19496404 Windows XP Installation

7/29/2019 19496404 Windows XP Installation

1/68

Mad Dogs. All Rights Reserved.

Step by step guide to install Microsoft Windows XP

Professional.


2/68


1. For installation purpose a Windows XP Professional bootable CD is needed. Insertthe CD in CD-ROM and go to your BIOS setupby pressing Delete or F2 depending onyour system.


3/68


2. Now go to Boot sequence and select Boot Device Priority.


4/68


3. Select boot sequence,CD-ROM

Hard Disk

Any Other Device


5/68


4. Press F10 to save changes.


6/68


5. Now computer will restart. On reboot a message will come Press any key to bootfrom CD.. at this point press any key so that computer boots from CD-ROM


7/68


6. Now computer will boot from CD-ROM and setup will start.


8/68


7. A few more windows come like:


9/68



10/68



11/68



12/68



13/68



14/68



15/68


8. Windows XP Licensing Agreement, you have to accept in by press F8 key. In caseyou dont agree press Esc key and your setup will end.


16/68


9. Now the process of partitioning will come. If you dont want to change partition thenpress Enter and go to step 14.

To create partitions select the Unpartitioned space and press C


17/68


10. Now you will define partition size in MB. By default size will be set equal tomaximum size of hard disk.


18/68


11. Enter the size of partition you want to create, again in MB & press Enter.


19/68


12. A partition has been created. Remaining part will of hard disk will be shown asUnpartitioned space. You can create partition of this space by selecting it with down arrowkey and pressing C


20/68


13. Again enter partition size in MB and press Enter. You can create No. of drives onyour requirement.


21/68


14. Now partition process is completed. Select drive C for windows installation byarrow keys and press Enter.

Hint: In case you dont want to create new partitions, in the picture below you will see a bitchange, in front of partition you will NTFS/FAT32 instead of

[New ]


22/68


15. A format is needed after creation of partitions. If u didnt create partitions you willhave an additional optional here to leave partition as it is. Format in both cases is

recommend, weather you create partition or not.


23/68


16. Select to file system you need by using arrow keys and press Enter.


24/68


17. Format process will start, it will take few moments.


25/68



26/68



27/68


18. Now setup will create list to files to be copied.


28/68


19. Now setup will copies to windows installation folders. This process will take comeminutes.


29/68



30/68



31/68


20. After this process the system will reboot.


32/68


21. After reboot you will again see the screen Press any key to boot from CD.Do not press any key. Keep this process going.


33/68



34/68


22. Now remaining steps of installation will start.


35/68



36/68



37/68


23. During installation you will need to enter some information. In Regional LanguageOptions you can customize your settings depending on your requirements.

Press Next


38/68


24. Enter your full name and the name of your company or organization. Press Next


39/68


25. Enter your product key given with your CD. Press Next.


40/68


26. Enter your computer name. You can also set an Administrator password at this stagebut it is optional, you can keep it blank. Press Next


41/68


27. Set your time, date and Time zone. Press Next.


42/68


28. Installation of network will start.


43/68



44/68


29. Select network setting. Press Next.


45/68


30. Select Workgroup or Computer Domain, depends of network in which your systemis. For standalone single computer type any workgroup name. Press Next


46/68


31. Setup will now register different components.


47/68



48/68


32. Setup will save settings.


49/68



50/68



51/68


33. Before completion setup will remove temporary folders.


52/68


34. After completion system will reboot again.


53/68


35. After reboot you will again see the screen Press any key to boot from CD.Do not press any key. Keep this process going.


54/68



55/68


36. Display settings will prompt. Press OK.


56/68


37. Monitor settings will prompt. Press OK.


57/68



58/68


38. Post installation setting will come. Select Next in welcome message.


59/68


39. Enable or disable your Automatic Updates. Press Next.


60/68


40. Setup will check your internet connectivity. You can skip this process by pressingSkip.


61/68


41. Its time to register your windows. You can skip this process by selection No. PressNext


62/68


42. Now create a user who will use this system. Type the name of each person who willuse this computer. Press Next.

Remember a default account has already been created with name Administrator.


63/68


43. A Thank you message to confirm setting is completed. Press Finish.


64/68


44. Welcome to windows.


65/68



66/68



67/68



68/68

19496404 Windows XP Installation

Documents

Transcript of 19496404 Windows XP Installation