0 - Intro_RAS51
-
Upload
lotfibouhalloufa -
Category
Documents
-
view
1 -
download
0
description
Transcript of 0 - Intro_RAS51
1 © Nokia Siemens Networks Presentation / Author / DateFor internal use
3G RANOP 1Module 0 - Introduction
2 © Nokia Siemens Networks Presentation / Author / DateFor internal use
RANOP 1 - Introduction
• RANOP 1 – Pre-Optimisation material Contains
• Module 1 – Cluster Preparation
• Module 2 – RF Optimisation and Neighbour Planning
• Module 3 – Signalling
• Module 4 – Drive Test Analysis
• Module 5 – Inter-System Handover (ISHO) Optimisation
• Module 6 – Parameter Optimisation
• Module 7 – HSDPA Optimisation
3 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 1 – Cluster Preparation
Objectives
After this module the delegate shall be able to:-
•Understand the importance of cluster preparation in:
• Cluster planning
• Cluster health checks based on RNW
measurements
• Neighbour list verification and parameter audit
4 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 2 – RF Optimisation and Neighbour Planning
Objectives
After this module the delegate shall be able to
perform:-
•RF Verification and Optimisation actions
•Understand how new Sites should be integrated to
the network
•Neighbour Plan Verification
5 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Objectives
After this module the delegate shall be able to:-
• Describe the signalling flows for AMR calls, PS calls, HSDPA calls, ISHO, SHO and SRNC relocation procedures
• Understand the key pieces of information contained in the messages
• Understand the protocols and transport mechanisms used for the various messages
Module 3 – Signalling Flows
6 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 4 – Drive Test Analysis
Objectives
After this module the delegate shall be able to:-
•Understand the different elements required for an effective drive test program
•Understand how all aspects of drive data can be used to obtain a view of network performance
•Differentiate between genuine (RF) and non-genuine (system) failures
•Understand the KPIs that can be obtained
7 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 5 – ISHO Optimisation
• To be added
8 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 6 – Parameter Optimisation
Objectives
After this module the delegate shall be able to:-
• List some of the parameters that can be tuned for
improved performance
• Match these parameters to Call Setup and Call
Retention improvement areas
• Understand how new RAS05 & RAS51 PS features
effect for the throughput, file download time & PS
Call setup success
HSDPA parameter optimisation is included to module 7- HSDPA optimisation
9 © Nokia Siemens Networks Presentation / Author / DateFor internal use
Module 7 – HSDPA Optimisation
Objectives
After this module the delegate shall be able to:-
• Understand HSDPA optimisation areas
• Understand main HSDPA KPIs and how to different
HSDPA parameter settings effect for the
performance