1 Round 6 Technology CAD / CAM. 2 Passport Photo Frame Drawing Area Draw / Edit Toolbox Drawing Aids...
-
Upload
tobias-riley -
Category
Documents
-
view
217 -
download
0
Transcript of 1 Round 6 Technology CAD / CAM. 2 Passport Photo Frame Drawing Area Draw / Edit Toolbox Drawing Aids...
1
Round 6 Technology
CAD / CAM
2
Passport Photo Frame
Drawing Area
Draw / Edit Toolbox
Drawing Aids
Toolbox
Position, Size and Direction
Information
Material Size
3
Passport Photo Frame
1. Click Grid Lock
Set to 5 x 52. Click shapes
3. Click Corner
4. Drag to correct size
50 mm x 200 mm
5. Correct size shown here
4
1. Click Grid Lock Off
2. Double Click Attach
3.Click Mid point of
Line / arc settings
4. OK these settings
5. Click Lines
5
1. Make sure square pointer crosses line near centre and click
2. Repeat on opposite side
6
Passport Photo Frame
1. Click and hold down contour
2. Move to contour parallel then release
7
Passport Photo Frame
1. Change contour to 60mm
2. Click OK
8
1. Locate just above line and click
2. Line appears
3. Click and hold down contour
4. Move to closed contour then release
9
Passport Photo Frame
1. Change contour to 10 mm
2. Click OK
10
1. Locate just above line and click
2. Contour appears
11
1. Click and hold down Arcs
2. Select filleted arc
12
Passport Photo Frame
1. Set Radius to 5mm
2. Click OK
13
Passport Photo Frame
1. Click first line (turns pink)
2. Click adjoining line to create rounded corner
3. Repeat on other corners
14
Passport Photo Frame
Delete Centre line
15
Passport Photo Frame
1. Click Text
2. Click start point
3. Type character in Text Entry Box
Click setting
16
1. Choose a font
2. Change size to 40.00mm
3. Click OK
17
1. Click OK
18
1. Click Select
2. Click to Select Shape
3. Click yellow square in centre
4. Drag to fit inside frame then click to position
19
1. Click Fill
2. Select No fill
3. Click OK
20
1. Click Explode
2. One level only
3. Click Continue
Must be selected
21
1. Click Zoom in
2. Click and drag box around shape
22
1. Click and hold DEL ANY
2. Select Delete part
23
1. Locate and click to remove unwanted lines to leave just an outline
If you delete the wrong line click UNDO LAST to replace it
24
1. Click and hold down IN
2. Select media
25
Radius corners as before
26
1. Click Col 2. Click the red square in the Custom
colours
3. Click OK
27
1. Select Contour
2. Set Contour to 1.00mm
3. Click OK
28
1. Locate inside tool path first
2. Locate outside tool path last
29
1. Zoom in to view window
2. Select black line
30
1. Select Col
2. Click on Blue Box in Custom Colours
3. Click OK
31
Click media to view all