100 (Chainsaw not included)
TRAILER
OPTIONAL FEATURES
45Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
265 CC OVERHEAD CAM ENGINE
• Higher Performance• Easy Start• Low Noise• Lower Exhaust Emissions• Less Fuel Consumption
• 265 CC Subaru Engine, rope start• 16 gpm, 2 stage Hyd Flow• 4.5” x 24” Cylinder Diameter / Stroke• Auto Return Valve operation• 15 second Full Stroke Cycle Time • 25 Ton Splitting Force
• 22” Max Split Length• 22” Max Log Diameter• Adjustable 4-way Wedge• Adjustable 6-way Wedge Option• Solid Axle Suspension• 5.30 x 12 Tire Size
WP 630 SERIES TRAILER
WP 630 24” SPLIT OPENING• 2” Ball Coupler• 60” Winching Strap Included (Part# Z92405)• 1600 lbs Weight• Dimensions (LxWxH) 210”x62”x72”• Folded Dimensions (LxWxH) 122”x62”x72”• Hydraulic Winch
• 50’ Length Nylon Winch Cable• 2000 lbs Winch Pulling Force• 54” Height Max Discharge Chute
Firewood Bin#P500
Mesh Bag #Z99007
Pivoting Chainsaw Arm#P200 (Chainsaw not included)
4 Color OptionsRed, Orange, Green, Blue
46 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
With the ability to split logs up to 34”, a 404 CC Subaru engine and auto cycle valve operation, the WP800 Series of Wood Processors offer all the features andbenefits of the WP630 model while designedto handle higher volume and faster processing time.
Log Peavey#299001
6-Way Wedge#P600
Nylon Chainsaw Holster#P100
11OPTIONAL FEATURES
Series
TRAILER
Single Side ControlsIncluding Engine Start/Stop, Throttle and Hour Meter
Splitting is a one-step, hands free process that operates at the same time as you prepare the next block. Wallenstein’s Auto Cycle feature gives you single action control of splitting. Auto Cycle powers the log through the adjustable 4-way wedge and returns to the home position quickly, ready for the next log.
STANDARD FEATURES
SecondAverage Full Stroke Cycle
WP830(Chainsaw not included)
47Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
STANDARD FEATURES
• 404 CC Subaru Engine / electric start• 22 gpm, 2 stage Hydraulic Flow• 4.5” x 24” Cylinder Dia. / Stroke• Auto Return Valve operation• 11 second Full Stroke Cycle Time• 25 Ton Splitting Force• 22” Max Split Length• 22” Max Log Diameter• Adjustable 4-way Wedge• Adjustable 6-way Wedge Option• Torflex® Suspension• 5.30 x 12 Tire Size
• 2” Ball Coupler• 60” Winching Strap Included
(Part# Z92405)• Highway Signal Lights• 1840 lbs Weight• Dimensions (LxWxH)
210” x 62” x 72”• Folded Dimensions (LxWxH)
122” x 62” x 72”• Hydraulic Winch • 50’ Length Nylon Winch Cable• 2000 lbs Winch Pulling Force• 54” Height Max Discharge Chute
• 404 CC Subaru Engine / electric start• 22 gpm, 2 stage Hydraulic Flow• 4.5” x 36” Cylinder Diameter / Stroke• Auto Return Valve operation• 16 second Full Stroke Cycle Time• 25 Ton Splitting Force• 34” Max Split Length• 22” Max Log Diameter• Adjustable 4-way Wedge• Adjustable 6-way Wedge Option• Torflex® Suspension• 5.30 x 12 Tire Size
• 2” Ball Coupler• 60” Winching Strap Included
(Part# Z92405)• Highway Signal Lights• 1970 lbs Weight• Dimensions (LxWxH)
238” x 62” x 72”• Folded Dimensions (LxWxH)
150” x 62” x 72”• Hydraulic Winch • 50’ Length Nylon Winch Cable• 2000 lbs Winch Pulling Force• 54” Height Max Discharge Chute
TORFLEX®
Rubber Torsion Suspension Axles and 5.30 x 12 Highway Tires
Highway Signal Lights and Fender Kit
Subaru® Electric Start404 CC Overhead Cam Engine
Shown with optional Pivoting Chainsaw Arm
Firewood Bin#P500
Mesh Bag #Z99007
Pivoting Chainsaw Arm#P200
4 Color OptionsRed, Orange, Green, Blue
(Chainsaw not included)
WP 830 24” SPLIT OPENING WP 860 36” SPLIT OPENING
WP 800 SERIES TRAILER
48 Wallenstein 2014 Product Catalogue
WO
OD
PR
OC
ES
SO
RS
48” Log Peavey
Nylon Chainsaw Holder
Pivoting Chainsaw Holder
6 Way Wedge
Synthetic Winch Rope
60” Winching Strap
PTO Powerpak
Closed Center Valve
Firewood Mesh Bag and Frame
Options
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA -RED
Part# Description
Z99001 • Works with all your log handling duties
Part# Description
Z92405 • For all WP Models
Part# Description
P300 • For WP200 Series
Part# Description
P400 • For WP200 Series
Part# Description
P100 • Fits all models
Part# Description
P200 • WP Seies Wood Processors
Part# Description
P600 • Fits all Models
Part# Description
Z92112 • Synthetic Winch Rope 1/4 x 50’ with Hook
Part# Description
Z99007 • Firewood Mesh Bag
P500 • Firewood Mesh Bag Frame
SK
IDD
ING
WIN
CH
49Wallenstein 2014 Product Catalogue
PULL IT ALL TOGETHER
SKIDDING WINCHSKIDDING PLATE
From forest to fireplace, Wallenstein
provides heavy duty equipment that’s
ready for all your woodlot needs.
FX SKIDDING WINCH
SK
IDD
ING
WIN
CH
50 Wallenstein 2014 Product Catalogue
At the end of the winch cable are two keyhole sliders that slide along the cable. Keyhole sliders and choker chains are ideal for winching multiple logs together, saving you time and energy.
The FX Skidding Winch now only requires 2 Choker Chains. The crimped plug end fastens in the key hole slider allowing it to be used as the third choker chain.
YOU’VE GOT
PULL.
KEYHOLE SLIDERSWINCH CABLE END
WALLENSTEIN FX SKIDDING WINCHManaging the full potential of your forest is easy with the pulling strength of Wallenstein’s FX Skidding Winch. You can now reach the trees you need to cut, even on steep hills or swampland without the need for large heavy equipment. The FX Skidding Winch is the ideal tractor attachment for gathering firewood, clearing dead trees and harvesting premium lumber all while preserving your woodlot.
With pulling power up to 12,000 lbs* and cable length of 165 feet, the FX Skidding Winch is designed for your woodlot. The entire winch system is easy-to-use with many features built for rugged durability and practical operation.
Using a skidding winch is also easier on your tractor by transferring the pulling strain onto the ground with the large blade that anchors the winch.
The Wallenstein FX Skidding Winch comes in three sizes to suit your tractor. Get more out of your woodlot with the Wallenstein FX Skidding Winch without the wear and tear on you, your woodlot or your tractor.
All FX skidding winches come standard with a safety screen for optimal operator and tractor protection.
SAFETY SCREEN
The winch cable runs through an upper and lower snatchblock for a more efficient and safer pull. The top pulley provides a high entry point, forcing down-pressure onto the blade and lifting the logs.
SNATCHBLOCK PULLEY SYSTEM
STANDARD FEATURES
SK
IDD
ING
WIN
CH
51Wallenstein 2014 Product Catalogue
SKIDDING REMOTE CONTROL
For easy, efficient operation, all FX Skidding Winch models are available with a remote control option. Get full functionality from where ever you’re standing.
The clutch assembly transfers power from your tractor’s PTO into powerful winching action that’s ready to pull 12,000 lbs* up the steepest hill. The entire clutch assembly is also easily removable for servicing.
The sturdy towing bar secures multiple chained logs for safe traveling out of the forest.
REMOVABLE CLUTCH ASSEMBLY COLORS AVAILABLE
All models of the FX Skidding Winch are available in your choice of 4 colors.*Colors may not be exactly as shown
OPTIONAL FEATURES
FX SKIDDING WINCH
FX120/FX120R FX90/FX90R FX65/FX65R
• 12,000 lb Pulling Capacity• 60 - 100 Recommended HP• Category 1 & 2 3PH Mount• 540 RPM Max PTO Input Speed• 75-175 ft./min. Cable Speed at 540 RPM• 165’ of 1/2” Cable• Mechanical, Dry Disk Clutch• Weight: 898 lbs• Height: 67”• Width: 58.5”• Optional Bolt-On Remote Control Kit (Part# F200)• FX120R Includes Factory Installed Remote Control Kit **
** Remote kit requires 12V from tractor, 1-2 GPM hydraulic flow from tractor. The winch is pre-set at 700 psi
• 9,000 lb Pulling Capacity• 30 - 80 Recommended HP• Category 1 & 2 3PH Mount• 540 RPM Max PTO Input Speed• 75-175 ft./min. Cable Speed at 540 RPM• 165’ of 7/16” Cable• Mechanical, Dry Disk Clutch• Weight: 795 lbs• Height: 63”• Width: 50.5”• Optional Bolt-On Remote Control Kit (Part# F200)• FX90R Includes Factory Installed Remote Control Kit **
• 6,500 lb Pulling Capacity• 17 - 45 Recommended HP• Category 1 3PH Mount• 540 RPM Max PTO Input Speed• 75-175 ft./min. Cable Speed at 540 RPM• 165’ of 3/8” Cable• Mechanical, Dry Disk Clutch• Weight: 470 lbs• Height: 53”• Width: 40”• Optional Bolt-On Remote Control Kit (Part# F200)• FX65R Includes Factory Installed Remote Control Kit **
*30 HP required to pull 6,500 lbs
*FX120 model only
SK
IDD
ING
WIN
CH
52 Wallenstein 2014 Product Catalogue
OPTIONAL FEATURES
Choker ChainsLog Tongs
STANDARD FEATURES
Removable Hitch
Four Chain Holder Slots
Capable of handling multiple logs at one time, the FXP reduces the drag surface by lifting the front end of the logs. This gives you better control when turning, as the log acts like a trailer. The optional Choker Chains and Log Tongs are both ideal tools for quick hookup.
• Cat. 1, 3 PH Mounting • 1 Saddle Grab Hooks• 2” Receiver for Ball Mount Towbar• Weight 98 lbs. (Uncrated)• Dimensions: Uncrated (LxWxH) 35” x 12” x 32” Crated (LxWxH) 38” x 32” x 18”• Up to 40 hp Recommended Range
• Cat. 1 & 2, 3 PH Mounting • 2 Saddle Grab Hooks• 2” Receiver for Ball Mount Towbar• Weight 216 lbs. (Uncrated)• Dimensions: Uncrated (LxWxH) 44” x 25” x 44” Crated (LxWxH) 44” x 25” x 44”• Up to 80 hp Recommended Range
Colors Available
FX SKIDDING PLATE
Remote Control Winch Kit
Self Releasing Snatch Block
Logging Tongs
Choker Chain
Skidding Winch & Skidding Plate Options
Colour Options
When ordering, please use 3 letter colour designation behind models-BLU -GRN -ORA -RED
Part# Description
Z99003 • Opens to approx 26 inches• for use with skidding blade only
Part# Description
LW9101 v 90” choker chain with sliding hook
Part# Description
F200 • F200 Remote Control Transmitter range = 300ft (100 metres)
• Remote requires 12 volts and 1-2 g.p.m. Hydraulic flow from tractor
Part# Description
5089A100 • Helps with winching duties
LOG
GR
AP
PLE
53Wallenstein 2014 Product Catalogue
LX 5200
LX LOG GRAPPLE
LOG
GR
AP
PLE
54 Wallenstein 2014 Product Catalogue
SKIDSTEERLOG GRAPPLE Leverage your load without losing
control using the serrated cradle that steadies the logs in-line for straight-on loading or transport.
CANTILEVER CRADLEBYPASS GRAPPLE
360° HYDRAULIC GRAPPLE ROTATION
SPRING CENTERED GRAPPLE WITH LOCKING POSITIONS
Spring Centered Return
Lateral Lock In-line Lock
Thick or thin, the grapple’s tines fold together holding tight anything from 3 inches to 38 inches in diameter.
AVAILABLE COLORSAll Skid Steer models are available in your choice of 6 colors*.*Colors may not be exactly as shown
SKID STEER LOG GRAPPLE
• LxWxH: 48” x 48” x 41”• Weight: 470 lbs• Grapple Rotation: 360° Continuous Hydraulic• Grapple Opening: 3” - 38”• Mounting: Standard Skid Steer Quick Attach• Lifting Capacity: 1500 lbs
• LxWxH: 46” x 48” x 40”• Weight: 477 lbs• Grapple Rotation: 180° Spring Center• Grapple Opening: 3” - 38”• Mounting: Standard Skid Steer Quick Attach• Lifting Capacity: 1500 lbs
LX 5300 LOG GRAPPLE LX 5200 LOG GRAPPLE
LOG
GR
AP
PLE
55Wallenstein 2014 Product Catalogue
3PHTHREE POINT HITCH
LOG GRAPPLE
BYPASS GRAPPLE
TURN THE CORNER ON LOG HANDLING
SPRING-CENTERED BYPASS GRAPPLE
To get ahead you have to cut corners, except with the flexible Wallenstein three-point hitch log grapple for compact tractors. The spring-loaded swivel grapple makes sure your logs follow you home around every bend and turn in your woodlot. The LX 5100 also reduces damage to your trails and logs by lifting the front end off the ground. This eliminates deep ruts and minimizes surface contact to the end of the log. So, pull it all together with the most efficient way of forwarding logs out of your forest using a compact tractor.
AVAILABLE COLORSAll 3PH models are available in your choice of 5 colors*.*Colors may not be exactly as shown
3-POINT HITCH LOG GRAPPLE
• LxWxH: 41” x 29” x 32”• Weight: 275 lbs• Grapple Rotation: 180° Spring Center• Grapple Opening: 3” - 38”• 3 Point Hitch Category: Category 1• Rec. Tractor Size: 20 - 45 HP• Boom Lifting Capacity: 1500 lbs
LX 5100 LOG GRAPPLE
LOG
GR
AP
PLE
56 Wallenstein 2014 Product Catalogue
When all you need is a boom grapple, the L400 is Wallenstein’s Category II, 3PH tractor mount for grapples.
The L400 provides a stable base for log handling,backhoe digging and rotary auger drilling using either the LX95 or LX115 grapple.
Connected to your tractor’s 3PH using specially designed adapter, the boom’s lifting weight is transferred to the ground through the hydraulic stabilizers.
3PHTHREE POINT HITCH
MOUNT
• Recommended HP: 40 HP• Maximum Reach: 9’ 5”• Includes L101 Hydraulic Tractor Kit
• Recommended HP: 60 HP• Maximum Reach: 11’ 6”• Includes L101 Hydraulic Tractor Kit
L400 3PH MOUNT
Log Grapple Options
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA -RED -YEL -BLK
TIM
BE
R TA
LON
57Wallenstein 2014 Product Catalogue
LX/LT LOG GRAPPLE TRAILERS
TIM
BE
R T
ALO
N
58 Wallenstein 2014 Product Catalogue
Start finishing your to-do list with the highly versatile Wallenstein Timber Talon. For rural property owners with woodlots, the Timber Talon is incredibly useful, offering handy ways to make the most use of the same trailer.
Designed for ease of use and built for rugged durability, the Timber Talon is made in Canada and includes a 3-year warranty.
Explore the wide range of features and options that make the Timber Talon the right tool for the many jobs around your property.
Small and large logs stay tight with the pass-through tines.
If bumped, the log posts naturally return to their proper position.
TIM
BE
R TA
LON
59Wallenstein 2014 Product Catalogue
Trenches and holes are quickly dug with bucketattachments available in sizes (inches): 9, 12, 15, 18
Hydraulically powered rotary drive accepts auger diameters of 6” and 9” with a depth of 42”.
Wire mesh deck is perfect forcarrying almost anything.
Handling and unloading materials with thedump body is usefulfor almost limitless applications.
LX/LT LOG GRAPPLE TRAILERS
TIM
BE
R T
ALO
N
60 Wallenstein 2014 Product Catalogue
Wallenstein Timber Talon is loaded with features and options designed to give you the trailer that works best for you. Check out the standard features and explore the useful components for added flexibility.
270° Boom swing range
Safety Zone 5 Stick Swivel Controls Hydraulic Stabilizers Walking Beam Axle Clevis Hitch
Separate grapple and stabilizer levers isolate the boom controls for safe operation.
Creates a wider base for greater stability
Smoothly travel over uneven terrain.
Allows for full independant movement from the towvehicle.
RedBlue
Green Orange
Yellow
OPERATORSAFETYZONE
270°REACH
TIM
BE
R TA
LON
61Wallenstein 2014 Product Catalogue
For frequent road travel, the highway package offers valuable features for safety and durability. See model pages for specifications.
Pull logs deep out of the woods with the available synthetic rope, 2-speed hydraulic winch.
Signal Lights Highway Tires Ball Hitch Brakes
LX/LT LOG GRAPPLE TRAILERS
TIM
BE
R T
ALO
N
62 Wallenstein 2014 Product Catalogue
Big on payload, lift capacity and reach, the Timber Talon LX95/LT30 is the ultimate trailer for larger all terrain vehicles.
Recommended for use with minimum 600cc ATVs, Side-by-sides or 30hp compact tractors.
Check your machine’s owner’s manual to confirm maximum towing capacity.
27 x 10.5 x 15 - 8 Ply
TIM
BE
R TA
LON
63Wallenstein 2014 Product Catalogue
• Off road tires: 27 x 10.5 x 15 - 8 Ply• Clevis Hitch
• Ship Weight: 780 lbs
• Maximum Lift Capacity: 800 lbs
• Maximum Reach: 9’6”
• Vertical Reach: 15’ (Ground to Grapple Knuckle)
• Grapple Rotation: 360°
• Boom Rotation: 270°
• Grapple Opening: 3” - 30”
• Stabilizer Width: 7’ 5”
• Recommended Hydraulic Flow: 1-2 GPM
• Dipper & Grapple Cylinders: 2.5”
• Main Boom Cylinder: 2.5”
• Stabilizer Cylinder: 2”
• Ship Weight: 900 lbs
• Includes all LX95 standard features
• Factory installed hydraulic winch
• Includes required hydraulic valving platform
• 50’ Synthetic Rope • 2 Speed
• Dump Box - 25 cu ft
• Expanded metal flat bed: 9’ x 5’
• L101 Tractor Hydraulic Kit
• L301 169 CC Subaru Power Pack
• Hydraulic 2 Speed Winch
• Backhoe Bucket Sizes: 9”, 12”,15”, 18”
• Auger Sizes: 6”, 9”
• Ship Weight: 895 lbs
• Includes all LX95 standard features
• Factory installed hydraulic winch
• 50’ Synthetic Rope • 2 Speed
• Trailer Bed Length: 96”
• Dimensions: (LxWxH) 161”x64”x58”
• Tongue Weight:
Tandem Position: Front (Grapple Only) 200 lbs (Grapple & Power Pack) 250 lbs
Tandem Position: Back (Grapple Only) 465 lbs (Grapple & Power Pack) 515 lbs
• Trailer Weight: (GVW) 849 lbs
• Ground Clearance: 14”
• Standard Mounting for LX95 Grapple/Power Pack
• 3 Position Manual Tandem Axle Adjustment
• Walking Beam Axles
• 8 Removable Self centering Bunk Posts
• Integrated Safety Back Guard
• Clevis Hitch
• Off road tires: 27 x 10.5 x 15 - 8 Ply• Clevis Hitch• Hydraulic sliding axle• Surge brakes*Check manual to confirm maximum towing capacity
• Highway tires: ST205-75R14 LRC• Signal lights• Surge brakes• 2” Ball hitch
• Highway tires: ST205-75R14 LRC• Signal lights• Surge brakes• 2” Ball hitch• Hydraulic sliding axle
Ideal for ATV users, the hydraulic sliding axle allows the trailer weight to be shifted towards the tongue for better traction or remain balanced under the axle.
The hydraulic brakes automatically engage if the trailer begins to surge forward, such as traveling downhill or slowing.
Ready to work without relying on auxiliary hydraulics, the Timber Talon is available with a Subaru 169 CC engine, hydraulic reservoir, hydraulic pump, and hoses.
• 42” Hole Depth
• 34” Digging Depth (24” Flat Bottom)
• Up to 9” in Diameter
OFF ROAD
HIGHWAY PACKAGE
HIGHWAY PACKAGEHYDRAULIC AXLE
ATV PACKAGEOFFROAD *
LX95/LT30 LOG GRAPPLE TRAILERS
TIM
BE
R T
ALO
N
64 Wallenstein 2014 Product Catalogue
With greater capacity, the Timber Talon LX115/LT60 is a robust trailer ideal for 45hp compact tractors and full size pickup trucks.
Off-road or highway, this trailer is the perfect companion for hauling logs, transporting cargo or light excavation work.
11l15 x 15 x 8 - 12 Ply
TIM
BE
R TA
LON
65Wallenstein 2014 Product Catalogue
• Ship Weight: 1075 lbs• Maximum Lift Capacity
1200 lbs• Maximum Reach 11’6”• Grapple Rotation: 360°• Boom Rotation: 270°• Grapple Opening: 3” - 38”• Stabilizer Width: 8’ 11”• Recommended Hydraulic
Flow 4-6 GPM• Dipper & Grapple Cylinders: 2.5”• Main Boom Cylinder: 3”• Stabilizer Cylinder: 2”
• Trailer Bed Length: 132”
• Dimensions: (LxWxH) 198”x68”x60”
• Tongue Weight: (Grapple Only) 480 lbs
• Trailer Weight: (GVW) 1269 lbs
• Ground Clearance: 17”
• Standard Mounting for LX115 Grapple/Power Pack
• Walking Beam Axles
• 8 Removable Self centering Bunk Posts
• Integrated Safety Back Guard
• Clevis Hitch
• 10,000 lb Load Capacity• Offroad Tires: 11L15 x 15 x 8 - 12 Ply• Walking Beam Axle
• 11,500 lb Load Capacity• Highway Tires: ST235-80R16 LRE • Signal Lights• 2-5/16” Ball Hitch• 4 Wheel Electric Brakes
HIGHWAY PACKAGE
OFFROAD
Ready to work without relying on auxiliary hydraulics, the Timber Talon is available with a Subaru 265 CC engine, hydraulic reservoir, hydraulic pump and hoses.
Full size electric drum brakes control the trailer for safe highway travel.
Easily navigate through narrow trails with the optional hydraulic articulated draw bar giving you a tighter turning radius.
• 42” Hole Depth
• 41” Digging Depth (24” Flat Bottom)
• Up to 9” in Diameter
• Dump Box: 25 cu ft• Expanded metal
flat bed: 9’ x 5’• Hydraulic Articulating
Draw Bar
• L101 Tractor Hydraulic Kit
• L601 265 CC Subaru Power Pack
• 2 Speed Hydraulic Winch
• Backhoe Bucket Sizes: 9”, 12”,15”, 18”
• Auger Sizes: 6”, 9”
• Ship Weight: 1200 lbs
• Includes all LX115 standard features
• Factory installed hydraulic winch
• 80’ Synthetic Rope • 2 Speed
LX115/LT60 LOG GRAPPLE TRAILERS
TIM
BE
R T
ALO
N
66 Wallenstein 2014 Product Catalogue
When all you need is a boom grapple, the L400 is Wallenstein’s Category II 3PH tractor mount for grapples.
The L400 provides a stable base for log handling, backhoe digging and rotary auger drilling using either the LX95 or LX115 grapple.
Connected to your tractor’s 3PH using a specially designed adapter, the boom’s lifting weight is transferred to the ground through the hydraulic stabilizers.
TIM
BE
R TA
LON
67Wallenstein 2014 Product Catalogue
• Recommended HP: 40 HP• Maximum Reach: 9’ 5”• Includes L101 Hydraulic Tractor Kit
• Recommended HP: 60 HP• Maximum Reach: 11’ 6”• Includes L101 Hydraulic Tractor Kit
L400 3PH MOUNT
TIM
BE
R T
ALO
N
68 Wallenstein 2014 Product Catalogue
Options
Models
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA
-RED -YEL
Off Road Trailer Packages Highway Trailer Packages
3PH Grapple Packages
Package# Description Part#
A • Off Road Tires: 27 x 10.5 x 15 - 8 Ply• Standard Grapple
LT30LX95
B • Highway Tires: ST205-75R14 LRC• Standard Grapple
LT30HLX95
C • Off Road Tires: 27 x 10.5 x 15 - 8 Ply• Hydraulic Sliding Axle• Standard Grapple
LT30ALX95
D • Highway Tires: ST205-75R14 LRC• Hydraulic Sliding Axle• Standard Grapple
LT30HALX95
E • Off Road Tires: 27 x 10.5 x 15 - 8 Ply• Grapple with Hydraulic Valving Platform
LT30LX95PW
F • Highway Tires: ST205-75R14 LRC• Grapple with Hydraulic Valving Platform
LT30HLX95PW
G • Off Road Tires: 27 x 10.5 x 15 - 8 Ply• Hydraulic Sliding Axle• Grapple with Hydraulic Winch
LT30ALX95W
H • Highway Tires: ST205-75R14 LRC• Hydraulic Sliding Axle• Grapple with Hydraulic Winch
LT30HALX95W
Package# Description Part#
A • Off Road Tires: 11L15 x 15 x 8 - 12 Ply• Standard Grapple
LT60LX115
B • Highway Tires: ST235-80R16 LRE• Standard Grapple
LT60HLX115
C • Off Road Tires: 11L15 x 15 x 8 - 12 Ply• Grapple with Hydraulic Winch
LT60LX115W
D • Highway Tires: ST235-80R16 LRE• Grapple with Hydraulic Winch
LT60HLX115W
Package# Description Part#
A • 3PH & Grapple L400LX95
B • 3PH & Grapple with Winch L400LX95W
C • 3PH & Grapple L400LX115
D • 3PH & Grapple with Winch L400LX115W
Dump Box
Subaru Powerpak
Pintle Hitch Kit
Articulating Tongue Kit
Backhoe Kit
Auger Kit
3 PH Hitch AdaptorBucket
Replacement Parts
Flat Bed Kit
Tractor Hydraulic Kit
Part# Description
L310 • LX95/LT30
L620 • LX115/LT60
Part# Description
L330 • LX95/LT30
L630 • LX115/LT60
Part# Description
L101 • LX95/LT30, LX115/LT60
Part# Description
L640 • LX115/LT60
Part# Description
L650 • LX115/LT60
Part# Description
L400 • Cat 2, includes flow divider, connections and hoses
• LX95, LX115
Part# Description
BA201 • LX95, LX115
Part# Description
LA610 • 6” Diameter Auger Kit• LX95, LX115
LA910 • 9” Diameter Auger Kit• LX95, LX115
Part# Description
L301 • 6.0 Subaru Powerpak• LX95/LT30
L601 • 9.0 Subaru Powerpak• LX115/LT60
Part# Description
BK2690 • 9” Bucket• 3 Teeth
BK2612 • 12” Bucket• 3 Teeth
BK2615 • 15” Bucket• 4 Teeth
BK2618 • 18” Bucket• 4 Teeth
Part# Description
Z54107 • Hydraulic Rotator• 360 Degree
6011A101 • Log grapple• 3” to 30” opening• high tensile steel construction
6012A201 • Log grapple• 3” to 38” opening• high tensile steel construction
6012A215 • Log grapple• 3” to 38” opening• high tensile steel construction• Fits LX115
6014A100 • Log grapple• 3” to 27.5” opening• high tensile steel construction• Fits LX95
BA
CK
HO
ES
69Wallenstein 2014 Product Catalogue
BREAK GROUND,NOT YOUR BACK
When it comes to landscaping
and excavating, start the job right
with the Wallenstein Ranchho, the
backhoe attachment that digs deeper
and reaches further.
RANCHHO GX BACKHOES
Package# Description Part#
A • Off Road Tires: 11L15 x 15 x 8 - 12 Ply• Standard Grapple
LT60LX115
B • Highway Tires: ST235-80R16 LRE• Standard Grapple
LT60HLX115
C • Off Road Tires: 11L15 x 15 x 8 - 12 Ply• Grapple with Hydraulic Winch
LT60LX115W
D • Highway Tires: ST235-80R16 LRE• Grapple with Hydraulic Winch
LT60HLX115W
Package# Description Part#
A • 3PH & Grapple L400LX95
B • 3PH & Grapple with Winch L400LX95W
C • 3PH & Grapple L400LX115
D • 3PH & Grapple with Winch L400LX115W
Part# Description
BA201 • LX95, LX115
Part# Description
LA610 • 6” Diameter Auger Kit• LX95, LX115
LA910 • 9” Diameter Auger Kit• LX95, LX115
BA
CK
HO
E
70 Wallenstein 2014 Product Catalogue
CURVED BOOMThe right geometry makes
the job easier with the over-arch-ing design of the new curved boom.
Dig deep without impacting the edge of the excavation. This protects the back-
hoe from unnecessary damage and prevents ground from falling back into the hole.
GREASABLE PINS p
PICK A COLOUR qRed, Blue,Orange,Green,andBlack.
Designed for compact tractors, skidsteers and full-size tractors, the Ranchho gives you precision and power at your fingertips. The versatile curved-boom backhoe attachment that fits your tractor and your property. The Ranchho is a rugged backhoe that’s ready to sink its teeth into any task you give it, from landscaping to concrete footings.
SWING CUSHIONINGWorking efficiently means working smoothly, digging and swinging in rhythm. Swinging the boom is controlled by cushioning hydraulic cylinders that reduce machine shake by slowing the boom as it reaches the furthest ends of the swing range.
SUBFRAME MOUNTINGThe two-part 4-point model specific subframe system absorbs the stress of heavy lifting. For a list of available applications visitwww.embmfg.com.
3-POINT HITCHTurn your tractor into a backhoe
with the simple 3-point hitch mount. The 3-point hitch also utilizes your
tractor’s draw bar forincreased rigidity.
HYDRAULICPOWER PACKThe optional self-contained PTO pumpkit provides hydraulic power for tractors without available auxiliary power.
SKIDSTEER MOUNTThe universal skidsteer mount
connects easily to most skidsteers. The model-specific tieback kit ties
the backhoe to the skidsteer, relieving stress on the bucket cylinders.
Visit www.embmfg.com for a list of available tieback applications.
Skidsteer tieback kit
BA
CK
HO
ES
71Wallenstein 2014 Product Catalogue
For mid-size tractors between 35-70HP, the Ranchho GX720 makes its mark. Digging down 7-feet deep and reaching 10-feet across, the GX720 breaks ground and keeps on going. With the excavator-style curved boom and easy to use
controls, the GX720 is ready to handle any ground conditions
from topsoil to clay and
gravel.The Ranchho GX620
is designed for subcompact tractors. With a digging depth of 6-feet and a 9-foot reach,
the GX620 gets down and dirty, breaking the frostline and finishing the job quickly.
The Ranchho is the perfect attachment for your tractor that gets the most out of your land. Landscaping, excavating and trenching soon become easy tasks with the digging power and reaching length of the Ranchho. Add a thumb to the Ranchho and start moving rocks into perfect position for your landscaping projects. For smaller tractors without hydraulics, the optional power pack gets you digging.
CONTROLS - Take hold of the controls and start digging with the easy-to-use joystick-style levers. Dig deep and curl the bucket at the same time with the four-way
controls that operate the boom,
stick and bucket. Each stabilizer is
lever-controlled as well.
DUAL CYLINDER BOOM PIVOTAll Ranchho models, including the GX620, use two hydraulic cylinders
to control the boom swing. The dual cylinders provide strong,
consistent movement throughout the entire 180-degree swing range.
6’4”/7’8”
GX620100”
GX720123”
RANCHHO GX BACKHOES
GX 620 GX 720
BA
CK
HO
E
72 Wallenstein 2014 Product Catalogue
For contractors and landscapers that need to dig deep, but not in their pockets, the Ranchho GX920 makes the grade. The large GX920 extends the usefulness of 60-90HP tractors with digging capabilities of 9-feet deep. Trenching for footings and excavating to spec becomes quick and easy
without the added expense of a single-purpose excavator. The digging bucket is built using AR400-strength steel, ensuring rugged longevity.
The GX920provides a
2-foot flat bottom at the maximum digging depth.
The Ranchho can be mounted on a subframe,
3-point hitch or skidsteer. All are
easy to disconnect and re-attach on
the go without wasting time.
9’4” GX920141”
BUSHINGSHardened steel bushings are installed on all the main pivot points of the GX720 and GX920, including swing, boom, dipper and bucket. High quality bushings add life to the Ranchho by reducing the wear and tear as you dig and swing.
GX 920
BA
CK
HO
ES
73Wallenstein 2014 Product Catalogue
The GX920XTextends an extra24” and provides
a 2-foot flat bottom atthe maximum digging depth.
11’4”GX920XT164”
EXTENDIBLE GX920XT BACKHOEThe Wallenstein Ranchho digs even deeper with the Extendible GX920XT model. Capable of hydraulically extending an extra 24” to dig 11’ 4” deep, the extendible dipper stick gives you the extra reach when you need it. When contracted, the bucket and dipper
stick curl up tight to the boom for easy travel and compact storage.
RANCHHO GX BACKHOES
GX 920XT
BA
CK
HO
E
74 Wallenstein 2014 Product Catalogue
BE UPFRONT ABOUT YOUR INTENTIONS WITH THE WALLENSTEIN RANCHHO
WITH SKIDSTEER MOUNT.
The Ranchho connects just like a bucket, and with added stabilizer bars for reduced shake. Just like the 3-point hitch models, the hydraulic controls hook into the skidsteer’s external ports, making setup simple. The stabilizers widen the centre of gravity, making the narrow profile of skidsteers more sturdy when swinging the boom laterally. The thumb attachment is also available for both 3-point hitch and skidsteer mounted backhoes.
QUICK ATTACHBUCKET ADAPTER
From digging to ditching, Wallenstein’s Quick Attach Bucket Adapter switches attachments quickly and
easily with only one bolt and no hammering of pins. The mechanical pin-grab coupler slides under the front pin and tightens around the rear pin, saving
you time and hassle so you can get the job done. The Quick Attach Adapter is easy to install in the field on
the GX720 and GX920.
DET
AC
H
AT
TAC
H
QC 500
BA
CK
HO
ES
75Wallenstein 2014 Product Catalogue
SKID DIGGER QC620 - When you need to get down to work, start digging with the
Ranchho QC620. This skidsteer-mounted backhoe is a single-stick that reaches 6-feet deep and is controlled from inside the cab. The QC620 keeps you trenching without the need of continually repositioning.
THE HYDRAULICALLY
TILTING BUCKET EASILY SCOOPS UP A FULL LOAD, MAKING
QUICK WORK OF DIGGING.
The Hydraulic Thumb is the most flex-ible way to grab hold of different sized objects and place them where you want them. The hydraulic thumb also allows you to tilt the load as you position it for perfect placement. When the thumb is not needed, it neatly tucks against the stick. (Available on 720/920 only, n/a on 920XT)
The Mechanical Thumb attaches
to the stick and has 5 different positions you set
using a pin. Using the mechanical
thumb allows you to better control
material that is difficult to scoop or place with
precision. (Available on all models except 920XT)
THUMBSLandscaping requires versatility & precisionwhen positioning rockery. The Ranch-ho Thumbs give you the control to move heavy objects with delicacy, placing rocks in exactly the right place and with less scratching. Thumbs are also ideal for gath-ering awkward debris such as scrap wood
and concrete chunks that don’t easily fit
into a bucket. Wal-lenstein provides 2 types of thumbs for the Ranchho, hydrau-lic and mechanical.
RANCHHO QC BACKHOES
QC 620
BA
CK
HO
E
76 Wallenstein 2014 Product Catalogue
* in
acc
ord
ance
wit
h S
AE
J117
9 st
and
ard
SPECIFICATIONS GX620 GX720 GX920 GX920XTA Transport Height (with boom fully retracted) 63” 79” 92” 92”
Transport Width (with stabilizers up) 40” 42½” 42½” 42½”
Loading Height (bucket at 60° rotation) 62” 80” 89” 89”/104”
B Ground Clearance 10½” 10½” 10½” 10½”
C Transport Length 68” 80” 81” 81”
Transport Weight (base unit only - no bucket or mounts) 575 lbs. 765 lbs. 791 lbs. 980 lbs.
D Digging Depth (2 ft. flat bottom) 6’4” 7’8” 9’4” 9’4”/11’4”
E Overall Operating Height (fully raised) 92” 119” 135” 135”/152”
F Reach from Swing Post 100” 123” 141” 141”/164”
G Bucket Rotation 180° 180° 180° 180°
Swing Arc 180° 180° 180° 180°
Stabilizer Width (Spread) 74” 89” 89” 89”
Stabilizer Width (Transport) 40” 42½” 42½” 42½”
Operating Pressure 1800 psi 2250 psi 2250 psi 2250 psi
SAE* Dipper Boom Digging Force 1250 lbs. 2300 lbs. 3200 lbs. 3100/2200 lbs.
SAE* Bucket Digging Force 2600 lbs. 3800 lbs. 3925 lbs. 3925 lbs.
Boom Lift Capacity (end of dipper 3’ from ground) 385 lbs. 925 lbs. 750 lbs. 710/580 lbs.
Hydraulic Volume Requirements 5-7 gpm* 5-7 gpm* 5-7 gpm* 5-7 gpm*
Recommended Tractor HP 15-25 HP 22-45 HP 45-100 HP 45-100 HP
Recommended Skidsteer Requirements (SSQT) Mini Skidsteer 30-60 30-100 30-100
Main Boom Cylinder Diameter 2½” 3” 3” 3”
All Other Cylinder Diameters 2¼”, 2” (stabs, swing)
3” (dipper), 2½” 3” (dipper), 2½” 3” (dipper),
2½” (15/8 extend)
Bucket Sizes Available 9, 12, 15, 18 9, 12, 15, 18, 24 9, 12, 15, 18, 24 9, 12, 15, 18, 24
3 Point Hitch Cat I (PT300) Cat I (PT300)/Cat II (PT322) Cat I (PT300)/Cat II (PT322) Cat I (PT300)/Cat II (PT322)
*Equipment with higher GPM require Flow Divider Kit (#BFC501)
BA
CK
HO
ES
77Wallenstein 2014 Product Catalogue
Options
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA
-RED -BLK
SPECIFICATIONS GX620 GX720 GX920 GX920XTA Transport Height (with boom fully retracted) 63” 79” 92” 92”
Transport Width (with stabilizers up) 40” 42½” 42½” 42½”
Loading Height (bucket at 60° rotation) 62” 80” 89” 89”/104”
B Ground Clearance 10½” 10½” 10½” 10½”
C Transport Length 68” 80” 81” 81”
Transport Weight (base unit only - no bucket or mounts) 575 lbs. 765 lbs. 791 lbs. 980 lbs.
D Digging Depth (2 ft. flat bottom) 6’4” 7’8” 9’4” 9’4”/11’4”
E Overall Operating Height (fully raised) 92” 119” 135” 135”/152”
F Reach from Swing Post 100” 123” 141” 141”/164”
G Bucket Rotation 180° 180° 180° 180°
Swing Arc 180° 180° 180° 180°
Stabilizer Width (Spread) 74” 89” 89” 89”
Stabilizer Width (Transport) 40” 42½” 42½” 42½”
Operating Pressure 1800 psi 2250 psi 2250 psi 2250 psi
SAE* Dipper Boom Digging Force 1250 lbs. 2300 lbs. 3200 lbs. 3100/2200 lbs.
SAE* Bucket Digging Force 2600 lbs. 3800 lbs. 3925 lbs. 3925 lbs.
Boom Lift Capacity (end of dipper 3’ from ground) 385 lbs. 925 lbs. 750 lbs. 710/580 lbs.
Hydraulic Volume Requirements 5-7 gpm* 5-7 gpm* 5-7 gpm* 5-7 gpm*
Recommended Tractor HP 15-25 HP 22-45 HP 45-100 HP 45-100 HP
Recommended Skidsteer Requirements (SSQT) Mini Skidsteer 30-60 30-100 30-100
Main Boom Cylinder Diameter 2½” 3” 3” 3”
All Other Cylinder Diameters 2¼”, 2” (stabs, swing)
3” (dipper), 2½” 3” (dipper), 2½” 3” (dipper),
2½” (15/8 extend)
Bucket Sizes Available 9, 12, 15, 18 9, 12, 15, 18, 24 9, 12, 15, 18, 24 9, 12, 15, 18, 24
3 Point Hitch Cat I (PT300) Cat I (PT300)/Cat II (PT322) Cat I (PT300)/Cat II (PT322) Cat I (PT300)/Cat II (PT322)
*Equipment with higher GPM require Flow Divider Kit (#BFC501)
3 Point Hitch Mount
Buckets
Accessories
Hydraulic AccessoriesBackhoe Thumbs
Skidsteer Mount
Tieback Kit
SubFrame Kit
PTO Pump Kits
Skidsteers and Mini Skid Steers require a tieback kit with the quick attach to properly and safely disrtibute the stress produced by a backhoe attachment.For a list of available tieback kits visit www.embmfg.comIf your skidsteer is not on the list please talk to your dealer for options.
Part# Description
PT300 • Fits all models
PT322 • Fits GX700, GX720, GX900, GX920
Part# Description
BK2690 • 9” Bucket GX620• 3 teeth• Bucket Volume: 0.5115 cubic ft
BK2612 • 12” Bucket GX620• 3 teeth• Bucket Volume: 0.6934 cubic ft
BK2612 • 15” Bucket GX620• 4 teeth• Bucket Volume: 0.8749 cubic ft
BK2618 • 18” Bucket GX620• 4 teeth• Bucket Volume: 1.0567 cubic ft
BK2900 • 9” Bucket GX720, GX920, QC620• 3 teeth• Bucket Volume: 0.8416 cubic ft
BK2120 • 12” Bucket GX720, GX920, QC620• 3 teeth• Bucket Volume: 1.1694 cubic ft
BK2150 • 15” Bucket GX720, GX920, QC620• 4 teeth• Bucket Volume: 1.4806 cubic ft
BK2180 • 18” Bucket GX720, GX920, QC620• 4 teeth• Bucket Volume: 1.7912 cubic ft
BK2240 • 24” Bucket GX720, GX920, QC620• 5 teeth• Bucket Volume: 2.413 cubic ft
BK2240D • 24” Ditching Bucket GX720, GX920, QC620
• No teeth• Bucket Volume: 2.413 cubic ft
BK2360 • 36” Wide Bucket• Bucket Volume: 3.6195 cubic ft
BK690 • 9” Bucket GX500, GX600• 3 teeth
BK612 • 12” Bucket GX500, GX600• 3 teeth
BK615 • 15” Bucket GX500, GX600• 4 teeth
BK618 • 18” Bucket GX500, GX600• 4 teeth
BK900 • 9” Bucket GX700, GX900, QC600• 3 teeth
BK120 • 12” Bucket GX700, GX900, QC600• 3 teeth
BK150 • 15” Bucket GX700, GX900, QC600• 4 teeth
BK180 • 18” Bucket GX700, GX900, QC600• 4 teeth
BK240 • 24” Bucket GX700, GX900, QC600• 5 teeth
Part# Description
BT5230 • Clamp on mechanical thumb• GX700, GX900, QC600
BT5250 • Weld on mechanical thumb• Universal Fit
BT5260 • Clamp on mechanical thumb• BX22, BX23, BX24, BX25
BT5270 • Clamp on mechanical thumb• GX500
BT5280 • Clamp on mechanical thumb• GX620
BT5290 • Clamp on mechanical thumb• GX720/GX920
BT5300 • Hydraulic thumb kit• GX720/GX920
BT5310 • Clamp on mechanical thumb• GX620
BT5320 • Clamp on mechanical thumb• Kioti 2475/2485 backhoes
BT5330 • Clamp on mechanical thumb• GX920XT
Part# Description
AEKSD5 • Closed centre plug
BFC501 • Flow divider kit
Z51920 • Female flat faced coupler
• Fits most skidsteers
Z51919 • Male flat faced coupler• Fits most skidsteers
Part# Description
BT7220 • Quick change bucket adapter• GX720, GX920
BT7230 • Ripper Tooth• GX720, GX920
3085A300 • Rubber Street Pad• GX620
3085A350 • Rubber Street Pad• GX720, GX920
B13081 • Rubber Street Pad• GX700, GX900
AEKSD5 • Close centre plug
BFC501 • Flow divider kit• 7-30 gpm-Required when
mounting backhoe on skidsteer or tractors with 7 plus gpm
Z51920 • Female flat faced coupler
Z51919 • Male flat faced coupler
Part# Description
SQ400 • Quick attach mount• 35” wide• Includes flat faced couplers• requires tie back kit
SQ500 • Quick attach mount• 44” wide• Includes flat faced couplers• requires tie back kit
Part# Description
Part# Description
Part# Description
PT060 • PTO Hydraulic Pump Kit 7GPM• GX500
PT070 • PTO Hydraulic Pump Kit 7GPM• GX600, GX700, GX900
PT062 • PTO Hydraulic Pump Kit 7GPM• GX620
PT072 • PTO Hydraulic Pump Kit 7GPM• GX720, GX920
MA
NU
RE
SP
RE
AD
ER
S
78 Wallenstein 2014 Product Catalogue
COMPACT MANURE SPREADERS
MA
NU
RE
SP
RE
AD
ER
S
79Wallenstein 2014 Product Catalogue
A STABLEINVESTMENT.Wallenstein compact manure spreaders let you quickly take care of business so you can get back to the fun part of owning horses. Choose from various models to best fit your tractor and stable.
MX 80P
MX COMPACT MANURE SPREADER
MA
NU
RE
SP
RE
AD
ER
S
80 Wallenstein 2014 Product Catalogue
TURNING WASTE INTO A VALUABLE RESOURCE THAT IS EASY TO MANAGEBETTER CONTROL, BETTER RESULTS
LOAD AND GO
Healthy fields and pastures are the result of careful and proven practices that give your horses healthy grasses to eat season after season. Fertilization plays a critical part in maintaining strong plant roots promoting quick growth and durability against drought. The manure produced by horses and livestock is an excellent resource that gives nutrients back to the soil. With a little extra care and precision, using manure as fertilizer pays dividends to estate owners looking to turn seemingly waste into a cost effective pasture program, giving your horses and animals better grass for grazing or baling.
A fine spread speeds nutrients to the soil preventing dead spots while maintaining your pasture’s pristine appearance.
Wallenstein MX Spreaders are built ready. Easy operation means just load and go.
MX 80P
MA
NU
RE
SP
RE
AD
ER
S
81Wallenstein 2014 Product Catalogue
COMPACT ENOUGH FOR YOUR LARGE GARDEN
NUTRIENT ABSORPTION STRONG GROWTH
BOOST YOUR GARDEN’S YIELD
EASY TO MANAGE& COST EFFECTIVE
Manure is full of nutrients that help plants and grasses thrive when controlled properly. Nutrients are absorbed into the soil, reaching plant roots and boosting growth while strengthening the root system.
Using manure as fertilizer reduces your removal costs, including container bin rental and shipping. From stall to pasture, manure is part of an ongoing cycle of healthy growth.
• Accelerates pasture recovery, making it usable for grazing sooner.
• Maintains pasture appearance by blending in with the grass.
• Provides even coverage - no clumping, no missed spots.
• Dries faster, reducing odor.
INTEGRATION & GROWTH
A FINER SPREAD...
Turn piles of manure into a valuable resource for your garden. Increase the yields of your garden by enriching the soil. Returning nutrients to the soil after a growing season revitalizes the land and prepares it for another year.
A BEAUTIFULRESOURCE
MX COMPACT MANURE SPREADER
MA
NU
RE
SP
RE
AD
ER
S
82 Wallenstein 2014 Product Catalogue
GIVING YOU CONTROL FOR PRECISE HANDLING AND SPREADING
CHASSIS/FRAME• Frame mounted Beater supports
• Box and drive mounts
• Tongue load shared by frame
• Jack stand for level storage opt. MX 25 std. MX 50 & 80
• Reinforced Axle mounts
HEAVY DUTY BEARINGS
HEAVY DUTY, LONG-LASTING CONSTRUCTION
POWDER COATED PAINT
POLY FLOOR BOARDS
FINELY TUNED FOR FINE RESULTS
Heavy loads, rough terrain and towing forces are easily managed with the strength and support of the MX spreader’s frame. The trailer tongue, axle assembly and beaters rely on the rigidity of the frame which prevents the box from premature wearing and cracking.
Heavy duty bearings are standard for smooth operation and longer life reducing wear and tear.
Powder coated paint provides extra strength and durability against the highly corrosive nature of manure.
Tongue-and-groove poly floor boards will not rust or rot, and are easy to clean.
MADE TO LAST
BUILT FOR MATERIAL HANDLING
MA
NU
RE
SP
RE
AD
ER
S
83Wallenstein 2014 Product Catalogue
APRON CHAIN SPEED ADJUST
APRON CHAINTENSIONER
BEATER PADDLES
OPTIONALFINES PAN
OPTIONAL ENDGATE
Neutral, slow, medium or fast gives you the control to spread in a manner that suits your acreage.
MaximumCoverage
ApronSpeedShown with shields removed Neutral Slow Medium Fast
The apron chain tensioner keeps the required tension on the apron chain with this easily accessible adjustment, extending the system’s life cycle.
The right paddle design gives the MX Series spreaders the advantage for a finer spread, greatly reducing the delivery of large clumps with the dual ability to rip and shred evenly.
The optional fines pan is a great way to ensure larger chunks remain exposed to the beaters longer, breaking them into fine components.
The optional endgate is the ultimate way to control delivery. Close the endgate to eliminate spills during filling or on the way from stable to pasture. The endgate manually opens transforming the spreader to a fully functional utility holding trailer for all of your yard needs.
DESIGNED TO IMPROVE SPREADING
LET US MATCH YOUR TRACTOR
All models of the MX Compact Manure Spreader are available in your choice of color.
MANY COLORS AVAILABLE
*Colors may not be exactly as shown
MX COMPACT MANURE SPREADER
84 Wallenstein 2014 Product Catalogue
MAN
URE
SPRE
ADER
S
GROUND DRIVE MX Manure Spreaders offer simplicity and reliability for applications where a PTO doesn’t exist. Offering a full size range, MX ground drive units can be used with vehicles such as: ATV’s, UTV’s or even lawn tractors. Traction implement tires are standard on GROUND DRIVE units to ensure the torque is there for a fine, consistent spread.
MX 50G
FOR VEHICLES WITHOUT PTO CAPABILITIESHITCH & GO - GROUND DRIVE
• 50 Bushel Heaped Capacity (62 cu.ft.)• Ground Drive• 7.6 x 15/5 Tires/Bolts• 10 Paddles• 795 Lbs. Total Weight W/Tires • 50 Lbs. Tongue Weight • Box Dim. (LxWxH) 89” x 32” x 17”• Dim. (LxWxH) 156” x 57” x 35.5”
• 80 Bushel Heaped Capacity (100 cu.ft.)• Ground Drive• 7.6 x 15/5 Tires/Bolts• 10 Paddles• 920 Lbs. Total Weight W/Tires • 56 Lbs. Tongue Weight • Box Dim. (LxWxH) 102” x 38” x 20”• Dim. (LxWxH) 168” x 63” x 37”
• 25 Bushel Heaped Capacity (31 cu.ft.)• Ground Drive • 6 x 12/5 Tires/Bolts• 8 Paddles• 510 Lbs. Total Weight W/Tires • 34 Lbs. Tongue Weight • Box Dim. (LxWxH) 72” x 26” x 15”• Dim. (LxWxH) 117” x 48” x 29”
MX 80G
MX 50G
MX 25G
MA
NU
RE
SP
RE
AD
ER
S
85Wallenstein 2014 Product Catalogue
PTO DRIVE MX Manure Spreaders offer increased power and spreading consistency combined with ease of use. PTO DRIVE model’s harness the power of your tractor to deliver capacities of 50 and 80 bushels to your field. Connected by belt and pulley, the driveshaft and gear box deliver efficient power to the beaters.
MX 80P
FOR TRACTORS WITH PTO POWERPTO POWER & PERFORMANCE - PTO DRIVE
• 80 Bushel Heaped Capacity (100 cu.ft.)• PTO Drive• 7.6 x 15/5 Tires/Bolts• 10 Paddles• 920 Lbs. Total Weight W/Tires • 56 Lbs. Tongue Weight • Box Dim. (LxWxH) 102” x 38” x 20”• Dim. (LxWxH) 168” x 63” x 37”
• 50 Bushel Heaped Capacity (62 cu.ft.)• PTO Drive• 7.6 x 15/5 Tires/Bolts• 10 Paddles• 795 Lbs. Total Weight W/Tires • 50 Lbs. Tongue Weight • Box Dim. (LxWxH) 89” x 32” x 17”• Dim. (LxWxH) 156” x 57” x 35.5”
MX 80P
MX 50P
MX COMPACT MANURE SPREADER
MA
NU
RE
SP
RE
AD
ER
S
86 Wallenstein 2014 Product Catalogue
Options
Jack Stands
Fines Pans
End Gates
Colour Options
When ordering, please use 3 letter colour designation behind models
-BLU -GRN -ORA -RED -GRY
Part# Description
Z91513 • Flat bottom jack (MX25)• standard on other models
Part# Description
M7550 • MX25
M7590 • MX80G SN# A0596023 and up• MX80P SN# A0597011 and up
M7610 • MX50P (all serial numbers)• MX50G SN# B07920001 and up
Part# Description
M7570 • MX50P (all serial numbers)• MX50G SN# B07920001 and up
M7580 • MX80G SN# A0596023 and up• MX80P SN# A0597011 and up
GE
NE
RATO
R
87Wallenstein 2014 Product Catalogue
DK5000E
HUF12000E
WDC160
GENERATORS & WELDERS
GE
NE
RAT
OR
88 Wallenstein 2014 Product Catalogue
MODEL EC2500 EC3000SU EC5000 / EC5000GFI
ENGINE 160 CC / HONDA GC160 169 CC / SUBARU EX17 270 CC / HONDA GX270
MAXIMUM WATTS 2500 3000 5000
CONTINUOUS WATTS 2100 2500 4500
MAXIMUM AMPS (120V / 240V) 20.8 21.6 41.6 / 20.8
CONTINUOUS AMPS 17.5 19 37.5 / 18.8
FREQUENCY 60 HZ 60 HZ 60 HZ
VOLTAGE 120V 120V 120 / 240V
FUEL TANK CAPACITY 3.1 LITRES 3.6 LITRES 6 LITRES
RUN TIME (HOURS) HALF LOAD FULL LOAD
32.5
4 3
4 3
WEIGHT (LBS) 68 74 122
DIMENSIONS (INCHES) LENGTH WIDTH HEIGHT
22 16 16
22 16 16
25.5 20 21
OIL ALERT SYSTEM YES YES YES
OVERLOAD PROTECTION YES YES YES
ENGINE STARTING RECOIL RECOIL RECOIL
AUTO IDLE WITH IDLE DELAY N / A N / A N / A
HOUR METER N / A N / A N / A
• ECONOMY • ROLL CAGE FRAME • OIL ALERTTM (HONDA)• LOW OIL SENSOR (SUBARU)• RECEPTACLES• REAR MOUNTED
ELECTRICAL PANELWK210 & WK214
(OPTIONAL) Wheel Kits Fit All Models
WK210 - 10” Tires WK214 - 14” Tires
EC2500
EC5000
EC3000SU
EC SERIESEC SERIES GENERATORS
GE
NE
RATO
R
89Wallenstein 2014 Product Catalogue
MODEL EU5000 EU5000E EU6000 EU6000E EU7200E
ENGINE 270 CC / HONDA GX270
270 CC / HONDA GX270
389 CC / HONDA GX340
389 CC / HONDA GX340
389 CC / HONDA GX390
MAXIMUM WATTS 5000 5000 6000 6000 7200
CONTINUOUS WATTS 4500 4500 5000 5000 6500
MAXIMUM AMPS (120V / 240V) 41.6 / 20.8 41.6 / 20.8 55 / 27.5 55 / 27.5 60 / 30
CONTINUOUS AMPS 37.5 / 18.8 37.7 / 18.8 41.6 / 20.8 41.6 / 20.8 54.1 / 27.1
FREQUENCY 60 HZ 60 HZ 60 HZ 60 HZ 60 HZ
VOLTAGE 120 / 240V 120 / 240V 120 / 240V 120 / 240V 120 / 240V
FUEL TANK CAPACITY 21 LITRES 21 LITRES 21 LITRES 21 LITRES 21 LITRES
RUN TIME (HOURS) HALF LOAD FULL LOAD
12 7
12 7
12 7
12 7
11.5 6.5
WEIGHT (LBS) 159 163 186 189 208
DIMENSIONS (INCHES) LENGTH WIDTH HEIGHT
28 20 24
28 20 24
28 20 24
28 20 24
28 20 24
OIL ALERT SYSTEM YES YES YES YES YES
OVERLOAD PROTECTION YES YES YES YES YES
ENGINE STARTING RECOIL REC. / ELECTRIC RECOIL REC. / ELECTRIC REC. / ELECTRIC
AUTO IDLE WITH IDLE DELAY N/A N/A N/A N/A N/A
HOUR METER N/A N/A N/A N/A N/A
• ECONOMY • ROLL CAGE FRAME • OIL ALERTTM (HONDA)• LOW OIL SENSOR (SUBARU)• RECEPTACLES• REAR MOUNTED
ELECTRICAL PANEL
EU SERIES CONTROL PANEL AND ELECTRICAL OUTLETS
WK210 & WK214 (OPTIONAL)
Wheel Kits Fit All Models
WK210 - 10” Tires WK214 - 14” Tires
• OIL ALERTTM • FOUR 120V 20A TEE OUTLETS• ONE 120V TWIST LOCK (L305)• ONE 120 / 240V TWIST LOCK
(L14-30)• KEY SWITCH AND CHOKE IN
CONTROL PANEL ON ELECTRIC START MODELS
• ELECTRIC START MODELS ACCEPT STANDARD L & G BATTERIES
Battery not included.
EU6000 EU6000E
EU7200E
EU5000 EU5000E
EU SERIESEU SERIES GENERATORS
GE
NE
RAT
OR
90 Wallenstein 2014 Product Catalogue
MODEL GF5000A GF5000EA GF6000A GF6000EA GF7200EA
ENGINE 270 CC / HONDA GX270
270 CC / HONDA GX270
389 CC / HONDA GX340
389 CC / HONDA GX340
389 CC / HONDA GX390
MAXIMUM WATTS 5000 5000 6000 6000 7200
CONTINUOUS WATTS 4500 4500 5000 5000 6500
MAXIMUM AMPS (120V / 240V)
41.6 / 20.8 41.6 / 20.8 55 / 27.5 55 / 27.5 60 / 30
CONTINUOUS AMPS 37.5 / 18.8 37.7 / 18.8 41.6 / 20.8 41.6 / 20.8 54.1 / 27.1
FREQUENCY 60 HZ 60 HZ 60 HZ 60 HZ 60 HZ
VOLTAGE 120 / 240V 120 / 240V 120 / 240V 120 / 240V 120 / 240V
FUEL TANK CAPACITY 21 LITRES 21 LITRES 21 LITRES 21 LITRES 21 LITRES
RUN TIME (HOURS) HALF LOAD FULL LOAD
12 7
12 7
12 7
12 7
11.5 6.5
WEIGHT (LBS) 159 163 186 189 208
DIMENSIONS (INCHES) LENGTH WIDTH HEIGHT
28 20 24
28 20 24
28 20 24
28 20 24
28 20 24
OIL ALERT SYSTEM YES YES YES YES YES
OVERLOAD PROTECTION YES YES YES YES YES
ENGINE STARTING RECOIL REC. / ELECTRIC RECOIL REC. / ELECTRIC REC. / ELECTRIC
AUTO IDLE WITH IDLE DELAY YES YES YES YES YES
HOUR METER YES YES YES YES YES
GF SERIES CONTROL PANEL AND ELECTRICAL OUTLETS
• AUTO IDLE WITH VARIABLE TIME DELAY AND HOUR METER
• OIL ALERTTM • FOUR 120V GFI OUTLETS• ONE 120V TWIST LOCK (L305)• ONE 120 / 240V TWIST LOCK (L14-30)• KEY SWITCH AND CHOKE IN CONTROL
PANEL ON ELECTRIC START MODELS• ELECTRIC START MODELS ACCEPT
STANDARD L & G BATTERIES IN FRAME
RENTAL & CONSTRUCTION
WK210 & WK214
(OPTIONAL) Wheel Kits Fit
All Models WK210 - 10” Tires WK214 - 14” Tires
Battery not included.
GF5000A GF5000EA GF6000A GF6000EA GF7200EA
GF5000A GF6000A GF7200EA
GF SERIES
GF SERIES GENERATORS
GE
NE
RATO
R
91Wallenstein 2014 Product Catalogue
MODEL WDC160 WDC190E WDC190EA
ENGINE 389 CC / HONDA GX340 389 CC / HONDA GX390 389 CC / HONDA GX390
FUEL TANK CAPACITY 6.5 LITRES 6.8 LITRES 21 LITRES
RUN TIME HALF LOAD (HOURS) FULL LOAD (HOURS)
4 3
3.5 2.75
12 7
OIL ALERT SYSTEM YES YES YES
OVERLOAD PROTECTION YES YES YES
ENGINE STARTING RECOIL RECOIL / ELECTRIC RECOIL / ELECTRIC
AUTO IDLE WITH IDLE DELAY N/A N/A YES
HOUR METER N/A N/A YES
GFI RECEPTACLES YES YES YES
GENERATOR SPECIFICATIONS MAXIMUM WATTS
CONTINUOUS WATTS MAXIMUM AMPS (110V / 220 V)
CONTINUOUS AMPS FREQUENCY
VOLTAGE
3500 3000
30 / 15 25 / 12.5
60 HZ 110 / 220
3500 3000
30 / 15 25 / 12.5
60 HZ 110 / 220
3500 3000
30 / 15 25 / 12.5
60 HZ 110 / 220
WELDER SPECIFICATIONS MAXIMUM AMPS (DC)
DUTY CYCLE CABLE LENGTH
HELMET
160 50% 25 FT.
INCLUDED
190 50% 25 FT.
INCLUDED
190 50% 25 FT.
INCLUDED
WEIGHT 183 LBS 197 LBS 213 LBS
DIMENSIONS (INCHES) LENGTH WIDTH HEIGHT
28 20 21
28 20 21
28 20 28
• 50% DUTY CYCLE • WELDING HELMET INCLUDED• 25’ CABLES
WDC190EA PANEL
WDC160 WDC190EAWDC190E
WELDER GENERATORS
WELDER/GENERATORS
GE
NE
RAT
OR
92 Wallenstein 2014 Product Catalogue
MODEL HUF12000E HUF12000EA
ENGINE 688 CC / HONDA GX630 688 CC / HONDA GX630
MAXIMUM WATTS 12000 12000
CONTINUOUS WATTS 10000 10000
MAXIMUM AMPS (120V / 240V) 100 / 50 100 / 50
CONTINUOUS AMPS 84 / 42 84 / 42
FREQUENCY 60 HZ 60 HZ
VOLTAGE 120 / 240 120 / 240
FUEL TANK CAPACITY 40 LITRES 40 LITRES
RUN TIME (HOURS) HALF LOAD FULL LOAD
10 7
10 7
WEIGHT (LBS) 348 348
DIMENSIONS (INCHES) LENGTH WIDTH HEIGHT
32 22 29
32 22 29
OVERLOAD PROTECTION YES YES
ENGINE STARTING ELECTRIC ELECTRIC
AUTO IDLE WITH IDLE DELAY NO YES
HOUR METER YES YES
GFI RECEPTACLES NO YES
VOLTAGE METER YES YES
WK210 & WK214 (OPTIONAL)
Wheel Kits Fit All Models WK210 - 10” Tires WK214 - 14” Tires
• HONDA V-TWIN ENGINE• LIFTING HOOKS• ELECTRIC START
HUF12000E HUF12000EA
HUF SERIESHUF SERIES GENERATORS
GE
NE
RATO
R
93Wallenstein 2014 Product Catalogue
DK5000E DK7300E
ENGINE 349 CC KD350 KOHLER
416 CC OC95-E3 KUBOTA
MAXIMUM WATTS 5000 7300
CONTINUOUS WATTS 3750 6000
MAXIMUM AMPS (120v/240v) 41.6/20.8 60.8/30.4
CONTINUOUS AMPS 31.25/15.6 50/25
FREQUENCY 60Hz 60Hz
VOLTAGE 120 / 240 120 / 240
FUEL TANK CAPACITY 20 LITRES 20 LITRES
WEIGHT 205 LBS. 270 LBS.
DIMENSIONS: LENGTH 29.25” 31.5”
WIDTH 20.2” 21”
HEIGHT 23.75” 23.75”
ENGINE STARTING ELECTRIC / RECOIL ELECTRIC / RECOIL
OVERLOAD PROTECTION YES YES
RUN TIME: HALF LOAD 22 HOURS 16 HOURS
RUN TIME: FULL LOAD 14 HOURS 9 HOURS
• KUBOTA TIER 4 HEAVY DUTY ENGINE• KOHLER TIER 3 HEAVY DUTY ENGINE• FULL POWER FEATURE• POWER MONITOR• ELECTRIC AND RECOIL START• KEY SWITCH & WARNING LIGHTS• ONE L14-30 RECEPTACLE• ONE L5-30 RECEPTACLE• TWO GFCI 15-20R RECEPTACLES• LOW OIL SHUTDOWN (DK5000E)• LOW OIL ALERT (DK7300E)• LOW FUEL CONSUMPTION
Power Monitor Feature: Wallenstein Diesel Generators are designed to operate at moderate to high load. Operating at medium to no load will cause carbonizing and eventual engine failure. The Power Monitor feature will indicate under-load conditions, alerting the user to increase to optimum load requirements.
DK5000E DK7300E
DIESEL POWEREDDIESEL POWERED GENERATORS
GE
NE
RAT
OR
94 Wallenstein 2014 Product Catalogue
AVERAGE WATTAGE REQUIREMENT GUIDE
HOUSEHOLDAPPROX. STARTING WATTAGE
APPROX. RUNNING WATTAGE
Coffee Maker 600 600
Dish Washer 540 216
Table Saw (10 Inches) 4500 1800
Drill (3/8”, 4 amps) 600 440
Drill (1/2”, 5.4 amps) 900 600
Electric Frying Pan 1500 1500
Electric Range 8” Element 2100 2100
Microwave Oven (650 watts) 1000 1000
Refrigerator/Freezer (Energy Star) 1200 132-192
Automatic Washer 1200 1200
Clothes Dryer (Electric) 6750 5400
Furnace Fan (1/8 hp) 500 300
Furnace Fan (1/6 hp) 750 500
Furnace Fan (1/4 hp) 1000 600
Furnace Fan (1/3 hp) 1400 700
Furnace Fan (1/2 hp) 2350 875
Incandescent Lights On Bulb On Bulb
Radio 50-200 50-200
Sump Pump (1/3 hp) 1300 800
Sump Pump (1/2 hp) 2150 1050
Television (Colour) 300 300
Air Conditioner (10000 BTU) 2200 1500
INDUSTRIAL MOTORSAPPROX. STARTING WATTAGE
APPROX. RUNNING WATTAGE
Split Phase 1/4 hp 1700 400
Split Phase 1/2 hp 2600 600
Capacitor Start Induction Run 1/3 hp 975 450
Capacitor Start Induction Run 1 hp 2300 1000
Capacitor Start Capacitor Run 1-1/2 hp 4200 1600
Fan - 1/4 hp 1200 650
FARM EQUIPMENTAPPROX. STARTING WATTAGE
APPROX. RUNNING WATTAGE
Electric Fence (25 miles) 250 250
Milk Cooler 1800 1100
Milker (Vacuum Pump, 2hp) 2300 1000
Portable Heater (Kerosene/Diesel 50,000 BTU) 600 400
Portable Heater (Kerosene/Diesel 90,000 BTU) 725 500
Portable Heater (Kerosene/Diesel 150,000 BTU) 1000 625
Battery Charger (15 Amp) 380 380
Battery Charger (60 Amp w/ 250 Amp Boost) 1500/5750 1500/5750
Battery Charger (100 Amp w/ 300 Amp Boost) 2400/7800 2400/7800
Electric Welder (200 Amp AC) 9000 9000
CONTRACTORAPPROX. STARTING WATTAGE
APPROX. RUNNING WATTAGE
Air Compressor (1/2 hp) 1600 975
Air Compressor (1 hp) 4500 1600
Bench Grinder (8”) 2500 1400
Hand Drill (1/2”) 900 600
Pressure Washer (1hp) 3600 1200
Circular Saw (7-1/4”) 2300 1400
Electric Chain Saw (14”, 2 hp) 1100 1100
230 Amp AC (at 100 amp) 7800 7800 Terms: E & O E. Specifications subject to change without notice.
Amps X Volts = Wattage
Options
Part# Description
Z63417 • 125/250V• Universal Style 3 pole 4 wire• Configure for 14-30P or 14-50P• 4 Prong
Z63402 • 125/250V• 30A Twistlock• L14-30• 4 Prong
Z63411 • 125v• 30A Twistlock• L5-30• 3 Prong
Part# Description
G20211 • 10’ Power Cord• one male, one female• L14-30 30A Twistlock
G20212 • 20’ Power Cord• one male, one female• L14-30 30A Twistlock
G20213 • 25’ Power Cord• one male, one female• L14-30 30A Twistlock
Part# Description
Z93201 • EU & GF series (U1-250)• Size: LxWxH- 7.5`x5`x6`
Z93204 • 340 CCA• Size: LxWxH- 7 5/8x5 1/8x6 1/8
Part# Description
WK210 • 10” Tires
WK214 • 14” Tires
PlugPower Cord
Two Wheel Kit
Lawn and Garden Battery
To access Wallenstein’s 3-year product warranty, consumers must complete the online product registration within 30 days of purchase.
To register your new Wallenstein product, visit our website at www.embmfg.com/warranty.
Online Product Registration
CNC MACHININGPRECISION LASER CUTTINGPOWDER COATING
WALLENSTEIN PRODUCTS,
PARTS AND SERVICE
ARE SUPPORTED BY OUR
WORLD-WIDE AUTHORIZED
DEALER NETWORK .
www.embmfg.com
PRINTED JUNE 2014
Manufactured by EMB MFG Inc. 1-877-695-9283 Tel: (519) 699-9283 Fax: (519) 699-41464144 Boomer Line, St. Clements, ON N0B 2M0 Email: [email protected]
To contact your local Wallenstein Dealer visit www.embmfg.com PA
RT
# Z
9639
0 R
EV
2605
14E
EC
I143
33-S
01-0
1P
RIN
TE
D I
N C
AN
AD
A