2010 NAVIEN Energy Solutions Center Products room controller is disconnected, outdoor temperature...
Transcript of 2010 NAVIEN Energy Solutions Center Products room controller is disconnected, outdoor temperature...
2010 NAVIENEnergy Solutions Center
ProductsProducts
About US
The Leading Manufacturer in Koreato be a World leading manufacturer
About US
to be a World leading manufacturer
Supplies HVAC equipmentto more than 30 countries worldwide since 1978
Ab USAbout US
Beijing KyungDong Boiler Co., Ltd
N i A i I
HQ: KD Navien Co., LtdSanghai Navien International Trade
Co., Ltd
Navien America., Inc
2010 AHR EXPO2010 AHR EXPO
AHR ExpoJan 2010 Orlando,
FL.
KD NavienTankless Gas Water Heaters
Wall Hung Gas BoilersEnergy Management Systems
Home Network Systems
KD Navien
Wall Hung Gas Boilers
Combination Oil Boilers
Air Conditioners
Ventilation Systems
Home Network Systems
Zone Valve Manifold Control Systems
Home Security Systems
Since 1979
Gas & Oil BurnersConstruction Materials
Since 1979
STS Heat Exchangers
Plate Heat Exchangers
Circulation Pumps
Fans & Motors
Environmental Materials
Industrial Materials
Ceramic Materials Tankless Gas Water Heaters
Wall Hung Boiler
C t Vi iCorporate Vision
Announcing KD Navien's environment and energysystems were set the goal to be a leading enterprisesystems were set the goal to be a leading enterpriseby 2014 in the global market.
KD Navien is the “Global Leader” in HighEfficiency and Eco-Friendly TechnologyEfficiency and Eco-Friendly Technology.
N i A i Mi iTo become the business leader in the high
Navien America MissionTo become the business leader in the highefficiency appliance industry in North AmericaTo provide North Americans with the highesttechnical products, most environmentally friendlyProducts on the marketTo provide the best customer service and bestTo provide the best customer service and besttechnical support of products in the marketTo be the #1 integrated Hydronic MechanicalTo be the #1 integrated Hydronic Mechanicalproducts manufacturer in North America within 5years
NAVIEN Condensing Efficiency Benefits.NAVIEN Condensing Efficiency Benefits.g yg y
PrimaryH
SecondaryH
Dual Heat Exchangers= 98% Combustion Efficiency
Heat Exchanger
Heat Exchanger
98% Efficiency = Energy Saving98% Efficiency = Energy Saving
= 98 % Efficiency Low Emission = The Most Eco-friendlyfriendly
NAVIEN Condensing Features & NAVIEN Condensing Features & B fitB fitBenefits.Benefits.
Plastic vents (PVC Canada: Type BH Class IIAPlastic vents (PVC, Canada: Type BH Class IIA S636 PVC, ULC)No Vent Kits requiredExtended Vent Lengths up to 100’
Durability = Extended LifeCondensate Resistance = Less Service Calls
APS (Air Pressure sensor) & GPS (Gas PressureAPS (Air Pressure sensor) & GPS (Gas Pressuresensor) = GARC (Gas, Air Ratio control) = IdealCombustion, Flame Stability and steadyperformance
N i T kl W HNavien Tankless Water Heater
NR and NP SpecificationsNR and NP SpecificationsItem NR-180(A) NR-210(A) NR,NP-240(A)
Heat Capacity (Input)
Natural GasMin: 15,000 Btu/h
Max: 150,000 Btu/h
Min: 17,000 Btu/h
Max: 180,000 Btu/h
Min: 17,000 Btu/h
Max: 199,000 Btu/h
Min: 15 000 Btu/h Min: 17 000 Btu/h Min: 17 000 Btu/hLP Gas
Min: 15,000 Btu/h
Max: 150,000 Btu/h
Min: 17,000 Btu/h
Max: 180,000 Btu/h
Min: 17,000 Btu/h
Max: 199,000 Btu/h
Heat Capacity (Input) 77°F Rise 3.8 Gal/m 4.5 Gal/m 5.0 Gal/m
Dimensions W17” x H28”x D14” W17” x H28”x D15”W17” x H28” x
D15”
Weight NCR-A 77 lbs 86 lbs 86 lbs
Installation Type Indoor / Outdoor Wall-Hung
Specifications
Energy Factor 0.95 ~0.98 0.96 ~0.98 (TESTING @ BR LAB)
Burner3 Stage 3 Stage
BurnerPremixed Burner Premixed Burner
Material3” PVC Sch 403” ABS Sch 40
Navien’s Stainless Steel Vent Kit
3” PVC Sch 403” ABS Sch 40
Navien’s Stainless Steel Vent Kit
Venting Model Allowable Max length / Max # of Elbows
180 70’ 6 100’ 6
210 100’ 6 100’ 6210
240 100’ 6 100 6
Connection
Cold Water ¾” NPT ¾” NPT
Hot Water ¾” NPT ¾” NPTSize
Gas ¾” NPT ¾” NPT
Minimum
AModel
0.0 GPM 0.0 GPMMinimumFlow rate
Model
Non AModel
0.5 GPM (burner on/off : 0.48/0.40 gpm)
0.5 GPM(burner on/off : 0.48/0.40 gpm)
2nd Generation (NR/NP-(A)) Lay-out
2nd A Model 2nd Non-A Model
※ Above Lay outs are Regular (Residential) Model
2 A Model 2 Non-A Model
※ Above Lay-outs are Regular (Residential) Model
1st Generation (CR) Vs 2nd Generation (NR) A Model Water Flow Diagram
Gas ManifoldS l / (N 1 2)Combustion Fan
Exhaust Duct
Exhaust AdapterCombustion Air Intake Adapter
Igniter RodFlame Rod
Over Heat Preventer
Exhaust Gas
Condensing HeatExchanger
Primary HeatExchangerBuffer-Tank
Condensing
PrimaryHeat Exchanger
Sol v/v (No. 1,2)Combustion Fan
Pre-Mixed BurnerThermistor 1
Hot Water
Heat Preventer
Hot Water Over
Mixi V lv
Bypass
Water AdjustmentV l
Check Valve
Water FlowSensor
CondensingHeat Exchanger
Cold Water Thermistor
Mixing Valve
Thermistor
Mixing Water
ValveCirculationPump
3-Way Valve
Gas Control Valve
Adjustment Valve
Gas Control Valve
Water Flow Sensor
Thermistor 2
Hot Water
Water
Gas inletHot Water Outlet
Hot Water Inlet
Cold Water Inlet
Fuel SupplyHot WaterOutlet
RecirculationInlet
Gas inletHot Water Outlet
Cold Water Inlet
Fuel SupplyGas inlet
d 2nd Generation (NR-A)2nd Generation (NR)
N i C bi i B ilNavien Combination Boiler
Model CH SpecificationsModel CH Specifications
ITEM/Model CH-180 CH-210 CH-240
Heat Capacity (Input) 17,000~150,000 Btu 20,000~175,000 Btu 20,000~199,000 Btu
Fuel (Gas) NG NG NGFuel (Gas) NG NG NG
Type Space Heating & Potable Water Heating
Dimension W17” x H28” x D12” W17” x H28” x D12” W17” x H28” x D12”
Weight 81 lb 90 lb 90 lbWeight 81 lb 90 lb 90 lb
MinimumFlow Rate
burner on/off : 0.48/0.40 GPM
Heating S l /R t
1.0”
ConnectionSizes
Supply/Return1.0
Cold Water InletHot Water Outlet
¾”
Gas Inlet ¾”Gas Inlet ¾
Model CH ComponentsModel CH ComponentsAPS
Premixed BurnerPremixed Burner
Primary Heat ExchangerFan
Secondary Heat Exchanger
GPSWater Pressure
Gas Valve
AutomaticWater Filling Valve
Hot WaterHeat Exchanger
Sensor
Flow Sensor
Water Filling Valve
3-Way Valve
Pump & Air vent
Supply Return DomesticHot Water
ColdWater
Model CH DHW ModeModel CH DHW ModeHot water pass way.
Plate HEXTPlate HEXT
Output: 160 000 BTU/HrOutput: 160,000 BTU/Hr
Model CH Heating ModeModel CH Heating Mode
Outdoor reset function (KOutdoor reset function (K--Factor function)Factor function)Outdoor temperature control function is automatically perceived setup temperature which is valuable to outdoor temperature, if temperature sensor is located outside. Users can set by room controller for temperature slope (K-Factor 0.5 ~ 6.0),
(( ))
Users can set by room controller for temperature slope (K Factor 0.5 6.0), recirculation and supply water’s setup temperature is not variable. Only work when room controller is connected.If room controller is disconnected, outdoor temperature sensor does not work.
<Return temperature K-Factor><supply temperature K-Factor> <Return temperature K Factor>supply temperature K Factor
Cascade CH + NR/NPCascade, CH + NR/NP
Why Hydronic Space HeatingWhy Hydronic Space Heating
In Radiant Space HeatingIn Radiant Space Heating
Comfort
Noise ReductionNoise Reduction
Efficiency
Zoning
Fle ibilitFlexibility
Reduces Allergens
Interior Decorating Freedom
Add V l t HAdds Value to Home
Radiant Heating heats objects such as concrete floor or wood, not Air.
Why Hydronic Space HeatingWhy Hydronic Space Heating
In Forced Air Space HeatingIn Forced Air Space Heating
Installation is significantl less e pensi e than other spaceInstallation is significantly less expensive than other space heating system
Easily add cooling system
Optimum Humidity Control
Cleaner Air (Air Filtering system)
Even Temperature Throughout (variable speed)
Navien Zone Control SystemNavien Zone Control SystemNavien Zone Control System
AHA (Auto Heat Allocation) Zoning Control SystemWhat is AHA (Auto Heat Allocation)?What is AHA (Auto Heat Allocation)?
AHA (A t H t All ti )AHA (Auto Heat Allocation) Zoning Control Systemg y
What is AHA (Auto Heat Allocation)?
AHA zoning control system automatically adjusts required heat that is idealAHA zoning control system automatically adjusts required heat that is ideal for each zone depending on the weather change outside, the location of the each zone, and R-Value of the house.Features & BenefitsAHA (Auto Heat Allocation) control; automatically adjusts the temperature of each zoneReturn water temperature control; prevents overshooting and undershooting maintaining set temperature all the timeundershooting, maintaining set temperature all the timeDurability & Reliability; enhances durability by reducing the number of motor starts and stopsQuiet Operation; built-in noise prevention system gives you peace of mindComfortable Heating; eco friendly distributors improves comfort living
Stirling Engine CHPStirling Engine CHP
Stirling Engine CHP (Combined heat and power) produces heat and electrical power simultaneously using a natural gas as an energy source for individual homes and small commercial propertiescommercial properties.This micro-CHP can be used as electricity supply back-up system or/and for light electricity demand facilities. The heat and power produced by the appliance is used directly in the home for space heating and for lighting and running domestic appliances.heating and for lighting and running domestic appliances.
Features & Benefits
Reduced energy bills by up to 25% per year•Significant reduction of CO2 emissions•High efficiency rating of up to 96% •Electrical output of 1kW•Heat output range from 15kW(51,000BTU/hr) to 36kW(122,000BTU/hr)Heat output range from 15kW(51,000BTU/hr) to 36kW(122,000BTU/hr)•All models are wall-hung type, designed as a direct replacement of an existing boiler•With an optional grid independent module, the engine will keep on running
d id h t d l t i l i th t f tand provide heat and electrical power in the event of a power outage
Smart Living & Smart Benefits
How Stirling Engine works?Free-position Stirling Engine technology has only two moving parts making it simple, compact, p g g gy y g p g p , p ,inexpensive and highly reliable system.Stirling Engine works by a temperature differential between supply (heated by the engine burner) and return (cooled by water) temperatures. This temperature differential causes the gas inside the engine to expand and contract, moving the pistons up and down. The electricity is generated when power piston in the Stirling Engine moves through the alternator. The hot gases are passed through the heat exchanger to produce heat and hot water.
•The displacer moves Helium within the generation from the heated end to the cooled end. This spring keeps the displacer moving up and downthe displacer moving up and down.•As the Helium is alternatively heated and cooled, it expands and contracts, creating a pressure wave inside the generator.•The pressure wave moves the power piston. The power piston includes magnets which move past a stationery coil producing alternating electrical current.•This cycle repeats 50 times per secondThis cycle repeats 50 times per second.
Solar PVT-CombiSolar PVT Combi
Navien Combination Solar PVT has been developed new technology forNavien Combination Solar PVT has been developed new technology for combining generating electricity and water heating.
Current conventional PV Solar panel efficiency and generating electricity p y g g ywill down due to heat that from nature abient temperature. These temperature changes to drop voltage with steady electric current.
Poto Cell Vinyl AcetateGlass Poto Cell Vinyl Acetate
Tedlar Foil
Glass
PolyurethaneFrame
Tedlar Foil
Exchanger
Reliable Efficient and The BestReliable, Efficient and The Best•Reduces significant amount of CO2 emissions and saves energy 30% or more electricity is produced when compared to conventional30% or more electricity is produced when compared to conventional crystal cell modules
•Provides domestic hot water and space heating when used withProvides domestic hot water and space heating when used with either a combi boiler or a tankless water heater as a back-up system
•Supplies on-demand domestic hot water and electricitypp y
•Delivers steady hot water temperature
•No maintenance system
Application 1Application 1
Application 2Application 2
Cooling with Heat Pump
Solar Water System: increasing the photovoltaic performance without i th l th l h t C li d i d tusing the solar thermal heat. Cooling down via ground water.
Combinationmodules
Cold water source
Heater
Inverter
Advantages:
Application:
higher efficient cooling effect of the combination modules PV-Therm due to a water source with constantly cold temperature
Manually operated defrosting in the wintertime provides a major photovoltaic performance
ppUnpressurized System