1. Wing

Wings Part List Apply instant glue

Cut the covering for installing the aileron servos s horn

Cut the covering for passing through

servos extension

Apply epoxy glue Install the ailerons servos

Install the ailerons servos plate Install the ailerons horn

Completed the ailerons servos system

Apply epoxy glue Apply epoxy glue

apply epoxy glue Drill diameter 4.2mm hole for fixing the Wings

2. Main Landing Wheel/Front Landing Wheel

Main Landing Wheel Part List Cut away covering film

Install the Main Wheel Complete the Main Wheel Set

Apply instant glue Drill diameter 3mm holes

Install the Front Landing Wheels pedestal

Install the Front Landing Wheels set

Complete the Front Landing Wheels set

3. Stabilizer/Vertical

Cut away the cover film, but dont cut the wood

Cut away the cover film, but dont cut the wood

Apply instant glue Apply instant glue

Apply epoxy glue Apply epoxy glue

Stabilizer/Vertical/Front wheel Part List Bend the push-and-pull pole

Warm thermal contraction drivepipe Install rudders horn

Install rudders servo system Install elevators horn

Install elevators servo system Complete rudder and elevators servo system

Apply epoxy glue Install the front wheels servo system

Complete front wheels servo system

4. Motor/Cowing/Canopy

Motor/Cowing/Canopy Part List Install Canopy

Cut away this part Apply epoxy glue

Install motor

Install cowing Install the wings