BOP Catalog

Invention, Innovation, and Engineering Creativity

Subsea Intervention Systems

Custom Design & Manufacture

Wellheads & Christmas Trees

Magnum Gate Valves

Blow Out Preventers

Manifold Systems

Ball Valves

Well Test Products

Worldwide Oilfield Machine

BOP CATALOG

3Worldwide Oilfield Machine, Inc.

WOMs BOPs .............................................................................. 4Ram Type Blowout Preventers .................................................... 5WU Specifications ....................................................................... 6WU Dimensional Data (Single) .................................................... 7WU Dimensional Data (Double) .................................................. 8WU Components ......................................................................... 9WU Part Numbers 7-1/16 3,000 - 11 15,000 .................................................. 10 13-5/8 3,000 - 21-1/4 2,000 .............................................. 11Hydraulic Control System .......................................................... 12Bonnet Rebuild Softgoods Kits Kit Part Numbers ................................................................ 13 Large Bore Shear Bonnets ................................................. 13Rams For WU BOP WU Pipe Ram ..................................................................... 14WU BOP Ram Part Numbers 7-1/16 3,000 - 11 15,000 .................................................. 15 13-5/8 3,000 - 21-1/4 2,000 .............................................. 16 20-3/4 3,000 ...................................................................... 16Care and Maintenance-WU BOPs............................................. 17WGK Annular BOP (Screwed) ................................................... 18WGK Annular BOP (Screwed) Part Numbers ............................ 19WGK Engineering and Dimensional Data ................................. 20WGK (Screwed) Engineering and Dimensional Data ................ 21WGK (Screwed) BOP Care and Maintenance ........................... 22Hydraulic Control System .......................................................... 23WGK Annular BOP (Latched) .................................................... 24WGK Engineering and Dimensional Data ................................. 26WGK (Latched) Part Numbers................................................... 25WGK (Latched) BOP Care and Maintenance ........................... 27MSP (Latched) ........................................................................... 28MSP (Latched) Part Numbers ................................................... 29WOMs BOP Facility .................................................................. 30WOM Facilities Worldwide ......................................................... 31

Table of Contents


WOM is licensed under API 6A and API 16A latest edition and has a fully implemented API Q1 quality system. The API 16A license not only applies to drill-thru equipment, but also Ram and Annular Type BOPs. WOM is certified to ISO 9001.

Designed to NACE MR-01-75 Materials Standards for resistance to sulfide stress cracking are standard.

Typical WOM WGK Annular and WU Ram Type BOP Assembly

WOMs BOPs


Ram Packing is generous and self-feeding

Operating Pressure is moderate, due to large piston area

Ram Change is quick and easy

All Working parts and control fluid passages are enclosed

Well Bore Pressure assist in holding rams closed

(2) Seals and a vent hole prevent well pressure from bleeding into operating cylinder

All Operating parts can be replaced on location

The U BOP is the most widely used BOP type in the world today. Its simple, compact design makes it well suited for operations offshore and onshore.

The one piece type WU ram provides a pressure energized seal and maximum contact area to the drill pipe.

WOMs ram type BOP operating system is designed to provide a fast and reliable closure around pipe or casing in the well bore. The sealing is energized by the pressure and is maintained even with loss of closing pressure.

Rams can be locked in closed position by optional wedge locks, locking screws and or hydraulic operating pressure

WU Ram Type BOP


The capital letters in the following designations refer to the WU BOP dimensional views and dimensions tables on page 5 and 6.

The following applications apply to typical WU type BOPs.

Side outlets to 4-1/16 can be provided beneath each set of rams on either or both sides of WU BOPs. Side outlets can be studded, open-faced flange, or clamp hub.

Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A or applicable standards. Type 6BX flanges are standard for 10,000 and 15,000 psi working pressures and for 5,000 psi for 13-5/8 and larger bore BOPs.

Hydraulic control connections for operation of rams and bonnets are 1 NPT. There are (2) connections for each set of rams. Wedgelock connections are 1/2 NPT.

The dimensions table (page 5 and 6) does not include spacers between rams for double ram models. WU BOPs with spacers to clear tool joints available upon request.

Large bore shearing bonnets are available for shearing high strenght pipe.

All WOM WU BOPs are suitable for H2S service as standard.

The WU BOP can be outfitted with Blind rams, Shearing/Blind rams, Pipe, Casing, or Tubing rams, or Variable bore rams.

A-1 Length: Bonnets closed, locking screws locked

A-2 Length: Bonnets opened, locking screws unlocked

A-3 Length: Bonnets closed, with wedgelocks

A-4 Length: Bonnets opened, with wedgelocks

B-1 Height: Flanged

B-2 Height: Clamp hubs

C Width: No side outlets

E-1 Centerline of side outlet to bottom flange face

E-2 Centerline of side outlet to bottom hub face

F-1 Top of upper ram to top flange face

F-2 Top of upper ram to top hub face

G Height of ram

H-1 Centerline of side outlet between rams to bottom flange face

H-2 Centerline of side outlet between rams to bottom hub face

J Top of lower ram to bottom of upper ram

WU Specifications


Single Open-Face Flange or Clamp Hub WU BOP Dimensions

WU Dimensional Data (Single)

C

C G

F

E

A

Top View Single WU BOP

Side View Single WU BOP


Double Open-Face Flange or Clamp Hub WU BOP Dimensions

WU Dimensional Data (Double)

C

B

G

J

E

G

F

H

A

Size

Pressure Rating (psi)

Vertical Bore A-1 A-2 A-3 A-4 B-1 B-2 C E-1 E-2 F-1 F-2 G H-1 H-2 J

Approx.Weight

(lbs)

7-1/16 3000 7-1/16 74.000 109.500 41.000 20.250 8.750 7.844 5.50 25.688 11.438 5000

7-1/16 5000 7-1/16 74.000 109.500 44.188 41.875 20.250 10.406 9.250 9.625 8.469 5.50 27.094 25.938 11.188 5200

7-1/16 10,000 7-1/16 74.000 109.500 48.625 42.250 20.625 11.062 9.375 21.031 10.344 5.50 29.125 27.438 12.562 6400

7-1/16 15,000 7-1/16 74.000 109.500 49.875 20.625 11.688 12.656 5.50 29,750 12.562 5750

11 3000 11 96.250 146.875 49.250 25.125 9.812 10.531 6.75 30.000 13.438 9900

11 5000 11 96.250 146.875 110.125 150.188 54.500 49.500 25.125 12.438 9.938 13.156 10.656 6.75 32.625 30.125 13.438 10,200

11 10,000 11 96.250 146.875 110.125 150.188 55.875 52.375 25.750 13.125 11.375 13.844 12.094 6.75 33.312 31.562 13.438 11,300

11 15,000 11 124.000 175.312 124.500 167.125 69.750 58.812 32.000 16.688 11.219 17.781 12.312 9.25 41.625 36.156 15.688 18,400

13-5/8 3000 13-5/8 112.125 171.500 122.688 166.062 53.375 29.250 10.312 11.531 7.50 32.375 14.562 14.300

13-5/8 5000 13-5/8 112.125 171.500 122.688 166.152 55.875 54.00 29.250 11.582 10.625 12.781 11.844 7.50 33.625 32.688 14.562 14,800

13-5/8 10,000 13-5/8 114.125 172.250 124.688 167.312 66.625 57.750 30.250 15.125 10.688 17.094 12.656 7.50 40.062 35.625 17.438 18,400

13-5/8 15,000 13-5/8 139.000 214.375 152.250 205.500 81.750 70.125 39.500 21.375 15.500 22.844 17.000 8.00 49.438 43.562 20.062 43,250

20-3/4 3000 20-3/4 143.688 226.812 163.938 223.875 66.125 58.875 39.516 14.312 10.688 66.281 12.656 8.00 39.875 36.250 17.562 25,550

21-1/4 2000 21-1/4 143.688 226.812 163.938 223.875 62.750 58.875 39.516 12.625 10.688 14.594 12.656 8.00 38.188 36.250 17.562 25,150

Top View Single or Double WU BOP

Side View Double WU BOP


WU Components

2518

1921

2040

41

35

23

15

16

38

17

30 3132

11

29

9

27

28

10

33

3637

14

7

2

24

6

26

5

42

12 13

8

3

22

34

LOCKING SCREW HOUSING

RAM CHANGE PISTON OPENRAM CHANGE PISTON CLOSERAM CHANGE CYLINDER

LOCKING SCREW HOUSING STUDLOCKING SCREW HOUSING NUTCHECK VALVE, PLASTIC PACKINGSCREW, PLASTIC PACKINGPIPE PLUG, PLASTIC PACKINGRING, PLASTIC PACKINGRING, PLASTIC ENERGIZINGCONNECTING ROD SEAL RINGBACK-UP RINGBONNET SEALRAM GUIDE PIN

O-RING, OPERATING PISTON TO INT. FLG.

TAIL ROD SEAL RINGO-RING, WIPING0-RING, RAM CHANGE PISTON TO BODYO-RING, RAM CHANGE PISTON TO INT. FLG.O-RING, RAM CHANGE CYLINDER TO INT. FLG.O-RING, RAM CHANGE CYLINDER TO BONNETO-RING, RAM CHANGE PISTON

CAP SCREW, INT. FLANGE TO BONNETBLEEDER GLANGBLEEDER PLUGPLASTIC PACKINGWASHERRETAINER RING

111

1111248811111121211111222224

112111

7

91011

14151617181920212223

25

2728293031323334353637394041

********

***********

******

COMPLETE BONNET SEAL REPLACEMENT KIT1

QTY. DESCRIPTION PART NO.ITEM

Q680645-01Q5940-09Q5930-05

Q17454-08Q17454-09Q7650-08

* INDICATES ITEMS INCLUDED IN COMPLETE BONNET SEAL REPLACEMENT KIT

Q30308-01Q49258-01Q30324Q30325Q30273-02

982-004-303

Q12469-36Q18586-12Q11741-37Q21792-21Q644197-01Q30313-02

Q18492-92

Q11741-32Q6227-34-01-70

Q18572-83Q2353-26

981-004-300Q6230-07-13-85Q6227-35-13-85

Q6227-41-13-85Q6227-32-13-85Q18491-73

Q6227-45-13-85

ALLALL

Q704774OPERATING PISTON LIP SEAL

O-RING, OPERATING CYLINDER Q6227-73-13-85

986-012-303Q30312-07

WEAR BAND, OPERATING PISTON Q49223-03

O-RING, BONNET BOLT RETAINER

971-059-001971-060-001STANDARD BONNET ASSEMBLY, LEFT HAND

STANDARD BONNET ASSEMBLY, RIGHT HAND

INTERMEDIATE FLANGEBONNET HOUSINGOPERATING PISTON

LOCKING SCREW

BONNET BOLT

Q30266-01Q30278-02Q667940

6

23

8

1213

OPERATING CYLINDER1

24

26

42

8

979-070-100

Q30274-025

WU BOP

10

Worldwide Oilfield Machine, Inc.

WU 7-1/16 3000 - 11 15,000 P/Ns Item Qty. Qty. 7-1/16 7-1/16 7-1/16 7-1/16 11 11 11 11 No. Description Single Double 3000 5000 10,000 15,000 3000 5000 10,000 15,000

1 Body 1 2 - - - - - - - -

2 Intermediate Flange 2 4 W-30266-03 W-30266-03 W-30266-01 W-30266-01 W-30267-03 W-30267-03 W-30267-03 W-49391-01

2A Intermediate Flange/Shear - - W-41499-03 W-41499-03 W-41499-01 W-41499-01 W-41457-03 W-41457-03 W-41457-03 -

3 Bonnet 2 4 W-30278-04 W-30278-03 W-30278-02 W-30278-01 W-30268-01 W-30268-02 W-30268-03 W-31241

4 Ram Assembly 2 4 W-644216-( ) W-644216-( ) W-644216-( ) 644216-( ) W-644219-( ) W-644219-( ) W-644219-( ) W-644222-( )

5 Operating Piston 2 4 W-667940 W-667940 W-667940 W-667940 W-673178 W-673178 W-673178 W-698481

5A Operating Piston/Shear - - W-49116-01 W-49116-01 W-49116-01 W-49116-01 W-698914 W-698914 W-698914 -

6 Operating Cylinder 2 4 W-30274-02 W-30274-02 W-30274-02 W-30274-02 W-30274-03 W-30274-03 W-30274-01

6A Operating Cylinder/Shear - - W-41365-02 W-41365-02 W-41365-02 W-41365-02 W-41365-03 W-41365-03 W-41365-03 -

7 Locking Screw Housing 2 4 W-30308-01 W-30308-01 W-30308-01 W-30308-01 W-30308-02 W-30308-02 W-30308-02 W-30308-03

8 Locking Screw 2 4 W-30326 W-30326 W-30326 W-30206 W-30365 W-30365 W-30365 W-30846

8A Locking Screw/Shear - - W-49258-01 W-49258-01 W-49258-01 W-49258-01 W-49258-01 W-49258-01 W-49258-01 -

9 Ram Change Piston/Open 2 4 W-30324 W-30324 W-30324 W-30324 W-30362 W-30362 W-30362 W-31239

10 Ram Change Piston/Close 2 4 W-30325 W-30325 W-30325 W-30325 W-30363 W-30363 W-30363 W-31238

11 Ram Change Cylinder 4 8 W-30273-02 W-30273-02 W-30273-02 W-30273-02 W-30273-03 W-30273-03 W-30273-03 W-30273-01

12 Bolt, Bonnet 8 16 W-30312-06 W-30312-06 W-30312-07 W-30312-01 W-30312-04 W-30312-03 W-30312-05 W-30312-12

12A Bolt, Bonnet/Shear - - W-41366-06 W-41366-06 W-41366-07 W-41366-22 W-41366-04 W-41366-03 W-41366-05 -

13 Stud, Locking Screw Housing 16 32 W-5913-26-10 W-5913-26-10 W-5913-26-10 W-5913-26-10 W-5915-25-10 W-5915-25-10 W-5915-25-10 W-38732-61-00-75

13A Stud, Locking Screw Housing/Shear - - W-38732-57-00-54 W-38732-57-00-54 W-38732-57-00-54 W-38732-57-00-54 W-38732-59-00-65 W-38732-59-00-65 W-38732-59-00-65 -

14 Nut, Locking Screw Housing 16 32 W-12955-11-10 W-12955-11-10 W-12955-11-10 W-12955-11-10 W-12955-17-10 W-12955-17-10 W-12955-17-10 W-12955-31-10

15 Check Valve, Plastic Packing 2 4 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01

16 Screw, Plastic Packing 2 4 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09

17 Pipe Plug, Plastic Packing 2 4 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05

18 Ring, Plastic Packing 2 4 W-12469-36 W-12469-36 W-12469-36 W-12469-36 W-12469-38 W-12469-38 W-12469-38 W-12469-38

19 Ring, Plastic Energizing 2 4 W-18586-12 W-18586-12 W-18586-12 W-18586-12 W-18586-13 W-18586-13 W-18586-13 W-18586-13

20 Seal Ring, Connecting Rod 2 4 W-11741-37 W-11741-37 W-11741-37 W-11741-37 W-11741-38 W-11741-38 W-11741-38 W-11741-38

21 Seal Ring, Back-up 4 8 - - W-21792-21 W-21792-21 W-21792-22 W-21792-22 W-21792-22 W-21792-2

22 Seal Bonnet 2 4 W-644197-01 W-644197-01 W-644197-01 W-644197-01 W-644197-02 W-644197-02 W-644197-02 W-49272-03

23 Pin, Ram Guide 4 8 W-30313-02 W-30313-02 W-30313-02 W-30313-02 W-30313-03 W-30313-03 W-30313-03 W-30313-01

24 O-Ring, Operating Cylinder 4 8 W-702640-44-61 W-702640-44-61 W-702640-44-61 W-702640-44-61 W-702640-45-11 W-702640-45-11 W-702640-45-11 W-702640-45-51

25 O-Ring, Operating Piston Rod to Int. Flange 2 4 W-18492-92 W-18492-92 W-18492-92 W-18492-92 W-18492-91 W-18492-91 W-18492-91 W-18492-91

26 Lip Seal, Operating Piston 2 4 W-710541 W-710541 W-710541 W-710541 W-710539 W-710539 W-710539 W-710538

27 Seal Ring, Tail Rod 2 4 W-11741-32 W-11741-32 W-11741-32 W-11741-32 W-11741-33 W-11741-33 W-11741-33 W-11741-34

28 O-Ring, Wiping 2 4 W-702640-33-11 W-702640-33-11 W-702640-33-11 W-702640-33-11 W-702640-33-51 W-702640-33-51 W-702640-33-51 W-702640-33-71

29 O-Ring, Ram Change Piston to Body 4 8 W-18491-73 W-18491-73 W-18491-73 W-18491-73 W-702640-32-61 W-702640-32-61 W-702640-32-61 W-702640-32-81

30 O-Ring, Ram Change Piston Rod to Int. Flg. 4 8 W-702640-32-91 W-702640-32-91 W-702640-32-91 W-702640-32-91 W-702640-33-11 W-702640-33-11 W-702640-33-11 W-702640-33-31

31 O-Ring, Ram Change Cylinder to Int. Flg. 4 8 W-702640-33-81 W-702640-33-81 W-702640-33-81 W-702640-33-81 W-31423-25-13-85 W-31423-25-13-85 W-31423-25-13-85 W702640-34-61

32 O-Ring, Ram Change Cylinder to Bonnet 4 8 W-702640-34-21 W-702640-34-21 W-702640-34-21 W-702640-34-21 W-31423-26-13-85 W-31423-26-13-85 W-31423-26-13-85 W-702640-42-51

33 O-Ring, Ram Change Piston 4 8 W-702640-33-21 W-702640-33-21 W-702640-33-21 W-702640-33-21 W-702640-33-51 W-702640-33-51 W-702640-33-51 W-702640-33-81

34 O-Ring, Bonnet Bolt Retainer 8 16 W-702640-22-31 W-702640-22-31 W-702640-22-31 W-702640-23-21 W-702640-22-71 W-702640-22-91 W-702640-23-41 W-702640-23-91

35 Cap Screw, Int. Flg. to Bonnet 16 32 W-702585-22-00-50 W-702585-22-00-50 W-702585-22-00-50 W-702585-22-00-50 W-702585-22-00-50 W-702585-22-00-50 W-702585-22-00-50 W-702585-25-00-54

36 Gland Bleeder 2 4 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08

37 Plug, Bleeder 2 4 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09

38 Lifting Eye 2 4 W-11849 W-11849 W-11849 W-11849 W-11849 W-11849 W-11849 W-11849

39 Packing, Plastic 10 20 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08

40 Washer 2 4 W-2353-26 W-2353-26 W-2353-26 W-2353-26 W-2353-27 W-2353-27 W-2353-27 W-2353-27

41 Retainer Ring 2 4 W-18572-83 W-18572-83 W-18572-83 W-18572-83 W-18572-84 W-18572-84 W-18572-84 W-18572-84

42 Wear Ring, Operating Piston 2 4 W-49223-03 W-49223-03 W-49223-03 W-49223-03 W-49223-02 W-49223-02 W-49223-02 W-49223-01

43 Spacer, Shear - - W-687117-01 W-687117-01 W-687117-01 W-687117-01 W-687117-02 W-687117-02 W-687117-02 W-687117-03

11


WU 13-5/8 3000 - 21-1/4 2000 P/Ns Item Qty. Qty. 13-5/8 13-5/8 13-5/8 13-5/8 20-3/4 21-1/4 No. Description Single Double 3000 5000 10,000 15,000 3000 2000

1 Body 1 2 - - - - - -

2 Intermediate Flange 2 4 W-30270-01 W-30270-01 W-31216 W-698899 W-30911-01 W-30911-01

2A Intermediate Flange/Shear - - W-686242 W-686242 W-686767 - W-41496-01 W-41496-01

3 Bonnet 2 4 W-30284-02 W-30284-01 W-31241 W-691849 W-30835-01 W-30835-02

4 Ram Assembly 2 4 W-644225-( ) W-644225-( ) W-644225-( ) W-644228-( ) W-44256-( ) W-44256-( )

5 Operating Piston 2 4 W-679816 W-679816 W-678512 W-698996 W-690058 W-690058

5A Operating Piston/Shear - - W-687542 W-687542 W-690791 - W-693405 W-693405

6 Operating Cylinder 2 4 W-30274-01 W-30274-01 W-30274-01 W-30274-06 W-30274-04 W-30274-04

6A Operating Cylinder/Shear - - W-41365-01 W-41365-01 W-41365-01 - W-41365-04 W-41365-04

7 Locking Screw Housing 2 4 W-30308-03 W-30308-03 W-30308-03 W-30308-06 W-30308-04 W-30308-04

8 Locking Screw 2 4 W-30307 W-30307 W-30307 W-695234 W-30846 W-30846

8A Locking Screw/Shear - - W-30846 W-30846 W-30846 - W-34233 W-34233

9 Ram Change Piston/Open 2 4 W-30310 W-30310 W-31239 W-38847 W-30848 W-30848

10 Ram Change Piston/Close 2 4 W-30309 W-30309 W-31238 W-38848 W-30849 W-30849

11 Ram Change Cylinder 4 8 W-30273-01 W-30273-01 W-30273-01 W-30273-06 W-30273-04 W-30273-04

12 Bolt, Bonnet 8 16 W-30312-09 W-30312-01 W-30312-12 W-30312-25 W-30312-04 W-30312-03

12A Bolt, Bonnet/Shear - - W-41366-09 W-41366-01 W-5918-76-10 - W-41366-10 W-41366-11

13 Stud, Locking Screw Housing 16 32 W-5918-76-10 W-5918-76-10 W-5918-76-10 W-5918-34-10 W-5918-76-10 W-5918-76-10

13A Stud, Locking Screw Housing/Shear - - W-38732-61-00-75 W-38732-61-00-75 W-38732-61-00-75 - W-38732-61-00-75 W-38732-61-00-75

14 Nut, Locking Screw Housing 16 32 W-12955-31-10 W-12955-31-10 W-12955-31-10 W-12955-31-10 W-12955-31-10 W-12955-31-10

15 Check Valve, Plastic Packing 2 4 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01 W-680645-01

16 Screw, Plastic Packing 2 4 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09 W-5940-09

17 Pipe Plug, Plastic Packing 2 4 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05 W-5930-05

18 Ring, Plastic Packing 2 4 W-12469-24 W-12469-24 W-12469-24 W-12469-24 W-12469-24 W-12469-24

19 Ring, Plastic Energizing 2 4 W-18586-01 W-18586-01 W-18586-01 W-18586-01 W-18586-01 W-18586-01

20 Seal Ring, Connecting Rod 2 4 W-11741-36 W-11741-36 W-11741-36 W-11741-36 W-11741-36 W-11741-36

21 Seal Ring, Back-up 4 8 - - W-21792-26 W-21792-26 - -

22 Seal Bonnet 2 4 W-644197-03 W-644197-03 W-644197-03 W-49272-02 W-644197-06 W-644197-06

23 Pin, Ram Guide 4 8 W-30313-01 W-30313-01 W-30313-01 W-30313-08 W-30313-04 W-30313-04

24 O-Ring, Operating Cylinder 4 8 W-702640-45-51 W-702640-45-51 W-702640-45-51 W-702640-46-11 W-702640-45-51 W-702640-45-51

25 O-Ring, Operating Piston Rod to Int. Flange 2 4 W-18492-90 W-18492-90 W-18492-90 W-18492-90 W-18492-90 W-18492-90

26 Lip Seal, Operating Piston 2 4 W-710538 W-710538 W-710538 W-710542 W-710538 W-710538

27 Seal Ring, Tail Rod 2 4 W-11741-34 W-11741-34 W-11741-34 W-11741-45 W-11741-34 W-11741-34

28 O-Ring, Wiping 2 4 W-702640-33-71 W-702640-33-71 W-702640-33-71 W-702640-34-21 W-702640-33-71 W-702640-33-71

29 O-Ring, Ram Change Piston to Body 4 8 W-702640-32-81 W-702640-32-81 W-702640-32-81 W-702640-33-21 W-702640-33-61 W-702640-33-61

30 O-Ring, Ram Change Piston Rod to Int. Flg. 4 8 W-702640-33-31 W-702640-33-31 W-702640-33-31 W-31423-21-13-85 W-702640-34-11 W-702640-34-11

31 O-Ring, Ram Change Cylinder to Int. Flg. 4 8 W-702640-34-61 W-702640-34-61 W-702640-34-61 W-702640-34-61 W-702640-43-71 W-702640-43-71

32 O-Ring, Ram Change Cylinder to Bonnet 4 8 W-702640-42-51 W-702640-42-51 W-702640-42-51 W-702640-43-41 W-702640-43-91 W-702640-43-91

33 O-Ring, Ram Change Piston 4 8 W-702640-33-81 W-702640-33-81 W-702640-33-81 W-702640-34-41 W-702640-42-91 W-702640-42-71

34 O-Ring, Bonnet Bolt Retainer 8 16 W-702640-23-11 W-702640-23-21 W-702640-23-91 W-702640-24-51 W-702640-22-91 W-702640-22-91

35 Cap Screw, Int. Flg. to Bonnet 16 32 W-702585-25-00-44 W-702585-25-00-44 W-702585-25-00-44 W-702585-31-00-54 W-702585-22-00-50 W-702585-22-00-50

36 Gland Bleeder 2 4 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08 W-17454-08

37 Plug, Bleeder 2 4 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09 W-17454-09

38 Lifting Eye 2 4 W-11849 W-11849 W-11849 W-11849 W-11849 W-11849

39 Packing, Plastic 10 20 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08 W-7650-08

40 Washer 2 4 W-689523-01 W-689523-01 W-689523-01 W-689523-01 W-689523-01 W-689523-01

41 Retainer Ring 2 4 W-18572-85 W-18572-85 W-18572-85 W-18572-85 W-18572-85 W-18572-85

42 Wear Ring, Operating Piston 2 4 W-49223-01 W-49223-01 W-49223-01 W-49223-04 W-49223-10 W-49223-10

43 Spacer, Shear - - W-687117-03 W-687117-03 W-687117-03 W-687117-05 W-687117-03 W-687117-03

12


The ram close hydraulic circuit is shown in red on the above caption. The closing ratio (the ratio of well pressure to operating piston pressure needed to close rams) for most Type WU Preventers is 7:1. The ram closing pressure also serves to open the bonnets for ram change. When the bonnet bolts are unscrewed and closing pressure is applied, pressure pushes the ram inward and at the same time moves the bonnet away from the Preventer body. Even though the ram moves inward, the bonnet stroke is sufficient to bring the ram into the clear for handling. An eyebolt is furnished on each end of the Preventer body which can be screwed into the top of each ram for lifting.

The ram open hydraulic circuit is shown in gray on the above caption. Ram opening pressure also serves to close the bonnets. Hydraulic control pressure draws the bon-nets tightly against the Preventer body; bolts serve only to hold bonnets closed. An im-portant feature of the Type WU hydraulic system is that the rams are pulled back close to the bonnets before the bonnets begin moving toward the Preventer body. Because of this, rams never interfere with pipe in the hole or otherwise obstruct the vertical bore. Rams may be changed, in an emergency, when the well is blowing, thereby increasing the security provided by the Preventers.Pressure Required: The rated continuous working pressure for the Type WU BOP operating system is 1,500 psi. Pressures of 300 to 500 psi normally provide satisfactory operation. Pressures in excess of 1,500 psi may be required in 10,000 and 15,000 psi Preventers to close the rams against high well pressures. In emergencies, pressures up to 5,000 psi can be applied to the hydraulic controls. For optimum seal life, the applied hydraulic pressure should be limited to 1,500 psi, especially when it is customary to hold ram open pressure on Preventers continuously. When a 3,000 psi accumulator is used to store maximum energy for Preventer operation, a pressure regulator should be used to control pressure applied to the Preventer.

Operating Fluids: Light hydraulic oil is the recommended operating fluid for Type WU Preventers. Any type is satisfactory except fuel oil, which causes rubber seals to swell and deteriorate. The use of water as an operating medium is satisfactory provided soluble oil is added to prevent corrosion and antifreeze is added when necessary. Should an emergency require the use of drilling mud pressure to operate a Preventer, the Preventer should be torn down, thoroughly cleaned and all seals carefully checked for excessive wear as soon as practical thereafter.

Hydraulic Control System

13


Kit P/Ns

Bonnet Rebuild Softgoods Kit

BOPSize

Pressure RatingBonnet Type

KitP/N

7-1/16 3000, 5000 & 10,000, 15,000 psi W-644909-01

11 3000, 5000 & 10,000 psi W-644909-02

11 15,000 psi W-644831-08

13-5/8 3000, 5000 & 10,000 psi W-644909-03

13-5/8 15,000 psi W-644831-12

20-3/4 3000 psi W-644831-17

21-1/4 2000 psi W-644831-18

For Popular size WU BOPs, a bonnet rebuild softgoods kit is available to provide all parts required to reseal the operating system.

Large Bore Shear BonnetsItemNo.

Description(2 Required per Cavity)

113000

115000

1110,000

1115,000

13-5/83000

13-5/85000

13-5/810,000

13-5/815,000

20-3/43000

21-1/42000

* Bonnet Assembly (Right) W-615195-01 W-615194-01 W-614596-01 W-615419-01 W-614596-01 W-615191-01 W-614498-01 W-615540-01 W-615526-01 W-615525-01

* Bonnet Assembly (Left) W-615195-02 W-615194-02 W-614596-02 W-615419-02 W-615196-02 W-614191-01 W-614498-02 W-615540-02 W-615-526-02 W-615525-02

2 Intermediate Flange/Shear W-615188-01 W-615188-01 W-615188-01 W-615459-01 W-615192-01 W-615192-01 W-614766-01 W-615538-01 W-615523-01 W-615523-01

3 Bonnet/Shear W-615189-03 W-615189-02 W-615189-01 W-615640-01 W-615143-02 W-615143-01 W-614772-01 W-615448-01 W-615522-01 W-615522-02

4 Operating Piston/Shear W-615190-01 W-615190-01 W-615190-01 W-615457-01 W-615209-01 W-615209-01 W-614760-01 W-615539-01 W-615524-01 W-615524-01

5 O-Ring, Int. Flng. to Bonnet Lip W-702640-45-51 W-702640-45-51 W-702640-45-51 W-702645-45-81 W-702640-45-51 W-702640-45-51 W-702640-45-51 W-702645-46-51 W-702640-45-51 W-702640-45-51

6 Lip Seal, Operating Piston/Shear W-710586 W-710586 W-710586 W-710542 W-710542 W-710542 W-710542 W-710588 W-710542 W-710542

7 Wear Ring, Operating Piston/Shear W-49223-15 W-49223-15 W-49223-15 W-049223-04 W-49223-04 W-49223-04 W-49223-04 W-049223-17 W-49223-14 W-49223-14

Large bore shear bonnets provide a larger operating piston to increase shearing force.

42A

26A

24A

3A

2A

5A

42A

26A

24A

3A

2A

5A

WU BOP Shear Bonnet Assembly

14


WU BOP Pipe RamsWU BOP pipe rams are available to fit a wide variety of tubing, drill pipe, drill collar, and casing sizes. All rams are suitable for H2S service per NACE specifications. WU BOP ram packers are self-feeding with a large reserve of elastomer to ensure a long-lasting seal under all conditions. Ram packers lock into place and cannot be dislodged by well flow.

WU BOP Variable Bore RamsOne set of WU BOP variable bore rams can be used to seal on a range of pipe. WOMs WU BOP variable bore ram packers contain steel reinforcing inserts similar to those in the annular BOP packer. The inserts rotate inward when the rams are closed so the steel provides support for the rubber which seals against the pipe.

WU BOP Shearing Blind RamsWU BOP shearing blind rams shear the pipe in the hole, then bend the lower section of sheared pipe to allow the rams to close and seal. Shearing blind rams can be used as blind rams during normal drilling operations.

Rams for WU BOPs

Variable Bore Rams

Pipe Rams

Shearing Blind Ram

15


WU BOP Ram P/NsPipeSize

7-1/16 U BOP3000, 5000 & 10,000, 15000 psi WP

Top Seal 644214-01

11 U BOP3000, 5000 & 10,000 psi WP

Top Seal 644217-01

11 U BOP15,000 psi WP

Top Seal 644220-01Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer

Blind W-644504-01 W-644500-01 W-644215-01 W-644219-01 W-44118-01 W-644218-01 W-644222-01 W-44121-01 W-644221-011.050 W-644504-02 W-644501-01 W-644215-02 1.315 W-644504-03 W-644501-02 W-644215-03 W-44233-25 W-44118-07 W-19243-08 1.660 W-644504-04 W-644501-03 W-644215-04 W-44233-02 W-44118-02 W-19243-06 W-644222-02 W-44121-02 W-644221-021.900 W-644504-05 W-644501-04 W-644215-05 W-44233-03 W-44118-03 W-19243-05 W-644222-03 W-44121-03 W-644221-032.062 W-644504-06 W-644501-05 W-644215-06 W-44233-04 W-44118-04 W-19243-04 W-644222-04 W-44121-04 W-644221-042.375 W-644504-07 W-644501-06 W-644215-07 W-644219-06 W-44118-05 W-644218-06 W-644222-05 W-44121-05 W-644221-052.875 W-644504-08 W-644501-07 W-644215-08 W-644219-07 W-44118-06 W-644218-07 W-644222-06 W-44121-06 W-644221-063.500 W-644504-09 W-644502-01 W-644215-09 W-644219-08 W-644835-01 W-644218-08 W-644222-07 W-644753-01 W-644221-074.000 W-644216-11 W-44104-02 W-19474-02 W-644219-10 W-44119-02 W-644218-10 W-44234-10 W-44122-04 W-690808-094.500 W-644216-12 W-44104-03 W-19474-03 W-644219-11 W-644835-02 W-644218-11 W-644222-09 W-644753-02 W-644221-094.750 W-44233-12 W-44119-04 W-19374-04 5.000 W-644216-14 W-44104-04 W-19474-04 W-644219-14 W-644835-03 W-644218-14 W-644222-10 W-644753-03 W-644221-105.500 W-644216-15 W-44104-07 W-19474-06 W-644219-16 W-44120-01 W-644218-16 W-44234-13 W-44123-01 W-690808-125.750 W-44233-23 W-44120-10 W-644218-17 6.000 W-44233-16 W-44120-02 W-19375-02 W-44234-14 W-44123-02 W-690808-136.625 W-44233-17 W-64435-04 W-19375-03 W-44234-15 W-644753-04 W-690808-147.000 W-44233-18 W-44120-04 W-19375-04 W-44234-16 W-44124-01 W-690808-157.625 W-44233-19 W-44120-05 W-19375-05 W-44234-17 W-44124-02 W-690808-167.750 W-44233-22 W-44120-09 W-19375-11 8.625 W-44233-20 W-44120-06 W-19375-06 9.000 9.625

10.750 11.750 13.375 13.625 13.750 16.000 18.625 20.000

16


PipeSize

13-5/8 U BOP3000, 5000 & 10,000 psi WP

Top Seal 644223-01

13-5/8 U BOP15,000 psi WP

Top Seal 644226-01

21-1/4 Bore 2000 psi20-3/4 Bore 3000 psi

Top Seal 19514Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer

Blind W-644225-01 W-44147-01 W-644224-01 W-64428-01 W-44143-01 W-644227-01 W-44256-01 W-44149-01 W-19249-031.050 1.315 W-644225-02 W-44148-06 W-644224-02 1.660 W-644225-03 W-44148-05 W-644224-03 1.900 W-644225-04 W-44148-07 W-644224-04 2.062 W-644225-05 W-44148-03 W-644224-05 W-44243-02 W-44144-03 W-40910-20 2.375 W-644225-06 W-44148-01 W-644224-06 W-644228-03 W-44144-01 W-644227-03 2.875 W-644225-07 W-44148-02 W-644224-07 W-644228-04 W-44144-02 W-644227-04 3.500 W-644225-08 W-644738-01 W-644224-08 W-644228-05 W-644739-01 W-644227-05 W-44256-02 W-645328-01 W-31228-03

4.000 W-644225-10 W-44149-02 W-644224-10 W-644228-07 W-44144-06 W-644227-07 W-44256-03 W-44192-02 W-31228-04

4.500 W-644225-11 W-644738-02 W-644224-11 W-644228-08 W-644739-02 W-644227-08 W-44256-04 W-645328-02 W-31228-054.750 W-644225-13 W-44150-01 W-644224-13 W-44243-11 W-44144-09 W-40910-07 W-44256-05 W-44192-04 W-31228-065.000 W-644225-14 W-644738-03 W-644224-14 W-644228-11 W-644739-03 W-644227-11 W-44256-06 W-645328-03 W-31228-075.500 W-644225-16 W-44150-03 W-644224-16 W-44243-12 W-44145-03 W-40910-08 W-44256-07 W-44193-02 W-31228-085.750 6.000 W-44244-13 W-44150-04 W-31215-09 W-44243-14 W-44145-04 W-40910-09 W-44256-08 W-44193-03 W-31228-096.625 W-644225-18 W-644738-04 W-644224-18 W-44243-15 W-644739-04 W-40910-10 W-44256-09 W-645328-04 W-31228-107.000 W-644225-19 W-44151-01 W-644224-19 W-44243-16 W-44146-01 W-40910-11 W-44256-10 W-44193-05 W-31228-117.625 W-44244-15 W-44151-02 W-19506-04 W-44243-17 W-44146-02 W-40910-12 W-44256-11 W-44193-06 W-31228-127.750 W-44244-25 W-44151-06 W-19506-09 W-44243-22 W-44146-07 W-40910-23 8.625 W-44244-16 W-44151-03 W-19506-05 W-44243-18 W-44146-03 W-40910-13 W-44256-13 W-44193-08 W-31228-149.000 W-44244-24 W-44151-04 W-19506-06 W-44243-19 W-44146-04 W-40910-14 W-44256-14 W-44193-09 W-31228-159.625 W-644225-24 W-44151-05 W-644224-24 W-44243-20 W-44146-05 W-40910-15 W-44256-15 W-44193-10 W-31228-16

10.750 W-44244-18 W-44152-01 W-38372 W-44243-21 W-44146-06 W-40910-22 W-44256-16 W-44194-01 W-31228-1711.750 W-44244-26 W-614208-01 W-614227-01 W-44256-17 W-44194-02 W-31228-1813.375 W-44256-18 W-44194-03 W-19252-0413.625 W-44256-21 W-44194-05 W-31228-2413.750 W-44256-19 W-44194-04 W-31228-1916.000 W-44256-20 W-44195-01 W-31228-2118.625 W-44256-22 W-614459 W-31228-2520.000

WU BOP Ram P/Ns

17


WU BOP Care and MaintenanceDaily or Trip Care: All BOPs should be operated daily. Blind

rams should be operated every time pipe is out of the hole. Pipe rams should not be closed except when pipe is in the preventer, to avoid extruding the packer.

Care Between Wells: Whenever a preventer is removed from a drilling hookup, it should be carefully cleaned, the rams removed, cleaned, inspected, and lubricated. Also, the ram bore should be cleaned, inspected, and lubricated. Any burrs or galled spots should be buffed. The operating system should be thoroughly flushed to remove sediment or foreign material.

Periodic Overhaul: Annually, or more often depending on the type of service, a preventer should be completely disassembled and all parts cleaned, inspected, and reconditioned or replaced. All rubber seals should be replaced except ram packings which should be replaced according to condition.

Testing: At regular intervals, weekly if possible, the complete drilling hookup and choke manifold should be tested for pressure holding ability and correct operation.

Lubricants: (Ram Lubricant) Any water resistant grease or heavy oil can be used as a ram and ram bore lubricant. (Thread Lubricant) Metallic Zinc Base Grease.

Storage: When a preventer is put in storage, the rams should be removed and the preventer thoroughly cleaned, all moving parts greased, and all machined surfaces oiled and greased, particularly the ram bores and the flange ring grooves. Preventers in storage should be filled with a hydraulic fluid.

WOMs WU Ram Type BOP

18


WGK Annular Type BOPWOMs Type WGK BOP was designed especially for surface installations.

The WGK is a universal annular blowout preventer with a long record of proven, quality performance.

Standard operation requires both opening and closing pressure.

Seal-off is effected by hydraulic pressure applied to the closing chamber which raises the piston, forcing the packing unit into a sealing engagement.

Any normal closing unit having a separate pressure regulator valve for the annular BOP and sufficient accumulator volume can be used to operate the WGK.

The WGK is designed to be well pressure assisted in maintaining packing unit seal off once initial seal off has been effected. As well pressure further increases, closure is maintained by well pressure alone.

Large Pressure Energized Seals are used for dynamically sealing piston chambers to provide safe operation, long seal life, and less maintenance.

Piston Sealing Surfaces Protected by Operating Fluid lowers friction and protects against galling and wear to increase seal life and reduce maintenance.

Operating Chambers are Tested to Full BOP Working Pressure to ensure strength, reliability, and the ability to over-pressurize the chambers in emergencies.

17

19

2

29

3

1

418

5

WGK 7-1/16 3000 - 13-5/8 5000(Screwed)

9

10

30

7

69

8

9

F/10,000 PSI& Above

12

11

12

F/10,000 PSI& Above

12

11

12

F/10,000 PSI& Above

Exploded View - WGK BOP (Screwed)

19


WGK Annular Type BOP (Screwed) P/NsItem Part

Name7/163000

7/165000

7/1610000

7/1615000

113000

115000

13-5/83000

13-5/85000

1 Head W1002013-03 W1002023-03 W1002043-03 W1004083-03 W1002123-03 W1002143-04 W1002183-03 W1002203-03

2 Packing UnitRubberSynthetic RubberNeoprene

W1003252-01W1003252-02W1003252-03

W1003253-01W1003253-02W1003253-03

W1003254-01W1003254-02W1003254-03

W1006518-01W1006518-02W1006518-02

W1003259-01W1003259-02W1003259-03

W3105057-01W3105057-02W3105057-03

W1003262-01W1003262-02W1003262-03

W1002114-01W1002114-02W1002114-03

3 Piston W1002015 W1002025 W1002045 W1004085 W1002125 W1002145 W1002185 W1002205

4 Cage W1006148 W1002057 W1001712 W9210750-04 W1004201 W1004201 W1004852 W1002207

5 BodyFlangedStudded

W1002011-01W1002011-03

W1002021-01W1002021-03

W1002041-02W1002041-03

W9210750-01-

W1002121-01W1002121-03

W1002141-02W1002141-04

W1002181-01W1002181-03

W1002201-01W1002201-03

6 Head Gasket W31602 W30690 - W9690750-01 W31809 W31402 W30738 W38150

7 Head Seal - - - W9690750-02 - - - -

8 U-Seal, Upper W31603 W30689 W39445 W9690750-03 W31808 W31403 W30736 W38151

9 U-Seal, Mid W31604 W30688 W39447 9690750-04 W31807 W30736 W1002684 W38152

10 U-Seal, Lower W15614 W30705 W39449 - W31604 W32599 W30735 W38165

11 Dbl U-Seal, Upper - - - W9690750-05 - - - -

12 Nonextrusion Ring, Upper - - W39446 W9690750-06 - - - -

13 Dbl U-Seal, Middle - - - - - - - -

14 Nonextrusion Ring, Middle - - W39448 W9690750-07 - - - -

15 Dbl U-Seal, Lower - - - W9690750-08 - - - -

16 Nonextrusion Ring, Lwr - - W39450 - - - - -

17 Pipe Plug, Piston Indicator W1900065-05 W1900065-05 W1900065-05 W9721660-01 W1900065-05 W1900065-05 W1900065-05 W1900065-05

18 Body Sleeve Capscrew W1920026-10010 W1920026-10012 W1920026-10014 W9811563-08 W1920026-12012 W1920026-12012 W1920026-12012 W1920026-10010

19 Head Lock Screw W1002069 W1002191-1 W1900049-12012 - W1002069 W1002149 W1002191-2 W1002149

20 Lock Collar - - W1002325 - - - - -

21 Jaw - - - - - - - -

22 Jaw Operating Screw - - - - - - - -

23 Cap Screw, Jaw Holding - - - - - - - -

24 Seal, Jaw Hldg Cap Scrw - - - - - - - -

25 Nonextrusn Ring, Jaw Hldg Capscrw - - - - - - - -

26 O-Ring, Jaw Oprtng Screw - - - - - - -

27 Relief Fitting - - - - - - - -

29 Wear Plate W1002036 W1002036 W1002034 W9210750-15 W1001778 W1004203 W1004855 W1001788

30 Cap Screw, Wear Plate W1920026-08007 W1920026-08007 W1920026-08007 W9810223-00 W1920026-08007 W1920026-08007 W1920026-08007 W1900097-08006

31 Spacer Sleeve - - - - - - - -

32 Sleeve Screw - - - - - - - -

33 Pipe Plug - - - - - - - -

34 Head Clamp - - - - - - - -

35 Head Clamp, Cap Screw - - - - - - - -

20


WGK Annular Type BOPOnly Two Moving Parts (piston and packing unit) on the Annular BOP mean few areas are subject to wear. The BOP is safer and more efficient, requiring less maintenance and downtime.

Long Piston with a length to diameter ratio approaching one eliminates tendencies to cock and bind during operations with off-center pipe or unevenly distributed accumulations of sand, cuttings, or other elements. This design enhances the ability of the packing unit to reopen to full bore position.

Conical Bowl Design of the Piston provides a simple and efficient method of closing the packing unit.

Field Replaceable Wear Plate in the BOP Head serves as an upper non-sealing wear surface for the movement of the packing unit, making field repair fast and economical.

Maximum Packing Unit Life is possible with the provision for measuring piston stroke. This measurement indicates remaining packing unit life without disassembly and ensures the longest and safest use of the packing unit.

Three Choices of Packing Unit Rubber Compounds permit more flexible applications.

Screwed Head Design of the WGK BOP is a simple, efficient, and strong method of connecting the head to the body for safe operation with no loose parts to be lost down hole or overboard.

WOMs WGK Annular BOP

A

C

B

A - HeightB - Body DiameterC - Clearence Diameter

See Engineering andand Dimensional Dataon Page 18

21


WGK Engineering and Dimensional Data7-1/16 - 3M 7-1/16 - 5M 7-1/16 - 10M 7-1/16 - 15M 11 - 3M

Head Type Screwed Screwed Screwed Screwed Screwed

Operating ChamberVolume (Gal)

ClosingOpening

2.852.24

2.852.24

9.427.08

11.27.50

7.435.54

Full Piston Stroke 4-1/8 4-1/8 5-1/2 5-1/2 6-1/8Body Diameter (B) 25.25 26.00 43.75 50.00 33.75

Clearance Diameter (C) 29.25 30.00 49.50 61.00 40.00Height (A)

Flanged BottomStudded Bottom

Hub Bottom

31.1927.0030.38

33.6227.5031.62

48.125

47.125

51.12548.875

39.7534.37538.125

Weight (lbs)Flanged BottomStudded Bottom

Hub Bottom

260024702550

300027702825

12,200

11,900

14,250

5,5005,1405,350

Standard Ring GrooveFlanged BottomStudded Bottom

Hub Bottom

RX45RX45RX45

RX467RX46

RX158

BX156

BX156

BX156BX156

RX53RX53RX53

11 - 5M 11 - 10M 13-5/8 - 3M 13-5/8 - 5M 13-5/8 - 10MHead Type Screwed Screwed Screwed Screwed Screwed


ClosingOpening

9.817.98

25.1018.97

11.368.94

17.9814.16

37.1826.50

Full Piston Stroke 7-1/8 8 7-1/8 8-1/2 10-1/2Body Diameter (B) 37.50 56.50 40.50 45.50 61.00

Clearance Diameter (C) 44.25 61.50 47.50 52.25 68.125Height (A)


Hub Bottom

47.812539.62544.875

63.5055.00

61.125

45.2539.37543.00

51.12546.5051.50

71.37560.62566.875


Hub Bottom

820077507920

26,14025,46026,000

8,7848,5228,650

13,80013,100

33,52532,85032,785

Standard Ring GrooveFlanged BottomStudded Bottom

Hub Bottom

RX54RX54RX54

BX158BX158BX158

RX57RX57RX57

BX160BX160BX160

BX159BX159BX159

22


WGK BOP Care and Maintenance (Screwed)Inspect upper and lower connections for pitting, wear, and damage; especially in ring grooves and stud bolt holes. Worn or damaged ring grooves must be welded, machined, and stress relieved. Worn or damaged stud bolt holes can be drilled and tapped to the next larger size and fitted with step-studs.

Check the body for wear and damage-especially in the internal cylinder walls for pits and vertical scores. Minor pits and scores can be removed in the field with emery cloth. Repaired surface should be coated with silicon grease or castor oil. Severe pits and scores may require machining and/or welding which should be performed in a WOM approved machine shop.

Inspect the vertical bore for wear and damage from drill string and drill tools; especially in the area of the ring grooves. If wear is excessive, the area must be repaired.

Check the inner body sleeve for wear, damage, and looseness. Check slots in sleeve for cuttings which may restrict piston movement.

Check for piston damage and wear; especially the inner and outer walls for pits and vertical scores and the tapered bowl for pits and gouges. Minor pits and scores on the walls can be removed in the field with emery cloth.

Check the wear plate in the inner bottom face of the head for wear. In addition to the aging process of time and use, wear of this metal surface is produced by the combination of vertical and lateral forces.

Inspect the packing unit for wear, cracking, hardness, and correct elastomer composition.

Check seal ring for nicks, cuts, fraying of lips, and abrasion. Worn or damaged seal rings should be replaced.

Exploded View - WGL BOP (Screwed)

Cap

Packing Element

Piston

Slotted Inner Sleeve

Body

23


Hydraulic Control SystemThe surface hookup of the WGK connects the hydraulic control lines to the opening and closing chambers of the BOP.

Pressure applied to the closing chamber raises the piston and effects the initial seal between the packing unit and drill pipe. Well pressure or test pressure also acts on the piston below the sealed off packing unit and further increases the closing force acting on the packing unit. As the well pressure or test pressure exceeds the required level the preventer is maintained closed by well pressure alone. As well pressure increases, the closing force on the packing unit also increases. Closing pressure should be proportionally reduced as well pressure is increased in order to maintain optimum closing force on the packing unit and prolong packing unit life.

During normal drilling operations, it is recommended that the pressure regulator valve for the WGK be set at the initial closing pressure for the size pipe being used. This pressure will ensure that initial seal off is achieved should a kick be encountered.

During BOP testing operations, once initial seal off is achieved, closing pressure should be proportionally reduced as well pressure is increased.

WOMs WGK Annular BOP

Opening Pressure

Closing Pressure

24


Exploded View - WGK BOP (Latched)

WGK Annular Type BOP (Latched)WOMs Type WGK BOP was designed especially for surface installations and is also used on offshore platforms.

The WGK is a universal annular blowout preventer with a long record of proven, quality performance.

Standard operation requires both opening and closing pressure.

Seal-off is effected by hydraulic pressure applied to the closing chamber which raises the piston, forcing the packing unit into a sealing engagement.

Any normal closing unit having a separate pressure regulator valve for the annular BOP and sufficient accumulator volume can be used to operate the WGK.

The WGK is designed to be well pressure assisted in maintaining packing unit seal off once initial seal off has been effected. As well pressure further increases, closure is maintained by well pressure alone.

Large Pressure Energized Seals are used for dynamically sealing piston chambers to provide safe operation, long seal life, and less maintenance.

Piston Sealing Surfaces Protected by Operating Fluid lowers friction and protects against galling and wear to increase seal life and reduce maintenance.

Operating Chambers are Tested to Full BOP Working Pressure to ensure strength, reliability, and the ability to over-pressurize the chambers in emergencies.

9

17

1

6

2

3

418

21

27

5

WGK 7-1/16 3000 - 13-5/8 5000(Latched)

33

2622

25

23

30

35

40

4134

8

7

29

10

25


WGK Annular Type BOP (Latched) P/NsItem Part

Name11

500013-5/85000

20-3/43000

21-1/42000

1 Head W1004063-04 W1002203-03 W1002583-1 W1002583


W3105057-01W3105057-02W3105057-03

W1002114-01W1002114-02W1002114-03

---

W1003273-01W1003273-02W1003273-03

3 Piston W1002145 W1002205 W1002565 W1002565

4 Cage W1004201 W1002207 W1006144-02 W1006144-02


W1004061-02W1004061-04

--

W1002581-1-

--

6 Head Gasket W31402 W38151 - W37379

7 Head Seal W51189 W30738 - W49283

8 U-Seal, Upper W31403 W37381 - W1004922

9 U-Seal Mid W30736 W38152 - W37378

10 U-Seal, Lower W32599 W38165 - -

11 Dbl U-Seal, Upper W31403 - - -

12 Nonextrusion Ring, Upper - - - -

13 Dbl U-Seal, Middle W30736 - - -

14 Nonextrusion Ring, Middle - - - -

15 Dbl U-Seal, Lower W32599 - - -

16 Nonextrusion Ring, Lwr - - - -

17 Pipe Plug, Piston Inicator W1900065-05 W9750221-25 - W975022125

18 Body Sleeve Capscrew W1920026120-12 W1920026100-10 - W19002612012

19 Head Lock Screw - - - -

20 Lock Collar - - - -

21 Jaw - W10022-25 - W1002584

22 Jaw Operating Screw W10040-67 W100235-01 - W100235002

23 Cap Screw, Jaw Holding - W100235-21 - W1002352-02

24 Seal, Jaw Hldg Cap Scrw - W19000011-24 - -

25 Nonextrusn Ring, Jaw Hldg Capscrw - - - W1003300

26 O-Ring, Jaw Oprtng Screw W19000013-29 W19000013-28 - W190001328

27 Relief Fitting W1900086-03 W1900086-03 - W1900085-03

29 Wear Plate W10042-03 - W1002030 -

30 Cap Screw, Wear Plate W1920026080-07 - - -

33 Pipe Plug W1900065-08 - - -

34 Head Clamp W1002351 W1002351 - W1002351

35 Head Clamp, Cap Screw W1900049140-24 W1900049140-24 - W190004114024

36 Body Sleeve Outer - - W1002569 W1002569

37 Body Sleeve Outer, Cap Screw - - - W19002616024

38 Body Sleeve Outer, Seal - - - W37380

39 O-Ring, Body Outer Sleeve - - - W37381

40 Nut - - - W983009300

41 Stud - - - W985056300

26


11 - 5M 13-5/8 - 5MHead Type Latched Latched


ClosingOpening

9.817.98

17.9814.16

Full Piston Stroke 7-1/8 8-1/2Body Diameter (B) 42.25 47.75

Clearance Diameter (C) 44.25 52.25Height (A)

Flanged Bottom 48.25 54.50


Hub Bottom

8,2007,7507,920

13,80013,100

Standard Ring Groove


Hub Bottom

RX54RX54RX54

BX160BX160BX160

WGK (Latched) Engineering Dimensional Data

WOMs WGL Annular BOPA

C

B

A - HeightB - Body DiameterC - Clearence Diameter

See Engineering andand Dimensional Data

27


WGK BOP Care and Maintenance (Latched)Inspect upper and lower connections for pitting, wear, and damage; especially in ring grooves and stud bolt holes. Worn or damaged ring grooves must be welded, machined, and stress relieved. Worn or damaged stud bolt holes can be drilled and tapped to the next larger size and fitted with step-studs.

Check the body for wear and damage-especially in the internal cylinder walls for pits and vertical scores. Minor pits and scores can be removed in the field with emery cloth. Repaired surface should be coated with silicon grease or castor oil. Severe pits and scores may require machining and/or welding which should be performed in a WOM approved machine shop.

Inspect the vertical bore for wear and damage from drill string and drill tools; especially in the area of the ring grooves. If wear is excessive, the area must be repaired.

Check the inner body sleeve for wear, damage, and looseness. Check slots in sleeve for cuttings which may restrict piston movement.

Check for piston damage and wear; especially the inner and outer walls for pits and vertical scores and the tapered bowl for pits and gouges. Minor pits and scores on the walls can be removed in the field with emery cloth.

Check the wear plate in the inner bottom face of the head for wear. In addition to the aging process of time and use, wear of this metal surface is produced by the combination of vertical and lateral forces.

Inspect the packing unit for wear, cracking, hardness, and correct elastomer composition.

Check seal ring for nicks, cuts, fraying of lips, and abrasion. Worn or damaged seal rings should be replaced.

Cap

Packing Element

Piston

Slotted Inner Sleeve

Body

28

Worldwide Oilfield Machine, Inc. MSP 21-1/4 2000(Latched)

9

17

1

2

3

21

418

36

30

6

8

7

29

5

28

Exploded View - MSP BOP (Latched)

MSP Annular Type BOP (Latched)The MSP BOP was developed as a compact, light-weight unit for medium pressure drilling service, remedial work and well servicing. It can be used on surface and subsea installations. Standard operation requires both opening and closing pressure. Seal off is affected by hydraulic pressure applied to the closing chamber which raises the piston, forcing the packing unit into a sealing engagement. Any normal closing unit having a seperate regulator valve for the annular BOP and sufficient accumulator volume can be used to operate the MSP.

29


MSP (Latched) Part NumbersItem Part

Name29-1/2

5001 Head W1004063-04


W3105057-01W3105057-02W3105057-03

3 Piston W1002145

4 Cage W1004201


W1004061-02W1004061-04

6 Head Gasket W31402

7 Head Seal W51189

8 U-Seal, Upper W31403

9 U-Seal Mid W30736

10 U-Seal, Lower W32599

11 Dbl U-Seal, Upper W31403

12 Nonextrusion Ring, Upper -

13 Dbl U-Seal, Middle W30736

14 Nonextrusion Ring, Middle -

15 Dbl U-Seal, Lower W32599

16 Nonextrusion Ring, Lwr -

17 Pipe Plug, Piston Inicator W1900065-05

18 Body Sleeve Capscrew W1920026120-12

19 Head Lock Screw -

20 Lock Collar -

21 Jaw -

24 Seal, Jaw Hldg Cap Scrw -

27 Relief Fitting W1900086-03

28 Body Sleeve Inner, Cap Screw

29 Wear Plate W10042-03

30 Cap Screw, Wear Plate W1920026080-07

34 Head Clamp W1002351

35 Head Clamp, Cap Screw W1900049140-24

36 Body Sleeve Outer -

37 Body Sleeve Outer, Cap Screw -

38 Body Sleeve Outer, Seal -

39 O-Ring, Body Outer Sleeve -

40 Nut -

41 Stud -

30


WOM BOP FacilityWOM is licensed under API 6A-0394 and API 16A-0079 and has a fully implemented API Q1 quality system. The API 16A-0079 license not only applies to drill-thru equipment, but also Ram and Annular Type BOPs. WOM is certified to ISO 9001. WOM manufactures components that are fully interchangeable with Cameron, Shaffer, and Hydril type BOPs. These parts are engineered to meet the most stringent strength and durability requirements.

2011 Worldwide Oilfield Machine, Inc. www.womusa.comRev APR2011

Headquarters/U.S.A.Worldwide Oilfield Machine, Inc.11809 Canemont StreetHouston, Texas 77035 USAPhone: +1 (713) 729-9200Fax: +1 (713) 729-7321

Worldwide Oilfield Machine, Inc.5800 CunninghamHouston, Texas 77041 USAPhone: +1 (713) 937-0795Fax: +1 (713) 937-8574

Worldwide Oilfield Machine Pvt. Ltd.Gat No. 778, at Post VeluPune Satara Rd.Tal. Bhor, Dist. Pune. 412 205. IndiaPhone: +91 (2113) 252 357/499/422Fax: +91 (2113) 252 476

Magna Casting & Machine WorksGat No. 777, at Post VeluPune Satara Rd.Tal. Bhor, Dist. Pune. 412 205. IndiaPhone: +91 (2113) 252 357/499/422Fax: +91 (2113) 252 476

Magnum Forge & Machine WorksGat No. 777, at Post VeluPune Satara Rd.Tal. Bhor, Dist. Pune. 412 205. IndiaPhone: +91 (2113) 252 357/499/422Fax: +91 (2113) 252 476

Worldwide Oilfield Machine (UK) Ltd.7 St Machar RoadAberdeen AB24 2UUScotland, UKPhone: +44 (01224) 484400Fax: +44 (01224) 489740

WOM M.E.JAFZA View LOB#19, Office# 2402Jebel Ali DowntownDubai (U.A.E)Phone: (971-4) 88 55 111Fax: (971-4) 88 55 112

WOM Southeast Asia Pte. Ltd.61A Tuas South Ave 1 Singapore 637326Phone: +65 6560 3857Fax: +65 6560 3859

Magnum Subsea Systems61A Tuas South Ave 1 Singapore 637326Phone: +65 6863 3533Fax: +65 6558 7562

Contact US

LICENSED UNDER

6A-020316A-00806D-033016C-008817D-0023

CERT-0020744

No. CE-0041-PED-H-WOM-001-08-USA

www.womusa.com

BOP Catalog

Documents

Transcript of BOP Catalog