· Web view ... 11132-1

SECTION 11132

FRONT PROJECTION SCREENS

Display hidden notes to specifier. (Don't know how? Click Here)

Copyright 2015 - 2019 ARCAT, Inc. - All rights reserved

** NOTE TO SPECIFIER ** Draper Inc.; Wall and ceiling surface mounted and recess mounted front projection screens.This section is based on the products of Draper Inc., which is located at:411 S. Pearl P. O. Box 425Spiceland, IN 47385-0425Toll Free Tel: 800-238-7999Tel: 765-987-7999Fax: 866-637-5611Email: request info ([email protected])Web: http://www.draperinc.com [ Click Here ] for additional information.Draper manufactures the best and most complete line of projection screens in the world. We want to help you incorporate these screens into the most effective presentation systems. Planning a projection system involves several steps: choosing the screen size, viewing surface, screen model and control system if required. For additional information, go to www.draperinc.com .

PART 1 GENERAL

1.1 SECTION INCLUDES

** NOTE TO SPECIFIER ** Delete items below not required for project.

A. Electrically operated, surface mounted, front projection screens.

B. Electrically operated, ceiling recessed, front projection screens.

C. Front projection screen controls.

1.2 RELATED SECTIONS

** NOTE TO SPECIFIER ** Delete any sections below not relevant to this project; add others as required.

A. Division 5 - Metal Fabrications: Suspension systems for projection screens.

B. Section 06402 - Interior Architectural Woodwork: Wood trim for recessed screen installation.

C. Section 09120 - Ceiling Suspension System: Supports and trim for suspended ceilings.

D. Section 09210 - Gypsum Plaster: Ceiling for recessed screen installation.

E. Section 09260 - Gypsum Board Assemblies: Ceiling for recessed screen installation.

F. Section 09510 - Acoustical Tile Ceilings: Ceiling for recessed screen installation.

G. Division 16 for electrical wiring, connections, and installation of remote control switches for electrically operated projection screens.

1.3 REFERENCES

** NOTE TO SPECIFIER ** Delete references from the list below that are not actually required by the text of the edited section.

A. NFPA 70 - National Electrical Code.

B. NFPA 701-99 - Fire Tests for Flame-Resistant Textiles and Films.

C. GREENGUARD Environmental Institute Gold.

D. US Green Building Council.

1.4 SUBMITTALS

A. Submit under provisions of Section 01300.

B. Product Data: Manufacturer's data sheets on each product to be used, including:

1. Preparation instructions and recommendations.

2. Storage and handling requirements and recommendations.

3. Installation methods.

C. Wiring diagram for electrically operated units.

** NOTE TO SPECIFIER ** Retain below for front projection screens where shop drawings are needed to understand relationships with adjoining work.

D. Shop Drawings: Shop drawings showing layout and types of projection screens. Show the following:

** NOTE TO SPECIFIER ** Edit below to suit screens specified and project conditions.

1. Location of screen centerline.

2. Location of wiring connections.

3. Seams in viewing surfaces.

4. Detailed drawings for concealed mounting.

5. Connections to suspension systems.

6. Anchorage details.

7. Accessories.

** NOTE TO SPECIFIER ** Delete selection samples if colors have already been selected.

E. Selection Samples: For each finish product specified, two complete sets of color chips representing manufacturer's full range of available colors and patterns.

F. Verification Samples: For each finish product specified, two samples, minimum size 6 inches (150 mm) square, representing actual product, color, and patterns.

1.5 QUALITY ASSURANCE

A. Single Source Responsibility: Obtain each type of projection screen required from a single manufacturer as a complete unit, including necessary mounting hardware and accessories.

B. Coordination of Work: Coordinate layout and installation of projection screens with other construction supported by, or penetrating through, ceilings, including light fixtures, HVAC equipment, fire-suppression system, and partitions.

1.6 DELIVERY, STORAGE, AND HANDLING

A. Do not deliver projection screens until building is enclosed and other construction where screens will be installed is substantially complete.

B. Store products in manufacturer's unopened packaging until ready for installation.

C. Protect screens from damage during delivery, handling, storage, and installation.

1.7 COORDINATION

A. Coordinate work with installation of ceilings, walls, electric service power characteristics, and location.

PART 2 PRODUCTS

2.1 MANUFACTURERS

A. Acceptable Manufacturer: Draper Inc., which is located at: 411 S. Pearl P. O. Box 425; Spiceland, IN 47385-0425; Toll Free Tel: 800-238-7999; Tel: 765-987-7999; Fax: 866-637-5611; Email: request info ([email protected]); Web: http://www.draperinc.com

** NOTE TO SPECIFIER ** Delete one of the following two paragraphs; coordinate with requirements of Division 1 section on product options and substitutions.

B. Substitutions: Not permitted.

C. Requests for substitutions will be considered in accordance with provisions of Section 01600.

** NOTE TO SPECIFIER ** Delete from the following lists the types of front projection screens not used on the project.

2.2 MOTORIZED, SURFACE MOUNTED, FRONT PROJECTION SCREENS

A. Premier: Electric motor operated, pentagonal-shaped steel case, tab tensioned. Metal roller mounted on rubber isolation mounts. Case is 5-7/8 inches x 5-1/4 inches (150 mm high x 134 mm deep), one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Case and tensioning dowel finished in flat black.

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and the related control option as required. Delete the paragraphs not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

3. System Options:

** NOTE TO SPECIFIER ** Select the required case finish and delete one of the following two paragraphs.

a. Case finished black (standard).

b. Case finished white.

** NOTE TO SPECIFIER ** Delete one of the following bracket paragraphs as required.

c. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. Finished black.

d. Floating Mounting Brackets for mounting screen to wall or ceiling.

** NOTE TO SPECIFIER ** Delete following paragraph if recessed ceiling installation is not required.

e. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.

4. Projection Viewing Surface: Mildew resistant 100 percent vinyl with black masking borders and 12 inch (305 mm) black drop.

** NOTE TO SPECIFIER ** Select the screen type from the following paragraphs and delete those not required. Note that there are size limitations with some viewing surfaces. Contact manufacturer for additional information.

a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone. GREENGUARD Gold certified. Available with or without black backing. 4K ready.

b. Pure White XT1300V - On Axis gain of 1.3. 180 degree viewing cone. For use in situations where lighting is well controlled and where enhanced brightness is needed due to limited projector brightness. Available with or without black backing. 4K ready.

** NOTE TO SPECIFIER ** Grey XH600V maximum size available is 9 feet by 12 feet (274 cm x 366 cm).

c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Available with or without black backing. 4K ready.

** NOTE TO SPECIFIER ** ClearSound NanoPerf XT1000V is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

d. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. 4K ready.

** NOTE TO SPECIFIER ** ClearSound Perf XT900V is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 20 feet (610 cm) from screen.

e. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended.

f. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 8K ready. Dark backing.

g. TecVision XH800X UST ALR - For short-throw and ultra-short throw applications. On Axis gain of 0.8. Rejects 57% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction.. Imaging Science Foundation certified. 8K ready. Dark backing.

h. TecVision XH900X ALR - On Axis gain of 0.9. Rejects 60% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

i. TecVision CS1000X ALR - On Axis gain of 1.0. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

j. TecVision MS1000X ALR - Rejects 73% of ambient light. On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

k. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready reference screen surface for blending applications, precise resolution, and color accuracy. Dark backing.

l. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone. Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 8K ready. Dark backing.

m. TecVision CS1200X ALR - On Axis gain of 1.2. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

n. TecVision XH900X Grey - On Axis gain of 0.9. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

o. TecVision MS1000X Grey - On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

p. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

q. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

r. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.

s. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. 4K ready.

t. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.

5. Tab-Tensioning System:

a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Viewing surface inserted into aluminum bottom dowel. Warranted for 5 years against tab separation.

** NOTE TO SPECIFIER ** Select the screen format and size required for the project. Delete the paragraphs not required.

6. Viewing Area H x W. Black masking borders standard. 12 inch (305 mm) black drop standard.

a. Custom Size: ________ H x ____________ W.

b. NTSC Format (4:3).

1) 6 foot (1.83 m) diagonal, 42-1/2 inches x 56-1/2 inches (1080 mm x 1435 mm).

2) 7 foot (2.13 m) diagonal, 50 inches x 66-1/2 inches (1270 mm x 1689 mm).

3) 100 inch (2540 mm) diagonal, 60 inches x 80 inches (1524 mm x 2032 mm).

4) 10 foot (3.05 m) diagonal, 72 inches x 96 inches (1829 mm x 2438 mm).




c. HDTV Format (16:9).

1) 65 inch (1651 mm) diagonal, 31-3/4 inches x 56-1/2 inches (806 mm x 1435 mm).


3) 82 inch (2083 mm) diagonal, 40-1/2 inches x 42 inches (1029 mm x 1067 mm).


5) 100 inch (2540 mm) diagonal, 49 inches x 87 inches (1245 mm x 2210 mm)






d. 16:10 Format.


2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches





7) 123 inch (3124 mm) diagonal, 65 inches x 104 inches (1351mm x 2642 mm).

8) 137 inch (3480) diagonal, 72-1/2 inches x 116 inches (1842 mm x 2946 mm).


** NOTE TO SPECIFIER ** If an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 14 feet (4.27 m). Select viewing surface color or black. Black is standard. If extra screen drop is not required, delete both paragraphs.

7. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with top border matching the viewing surface.

8. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with a black masking top border.

B. Premier XL: Electric motor operated, metal case, tab tensioned. Metal roller mounted on rubber isolation mounts. Case consists of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. Case 6-3/4 inches high x 6-3/4 inches deep (172 mm high x 172 mm deep). Case and tensioning dowel finished in flat black.


2. System Options:

** NOTE TO SPECIFIER ** Select the required case finish and delete one of the following two paragraphs.

a. Case finished black (standard).

b. Case finished white.

3. Projection Viewing Surface: Mildew resistant 100 percent vinyl with black masking borders and 12 inch (305 mm) black drop.




** NOTE TO SPECIFIER ** Grey XH600V maximum size available is 9 feet by 12 feet (274 cm x 366 cm).

c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Available with or without black backing. 4K ready.

** NOTE TO SPECIFIER ** ClearSound NanoPerf XT1000V is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

d. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. 4K ready.

** NOTE TO SPECIFIER ** ClearSound Perf XT900V is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 20 feet (610 cm) from screen.

e. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended.


g. TecVision XH800X UST ALR - For short-throw and ultra-short throw applications. On Axis gain of 0.8. Rejects 57% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.







n. TecVision XH900X Grey - On Axis gain of 0.9. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

o. TecVision MS1000X Grey - On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

p. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

q. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

r. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.

s. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. 4K ready.

t. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.




5. Viewing Area H x W. Black masking borders standard. 12 inch (305 mm) black drop standard.

a. Custom Size: ________ H x ____________ W.

b. NTSC Format (4:3).


2) 210 inch (5.33 m) diagonal, 126 inches x 168 inches (3200 mm x 4267 mm).




c. HDTV Format (16:9).


2) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4267 mm).


d. 16:10 Format.




** NOTE TO SPECIFIER ** If an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project fill in the drop height and select one of the following paragraphs and delete the other. Total screen height cannot exceed 14 feet (4.27 m). Select viewing surface color or black. Black is standard. If extra screen drop is not required, delete both paragraphs.



C. Targa: Electric motor operated, steel case. Cases are one piece 22 gauge steel with end caps forming universal wall or ceiling hanging bracket. Case size 5-7/8 inches high. x 5-1/4 inches deep (150 mm high x 134 mm deep). White scratch resistant textured finish.

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and associated control option as required. Delete the paragraphs not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db. UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

3. System Options:

** NOTE TO SPECIFIER ** Select the required case finish and delete two of the following paragraphs.

a. Case finished white (standard).

b. Case finished black.

** NOTE TO SPECIFIER ** Delete one of the following bracket paragraphs as required.

c. Projected Mounting Brackets with a 6 inch (152 mm) clearance from wall. Finished white or black.

d. Floating Mounting Brackets for mounting screen to wall or ceiling

** NOTE TO SPECIFIER ** Delete following paragraph if recessed ceiling installation is not required.

e. Ceiling Trim Kit for recessing above acoustical tile ceiling grid.

4. Projection Viewing Surface:


a. Matt White XT1000E - On Axis gain of 1.0. 180 degree viewing cone. Washable surface. GREENGUARD Gold certified. 4K ready.

** NOTE TO SPECIFIER ** Argent White XH1500E maximum size available is 8 feet by 10 feet (244 cm x 305 cm).

b. Argent White XH1500E - On Axis gain of 1.5. High reflectivity fabric with broad viewing cone. Excellent resolution and color balance. Flame and Mildew resistant. 4K ready.

** NOTE TO SPECIFIER ** Pearl White CH1900E maximum size available is 96 inches by 96 inches (244 cm x 244 cm).

c. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating. 4K ready.

d. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone. GREENGUARD Gold certified. 4K ready.

** NOTE TO SPECIFIER ** Contrast White XH1100E maximum size available is 8 feet by 10 feet (244 cm x 305 cm)

e. Contrast White XH1100E - On Axis gain of 1.1. Diffuse white coating over a grey base material. Recommended for use with low to moderate light output digital projectors, where some provision for light control exists. 4K ready.

** NOTE TO SPECIFIER ** ClearSound White Weave XT900E is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

f. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical properties are comparable to the highest quality speaker grille cloth. Some control of ambient light is recommended. Flame and mildew resistant. 4K ready.

** NOTE TO SPECIFIER ** ClearSound Grey Weave XH600E is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

g. ClearSound Grey Weave XH600E - On Axis gain of 0.6. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Grey material for higher contrast. Acoustical properties are comparable to the highest quality speaker grille cloth. Flame and mildew resistant. 4K ready.

h. Chroma Key Green - Green flexible PVC surface for video production where you need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.


5. Viewing Area H x W.

a. Custom Size: ________ H x ____________ W.

b. NTSC Format (4:3). Black masking borders standard.









c. HDTV Format (16:9). Black masking borders standard.

1) 65 inch (1651 mm) diagonal, 31-3/4 inch x 56-1/2 inch (781 mm x 1435 mm).

2) 73 inch (1854 mm) diagonal, 36 inches x 64 inches (

3) 82 inch (2083 mm) diagonal, 40-1/2 inches x 72 inches (









d. 16:10 Format. Black masking borders standard.


2) 76 inch (1930 mm) diagonal, 40 inches x 64 inches









** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select one of the following paragraphs. Total screen height cannot exceed 18 feet (5.49 m). Select viewing surface color or black. If not required, delete both paragraphs.



D. Targa XL: Electric motor operated, metal case. Cases consist of a curved front and L-shaped back/top cover fabricated of extruded aluminum, with endcaps forming ceiling hanging bracket. Case size 6-3/4 inches high x 6-3/4 inches deep (172 mm high x 172 mm deep). White scratch resistant textured finish.


2. System Options:

** NOTE TO SPECIFIER ** Select the required case finish and delete one of the following paragraphs.

a. Case finished textured white (standard).





** NOTE TO SPECIFIER ** Pearl White CH1900E maximum size available is 96 inches by 96 inches (244 cm x 244 cm).

b. Pearl White CH1900E - On Axis gain of 1.9. Matt white surface with reflective pearlescent coating. 4K ready.

c. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone. GREENGUARD Gold certified. 4K ready.

** NOTE TO SPECIFIER ** Contrast White XH1100E maximum size available is 8 feet by 10 feet (244 cm x 305 cm)

d. Contrast White XH1100E - On Axis gain of 1.1. Diffuse white coating over a grey base material. Recommended for use with low to moderate light output digital projectors, where some provision for light control exists. 4K ready.

** NOTE TO SPECIFIER ** ClearSound White Weave XT900E is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

e. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical properties are comparable to the highest quality speaker grille cloth. Some control of ambient light is recommended. Flame and mildew resistant. 4K ready.

** NOTE TO SPECIFIER ** ClearSound Grey Weave XH600E is not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen.

f. ClearSound Grey Weave XH600E - On Axis gain of 0.6. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Grey material for higher contrast. Acoustical properties are comparable to the highest quality speaker grille cloth. Flame and mildew resistant. 4K ready.

g. Chroma Key Green - Green flexible PVC surface for video production where you need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.



a. NTSC Format (4:3). Black masking borders standard.



b. HDTV Format (16:9). Black masking borders standard.

1) 193 inch (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4268 mm).


c. 16:10 Format. Black masking borders standard.



** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select one of the following paragraphs. Total screen height cannot exceed 18 feet (5.49 m). Select viewing surface color or black. Matching the viewing surface is standard for AV format, black is standard for all other formats. If not required, delete both paragraphs.



2.3 MOTORIZED, CEILING RECESSED, FRONT PROJECTION SCREENS

A. Access XL E: Electric motor operated, steel case. Case size 10-7/16 inches (265 mm) high and 9 inches (229 mm) deep. Steel housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and can be released to hang down or be removed for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels and trim for gypsum board ceiling. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Provided with internal junction box and plug-in wiring connections.

** NOTE TO SPECIFIER ** Available with IR and/or RF remote control.

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.


a. Matt White XT1000E - On Axis gain of 1.0. 180 degree viewing cone. Washable surface. GREENGUARD Gold certified.




1) 250 inches (635 cm) diagonal, 148 inches x 198 inches (376 x 503 cm).




1) 248 inches (630 cm) diagonal, 121-1/2 inches x 216 inches (309 x 549 cm).




2) 278 inches (706 cm) diagonal, 147-1/2 inches x 236 inches (375 x 599 cm).

** NOTE TO SPECIFIER ** Edit the following if an extra screen drop is required for the project. Black drop is standard for all formats. Fill in the drop height from one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). If extra screen drop is not required, delete both paragraphs.



B. Access XL V: Electric motor operated, steel housing, tab tensioned. Case size 10-7/16 inches (265 mm) high and 9 inches (229 mm) deep. Steel housing with white paint finish and stamped steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and can be released to hang down or be removed for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels or for trim for gypsum board ceilings. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Provided with internal junction box and plug-in wiring connections to allow housing.

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake.


** NOTE TO SPECIFIER ** Select the screen type from the following paragraphs and delete those not required. Note that there are size limitations with some viewing surfaces. Contact manufacturer for additional information

a. Matt White XT1000 - On Axis gain of 1.0. 180 degree viewing cone. GREENGUARD Gold certified. Available with or without black backing. 4K ready.


c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Maximum size 9 feet x 12 feet (275 cm x 366 cm). Available with or without black backing. 4K ready.

d. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 10 feet (305 cm) from screen. 4K ready.

e. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 20 feet (610 cm) from screen.









n. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

o. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

p. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.

q. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. 4K ready.

r. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.

3. Tab-Tensioning System.

a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Warranted for 5 years against tab separation. Viewing surface inserted into aluminum bottom dowel.




1) 250 inches (635 cm) diagonal, 148 inches x 198 inches (376 cm x 503 cm).



1) 248 inches (630 cm) diagonal, 121-1/2 inches x 216 inches (309 cm x 549 cm).

c. 16:10. Black masking borders standard.


** NOTE TO SPECIFIER ** Edit the following if an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project. Black is standard for all formats. Note that extra drop will increase the overall length of the case. Select the screen drop type and fill in the drop height from one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). If extra screen drop is not required, delete both paragraphs

5. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with top border matching viewing surface color.


C. Paragon V: Large electrically operated, tab tensioned, extruded aluminum case. Projection screen with motor in roller. 13-1/4 inches high x 12 inches deep (337 mm high x 305 mm deep) case fully enclosed except for slot allowing viewing surface passage. Roller: 6 inches (152 mm) diameter steel tube. Viewing surface securely attached to roller at top and at bottom to weighted dowel. Provided with universal mounting brackets for ceiling or above ceiling mounting.

1. Motor UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

** NOTE TO SPECIFIER ** If wall mounting this screen, optional wall mounting brackets are available. Delete the following paragraph if wall mounting brackets are not required.

2. Wall Mounting Bracket Kit: Kit includes two structural steel brackets and hardware to attach brackets to case. Hardware for mounting to wall structure by others.



a. Matt White XT1000V - On Axis gain of 1.0. 180 degree viewing cone. GREENGUARD Gold certified. Available with or without black backing. 13-1/4 inches high x 12 inches deep. 4K ready.

b. Pure White XT1300V - On Axis gain of 1.3. 180 degree viewing cone. For use in situations where lighting is well controlled and where enhanced brightness is needed due to limited projector brightness. Available with or without black backing. 13-1/4 inches high x 12 inches deep. 4K ready.

c. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 20 feet (610 cm) from screen.

d. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 8K ready. Dark backing.

e. TecVision XH800X UST ALR - For short-throw and ultra-short throw applications. On Axis gain of 0.8. Rejects 57% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

f. TecVision XH900X ALR - On Axis gain of 0.9. Rejects 60% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

g. TecVision CS1000X ALR - On Axis gain of 1.0. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

h. TecVision MS1000X ALR - Rejects 73% of ambient light. On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

i. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready reference screen surface for blending applications, precise resolution, and color accuracy. Dark backing.

j. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone. Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 8K ready. Dark backing.

k. TecVision CS1200X ALR - On Axis gain of 1.2. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

l. TecVision XT1300X White - On Axis gain of 1.3. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

m. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

n. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.

o. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.

p. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. 4K ready.

4. Tab-Tensioning System.

a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of viewing surface to prevent tab separation. Tab adhesives are not acceptable. Warranted for 5 years against tab separation. Viewing surface inserted into aluminum bottom dowel.










** NOTE TO SPECIFIER ** If an extra screen drop is required for the project, fill in the drop height and select the screen border type from one of the following paragraphs and delete the other. Total screen height cannot exceed 24 feet (7.31 m). If not required, delete both paragraphs.



D. Access V: Electric motor operated, steel case. Ceiling-recessed, 18-gauge steel headbox, 7-3/8 inches high x 8-1/16 inches deep (188 mm high x 205 mm deep), including trim flanges with white paint finish and stamped 13-gauge steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and can be released to hang down or be removed for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels and trim for gypsum board ceiling. Access case may be ordered in advance and the screen installed later to eliminate field damage. Screen installs in minutes. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Steel mounting brackets slide in extruded aluminum mounting system along top of case. Brackets supporting roller/fabric assembly slide in tracks inside top of the case, allowing viewing surface to be centered in case. Steel leveling brackets are attached to case to prevent deflection. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and delete the paragraphs not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.

3. System Options:

** NOTE TO SPECIFIER ** Select the required case finish and delete one of the following paragraphs.

a. Case finished textured white (standard).






c. Grey XH600V - On Axis gain of 0.6. Provides excellent contrast and color reproduction. GREENGUARD Gold certified. Maximum size 9 feet x 12 feet (275 cm x 366 cm). Available with or without black backing. 4K ready.

d. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 10 feet (305 cm) from screen. 4K ready.

e. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 20 feet (610 cm) from screen.










o. TecVision XT1600X White - On Axis gain of 1.6. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready. Dark backing.

p. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.

q. CineFlex CH1200V - On Axis gain of 1.2. 60 degree viewing cone. Neutral grey rear projection diffusing surface. Provides high resolution and excellent contrast, even in lighted rooms. Recommended for use with low to medium output projectors. 4K ready.

r. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.


























9) 193 inches (490 cm diagonal, 94-1/2 inches x 168 inches (240 cm x 427 cm).



1) 94 inch (2388 mm) diagonal, 50 inches x 80 inches (12070 mm x (2032 mm).









** NOTE TO SPECIFIER ** Edit the following if an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project. Black is standard for all formats. Note that extra drop will increase the overall length of the case. Select the screen drop type and fill in the drop height from one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). If extra screen drop is not required, delete both paragraphs.

7. Provide an extra screen drop with an overall screen drop of ___ inches (___ mm) with top border matching viewing surface color.


E. Ultimate Access V: Electric motor operated, metal case, independently motorized closure, tab tensioned. Ceiling-recessed, metal headbox, 9-7/8 inches high.x 8 inches deep (251 mm high x 204 mm deep) including trim flanges. UL approved "Suitable for use in environmental air space." Case finished white. Bottom of case consists of an independently motorized trap door that opens up inside the screen case. Trap door and access door both hinge downward to allow access to inside of screen case. Doors remain attached to screen case via a concealed full-length hinge. Releasing one latch at each end of screen case allows doors to hinge downward and a prop arm at each end may be pivoted to engage with endcaps, keeping door assembly in its fully open position. Symmetrical case allows for viewing surface to unroll from the back or front of the roller. Screen is attached to roller with roller brackets. Ultimate Access case may be ordered in advance and the screen installed later to eliminate field damage. Metal roller mounted on rubber isolation mounts.

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and delete the paragraph not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, five wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.

2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, five wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.





c. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. Not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen. 4K ready.

d. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended. Not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 20 feet (610 cm) from screen.

e. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 8K ready. Dark backing.

f. TecVision XH800X UST ALR - For short-throw and ultra-short throw applications. On Axis gain of 0.8. Rejects 57% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

g. TecVision XH900X ALR - On Axis gain of 0.9. Rejects 60% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

h. TecVision CS1000X ALR - On Axis gain of 1.0. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

i. TecVision MS1000X ALR - Rejects 73% of ambient light. On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

j. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready reference screen surface for blending applications, precise resolution, and color accuracy. Dark backing.

k. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone. Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 8K ready. Dark backing.

l. TecVision CS1200X ALR - On Axis gain of 1.2. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.



o. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.


q. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.





a. Custom Size: ________ H x ____________ W.

b. NTSC Format (4:3). Black masking borders and 12 inches (305 mm) extra black drop are standard.








c. HDTV Format (16:9). Black masking borders and 12 inches (305 mm) extra black drop are standard.















** NOTE TO SPECIFIER ** Edit the following if an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project. Black is standard for all formats, viewing surface color is optional. Note that extra drop will increase the overall length of the case. Select the screen drop type and fill in the drop height from one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). If extra screen drop is not required, delete both paragraphs.



F. Ultimate Access XL V: Electric motor operated, metal case, independently motorized closure, tab tensioned. Ceiling-recessed, metal headbox, 14-11/16 inches (373 mm) high x 11 inches (279 mm) deep. UL approved "Suitable for use in environmental air space." Case finished white. Bottom of case consists of an independently motorized trap door that opens up inside screen case. Trap door and access door both hinge downward to allow access to inside of screen case. Doors remain attached to the screen case via a concealed full-length hinge. Releasing one latch at each end of screen case allows doors to hinge downward and a prop arm at each end may be pivoted to engage with endcaps, keeping door assembly in its fully open position. Symmetrical case allows for viewing surface to unroll from the back or front of the roller. Screen is attached to roller with roller brackets. Metal roller mounted on rubber isolation mounts

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and delete the paragraph not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.

1. Motor mounted inside screen roller on rubber isolation insulators. Motor UL certified, rated 110-120V AC, 60 Hz, five wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.

2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db and is UL certified, rated 110-120V AC, 60 Hz, five wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches. Motor with overload protection and electric brake. Motor shall be left mounted.





c. ClearSound NanoPerf XT1000V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent white PVC fabric with microscopic perforations. Not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 10 feet (305 cm) from screen. 4K ready.

d. ClearSound Perf XT900V - On Axis gain of 1.0. 180 degree viewing cone. Acoustically transparent. Flexible matt white perforated surface. Reasonable control of ambient light is recommended. Not recommended for use in sizes less than 80 inches (203 cm) wide or for viewing less than 20 feet (610 cm) from screen.

e. TecVision XH700X Grey - On Axis gain of 0.7. 180 degree viewing cone. Designed for blending applications on curved or flat screens where ambient light is present. Provides very good contrast and color reproduction. Imaging Science Foundation certified and 8K ready. Dark backing.

f. TecVision XH800X UST ALR - For short-throw and ultra-short throw applications. On Axis gain of 0.8. Rejects 57% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

g. TecVision XH900X ALR - On Axis gain of 0.9. Rejects 60% of ambient light. 180 degree viewing cone. Provides very good contrast and color reproduction. Imaging Science Foundation certified. 8K ready. Dark backing.

h. TecVision CS1000X ALR - On Axis gain of 1.0. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

i. TecVision MS1000X ALR - Rejects 73% of ambient light. On Axis gain of 1.0. 70 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.

j. TecVision XT1000X White - On Axis gain of 1.0. 180 degree viewing cone. Imaging Science Foundation certified. 8K ready reference screen surface for blending applications, precise resolution, and color accuracy. Dark backing.

k. TecVision XT1100X White - On-Axis gain of 1.1. 180 degree viewing cone. Designed for use when the projector brightness and size of screen require a minimal increase in gain. Imaging Science Foundation certified and 8K ready. Dark backing.

l. TecVision CS1200X ALR - On Axis gain of 1.2. Rejects 82% of ambient light. 40 degree viewing cone. Provides excellent contrast and color reproduction. Performs well in ambient light. Imaging Science Foundation certified. 8K ready. Dark backing.



o. TecVision XT1800X White - On Axis gain of 1.8. 180 degree viewing cone. Imaging Science Foundation certified. Suited for active 3D or color combining passive 3D systems. 8K ready. Dark backing.


q. CineFlex White XT700V - On Axis gain of 0.7. 180 degree viewing cone. White rear projection surface works well for edge matching or edge blending applications, and also for short throw rear projection. Reasonable control of ambient light is recommended. 4K ready.


a. Viewing surface with integrated tabs and cable on each side of fabric to provide tension and ensure flat viewing surface. Viewing surface and tabs CNC cut as a single piece. Tabs RF welded to the back of vi ewing surface to prevent tab separation. Tab adhesives are not acceptable. Viewing surface inserted into aluminum bottom dowel. Warranted for 5 years against tab separation.



a. Custom Size: ________ H x ____________ W.

b. NTSC Format (4:3). Black masking borders and 12 inches (305 mm) extra black drop are standard.

1) 200 inches (5.08 m) diagonal, 118 inches x 158 inches (2997 mm x 4013 mm).






7) 27-1/2 foot (8.38 m) diagonal, 199 inches x 264 inches (5054 mm x 6706 mm).

c. HDTV Format (16:9). Black masking borders and 12 inches (305 mm) extra black drop are standard.

1) 184 inches (4.67 m) diagonal, 90 x 160 inches (2286 mm x 4064 mm).

2) 193 inches (4.90 m) diagonal, 94-1/2 inches x 168 inches (2400 mm x 4267 mm).



5) 248 inches (630 cm) diagonal, 121 1/2 inches x 216 inches (309 cm x 549 cm).

6) 270 inch (6858 mm) diagonal, 133 inch x 236 inches (3378 mm x 5994 mm).








6) 278 inch diagonal (7061 mm), 147 inches x 236 inches (3734 mm x 5994 mm).


** NOTE TO SPECIFIER ** Edit the following if an extra screen drop exceeding the standard of 12 inches (305 mm) is required for the project. Black is standard for all formats, viewing surface color is optional. Note that extra drop will increase the overall length of the case. Select the screen drop type and fill in the drop height from one of the following paragraphs and delete the other. Total screen height cannot exceed 12 feet (3.66 m). If extra screen drop is not required, delete both paragraphs.



G. Access E: Electric motor operated, steel case. Ceiling-recessed, 18-gauge steel headbox, 7-3/8 inches high x 8-1/16 inches deep (188 mm high x 205 mm wide) including trim flanges with white paint finish and stamped 13-gauge steel end caps. UL approved "Suitable for use in environmental air space." Bottom closure panel forms slot for passage of viewing surface and can be released to hang down or be removed for access to operating mechanism and viewing surface. Bottom perimeter flange provides support and trim for acoustical ceiling panels and trim for gypsum board ceiling. Access case may be ordered in advance and the screen installed later to eliminate field damage. Housing is symmetrical allowing for left and right hand motor locations and for viewing surface to unroll off front or back of roller. Steel mounting brackets slide in extruded aluminum mounting system along top of case. Brackets supporting roller/fabric assembly slide in tracks inside top of case, allowing viewing surface to be centered in case. Steel leveling brackets are attached to case to prevent deflection. Housing designed with internal junction box and plug-in wiring connections to allow housing to be installed and connected to building power supply separately from motor and viewing surface.

** NOTE TO SPECIFIER ** Select one of the following motor paragraphs and the associated control paragraph as required and delete the paragraphs not required. Note that there are size limitations with quiet motors. Contact manufacturer for additional information.


2. Quiet Motor mounted inside screen roller on rubber isolation insulators. Motor operates at 44db. UL certified, rated 110-120V AC, 60 Hz, three wire, instantly reversible, lifetime lubricated with pre-set accessible limit switches.




b. Contrast Grey XH800E - 0.8 On Axis gain. Smooth grey surface provides excellent resolution and enhances color contrast. 180 degree viewing cone. GREENGUARD Gold certified. Maximum size available is 12 feet x 12 feet (366 cm x 366 cm). 4K ready.

c. ClearSound White Weave XT900E - On Axis gain of 0.9. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Acoustical properties are comparable to the highest quality speaker grille cloth. Some control of ambient light is recommended. Flame and mildew resistant. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 10 feet (305 cm) from screen. 4K ready.

d. ClearSound Grey Weave XH600E - On Axis gain of 0.6. 180 degree viewing cone. Acoustically transparent woven blend of fiberglass and PVC. Grey material for higher contrast. Acoustical properties are comparable to the highest quality speaker grille cloth. Flame and mildew resistant. Not recommended for use in sizes less than 80 inches (203 cm) wide. Not recommended for viewing less than 10 feet (305 cm) from screen. 4K ready.

e. Chroma Key Green - Green flexible PVC surface for video production where you need the background to "disappear." Matte finish. Flame retardant, tear resistant, and wrinkle resistant. Offers excellent uniformity and consistent surface color edge to edge. Works effectively throughout 180 degree viewable range.
























9) 193 inches (490 c

· Web view ... 11132-1

Documents

Transcript of · Web view ... 11132-1