2 AUCTIONS LIVE WEBCAST & ONLINEwatson psf 560 560 mm drain wire payoff, s/n 23262c-w davis electric...
Transcript of 2 AUCTIONS LIVE WEBCAST & ONLINEwatson psf 560 560 mm drain wire payoff, s/n 23262c-w davis electric...
2 AUCTIONS LIVE WEBCAST & ONLINE
DAVIS STANDARD 20IN20DSPA301 2" 24:1 EXTRUDER
FEATURING: SAMP ROD BREAK DOWN MILL + DOWN COILER & TIN PLATING LINE, (17) EXTRUDERS, REWIND/COILING LINES, REELEX & SPOOLERS, PAYOFFS & TAKE-UPS, MACHINE TOOLS, WIRE & CABLE AND FACTORY SUPPORT EQUIPMENT, FORKLIFTS
Online Bidding Available Through
WINDINGS D1500 REELEX COILING MACHINE
SAMP MT40 12+1 DIE ROD BREAK DOWN MILL
1AUCTION
Sale Date: Tuesday, December 6, 2016 at 9:00 AM MT
Location: 1 Greenwood Road, Sidney, Nebraska 69162
Inspection: Monday, December 5 from 8:30 AM to 4:30 PM MT, or By Appointment
Surplus to the Ongoing Operations of
LIVE WEBCAST AUCTION
2AUCTION
Surplus to the Ongoing Operations of
Sale Closes From: Thursday, December 8, 2016
at 10:00 AM MT
Location: 1 Greenwood Road, Sidney, Nebraska 69162Inspection: Monday, December 5 through Wednesday,
December 8 from 8:30 AM to 4:30 PM MT Each Day, or By Appointment
ONLINE AUCTION
2 AVAILABLE
2000Webcast Bidding Available Through
Perfection Industrial Salesph 847-545-6374 • fax 847-427-8884www.perfectionindustrial.com
P.O. Box 8456ph 401-943-3777www.commissionbrokers.com
Sale is Being Held in Conjunction With:
Phone: 203-488-7020www.TheBranfordGroup.com
2
>AMERICAN
KUHNE AK250 A/C 2.5" 24:1
EXTRUDER
To discuss your requirements for an auction, please call Perfection Industrial
847-545-6374
ROD BREAK DOWN MILL, EXTRUDERS
1AUCTION
Sale Date: Tuesday, December 6, 2016 at 9:00 AM MT
Location: 1 Greenwood Road, Sidney, Nebraska 69162
Inspection: Monday, December 5 from 8:30 AM to 4:30 PM MT, or By Appointment
Surplus to the Ongoing Operations of
LIVE WEBCAST AUCTION
<AMERICAN KUHNE AK250 A/C 2.5" 24:1 EXTRUDER
>ERWIN NEUMANN
TIN ELECTROPLATING
LINE
SAMP AS/3840 DOWN COILER AMERICAN KUHNE 2.5" EXTRUDER + 2" VERTICAL
ROD BREAK DOWN MILL2000 SAMP MT40 12+1 DIE ROD BREAK DOWN MILL, s/n 1N003910, w/Tungsten Carbide Draw Cones, 350 HP Motor, (2) Danc-ers, Payoff Tower, Cosema Paper Filtration Unit, Pulpito Operator Console, NOTE: Motor Rebuilt and Main Drive Replaced in 2014
2000 SAMP AS/3840 DOWN COILER, s/n 1D003904
2000 ERWIN NEUMANN TIN ELECTROPLATING LINE, w/(2) Munk D480G8/4000 4,000 Amp Rectifiers, Sodium Hydroxide Bath Tank, Rinse Tank #1, Pickling Sulfuric Acid Bath Tank, (2) Sulfonic Acid Bath Tanks #1 and #2, Rinse Tank #2
(17) EXTRUDERS7 2000 AMERICAN KUHNE AK250 A/C 2.5" 24:1 EXTRUDERS, s/n 2049, 2043, 2041, 2039, 2037, 2035, NA, w/Temperature Control Cabinets, Crossheads, 50 HP Motors
2 NOKIA NMB80MM24D 80 MM 24:1 EXTRUDER, s/n 97104005-05, NA, w/Tem-perature Control Panel w/Siemens Simatic OP27 Control
DAVIS STANDARD 20IN20DSPA301 2" 24:1 EXTRUDER, s/n J-1942, w/Temper-ature Control Cabinet, Reliance 20 HP DC Motor
2 2000 MAPRE E1.45.30.SN.CPC 45 MM 30:1 HITEMP EXTRUDERS, s/n 001-0057, 003-0057, w/Temperature Control Panel w/Eurotherm 11 Zone 2208e Control
NOKIA 45 MM 30:1 HITEMP EXTRUDER, s/n NA, w/Temperature Control Panel
DAVIS STANDARD THERMATIC II 1.5" 24:1 HITEMP EXTRUDER, s/n F7625, w/US Motor 10 HP Motor
MAPRE E1.25.25.SN.AV 25 MM 25:1 VERTICAL EXTRUDER, s/n 004-0057
AMERICAN KUHNE 2" VERTICAL EXTRUDER, s/n NA
NOKIA 45 MM HITEMP FOAM EXTRUDER, s/n NA
7 AVAILABLE
2000
2000
7 AVAILABLE
3
EXTRUDERS, REELEX, SPOOLERS & REWIND/COILING LINES
View our current auction schedule at www.perfectionindustrial.com
WINDINGS D1500 REELEX COILING MACHINE
CLIPPER SP24 PARALLEL ARBOR DUAL SPOOLER CLIPPER SP24 PARALLEL ARBOR DUAL SPOOLER
AMERICAN KUHNE AK250 A/C 2.5" 24:1 EXTRUDERS
DAVIS STANDARD 1.5" HITEMP EXTRUDER
2000 MAPRE 45 MM EXTRUDER + 2" VERTICAL
CLIPPER SP16/RESPOOL LINE SETIC ICL 630N 630 MM REWINDERS
BEAUMONT 22" RESPOOL LINE
REELEX, SPOOLERS & REWIND/COILING LINES2 WINDINGS D1500 REELEX DUAL SPINDLE COILING MACHINES, s/n 01844, 01802, w/ACC300 Dancer, Buffer Dancer, Control
5 CLIPPER SP24 PARALLEL ARBOR DUAL SPOOLERS, s/n V5197-60444, V5190-60447, S5195-054593, I3235-70183, NA, w/PLC Control, Dancers and Accumulators
RESPOOL LINE: c/w Watson Dual 30" Payoff, Clipper SP16 Parallel Arbor Dual Spooler, s/n 3707-C7031, Dancer, Clinton STB-10G Spark Tester
COILING LINE: c/w Watson PPS-TWA 2 Position Payoff, Accumulator, 2005 Ya Sih C124C Automatic CNC Coiling Machine, s/n YSO50831AK-ADC-2/NO50807, w/Pro-Face Digital Control, Clinton TST-10GB Spark Tester, (2) Uline U-959 Semi-Auto Poly Strapping Machines
TEC 630 MM REWIND LINE: c/w TEC 28PPO1-400-1 28" Payoff, 28" Take-Up
CUSTOM REWIND LINE: c/w 30" A-Frame Payoff, TSI Laser Speed Length/Speed Gauge, Clinton STB-10-D Spark Tester, Federal EA30 30" Respooler
CEECO 72" TAPE/REWIND LINE: c/w Ceeco 72" Drag Payoff, Watson PS-4 2 Position Payoff, Beta Counter, Ceeco Binder Head, Ceeco 72" Shaftless Take-Up
30" REWIND LINE: c/w Davis Electric 30" A-Frame Payoff, Tach Stand, Clinton STB Spark Tester, MGS Counter, Beta Accuscan 3 Diameter Gauge, Take-Up
3 SETIC ICL 630N 630 MM REWINDERS, s/n 5803/34, 5801/32, NA, w/Clinton STB-10G Spark Tester
WEBER & SCHER 500 MM REWINDER
STERLING/DAVIS ELECTRIC CRS 30 RESPOOLER
Webcast Bidding Available Through
FURTHER INFORMATIONFor further information,
please contact Jennifer Reiner
847-545-6374 or via email at
2000
2 AVAILABLE
5 AVAILABLE 5 AVAILABLE
HI-TEMP
2005 YA SIH C124C CNC COILING MACHINE/COILING LINE
RIGHT VIEW LEFT VIEW
3 AVAILABLE
4
PAYOFFS & TAKE-UPS, MISCELLANEOUS WIRE & CABLE MACHINERY
VITEK TU72HP 72" SHAFTLESS TAKEUP
WATSON/AFA 84" GANTRY TAKEUP
2000 VITEK MBDC12 MULTIPASS MIST CAPSTANS
KINREI CB900L 900MM CABLERWATSON KINREI NB760R 760MM CABLER
1999 VITEK MBDC12 MULTIPASS MIST CAPSTANS
WATSON VC33 36" BELT WRAP CAPSTAN
WATSON KINREI 2POSITION MOTORIZED PAYOFFS
PAYOFFS & TAKE-UPSWATSON/AFA TAKEUP LINE: W/WATSON/AFA HDTU22.3684 84" GANTRY TAKEUP, s/n 23862K-A, w/Siemens Drives, Catenary Arm Dancer, Operators Control, (2) Watson DSTPO-630-L 2-Position Tape Payoffs, w/Dancers, Watson VC-33 36" Belt Wrap Capstan, s/n 23862I-A, Watson DB-205 Dual Binder Head, s/n 23862C-A
VITEK TU72HP 72" SHAFTLESS TAKEUP, s/n 9816-127, w/Eurotherm 620 Vector Drive
2 DAVIS STANDARD 3618 36" SHAFTLESS PAYOFFS, s/n G-3950, NA
WATSON GDPO2.1236 36" MOTORIZED SHAFTLESS PAYOFF, s/n 21132A-A
WATSON PSF560 560 MM DRAIN WIRE PAYOFF, s/n 23262C-W
DAVIS ELECTRIC 30" AFRAME PAYOFF
10 WATSON KINREI 2POSITION MOTORIZED PAYOFFS
MISCELLANEOUS WIRE & CABLE MACHINERY1999 KINREI CB900L 900MM CABLER, s/n 006
WATSON KINREI NB760R 760MM CABLER, s/n NA
9 VITEK MBDC12 MULTIPASS MIST CAPSTANS, s/n 0014-48, 0014-045, 0014-044,9914-037, 9714-026, 0014-043, 0014-042, NA, New As 2000
2 HIPOTRONICS ATS10DC100 HIPOT MACHINES, w/100 Pin Board
HIPOTRONICS ATS10DC50 HIPOT MACHINE, w/50 Pin Board
HIPOTRONICS DW15877 HIPOT MACHINE, w/50 Pin Board
HIPOTRONICS DW767 HIPOT MACHINE, w/50 Pin Board
DCM CMS2XLD 25 PAIR CATEGORY CABLE TESTER, w/LCL
ZUMBACH, BETA, CLINTON QUALITY CONTROL EQUIPMENT
WATSON 36" MOTORIZED SHAFTLESS PAYOFF
ALSO: HAGEN AND FUNKE KTA AIR WIPES, MEDEK AND SCHOERNER RS707 BAND MARKERS, CONAIR AND UNADYN DRYERS/HOPPERS, 2 CONAIR PD25 25 HP POSITIVE DISPLACEMENT VACUUM CONVEYING SYSTEM W/DC2 DUST COLLECTORS, 9 CONAIR PD10 10 HP VACUUM CONVEYING SYSTEMS, W/DC2 DUST COLLECTORS, SS WATER TROUGHS, YORK/TRANE RTAAT554XTO1A3DOBGJS CHILLER, s/n UOO-KO4739, W/RECIRCULATION STATION, AEC NQA30 30TON PORTABLE CHILLER, AEC STAC20CB 20TON PORTABLE CHILLER, AEC STAC20CB 20TON PORTABLE CHILLER, AEC SRAC15CB 15TON PORTABLE CHILLER, AEC NXGA15 15TON PORTABLE CHILLER, AEC STAC10CH 10TON PORTABLE CHILLER, 3 AEC NXGA10 10TON PORTABLE CHILLERS, AEC STAC5CH 5TON PORTABLE CHILLER, FILTERTECH TEB400IHB EVAPORATOR, s/n 253728AO1, COMPLETE DRAW DIE AND EXTRUDER TIP REPAIR/MAINTENANCE SHOP
25 AVAILABLE
1999
9 AVAILABLE 9 AVAILABLE
5
MISCELLANEOUS WIRE & CABLE MACHINERY, FACTORY SUPPORT EQUIPMENT
To discuss your requirements for an auction, please call
Perfection Industrial 847-545-6374
View our current auction schedule at www.perfectionindustrial.com
>ZEKS 1000
NCFW400 AIR
DRYER
QUINCY QGV200 AIR COMPRESSOR
CONAIR/TRANE CHILLER
RECIRCULATION STATION
VIEW OF AEC PORTABLE CHILLERS
FILTERTECH TEB400IHB EVAPORATOR
VIEW OF STEMS
VIEW OF REELS
CONAIR NO 1801/102 HOT AIR DRYER W/3,000 LB HOPPER
CONAIR PD25 VACUUM LOADER W/DC2 DUST COLLECTOR
CONAIR PD10 VACUUM LOADERS /W DC2 DUST COLLECTORS
CONAIR HB3000 DRYER W/TWIN 3,000 LB HOPPERS
VIEW OF CONAIR DRYER/HOPPER INTEGRATED SYSTEM
CONAIR D1040 SENTRAL LOADER CONTROL
FACTORY SUPPORT EQUIPMENT6 CATERPILLAR E5000 5,000 LB ELECTRIC FORKLIFTS, s/n A4EC241382, A4EC241381, A4EC241380, A4EC241379, NA, w/Side Shifter, 3 Stage Mast, Battery Charger
CATERPILLAR E5000AC 5,000 LB ELECTRIC FORKLIFT, s/n A4EC240780, w/Side Shifter, 3 Stage Mast, Battery Charger
CATERPILLAR NR300036V 3,000 LB X 240" ELECTRIC REACH TRUCK, s/n 2NR3750712, w/Battery Charger
CATERPILLAR NR300036V 3,000 LB X 198" ELECTRIC REACH TRUCK, s/n 2NR3750704, w/Battery Charger
MITSUBISHI ERS15N36V 3,000 LB X 198" ELECTRIC REACH TRUCK, s/n 2SR3205903, w/Battery Charger
2008 QUINC Y QGV200 200 HP ROTARY SCREW AIR COMPRESSOR, s/n BU809190030
2008 ZEKS 1000 NCFW400 AIR DRYER, s/n 309460
SUMMIT CONDEPHASE 80 OIL/WATER SEPARATOR, s/n 053168004P
9 AVAILABLE2 AVAILABLE
9 AVAILABLE
100-TON
2008
20083 AVAILABLE
VIEW OF CAT 5,000 LB ELECTRIC FORKLIFTS
6 AVAILABLEVIEW OF ELECTRIC REACH TRUCKS
3 AVAILABLE
8 AVAILABLE
Webcast Bidding Available Through
FURTHER INFORMATIONFor further information, please contact Jennifer Reiner 847-545-6374 or via email at [email protected]
6
LIVE WEBCAST AUCTION
To discuss your requirements for an auction, please call Perfection Industrial 847-545-6374
2AUCTION
Surplus to the Ongoing Operations of Sale Closes From: Thursday, December 8, 2016 at 10:00 AM MT
Inspection: Monday, December 5 through Wednesday, December 8
from 8:30 AM to 4:30 PM MT Each Day, or By Appointment
ONLINE AUCTION
VIEW OF ADJUSTABLE
PALLET RACKING
MSC XU6323 VERTICAL MILL SCOTCHMAN FI510914M HYDRAULIC IRONWORKER
OVER 600 LOTSSUMMIT 20X80B GAP BED ENGINE LATHE, s/n 30738, w/2-Axis DRO
SUMMIT 16X80R GAP BED ENGINE LATHE, s/n 31460, w/2-Axis DRO
JET GH1460ZX GAP BED ENGINE LATHE, s/n 67326, w/2-Axis DRO
MSC 12" X 36" TOOLROOM LATHE, s/n 8715, w/ 2-Axis DRO
MSC XU6323 3 HP VERTICAL MILL, s/n 400491, w/Power Feed Table, 2-Axis DRO
BRIDGEPORT VARIABLE SPEED VERTICAL MILL, w/Power Feed Table, 2-Axis DRO
SCOTCHMAN FI510914M 51TON HYDRAULIC IRONWORKER, s/n 1343M800
POWERMATIC 20" VERTICAL BANDSAW
RIDGID 525 POWER THREADER
GREENLEE 555 POWER BENDER + ATTACHMENTS
GREENLEE 6006 SUPER TUGGER CABLE PULLER
GENIE Z20/8N ELECTRIC SNORKEL LIFT
TEREX TS20 800 LB X 20’ ELECTRIC SCISSOR LIFT, s/n 99320559
2 VESTIL TMS20 2,000 LB ELECTRIC TILTERS TRUCKS
2 PRESTO C74A600 ELECTRIC REEL TRUCKS
2 MULTITON S2263 WALKYTYPE ELECTRIC FORKLIFTS
BIG JOE MSA 2200 ELECTRIC WALKYTYPE FORKLIFT
VIEW OF STORES1000'S OF BEARINGS
PLUS: LARGE QUANTITY OF SPARE PARTS AND CONSUMABLES INCLUDING BEARINGS, MOTORS, HARDWARE, CABLE, DRIVES, MCC’S, ETC.
1AUCTION
Sale Date: Tuesday, December 6, 2016 at 9:00 AM MT
Location: 1 Greenwood Road, Sidney, Nebraska 69162
Inspection: Monday, December 5 from 8:30 AM to 4:30 PM MT, or By Appointment
Surplus to the Ongoing Operations of
51-TON3 HP
7
VIEW OF FLAMMABLE LIQUID STORAGE CABINETSALSO: OTC 25TON HYDRAULIC SHOP PRESS, MIG AND TIG WELDERS, PLASMA CUTTER, MAG BASE DRILLS, DRILL PRESSES, DOUBLEEND GRINDERS, LISTA CABINETS, FLAMMABLE FLUID STORAGE CABINETS, CANTILEVER RACKING, 200 SECTIONS OF ADJUSTABLE PALLET RACKING, FLOOR SCALES, SCISSOR TABLES, HOTSEY NO. 558 PRESSURE WASHER, ORION H6610DT DUAL TURNTABLE STRETCH WRAPPER, HAND AND POWER TOOLS, TOOL CHESTS, RETRACTABLE HOSE REELS, VISES, WORK BENCHES, LADDERS, SHOP FANS, ROLLING STAIRS, RIGGING EQUIPMENT, FLOOR SCALES, ETC.
OVER 600 LOTS
View our current auction schedule at www.perfectionindustrial.com
2AUCTION
Surplus to the Ongoing Operations of Sale Closes From: Thursday, December 8, 2016 at 10:00 AM MT
Location: 1 Greenwood Road, Sidney, Nebraska 69162 Inspection: Monday, December 5 through Wednesday, December 8
from 8:30 AM to 4:30 PM MT Each Day, or By Appointment
ONLINE AUCTION
VIEW OF MATERIAL HANDLING
SUMMIT 20X80B GAP BED ENGINE LATHE
SUMMIT 16X80R GAP BED ENGINE LATHE
VIEW OF SCISSOR TABLES
JET GH1460ZX GAP BED ENGINE LATHE VIEW OF GREENLEE EQUIPMENT VIEW OF GRANULATORS
VIEW OF LISTA CABINETS
2-AXIS DRO
2-AXIS DRO
2-AXIS DRO
Perfection Industrial Sales – 2550 Arthur Ave., Elk Grove Village, IL 60007
Phone: +1 (847) 545-6374 – Fax: +1 (847) 427-8884
www.perfectionindustrial.com
QS-0034710
2 AUCTIONS LIVE WEBCAST & ONLINE
Sale Date: Tuesday, December 6, 2016 at 9:00 AM MT
Location: 1 Greenwood Rd., Sidney, NE 69162
Inspection: Monday, December 5 from 8:30 AM to
4:30 PM MT, or By Appointment1AUCTION
LIVE WEBCAST AUCTION – Surplus to the Ongoing Operations of
Sale Closes From: Thursday, December 8, 2016 at 10:00 AM MT
Location: 1 Greenwood Rd., Sidney, NE 69162Inspection: Monday, December 5 through
Wednesday, December 8 from 8:30 AM to 4:30 PM MT Each Day, or By Appointment
2AUCTION
ONLINE AUCTION – Surplus to the Ongoing Operations of
SALE SITESALESALESALESALESALSASALSAL SITSITS EE1 Greenwood Rd. Sidney, NE 69162
Denver Int’l. Airport
2 AUCTIONS LIVE WEBCAST & ONLINE
AUCTION 1 – LIVE WEBCAST
SALE DATE: Tuesday, December 6, 2016 at 9:00 AM MT
INSPECTION: Monday, December 5 from 8:30 AM to 4:30 PM MT, or By Appointment
REMOVAL: All small items must be removed by Friday, December 9, 2016. All major items must be removed by Wednesday, December 21, 2016. Removal hours are Monday through Friday from 8:00 AM to 4:00 PM. Extended hours and weekends may be accommodated by prior appointment. No assets may be removed during the live auction.
TERMS OF SALE: A 15% buyer’s premium will be charged on all assets purchased by buyers attending the sale in person, and any Webcast or Online Buyers will be charged an 18% buyer’s premium. Acceptable forms of payment are cash (but only on sale day), cashier’s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of the sale close. For any Buyers failing to pay within the 48 hour stated payment period, the buyer’s premium will be increased to 18% (bidders attending the Auction in person) or 21% (Webcast or Online Bidders). Everything will be sold to the highest bidder, in accordance with the Auctioneer’s customary “Terms of Sale”, copies of which will be posted on the premises of the sale and subject to additional terms announced the day of sale. All items are sold “As is, Where is” without any warranties expressed or implied. Although obtained from sources deemed reliable, the Auctioneer makes no warranty or guarantee to the accuracy of the information contained in this brochure and online. All buyers should inspect the goods beforehand to satisfy themselves. PAYMENT: ALL PURCHASES MUST BE PAID WITHIN 48 HOURS OF THE CLOSE OF SALE. If you intend to pay by wire transfer, we will accept payment the day after the sale ONLY IF a deposit of 25% of the total purchases is made on the day of the sale. Contact our office for wire instructions. Only cash, wire transfer or certified check, payable to Perfection Industrial Sales will be accepted. Company checks payable to Perfection Industrial Sales will be accepted only if accompanied by a bank letter of guarantee. All sales are subject to sales tax. Purchasers claiming exemptions from taxes must provide proof satisfactory to the Auctioneer of their entitlement to claim such exemptions. Auction Conducted in U.S. Funds.
AUCTION 2 – ONLINE SALE
SALE CLOSES FROM: Thursday, December 8, 2016 at 10:00 AM MT
INSPECTION: Monday, December 5 through Wednesday, December 8 from 8:30 AM to 4:30 PM MT Each Day, or By Appointment.
REMOVALAll items must be removed by Friday, December 16, 2016. Removal hours are Monday through Friday from 8:00 AM to 4:00 PM. Extended hours and weekends may be accommodated by prior appointment.
TERMS OF SALEAn 18% buyer’s premium will be charged on all assets. The buyer’s premium will be reduced to 15% for payments made by means of cash, cashier’s check, company check (with bank letter of guarantee) or wire transfer within 48 hours of sale close. Credit card payments are limited to a maximum of $2,000. All items are sold “As is, Where is” without any warranties expressed or implied. Auction Conducted in U.S. Funds.
View our current auction schedule at www.perfectionindustrial.com
To discuss your requirements for an auction, please call Perfection
Industrial 847-545-6374
HOTELSHampton Inn Sidney............................... (308) 254-2111 635 Cabela Drive, Sidney, Nebraska 69162
Fairfield Inn & Suites Sidney ................. (308) 254-9000 889 E Jennifer Lane, Sidney, Nebraska 69162
Comfort Inn & Suites Sidney ................. (308) 254-4423 825 Hoffies Drive, Sidney, Nebraska 69162
Webcast Bidding Available Through
LOCATION: 1 Greenwood Road, Sidney, Nebraska 69162
AIRPORT: Denver International Airport
DIRECTIONSFrom Denver International Airport: (Route has toll roads) Follow airport terminal road signs to Peña Blvd. Continue on Peña Blvd., keeping right. Take Exit 6B toward Boulder/Ft. Collins. Continue on E-470 N for approx. 6 miles, then exit right at Exit 35 for I-76 E toward Fort Morgan. Continue on I-76 E for approx. 105 miles. Take Exit 125 for US-6 toward Sterling/Holyoke. Turn left onto I-76 Business/US-6 W (signs for Sterling). In 2 miles, turn right onto N 3rd St. N 3rd St. turns slightly right and becomes US-138 E/Broadway.
Remain on this road for 8 miles, then turn left onto CO-113 N. Continue onto NE-19 N. Continue straight onto Rd. 19A/Old Post Rd. Turn left onto 11th Ave. Turn right onto Fort Sidney Rd. Turn right onto US-30 E/Illinois St. (Signs for I-80). Turn left at the first cross street onto Greenwood Rd. Parking lot for the auction site will be on the right hand side just past the railroad tracks.
FOR FURTHER INFORMATIONFor further information, contact Jennifer Reiner at (847) 545-6374 or [email protected].
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17
PresortedFirst Class Mail
U.S. PostagePAID
Eugene, OregonPermit No. 17