2013_06-18-Auto-Detailing-Flyer

8
Omaha, NE 1-800-228-9666 Davenport, IA 1-800-553-6975 dultmeier.com 5/08/13 Call Us Toll-Free at 1-800-228-9666 Auto Detailing Products & Supplies! DAVENPORT, IOWA 601 W. 76th ST. 1-800-553-6975 OMAHA, NEBRASKA 13808 IND. ROAD 1-800-228-9666 RO Membrane Elements Part No. FilmTec Cross Ref Size-OD x Length *Flow Rate Net Ea. EP ETT08 TW30-2540 2-1/2" x 40" 850 GPD $ 169.00 EP ETT10 TW30-4021 4" x 21" 900 GPD 259.00 EP ETT11 TW30-4040 4" x 40" 2200 GPD 261.00 * Based on 77° F. inlet water at 225 psi. Flow rates will vary with water temperature. Thin-Film Composite Membranes for replacement in a wide variety of Reverse Osmosis Systems. FILMTEC ® Brand. These membranes are designed to be used with tap water. Typical salt rejection is 96% - 99%. Maximum operating temperature is 113° F. Chlorine pre-filters and water softeners should be used on water supply prior to entering these membranes. (TW Series are for TAP water. Other membranes are also available.) REVERSE OSMOSIS PRODUCTION SYSTEMS ONLY These are the systems that produce your spot-free water. Available from 600 to 8700 gallon per day production capacities. Features: Stainless Steel Frame Carbon chlorine filter with automatic backwash feature. Flow meters for concentrate and permeate levels. 10 micron prefilters. Liq- uid level control for RO water holding tank. Stainless Steel stands Automatic & manual backwash feature for added membrane life. Replaceable Thin-Film Composite membranes. Pre- plumbed, pre-wired and tested prior to shipment. Designed to deliver 180 psi to the membranes. Systems up through 800 gpd are 39" H x 15" W x 13" D. Systems rated from 2200 to 8700 gpd are 54" H x 28" W x 24" D. 11,000 GPD unit is stain- less wall mount frame. Chlorine Carbon Bottle with Auto Back Wash (L0005FL/L0006FL/L0007FL) UL Listed Electrical Panel *Gallons Part No. Per Day HP Volts Wt. Net Ea. DU RO250-3 800 1/4 110 55 lbs. $ 2685.00 DU RO250-4 900 1/4 110 60 lbs. 2783.00 DU RO250-5 2,200 1-1/2 110/230 100 lbs. 3394.00 DU RO250-6 4,400 1-1/2 110/230 125 lbs. 4445.00 Membrane Housings Replacement Housings for Membranes in RO Spot Free Rinse Systems. Available in PVC, Fiberglass or Stainless Steel construction. Standard sizes are for 2-1/2" or 4" diameter membranes. All housings come complete with end plugs and o-rings. PVC housings are rated to 200 PSI, fiberglass are rated to 300 PSI and stainless are rated to 300 PSI. STAINLESS FIBERGLASS For Membrane Part No. Material O.D. Length Net Ea. EP HE002 PVC 2-1/2" 21" $ 62.95 EP HE003 PVC 2-1/2" 40" 68.50 EP HEG02 Fiberglass 2-1/2” 21” 87.50 EP HEG03 Fiberglass 2-1/2” 40” 90.95 EP HEG05 Fiberglass 4” 21” 99.50 EP HEG06 Fiberglass 4” 40” 97.95 EP HES02 Stainless 2-1/2" 21" 65.75 EP HES03 Stainless 2-1/2" 40" 80.95 EP SS421 Stainless 4" 21" 71.95 EP SS440 Stainless 4" 40" 95.15 Stainless Steel MAT HOLDERS “CLOTHESPIN” STYLE Part No. Construction Net Ea. BC 40229S Clamp with Red Decal ...... $ 8.70 BC 40229S-BL Clamp with Blue Decal ..... 8.70 BC 40229S-GR Clamp with Green Decal... 8.70 BC 40229S-YL Clamp with Yellow Decal .. 8.70 ND MD5 Decal ONLY, Red .............. 1.45 ND MD5B Decal ONLY, Blue ............. 1.45 ND MD5G Decal ONLY, Green .......... 1.45 ND MD5Y Decal ONLY, Yellow ......... 1.45 NEW Decals ! Prices Subject to Change Without Notice

description

http://www.dultmeier.com/pdfs/2013_06-18-Auto-Detailing-Flyer.pdf

Transcript of 2013_06-18-Auto-Detailing-Flyer

Page 1: 2013_06-18-Auto-Detailing-Flyer

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com 5/08/13

Call Us Toll-Free at 1-800-228-9666

Auto Detailing Products & Supplies!DAVENPORT, IOWA

601 W. 76th ST. 1-800-553-6975

OMAHA, NEBRASKA13808 IND. ROAD 1-800-228-9666

RO Membrane Elements

Part No. FilmTec Cross Ref Size-OD x Length *Flow Rate Net Ea.EP ETT08 TW30-2540 2-1/2" x 40" 850 GPD $ 169.00 EP ETT10 TW30-4021 4" x 21" 900 GPD 259.00 EP ETT11 TW30-4040 4" x 40" 2200 GPD 261.00* Based on 77° F. inlet water at 225 psi. Flow rates will vary with water temperature.

Thin-Film Composite Membranes for replacement in a wide variety of Reverse Osmosis Systems. FILMTEC® Brand. These membranes are designed to be used with tap water. Typical salt rejection is 96% - 99%. Maximum operating temperature is 113° F. Chlorine pre-filters and water softeners should be used on water supply prior to entering these membranes. (TW Series are for TAP water. Other membranes are also available.)

REVERSE OSMOSIS PRODUCTION SYSTEMS ONLY

These are the systems that produce your spot-free water. Available from 600 to 8700 gallon per day production capacities.

Features: Stainless Steel Frame • Carbon chlorine filter with automatic backwash feature. • Flow meters for concentrate and permeate levels. • 10 micron prefilters. • Liq-uid level control for RO water holding tank. • Stainless Steel stands • Automatic & manual backwash feature for added membrane life. • Replaceable Thin-Film Composite membranes. • Pre-plumbed, pre-wired and tested prior to shipment. Designed to deliver 180 psi to the membranes. Systems up through 800 gpd are 39" H x 15" W x 13" D. Systems rated from 2200 to 8700 gpd are 54" H x 28" W x 24" D.11,000 GPD unit is stain-less wall mount frame.

Chlorine Carbon Bottle with Auto

Back Wash (L0005FL/L0006FL/L0007FL)

UL ListedElectrical Panel

*Gallons Part No. Per Day HP Volts Wt. Net Ea.DU RO250-3 800 1/4 110 55 lbs. $ 2685.00 DU RO250-4 900 1/4 110 60 lbs. 2783.00 DU RO250-5 2,200 1-1/2 110/230 100 lbs. 3394.00DU RO250-6 4,400 1-1/2 110/230 125 lbs. 4445.00

MembraneHousings

Replacement Housings for Membranes in RO Spot Free Rinse Systems. Available in PVC, Fiberglass or Stainless Steel construction. Standard sizes are for 2-1/2" or 4" diameter membranes. All housings come complete with end plugs and o-rings. PVC housings are rated to 200 PSI, fiberglass are rated to 300 PSI and stainless are rated to 300 PSI.

STAINLESS

FIBERGLASS

For MembranePart No. Material O.D. Length Net Ea.EP HE002 PVC 2-1/2" 21" $ 62.95 EP HE003 PVC 2-1/2" 40" 68.50 EP HEG02 Fiberglass 2-1/2” 21” 87.50 EP HEG03 Fiberglass 2-1/2” 40” 90.95 EP HEG05 Fiberglass 4” 21” 99.50 EP HEG06 Fiberglass 4” 40” 97.95 EP HES02 Stainless 2-1/2" 21" 65.75 EP HES03 Stainless 2-1/2" 40" 80.95 EP SS421 Stainless 4" 21" 71.95 EP SS440 Stainless 4" 40" 95.15

Stainless Steel

MAT HOLDERS“CLOTHESPIN” STYLE

Part No. Construction Net Ea.BC 40229S Clamp with Red Decal ...... $ 8.70 BC 40229S-BL Clamp with Blue Decal ..... 8.70 BC 40229S-GR Clamp with Green Decal... 8.70 BC 40229S-YL Clamp with Yellow Decal .. 8.70 ND MD5 Decal ONLY, Red .............. 1.45 ND MD5B Decal ONLY, Blue ............. 1.45 ND MD5G Decal ONLY, Green .......... 1.45 ND MD5Y Decal ONLY, Yellow ......... 1.45

NEW Decals !

Prices Subject to Change

Without Notice

Page 2: 2013_06-18-Auto-Detailing-Flyer

Auto Detailing Products & Supplies

Page 2

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

DU PM6000G Belt Drive (Aluminum Cart)

4 GPM @ 3500 PSI

50 ft. Hose

PRESSURE WASH UNIT

$ 1498.00

Electric Motor Driven Pressure Washers with Hand Carry, Wall Mount or Wheeled Cart options. High quality AR or General Plunger pumps (Cat Pumps are optional on many models).

Standard Features Include: Aircraft grade, tubular aluminum frames • Pressure unloader valve • Thermo sensor valve • Chemical injector • 50’ Hose • Spray wand with quick coupler nozzles • 1-1/2 HP through 3 HP models can ship via UPS with minor assembly required • 6 HP and larger units ship via truck • Wheeled cart models feature pneumatic tires and shock absorbing feet • 115 Volt models include 36’ GFCI power cords • 230 Volt models include 12’ power cord without plug. (Optional Motor Starters are available if needed).

A suffix at end of part number is AR Pump, G suffix is General Pump

ELECTRIC DRIVE PRESSURE WASHERS

Electric Hand Carry ModelsPart-No. GPM PSI Motor Wt. Net Ea.BI HC2015G 2.0 1500 2HP / 115V / 1PH 98 lbs. $ 842.00 BI HC3010G 3.0 1000 2HP / 115V / 1PH 98 lbs. 842.00 BI HC3015G 3.0 1500 3HP / 230V / 1PH 125 lbs. 977.00

Electric Wall Mount ModelsPart-No. GPM PSI Motor Wt. Net Ea.BI WM2015G 2.0 1500 2HP / 115V / 1PH 98 lbs. $ 887.00 BI WM3010G 3.0 1000 2HP / 115V / 1PH 98 lbs. 887.00 BI WM3015G 3.0 1500 3HP / 230V / 1PH 125 lbs. 1029.00 BI WM4020A 4.0 2000 6HP / 230V / 1PH 230 lbs. 1859.00

Electric Wheeled Cart ModelsPart-No. GPM PSI Motor Wt. Net Ea.BI EE2015G 2.0 1500 2HP / 115V / 1PH 105 lbs. $ 879.00 BI EE3010G 3.0 1000 2HP / 115V / 1PH 105 lbs. 879.00 BI EE3015G 3.0 1500 3HP / 230V / 1PH 130 lbs. 1140.00 BI EE4020G 4.0 2000 6HP / 230V / 1PH 235 lbs. 1979.00 BI EE3530A 3.5 3000 7.5HP / 230V / 1PH 250 lbs. 2098.00 BI EE4030A 4.0 3000 7.5HP / 230V / 1PH 250 lbs. 2255.00 BI EE4035A 4.0 3500 10HP / 230V / 1PH 265 lbs. 2469.00 BI EE3540A 3.5 4000 10HP / 230V / 1PH 265 lbs. 2498.00

Model EE2015GElectric Wheeled Cart

Model HC2015GElectric Hand Carry

Model WM2015GWall Mount

StorageTanks

TANK FEATURES• Maximum Temperature is 140° F.• Flat spots located on bottom sidewall

for additional fitting installation.• Two top-edge molded-in lugs for sure &

safe tie down on 150 Gallon & Larger.• Heavy-duty polyethylene with ultra-violet

inhibitors added for protection against sunlight.

• Built-In Gallonage indicator.• Standard color is yellow. White Also

Available.

Fitting Siphon Wt. Part No. Capacity Dia. Ht. Filwell Size Tube Lbs. Net Ea.RV 41347 65 Gallon 23" 42" 8" 1-1/4” No 18 $ 101.00 RV 47333 110 Gallon 29" 42" 10" 3/4" No 36 148.50 RV 41856 * 200 Gallon 30” 72” 8” 2” Yes 52 236.50 RV 47399 210 Gallon 32" 69" 10" - No 59 243.50 RV 47401 * 210 Gallon 32” 69” 16” 2” No 59 243.50RV 47484 * 300 Gallon 35" 80" 10" 2" Yes 80 299.50* White Tank.

65 to 2,700 Gallons

Warm Air DryerB3-CD Blaster is a small hand carry dryer for portability. Single

motor develops 130 CFM with 2 stage dual fan. Rated to

10 amps. Includes 12’ power cord, 10’ blower

hose, blower nozzle and (5) different nozzle

attachments.GS B3-CD

Blaster$ 180.00

Pressure Washer Hose Assemblies

Hoses are fitted 3/8" MPT solid on both ends and have a hose saver sleeve on one end.

“Smooth” Cover 1 & 2 Wire • 3000 or 5800 PSI

Rated to 250°F.

Smooth Cover Pressure Washer Hoses rated to 3000 or 5800 PSI and 250° F. Available in Blue, Black or Yellow “smooth” rubber construction. All assemblies are standard 3/8” I.D. with 3/8” MPT solid ends. One hose bend restrictor is also standard.

BLACK HOSE ASSEMBLIES - SMOOTH COVERPart No. Length Max. PSI Wt. Net Ea.GA 6HR25 3/8" x 25', 1-Wire 3000 7 lbs. $ 27.60 GA 6HR50 3/8” x 50’, 1-Wire 3000 12 lbs. 50.60 GA 6HR75 3/8” x 75’, 1-Wire 3000 18 lbs. 72.95 GA 6HR100 3/8” x 100’, 1-Wire 3000 22 lbs. 95.70

BLUE HOSE ASSEMBLIES - SMOOTH, NON-MARKINGPart No. Length Max. PSI Wt. Net Ea.DU 6BL25 3/8" x 25', 1-Wire 3000 7 lbs. $ 29.95 DU 6BL50 3/8” x 50’, 1-Wire 3000 12 lbs. 53.95 DU 6BL75 3/8” x 75’, 1-Wire 3000 18 lbs. 77.95 DU 6BL100 3/8” x 100’, 1-Wire 3000 22 lbs. 102.50 DU 6BL25-2 3/8” x 25’, 2-Wire 5800 10 lbs. 40.60 DU 6BL50-2 3/8” x 50’, 2-Wire 5800 19 lbs. 75.95 DU 6BL75-2 3/8” x 75’, 2-Wire 5800 29 lbs. 111.50 DU 6BL100-2 3/8” x 100’, 2-Wire 5800 35 lbs. 147.00

Page 3: 2013_06-18-Auto-Detailing-Flyer

Page 3

Auto Detailing Products & Supplies

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

Buffer / Polisher Dual Head

Orbital Polishers from Cyclo Toolmakers, Inc. Guaranteed not to mar, burn or leave swirl marks. The exclusive feature of this polisher is the 4" dual action, orbital heads. Overlapping motion simulates gentle hand-rubbed quality. Deoxidizes, polishes and buffs paint to a mirror finish. Lightweight and balanced design enables the operator to work around complex curves, large areas and lower contours without excessive tiring.

Part No. Net Ea.CY 80-010 $ 305.50

Model 80-010

Features: 115 Volt, 60 Cycle, 1/3 HP, 3 Amp Motor • Speed is 2800-3200 RPM • Cord is 6’ Long, Non-Marking, 18/3 SJT, 3-Prong • Heavy Duty Cast Aluminum Housing • Certified Underwriter’s Laboratories Listed • Weight is 6-1/2 lbs.

Foam Bonnet PadsWhite Finishing Pads

Part No. Net Ea.CY 85-030 $ 5.91 CY 85-085 3.24

This superfine pad is used in final buffing, after polish-ing with other pads. Excellent for applying sealants and buffing out wax. No. 85-030 Foam Bonnet. No. 85-085 Bonnet with Velcro pad.

Recommended Applications:

• Extreme Shine • Final Wax Buff • Wax Applications • Sealant • Metal Sealant

Blue Finishing Pad

Part No. Net Ea.CY 72-115 $ No Match!

The perfect pad for light polishing on any surface. Use with wax and polish for a fine gloss finish or to remove swirl marks. No. 72-115 Bonnet comes with Velcro Pad.

Recommended Applications:

• Metal/Paint Sealant • Paint Polish • Paint Cleaner • Final Wax Buff • Wax Application

Green Finishing Pads

A more aggressive pad than the White Finishing Pad. The pore density makes it perfect for polishing and for removing light oxidation. Leaves a stunning shine. No. 85-035 Foam Bonnet. No. 85-095 Bonnet with Velcro pad.

Recommended Applications:

• Sealant • Paint Polish • Paint Cleaner • Metal Sealant

Part No. Net Ea.CY 85-035 $ 5.91 CY 85-095 3.21

Yellow Cutting Pads

A firm, versatile pad that can be used on everything from compounding and scratch removal to applying paint cleaners and polishes. No. 85-040 Foam Bonnet. No. 85-065 Bonnet with Velcro pad.

Recommended Applications:

• Paint Polish • Paint Cleaner • Paint Deox • Paint Compound • Paint Scratch Removal

Part No. Net Ea.CY 71-135X2 $ 16.20 CY 85-065 3.71

Genuine ChamoisAll natural, 100% Sheepskin Chamois Towels. Superior tanning for extra absorbency. Quickly removes water and dries any surface.

Part No. Size Pack Net Ea.GQ 40200 2 Square Ft. 1 $ 7.92 GQ 40202 3 Square Ft. 1 11.95 GQ 40204 4 Square Ft. 1 15.30

Detail Sprayers30SP & 50SP

3 Gallon Sprayer(includes 10' Hose)

All sprayers are high quality, reconditioned, stainless tanks that are double pressure tested prior to shipping.

Part No. Tank Size Wt. Net Ea.PS 30SP 3 Gallon Sprayer 9 lbs. $ 231.00 PS 50SP 5 Gallon Sprayer 12 lbs. 261.00 PS 3DP2 3 Gallon Dress Pro 11 lbs. 287.00PS DP02 Replacement Brush, 3DP2 ........ 23.95

3DP23 Gallon

"Dress Pro"(includes

10' hose & brush)

DP02 Brush Only

2 Gallon

Stainless Sprayer

FEATURES• Large “T” Style Pumping Handle• Adjustable Brass Nozzle• 48” Nylon-Reinforced Hose• 28” Brass Wand• Viton® Seals

Great Choice for harsh chemicals where stainless is required. Also a good choice for pesticides and herbicides.

Part No. Wt. Net Ea.SL 465 S.S. Hand Sprayer - 2 Gallon 7 lbs. $ 66.10

Acid SprayersThe first industrial sprayers expressly designed for acids. Pump type compression sprayer. Recommended working pressure is 40 PSI.

Part No. Net Ea.SX 20A 2-Gallon Acid Sprayer $ 89.95

20A

Trigger SprayerUnique design allows this sprayer to work with a bottle held at any angle, even upside down. Leak-proof design also means no spills or mess. Plastic construction can be used with a wide variety of cleaning chemicals.

Spray bottles are high density polyethylene, 32 oz. capacity and feature oz/ml scale. Std. Part No. Pkg. Net Ea.TO 300 Trigger Sprayer ........... 100 $ 1.09 TO 120125 32 Oz. Spray Bottle ..... 32 .72

No. 300TriggerSprayer

No. 120125Spray Bottle

Page 4: 2013_06-18-Auto-Detailing-Flyer

Page 4

Auto Detailing Products & Supplies

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

Part No. Material & Length Net Ea.FB 23540 10” Green Nylon... $ 12.50 FB 1209 10” Yellow Styrene 9.95 FB 23595 10” Hogs Hair ....... 44.05 SF 0408 8” Stiff Bristle ........ 7.97 FB 22320 14” Green Nylex ... 15.30

1209 Acid Resistant Brush

23595 Hogs Hair Brush

22320 Extra Wide Brush

10”

10” 10-1/2”

14”8”

23540 Extra Soft Brush

0408 Stiff Brush

Standard Dip Brushes

9002B

Part No. Material & Length Net Ea.SF 9002B 10” Black / White Styrene $ 13.75 FB 22530 10” Green Nylex .......... 17.55 FB 22540 11” Hogs Hair ............... 50.95

22530

22540

10-1/2”

11-1/2”

10”

Model 22530 features a bi-level block with green, nylex bristles. Size is 10” x 6-1/2”. Bristles are 2-1/2” long.

Wide Bi-Level Dip Brushes

Wheel & Tire Brushes

No. 475300

Wheel and Tire Brushes are compact brushes for use on wheels and tires. Plastic, square, flow-through block is 2-3/4" wide x 4-3/4" long. Designed to be used with coarse thread handles or poles. Square block nylon bristles are 2-3/4" long and comes in red. Hogs hair bristles are 3-3/4" long. Round block nylon bristles are 3-1/4” long and come in blue.

Part No. Trim Net Ea.FB 475300 Red Nylon, Square Block $ 13.55 FB 477108 Hogs Hair, Square Block 26.90 FB 315LT Blue Nylon, Round Block 7.60 SF 6070 5' Fiberglass Pole .......... 12.95 SB 10251 5' Wood Pole .................. 4.29 No. 315LT

D

WHEEL & SPOKE BRUSHESWheel Brushes. Long handle brushes for wheels and grills. 20” Overall length.

509L features natural, tampico bristles and 5” wide head.

94039 features super soft plastic bristles and molded handle with 4” wide head.

Part No. Type Bristles Length Net Ea.FB 509L Wheel Brush Tampico 20” $ 6.45 GQ 93039 Wheel Brush Nylon 20” 6.10

Spoke Brushes. Designed so that all sides of the brush has cleaning action.

94037 features comfortable molded plastic handle. Cleaning length is 7”, overall length is 12”.

27450 features wood handle with 11” cleaning length and 16” overall length.

Part No. Type Bristles Length Net Ea.GQ 94037 Spoke Brush Nylon 12” $ 2.45 FB 27450 Spoke Brush Tampico 16” 5.61

94037

27450

509L93039

Tire Dressing ApplicatorContour Tire Wipe keeps chemicals away from hands. Foam contours to the tire for full coverage. Applies dressings easily and smoothly. Size is 6-1/2” x 2-3/4”.

Part No. Type Net Ea.GQ 92043 Tire Wipe Sponge ........ $ 1.95 92043

WIPER COVER BAGS

Part No. Net Ea.DU WWB50 Wiper Bags, 3” Wide, Roll of 500 $ 19.75 DU WWB75 Wiper Bags, 5” Wide, Roll of 500 24.95

• WWB50 Bags are 3” Wide x 27” Long, 1.5 Mil

• WWB75 Bags are 5” Wide x 27” Long, 1.5 Mil

• Sold in Rolls of 500 Bags

Great for Protecting Rear Wiper Blades During the Wash Process!

Shown on Vehicle

Page 5: 2013_06-18-Auto-Detailing-Flyer

Page 5

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

Auto Detailing Products & SuppliesMicro-Fiber Detailer Towels

HT30 Large Detailer Towel. 16" x 24" Microfiber towel is ideal for use as a vehicle body towel. Sold Individually. Color is green or blue.

Micro-Fiber Cloth Towels are the hot-test new drying/polishing towels on the market! Three products in one. 1) Use for washing and drying. 2) Cleans windows streak-free without chemicals. 3) Use for polishing and wax removal. Safe for auto bodies, windows and interiors.

Part No. Description Net Ea.WT HT30 Large Micro-Fiber Towel, 24”x16”, Green .................... $ 1.69 WT HT30B Large Micro-Fiber Towel, 24"x16", Blue ...................... 1.69

These towels can be used wet or dry for chemical-free cleaning and polishing. 80-20 blend. Size is 16” x 16”. Three color options as noted. Quantity discounts available.

Professional Blend Microfiber Towels

Part No. Size Color Net Ea.GQ 45504 16” x 16” Gray $ 1.39 GQ 45505 16” x 16” Blue 1.39 GQ 45506 16” x 16” Yellow 1.39

80/20 Microfiber Blend Standard microfiber uses 20% polyamide for superior water and dust absorption.

Wash Mitts

40304

Chenille Wash Mitts are made of deep pile chenille that is perfect for any surface. Available with or without scrub netting on one side. Size is 10” long x 7” wide.

45512

Part No. Net Ea.GQ 45512 Chenille ........................... $ 2.86 GQ 40304 Chenille with scrub .......... 2.85

Protects & Beautifies Vinyl, Rubber,

Plastic & Leather

ARMORALL protectant in bulk containers. Guards against ozone, oxygen and ultraviolet rays which can crack, dull, harden and fade materials like rubber, vinyl, plastic, finished leather and sealed wood.

Can be used on interiors and exteriors of cars, boats, farm machinery, etc. Ideal for use as an extra service for tunnel and rollover car washes. Avail-able in 1 gallon, 20 gallon and 55 gallon containers. Also available in handy sponge packs (see our vending products section).

Part No. Container Wt. Net Ea.IM 90050 1-Gallon 9 lbs. $ 26.95 IM 90122 20-Gallon 170 lbs. 359.00 IM 90155 55-Gallon 480 lbs. 819.00

1 Gallon Protectant55 & 20

Gallon Drum

Bulk Protectant

Blue Shop Towels— HEAVY DUTY WIPERS —

Blue Wiper Towels. Ideal for heavy-duty and messy fluids applications. Low lint wiper. Made with 25% recycled cellulose fibers. Great for grease and grime cleanup. Pop up box contains 100 towels. 9-1/2” x 16-1/2”.

Per Box Part No. Box Qty. Wt. Net Ea.SL 7025701 Blue Wiping Towels 100 2.4 lbs. $ 6.50

Bollard Pole SleevesPolyethylene Pole Sleeves for maintenance-free Bollard protection. Installs easily, slips over existing posts. No more scraping and painting on your old poles, sleeves will make them look like new. Fade-resistant, design for all weather conditions. Recessed reflective top stripes increase visibility and safety. Wide selection of color options are available. Adhesive foam strips come with each pole for a snug, secure fit. Wide selection of color combinations.

Part No. Size Net Ea.DB 4552 * 4.5” Diameter x 52” Tall ............. $ 27.00DB 7060 * 7” Diameter x 60” Tall ................ 35.00Note: On 10 or more one order, take additional 5% discount

Page 6: 2013_06-18-Auto-Detailing-Flyer

Page 6

Auto Detailing Products & Supplies

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

Claw Style Vacuum Nozzles Heavy-Duty Polyethylene

Construction - 12" & 23" Lengths

NEW

COLORS!

Black Blue Grey Orange Red Yellow

Discount On 25+ Part No. Size Material Color Length Assorted Net Ea.AA 112P 1-1/2" Poly Black 12" 10% $ 2.19 AA 112P-B 1-1/2" Poly Blue 12" 10% 2.19 AA 112P-G 1-1/2" Poly Grey 12" 10% 2.19 AA 112P-O 1-1/2" Poly Orange 12" 10% 2.19 AA 112P-R 1-1/2" Poly Red 12" 10% 2.19 AA 112P-Y 1-1/2" Poly Yellow 12" 10% 2.19 AA 400P 1-1/2" Poly Black 23" 10% 4.40 AA 200P 2" Poly Black 12" 10% 2.19 AA 200P-B 2" Poly Blue 12" 10% 2.19 AA 200P-G 2" Poly Grey 12" 10% 2.19 AA 200P-O 2" Poly Orange 12" 10% 2.19 AA 200P-R 2" Poly Red 12" 10% 2.19 AA 200P-Y 2" Poly Yellow 12" 10% 2.19

Crevice Claw NozzlesLatest design in vacuum tools combines the functions of a crevice tool and a claw nozzle. Allows customers or employees to use one tool for both functions. Wide opening for strong suction and narrow shape for hard-to-reach areas. Plastic construction is 16-1/2” long. Available in 1-1/2” or 2” hose size. Color is black.

Part-No. Hose Size Length Net Ea. HC CCN15 1-1/2” 16-1/2” $ 4.96 HC CCN20 2” 16-1/2” 4.95

Inlet Valves & Hose Adapters

Part-No. Net Ea.HC 1V180 Inlet Valve 2" MPT x 1-1/2" Hose .............. $ 29.50 HC HA180 Hose Adapter for 1-1/2" Hose .................... 13.80

For Central Vacuum Systems

HA180Hose Adapter

1V180Inlet Valve

Hose Cuffs & Connectors– Standard Thread –

Regular vacuum cuffs and connectors. Straight Cuffs, Enlarger Cuffs and Reducer Cuffs in non-swivel styles. Color is gray.

A3161A3211 A3110 A4500

A32141

A3157AA3207A

Part No. Style Hose End Size Net Ea.DC A3110 Straight Hose Cuff 1-1/4” 1-1/4” slip $ 1.65 DC A3161 Straight Hose Cuff 1-1/2" 1-1/2" slip 1.90 DC A3211 Straight Hose Cuff 2" 2" slip 1.98 DC A4500 Straight Hose Cuff 2-1/2” 2-1/2” slip 5.26 DC A3161200 Enlarger Hose Cuff 1-1/2" 2" slip 2.15 DC A32141 Reducer Hose Cuff 2" 1-1/2" slip 2.30 DC A3157A Hose connector 1-1/2" 1-1/2" hose 1.79 DC A3207A Hose connector 2" 2" hose 3.56

10% Quanitity Discount on 25 or more Assorted.

A3161200

CreviceTools

Avai lable in e i ther 1-1/2" or 2” sizes Poly-ethylene, Stainless or Chrome construction. Overall lengths vary as shown.

Part No. Contruction Hose Size Length Net Ea.TE CV15B Stainless 1-1/2" 18" $ 25.80 HC CR112 Polyethylene 1-1/2" 11" 3.11 HC CR116 Polyethylene 1-1/2" 16" 3.56 HC CR225 *Polyethylene 2” 16” 3.66 HC CTC15 Chrome Plate 1-1/2" 15" 15.25* Standard with swivel cuff - 2” Only

CTC15

CR112 / CR116 / CR225

CV15B

Crush-Proof Vacuum Hose

Available in 1-1/4”, 1-1/2” and 2” sizes in a variety of colors. All hoses are sold in 15’ or 50’ bulk lengths without fittings. (See adjacent pages for cuffs and fittings). Note: Quantity Discounts Available - Call for Details. Other colors available on special order.

D

Part No. I.D. Length Color Net Ea.FX CP-1-1/4x15 1-1/4" 15' Grey/Black $ 11.95 FX CP-1-1/2x15 1-1/2" 15' Grey/Black 12.95FX CP-1-1/2x15B 1-1/2" 15' Black/Black 12.95 FX CP-1-1/2x15BL 1-1/2" 15' Blue/Black 12.95 FX CP-1-1/2x15O 1-1/2" 15' Orange/Black 12.95 FX CP-1-1/2x15R 1-1/2” 15’ Red/Black 12.95 FX CP-1-1/2x15Y 1-1/2" 15' Yellow/Black 12.95 FX CP-2x15 2" 15' Grey/Black 18.95 FX CP-2x15B 2" 15' Black/Black 18.95 FX CP-2x15BL 2" 15' Blue/Black 18.95 FX CP-2x15O 2" 15' Orange/Black 18.95 FX CP-2x15R 2” 15’ Red/Black 18.95 FX CP-2x15Y 2" 15' Yellow/Black 18.95 FX CP-1-1/4x50 1-1/4” 50' Grey/Black 37.95FX CP-1-1/2x50 1-1/2" 50' Grey/Black 40.95 FX CP-1-1/2x50BL 1-1/2" 50' Blue/Black 40.95 FX CP-1-1/2x50R 1-1/2” 50’ Red/Black 40.95 FX CP-1-1/2x50Y 1-1/2” 50’ Yellow/Black 40.95 FX CP-2x50 2” 50’ Grey/Black 62.95 FX CP-2x50BL 2” 50’ Blue/Black 62.95 FX CP-2x50R 2” 50’ Red/Black 62.95 FX CP-2x50Y 2” 50’ Yellow/Black 62.95

Our Most Popular Car Wash and Detail Hose! Crush-proof and super flexible. Abrasion-resistant, rounded outer shell for longer life. Superior kink-resistant design for ease of use. Ultra-violet resistant base for outdoor conditions. Ideal for use with Coin-Op and commercial vacuum systems. Rated from -40° to +140° F.

Page 7: 2013_06-18-Auto-Detailing-Flyer

Page 7

Auto Detailing Products & Supplies

Omaha, NE 1-800-228-9666 • Davenport, IA 1-800-553-6975 • dultmeier.com

OlympusCarpet Extractors

High quality carpet extractors are an ideal choice for car wash, detailer and auto dealers, A great way to clean carpets and upholstery in cars and trucks. Portable design for easy maneuvering. Large capacity tanks for continuous use.

Standard Features Include: • 1500 Watt, In-Line heater that delivers up to 165° F. water. • Compact design: 19" wide x 38" high x 27" deep. • 12 gallon solution tank, 12 gallon recovery tank with automatic shutoff • Molded Polyethylene Housing for added corrosion resistance • Pump output options from 100 to 500 PSI.• Dual, (2) stage vacuum motors on M100, M200, M500 & develops 130” lift

& 97 cfm. (3 Stage on Model M3-200HL & develops 192” lift & 100 cfm) • Pumps rated from 100 - 500 PSI.• 25’ Dual power cords.• Outlet barb for 1-1/2” vacuum hose. • 1/4” Quick coupler for solution hose hookup.• Built-in high heat safety limit.• No drip motor cavity - spills on the outside can’t get inside.• Motor cavity cooling system.

Compact Design

& Molded Polyethylene

Body for Corrosion

Resistance

Part No. Wt. Net Ea.TE M100HL Extractor Unit with 100 psi pump 92 lbs. $ 1397.00 TE M200HL Extractor Unit with 200 psi pump 98 lbs. 1698.00 TE M3-200HL †Extractor Unit with 200 psi pump 101 lbs. 1879.00 TE M500HL Extractor Unit with 500 psi pump 117 lbs. 2229.00 † Standard with dual 3-stage vacuum motors for added suction and lift.

Extractor AccessoriesTE 506 1-1/2” Stainless Hand Upholstery Tool * ...... $ 49.50 TE CV20 1-1/2” Stainless Crevice Tool * ..................... 52.90 TE 2115201 1-1/2"x15' Vacuum/Solution Hose Combo * . 106.50 TE 2115200 1-1/2" x 25' Vacuum/Solution Hose Combo . 143.00

Shown with Optional Hoses & Tool

Trigger Hand Operated Spray Guns

Part No. Description Net Ea.SS 22650-1/4PP Spray Gun Only, 1/4” FPT ....................... $ 13.95SS 22650PP Spray Gun Only, 3/8” HB ........................ 13.95SS 22670PP1/4-15 15” Spray Gun, 1/4” FPT & #8 Nozzle † . 22.35SS 22670PP 15” Spray Gun, 3/8” HB & #8 Nozzle † ... 22.10SS 22670PP-24406 24” Spray Gun, 3/8” HB & #8 Nozzle † ... 25.80 † Extensions Included on these models.

22650PP

22670PP-1/4-15

SHURfloDIAPHRAGM PUMPS

12-VOLT/115-VOLT/24 VOLTCapacities to 7.0 GPM • Pressures to 100 PSI

Many Other Models Available !

#4211-035

#8000-543-236#8000-543-250

SLV10 Series

Model G5700 Single & G257 Dual Diaphragm Air Driven Transfer Pumps. A compact pump with high flow and pressure capabilities. Applications include Chemical Transfer and Automotive Cleaning. Bag-in-the-Box Chemicals, Parts Washers. Capable of passing up to 1/8" solids.

FLOJET Air Pumps

Flow rates to 10 GPM and pressures to 100 PSI. • Temperatures to 120° F. • Self-priming to 15' • Patented shuttle valve eliminates stalling • Constructed of corrosion resistant materials to handle a wide variety of chemicals.

G5700

Part No. Diaphragm Max Flow Max PSI Net Ea.FJ G5700 Santoprene 7 GPM 100 $ 88.75 FJ G5700V Viton® 7 GPM 100 127.50 FJ G5700C Kalrez 7 GPM 100 143.50 FJ G257501A Santoprene 10 GPM 100 213.50 FJ G257301A Viton® 10 GPM 100 258.00

Self-Storing Coil HosesIdeal for use as air hoses. Polyurethane construction is highly kink and abrasion resistant with strength and flexibility. Superior oil resistance.

Each assembly comes standard with one swivel end and one solid end protected by bend restrictors. All hoses feature a 4" pigtail on one end and a 20" on the other. Rated to 140 psi. 1/4" hoses feature 1/4" MPT fittings. 3/8" ID hoses feature 3/8" MPT fittings. Replacement fittings are also available. Temperature Range is -68° F. to 140° F.

Working Overall Part No. Color I.D. Length Length Net Ea. TF A1001B Blue 1/4" 15' 18' $ 15.00 TF A1001BK Black 1/4" 15' 18' 15.00 TF A1001C Clear 1/4" 15' 18' 15.00 TF A1001R Red 1/4" 15' 18' 15.00 TF A1001Y Yellow 1/4" 15' 18' 15.00TF A1002B Blue 1/4" 25' 31' 19.90 TF A1002BK Black 1/4" 25' 31' 19.90 TF A1002C Clear 1/4" 25' 31' 19.90 TF A1002R Red 1/4" 25' 31' 19.90 TF A1002Y Yellow 1/4" 25' 31' 19.90 TF A1012C Clear 1/4" 35' 40' 25.95TF A1007B Blue 3/8" 15' 18' 29.40 TF A1007BK Black 3/8" 15' 18' 29.40 TF A1007C Clear 3/8" 15' 18' 29.40 TF A1007R Red 3/8" 15' 18' 29.40 TF A1007Y Yellow 3/8" 15' 18' 29.40TF A1008B Blue 3/8" 25' 31' 41.40 TF A1008BK Black 3/8" 25' 31' 41.40 TF A1008C Clear 3/8" 25' 31' 41.40 TF A1008R Red 3/8" 25' 31' 41.40 TF A1008Y Yellow 3/8" 25' 31' 41.40 TF A1011C Clear 3/8" 35' - 56.75

D

Page 8: 2013_06-18-Auto-Detailing-Flyer

Dultmeier SalesOr Current Resident

Box 45565Omaha, Nebraska 68145-0565

Auto Detailing

Products Inside !

PRSRT STDU.S. POSTAGE

PAIDOMAHA, NE

PERMIT NO. 314

Winter 2008 Car Wash Items & Specials!

Call Us Toll-Free at 1-800-228-9666

DAVENPORT, IOWA 52806601 West 76th Street

OMAHA, NEBRASKA 6813713808 Industrial Road 68137

TOLL-FREE 1-800-228-9666LOCAL 1-402-333-1444Fax No. 1-402-333-5546E-MAIL [email protected]

TOLL-FREE 1-800-553-6975LOCAL 1-563-386-0930Fax No. 1-563-386-5448

Auto Detailing Products & Supplies!

© Dultmeier Sales 2013

Low Profile Detailer WandsHigh Quality, Stainless Steel Hand Wands from Westpak. These wands are ideal for auto detailing as well as carpet and upholstery cleaning. Designed for 1-1/2” vacuum hoses and a wide variety of carpet extractors.

Part No. Width Size Guard Net Ea.TE 506 4" 1-1/2" No $ 49.50 TE 521 4" 1-1/2" Yes 51.35TE 2001 Brass Replacement Valve .. 13.40 TE 10-1371 Whip Hose as Replacement ... 9.97

Model 521

Model 506

Vacuum and solution hoses in one unique assembly. This design eliminates the need to tape or tie together your hoses. You also have the ease of rolling out one hose at the job. Since solution hose is in the vacuum hose, solution temperature is better maintained. Available in 1-1/2" or 2" sizes and in variable lengths. Solution hoses are rated to 2750 psi @ 212˚ F. Fittings are 1/4" MPT both ends. Replacement cuffs also available.

Vacuum/Solution “Combo-Hoses”

Part No. Vac Hose Size Length Net Ea.TE 2115205 1-1/2" 5' $ 69.75 TE 2115201 1-1/2” 15’ 106.50 TE 2115200 1-1/2" 25' 143.00 TE 2115250 1-1/2" 50' 209.00DC CU1 1-1/2" Combo-Hose Cuff, Solid . 3.98 DC CU4 1-1/2" Combo-Hose Cuff, Swivel . 5.46 DC CU2 2" Combo-Hose Cuff, Swivel ..... 12.25Other lengths available, prices on request.

Standard with Whip

Hose Adapter

Cuff

Prices Subject to Change Without Notice