Isolation Valves, Ball Valves, Severe Service, Isolation Valves + ...
04 Two Three Way Ball Valves for Cng Applications
-
Upload
scribd-unlimited -
Category
Documents
-
view
227 -
download
4
description
Transcript of 04 Two Three Way Ball Valves for Cng Applications
-
Two/Three Way Ball Valves
For CNG Applications
www.sealexcel.com
-
TWO/THREE WAY BALL VALVES
SEEALEXCEL Series BV107 mul series Ball Valves perform ono services where quick and posive shut o required.
The compact and rugged design having spring loaded seat for high cycle life and ensure low operang torque.
Features :
Two/Three way Compact Design.
Trunnion Ball Design having bearing support to minimize
operang torque and seat wear
Blowout Proof Stem.
Panel Mounng.
Low Operang Torque.
Handle Indicates Direcon of Flow.
Posive Handle Stops.
Spring Loaded Peek Seat ensure perfect sealing.
Variety of End conguraon includes SEALEXCEL WellLok
Tube Fings, NPT/BSPT pipe connecons.
100% Factory tested.
Operang Parameters :
Pressure Rang : Upto 6000 psig (408 bar) at cwp.
Temperature Rang : 50C to 160C
Applicaons :
CNG Applicaon
Instrument Air lines.
High pressure Instrument lines
General Plant Service.
Material of Construcon :
Flow Data
Tesng
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
Valve
Orice 0.187 (4.8 mm)
1500
6000
1500
6000
2Way
Cv = 1.2
Pressure Drop
to Atmosphere
( p) PSI
Air SCFMO O
at 70 F (20 C)
Water GPMO O
at 70 F(20 C)
840
3300
530
2100
3Way
Cv = 0.75
46
93
29
58
Sr. No. Part Descripon Material
Handle / Insert
Handle Screw
Panel Nut
Stem ORing
Stem
Connector End Seal
Port End Connector
Seat Retainer
Seat Spring
Seat
Stem Backup
Stem Oring Backup
Stem Washer
Stem Bearing
Seat Retainer Oring
Seat Retainer Oring Backup
Seat Retainer Guide
Ball
Valve Body
Nylon / Brass
Stainless Steel
SS316
Viton
SS316
PTFE
SS316
SS316
SS301
PEEK
PTFE
PTFE
PEEK
PEEK
Viton
PTFE
SS316
SS316
SS316
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
Standard Test : Each valve is factory tested with nitrogen
at 1000 psig (69 bar) for leakage at the seat and packing,
the maximum allowable leak rate of 0.1 sccm
Optional Hydrostatic test : This test is performed with
deionised water at 1.5 time the working pressure.
-
1/8 Female NPT
1/4 Female NPT
1/4 WellLok
3/8 WellLok
1/2 WellLok
6mm WellLok
8mm WellLok
10mm WellLok
12mm WellLok
1/8 Female NPT
1/4 Female NPT
1/4 WellLok
3/8 WellLok
1/2 WellLok
6mm WellLok
8mm WellLok
10mm WellLok
12mm WellLok
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
0.187 (4.8)
1.2
1.0
1.6
1.4
1.0
1.6
1.5
1.3
1.0
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
0.75
2Way
3Way
Valve TypeEnd Connecon
Inlet Outlet
Orice
inch (mm)
CvDimensions (inches)
A B
2.94
3.94
4.14
4.38
4.60
4.14
4.14
4.40
4.60
2.94
3.94
4.14
4.38
4.60
4.14
4.14
4.40
4.60
1.47
1.97
2.07
2.19
2.30
2.07
2.07
2.20
2.30
1.47
1.97
2.07
2.19
2.30
2.07
2.07
2.20
2.30
Ordering Number
2BV107FF2NEK
2BV107FF4NEK
2BV107TT250EK
2BV107TT375EK
2BV107TT500EK
2BV107TT6MEK
2BV107TT8MEK
2BV107TT10MEK
2BV107TT12MEK
3BV107FF2NEK
3BV107FF4NEK
3BV107TT250EK
3BV107TT375EK
3BV107TT500EK
3BV107TT6MEK
3BV107TT8MEK
3BV107TT10MEK
3BV107TT12MEK
1.50
0.38 max. panel thickness
29/32 panel hole
drill
2.1
25
1
.06
B B
A
0.5
5
1.50
2.1
25
0.38 max. panel thickness
29/32 panel hole
drill
0.5
5
1.0
6
A
B B
1/8 Female NPT
1/4 Female NPT
1/4 WellLok
3/8 WellLok
1/2 WellLok
6mm WellLok
8mm WellLok
10mm WellLok
12mm WellLok
1/8 Female NPT
1/4 Female NPT
1/4 WellLok
3/8 WellLok
1/2 WellLok
6mm WellLok
8mm WellLok
10mm WellLok
12mm WellLok
Dimensions are for reference only and subject to change without noce
Viton is the registered trademark of Dupont
TWO WAY 2BV107 THREE WAY 3BV107
-
Catalog No. BV107814