1258. Bending machine for reinforcingbars and concrete equipment

Sale Information

Number of items : 18

Location : Aalter (Belgium)

Start date : 12 March 2019 as from 17:00

End date : 26 March 2019 as from 18:30

Viewing day : 19 March 2019 from 15:00 to 17:00

Durmelaan, 12

9880 Aalter (BE)

Removal day : 05 April 2019 from 09:00 to 16:00

Durmelaan, 12

9880 Aalter (BE)

BY APPOINTMENT ONLY

Durmelaan, 12

9880 Aalter (BE)

WWW.AUCTELIA.COM

The General Terms and Conditions and the Specific conditions of sale apply to this online Auction

SPECIFIC CONDITIONS - 1258. Bending machine for reinforcing bars and concrete equipment

START DATE 12 March 2019 as from 17:00

END DATE 26 March 2019 as from 18:30

VIEWING19 March 2019 from 15:00 to 17:00

Durmelaan, 12

9880 Aalter (BE)

REMOVAL05 April 2019 from 09:00 to 16:00

Durmelaan, 12

9880 Aalter (BE)

BY APPOINTMENT ONLY

Durmelaan, 12

9880 Aalter (BE)

In order to be able to pick up the Lots, the total amount due has to be paid. The Lots can only be removed if the Buyer shows

on the removal day the proforma invoice and signs the delivery note.

WARNING: The Buyer is fully responsible for the dismantling, loading and transportation of the bought Lots.

WARNING: If Buyers do not collect their goods at the removal date, time and address mentioned above, extra storage and

transport costs will be charged.

AUCTION FEES Auction Fees (based on Final Selling Price per Piece)- Amounts less than €15,000 17% of the final selling price

- Amounts more than €15,000 12% of the final selling price

VAT 21.00 % on the highest bid and/or accepted by the Seller and on the Auction fees

PAYMENTWithin 3 business days of reception by e-mail of the proforma invoice, the Buyer must transfer the total amount due to the

bank account below and mention the invoice number:

Auctelia

ING 363-4520918-79 / IBAN : BE58 3634 5209 1879 / BIC BBRUBEBB

BNPPF 035-7704702-33 / IBAN : BE79 0357 7047 0233 / BIC : GEBABEBB

ORGANIZERAUCTELIA

Rue Emile Francqui 6/3 B-1435 Mont-Saint-Guibert, Belgique, 6

1435 Mont-Saint-Guibert (BE)

SUPERVISION This online Auction sale is held under the supervision of court Bailiff Alain BORDET, 4031 Angleur-Lige and/or court Bailiff

Marcel MIGNON, 6870 Saint-Hubert.

EXTENSION OF

ONLINE AUCTION If there is at least one Bid within the last 5 minutes of a sale, the closing time is extended by 5 minutes until there is no more

Bid.

If no Bid has been placed on a Lot, then the closing time of the sale of this Lot is extended by 20 minutes.

ATTRIBUTION OF LOTS Within 48 hours of the closing of the Auction (Saturdays, Sundays and Belgian public holidays not included), the Candidate-

Buyer receives confirmation of purchase by e-mail on behalf of the Seller that the Sales contract has been materialised. If the

Candidate-Buyer has not received an e-mail of confirmation within this delay, this means that their Bid did not result in an

Attribution.

TERMS AND

CONDITIONSThe General Terms and Conditions and the Specific conditions apply to this online Auction, as you can find on the website

www.auctelia.com.

TO THE ATTENTION OF

THE CANDIDAT-

BUYER/BUYER

Lots are sold as they are, in the state they are in on the date of Attribution or of the Sales contract, with all the benefits and

burdens attached thereto. Auctelia SA and/or the Seller provide no guarantee relating to hidden or visible defects, nor does it

provide guarantees relating to the wholeness, quantities, the working and/or the usefulness. Defects of any nature

whatsoever, the disappointed expectations of the Buyer or third party buyers do not give right to compensations, damages

and/or settlement. Given that Lots can be viewed before the Sale or the Auction and that the Terms and Conditions are

known to the Buyer, the Buyer is deemed to have carefully examined the Lots, prior to purchase. The Buyer examines the

Lots at his own risk.

TRANSLATION In the case of a discrepancy between translations of these Specific conditions and the original French version of these

Specific conditions, the French version prevails.

Photos Description Start price

ID : 1258-001 Bending machine for concrete bars CNC Schnell bar wiser TA/22Make : Schnell

Model : bar wiser TA/22

Bending machine for concrete bars

Make: Schnell

Model: bar wiser TA/22

Year: 2003

Voltage: 400 V three-phase

Power: 600 kW

Weight: 9900 kg

Maximum diameter: 20 mm

The block folding dimensions: 15.5 m x 2.5 m x 4.4 m

Dimensions of mobile output table:

12 m x 2.50 m x 72 cm

Number of tracks: 3

Length of the rails of displacement: 675 cm

Included computer program

Table's make : Schnell

Model: BWE/8/14

Year: 2003

Number of slots in bars: 8

Voltage: 400 V three-phase

Power: 2.2 kW

Weight: 5100 kg

Dimensions of the table: 14 m x 4.10 m x 2.50 m

Number of rails for storage of entry table: 2

Length of track: 675 cm

State: Operational

9 000,00 €

ID : 1258-002 Concrete formwork + Clamping screw for formwork (lot 015) + 13 magnets for

lot 016

1. Concrete formwork

Quantity: 4

Dimensions of an element: 12 mx 1.25 m

Number of rails on the ground: 12

Length of a rail: 4.20 m

2. Clamping screws for formwork

Quantity: +/- 40 pieces

Contents of the complete box included

To be used in combination with lot 1258-002

3. 13 magnets of lot 016

750,00 €

Photos Description Start price

ID : 1258-003 Swivel and vibrating table for concrete Cometal VFP 1900/6 + 5 magnets lot 017Make : Cometal

Model : VFP 1900/6

Swivel and vibrating table for concrete

Brand: Cometal

Size of the table: 8,30 mx 3,60 mx 85 cm

Engine

Brand: WZ

Model: VFP 1900/6

Voltage: 380/400 V three-phase

Power: 1,25 kW

Number of engines: 4

State: good

With this lot:

5 magnets for table (part of lot 017 - 5 copies out of 18)

450,00 €

ID : 1258-004 Swivel and vibrating table for concrete Cometal VFP 1900/7 + 5 magnets lot 017

Swivel and vibrating table for concrete

Brand: Cometal

Size of the table: 8,30 mx 3,60 mx 85 cm

Engine

Brand: WZ

Model: VFP 1900/6

Voltage: 380/400 V three-phase

Power: 1,25 kW

Number of engines: 4

State: good

With this lot:

5 magnets for table (part of lot 017 - 5 copies out of 18)

450,00 €

Photos Description Start price

ID : 1258-005 Swivel and vibrating table for concrete Cometal VFP 1900/8 + 5 magnets lot 017

Swivel and vibrating table for concrete

Brand: Cometal

Size of the table: 8,30 mx 3,60 mx 85 cm

Engine

Brand: WZ

Model: VFP 1900/6

Voltage: 380/400 V three-phase

Power: 1,25 kW

Number of engines: 4

State: good

With this lot:

5 magnets for table (part of lot 017 - 5 copies out of 18)

450,00 €

ID : 1258-006 Swivel and vibrating table for concrete Cometal VFP 1900/9 + 3 magnets lot 017Make : Cometal

Swivel and vibrating table for concrete

Brand: Cometal

Size of the table: 8,30 mx 3,60 mx 85 cm

Engine

Brand: WZ

Model: VFP 1900/6

Voltage: 380/400 V three-phase

Power: 1,25 kW

Number of engines: 4

State: good

With this lot:

3 table magnets (part of lot 017 - 3 copies out of 18)

450,00 €

ID : 1258-007 235 Tennant Floor scrubberMake : Tennant

Model : 235.0

Floor scrubber

Make: Tennant

Model: 235

Year: 1987

Hours: 3823

Brush diameter: 45 cm

Dimensions: 190 cm x 130 cm x 130 cm

Condition: used

50,00 €

Photos Description Start price

ID : 1258-008 Jerry cans

Jerry cans

Use to contain spirit of salt

Capacity: 20 L

Quantity: 40 ex.

10,00 €

ID : 1258-009 Chainsaw Crimac SC 245-3 to be reconditioned, roller tableMake : Crimac

Model : SC 245-3

Chainsaw

Make: Crimac

Model: SC 245-3

Year: 2011

Voltage: 400 V three-phase

Power: 1.1 kW

Cutting width: 24 cm

Dimensions: 165 cm x 50 cm x 170 cm

State: to be reconditioned

Welded undismantable Roller tables included.

Quantity and dimensions:

1 x 800 cm x 53 cm x 75 cm

1 x 600 cm x 53 cm x 130 cm

40,00 €

ID : 1258-010 Galvanized profile racks

Galvanized profile racks

Dimensions: 250 cm x 120 cm x 210 cm

Quantity: 8 ex.

20,00 €

ID : 1258-011 Benchtop folding machine BFM A 4/5 SRMake : BFM

Model : A 4/5 SR

Benchtop folding machine 

Make: BFM

Model: A 4/5 SR

Year: 1977

Voltage: 380 V three-phase

Dimensions: 640 cm x 80 cm x 105 cm

Condition: Operational

250,00 €

Photos Description Start price

ID : 1258-012 Bin for quality control of concrete MacbenMake : Macben

Bin for quality control of concrete

Make: Macben

Dimensions: 100 cm x 120 cm x 125 cm

State: good

10,00 €

ID : 1258-013 Column drilling machine Ibarma A-35Make : Ibarma

Model : A-35

Column drilling machine

Make: Ibarma

Model: A - 35

Year: 2004

Voltage: 380 V three-phase

Power: 1,6 kW

Drilling height: 30 cm

Chuck:

Diameter: 2 cm

Condition: untested

40,00 €

ID : 1258-014 Concrete formwork + 12 magnets lot 016

1. Concrete formwork

Quantity: 6

Quantity and dimensions of the elements:

3 x 6 mx 1 m

3 x 8 mx 1 m

Number of rails: 9

Length of a rail: 2.80 m

2. 12 magnets of lot 016

750,00 €

ID : 1258-018 Beams - 4 copies of 600 * 15 * 14 cm

beams

Quantity: 4 copies

- Length: 6 meters

- Height: 15 cm

- Width: 14 cm

100,00 €

Photos Description Start price

ID : 1258-019 Beams - 4 copies of 600 * 15 * 19 cm

beams

Quantity: 4 copies

- Length: 6 meters

- Height: 15 cm

- Width: 19 cm

100,00 €

ID : 1258-020 Beams - 4 copies of 600 * 15 * 30 cm

beams

Quantity: 4 copies

- Length: 6 meters

- Height: 15 cm

- Width: 30 cm

200,00 €

ID : 1258-021 Beams - 4 copies of 600 * 15 * 40 cm

beams

Quantity: 4 copies

- Length: 6 meters

- Height: 15 cm

- Width: 40 cm

300,00 €

WHY SELL YOUR USED EQUIPMENT WITH AUCTELIA ?

QUALITY DEALS

Auctelia is deal-focused:95% of listed equipment have been sold. We only earn our fee if you make a sale.

BEST PRICE

Online auction is one of the best way to reach the market price.

You always win.

SHORT TIME

Online auction accelerates sales so you save time and stay focused

on your own business.

info@auctelia.com

+31-85-4002222

+32-10-620660

www.auctelia.com/sell

Contact us!

References

95%

45.000+

of listed equipmenthave been sold

buyers & sellers

40 targetedcountries

+33-9-75-18-00-09