1. 10BOP and 13BOP Order Picker

2. BOP Specifications Specification Unit HYUNDAI Hyundai10BOP-7 13BOP-7 Identification Capacity lbs 2,2003,000 Load Center in 2424 Weight lbs 6,385 6,680 Mast (v320) Closed Mast Height in 87 87 Lift Movement in 128 128 Height, Mast raised in 218 218 Platform Height in 8 8 Height, platform raised in 134 134 Basic Demension Picking Height in 197 198 Length (Fork Face) in 74 76 Width ( Drive / Load ) in 41 41 Wheel Base in 56 58Outer turning radius in 66 68 Performance Travel Speed(L/UL) mph 5.9 / 6.2 5.9 / 6.2 Lift Speed(L/UL) fpm 49 /69 47 / 69 Lower Speed(L/UL) fpm 75 / 75 75 / 75 Motor Traval Motor(S2=60 min.) kW 5.25.2Hydraulic Motor( S3=15%) kW 10.610.6Type of drive control AC AC Battery VoltageVolt 36 / 48 36 / 48 Weight lbs 1323 1609 3. Dimensions Specification 10BOP 13BOP Load Center c in 24 24 Load Distance x in 9.25 9.25 Wheel Base y in 56 58 Track Width( load) b11 in 36 36 Closed Mast Height h1 in 87 87 Lift Movement h3 in 128 128 Height, Mast raised h4 in 218 218 O.H.G Height h6 in 89 89 Length( Fork End) l1 in 121 123 Length( Fork Face) l2 in 74 76 Overall Width b1/b2 in 40 / 41 40 / 41 Fork Length l in 47 47 Platform Width b3 in 40; 49 40; 49 Outer turning radius Wa in 69.671.5 4. Dimensions ITEM Model 10BOP-7 13BOP-7 DRIVE MOTOR MAKER Prestolite CAPACITY (1 hour) 5.2 kw SPEED 2270 RPM Brake Maker WARNER ELECTRIC Model PK35 PUMP MOTOR MAKER Prestolite CAPACITY (15%) 10.6 kw SPEED 1688 RPM TRACTION CONTROLLER MAKER Zapi TYPE ACE0 CONTROLAC PUMP CONTROLLER MAKER Zapi TYPE ACE2 CONTROLAC 5. Dimensions ITEM Model 10BOP-7 13BOP-7 DRIVE UNIT MAKER ZF Gotha TYPE GK20 GEAR RATIO 14.5 PUMP MAKER HALDEX MODEL WK09 DISPLACEMENT 19.6cc/rev MAX.PRESSURE 210bar MCV MAKER Sun Hydraulics MODEL Proportional RATED FLOW 50LPM RELIEF PRESSURE 180bar EPS MAKER Zapi TYPE EPS-AC0 CONTROLAC 6. 10BOP and 13BOP Order Picker

Capacity

• 10BOP = 2,200 lbs

• 13BOP = 3,000 lbs

36V / 48Volt AC ZAPI System

Automatic Center Position System

Speed Control Reduction System

• Based on Steering Angle and Lifting Height

7. 10BOP and 13BOP Order Picker

Adjustable Travel Speeds

Regen / Plugging Performance Adjustments

Integrated Diagnostic System

Programmable Lift/Lower Cutouts

Low Noise Hydraulic Pump

Battery Side Panel Removal

8. Battery Compartment Dimensions

10BOP

• Compartment: 38.2 x 14.3 x 31.1

• 36V Battery: 18-125-11 / 625 amp hr

• • Battery Dimensions: 38 x 13-1/4 x 30-1/4

• 48V Battery: 24-125-07 / 375 amp hr

• • Battery Dimensions: 37.5 x 14.12 x 30.25

• Battery Connector and Position

• • SB350 Gray; B-20 inches

9. Battery Compartment Dimensions

13BOP

• Compartment: 38.2 x 16.3 x 31.1

• 36V Battery: 18-125-13 / 750 amp hr

• • Battery Dimensions: 38 x 15 5/8 x 30-1/4

• 48V Battery: 24-125-07 / 375 amp hr

• • Battery Dimensions: 37.5 x 14.12 x 30.25

• Battery Connector and Position

• • SB350 Gray; B-20 inches

10. ZAPPI AC Control System

Provides smooth operation

Various parameters can be adjusted

• Regen braking

• Performance modes

• Plugging

Anti roll back

11. Self-diagnostic LCD Monitor

No laptop and handset needed

Password activation

Performance mode selection

• H = High Performance

• N = Normal Performance

• E = Economy Performance

• T = Slow Performance

12. Self-diagnostic LCD Monitor

Various Displays

• Speed and acceleration

• Steer angle and travel direction

• Battery discharge level

• Hour meter and power mode

• Alarm code and diagnostic displays

13. Electronic Power Steering System

EPS controller communicates with AC CAN system

When the key is on, sensor detects position of drive wheel and returns the wheel to the center position

Steer angle limit- 180 degree

14. Ergonomic DesignedOperator Console

Performance Controls Conveniently Located

Effortless Brake Release

Convenience Trays

Heavy Duty Side Gates

Travel Alarm

Mesh Mast Screen

Pallet Clamps

15. Ergonomic DesignedOperator Console

Designed for enhanced efficiency and reduce operator fatigue

Multifunctional control lever

Excellent visibility of LCD monitor

Convenient access to toggle switches and horn

16. Directional Control Lever

Direction, lift, lower and horn functions on one lever

Convenient and efficient

Proportional functions for precise control

17. Operator Convenience

Overhead Guard mounted

• Work Lights

• Cooling Fan

• Compartment lamp

Large entry/exit handle

Left and Right Side Bars

• Must be lowered to operate truck

Work Lamp Room Lamp Cooling Fan Hand Rail Side Bar Safety Belt 18. Pallet Clamp

Adjustable Pallet Clamp

Accommodates various pallet width openings

Convenient ratchet type pedal and lock pedal for locking and releasing pallet

Lock Pedal ReleasePedal Adjustable Pallet Clamp 19. Travel Speed Limit

Travel controlled by lift height and steer angle

Travel limited if steer angle more than 10 degrees

Multiple switches used to determine height

• Travel deactivated at 18 feet and above

29.5 Steering Angle 10 26 23 19.5 16.5 13 10 6.5 3 0 1 2 2 2.5 33.5 45 5.5 6 Speed (mph) Fork Height (Ft) 20. Mast Visibility

Excellent visibility

• No interference from free lift cylinder

• Chains routed to outside of vision area

21. Ease of Maintenance

Components arranged for easy access

Excellent air flow

No tool swing out doors

Separate upper cover for battery access

22. Enhanced Hydraulic System

Proportional solenoid valve smooth control

Manual lowering valve

• Lower platform to ground level

Quick disconnect check point

Zero backlash gear pump

Hydraulic return filter

Emergency Lowering Pressure Check port ProportionalSolenoid V/V Adjustable Relief V/V 23. Brake System

Electromagnetic Brake System

• Mounted on traction motor

Activates when truck comes to a stop

Braking distance paramaters adjustable thru LCD monitor

24. Optional Guide Rollers

Guide Rollers Wheels

• For Rail Guidance System

Optional Widths

• 48; 49; 50; and 51

• • Up To 240 Mast

• 57; 58; and 59

• • 270 and Above

25. Mast and Fork Availability

Mast Size Availability

• Standard Mast is 2 Stage 128

• Optional 2 Stage Masts: 140; 163; 187; 211

• Optional 3 Stage Masts: 197, 209; 240; 270; 299; 321; 341 and 366

Fork Size Availability

• Standard Fork Size: 41

• Optional Fork Sizes: 35; 47; 53; 59 and 63

26. Standard Warranty

As of November 2010,Hyundai Forklift will warrant new equipment for 36 months or the first 4000 hours, which ever shall occur first

• Full Machine Coverage

• Includes Battery Forklifts

Hyundai Extended Warranty Program

• Please contact the main office for additional information

27. New Model Additions

50D-7E = 10,000 lb Capacity

60D-7E = 13,000 lb Capacity

80D-7E = 18,000 lb Capacity

70D-7E = 15,500 lb Capacity

• Introduced late 2010

All above models equipped with Hyundai D4DD 4 cylinder diesel engine

28. HYUNDAI FORKLIFT 70D-7E and 70DS-7 Series Model 70D-7E 70DS-7 Engine HMC D4DDMHI S6S-T Performance 98.6 hp @ 2300 rpms 91.2 hp @ 2300 rpms Maximum Torque 275 ft-lb @ 1600 rpms 260 ft-lb @ 1700 rpms Travel Speed 21.6 mph 22.0 mph VDI Cycle 4.5 Gallons per Hour 5.4 Gallons per Hour 29. Proven HMC D4DD Engine

In-Line 4 Cylinder Engine

• Turbo charger and charge air cooler

• • Enhanced combustion efficiency by controlling air flow at full loaded conditions

High PressureCommonRail Fuel System(HPCR)

• Optimizes fuel burn and greatly reduces fuel consumption

30. New Model Additions

180D-7E = 40,000 lb Capacity

250D-7E = 55,000 lb Capacity

Both models equipped with Cummins QSC diesel engine

Electric tilt Cab with Full Amenities

• Standard equipment

Side Shifting Fork Positioner

• Standard equipment

31. New Model Additions

50DA-7E

• 11,000 lb pneumatic tire compact chassis design based on the 45DS-7E

• Equipped with Mitsubishi S6S-T

• • 6 cylinder diesel engine

32. New Model Information

50D/ 60D/80D-7E

• Brochure released shortly

50DA-7E

• Included with 45DS-7E brochure

180D/250D-7E

• Anticipate brochure release shortly

33.

10/13BOP Order Picker

• Anticipate brochure release shortly

• Pricing release electronically Friday April 29 th

Entire Price Book To Be Updated in May to Include All New Models and Added Options

Web Casts in Mid May for New Models

New Model Information 34. BOP Order Picker Series Any Questions?