60elti.com/uploaded/datoteke/Catalogue/1-Transmitting...TERX AS3212 EIA 3 1/8”,TERX AD3212 7,2 kW...

60

COFDM Supporting each mode according to EN 302 744 (DVB-T) and EN 302 304(DVB-H), EN 302 755 (DVB-T2), TS 102 831 and TS 102 773 (T2-MI). Versions of thestandards supported V1.1.1, V1.2.1, V1.3.1 and V1.4.1, ARIB STB-B31, TR-B14 - ISDB-T/Tb, A/53, A/110 - ATSC

Air & liquid scalable and flexible power ampilfier solutions up to 50 kW of VHF/UHF power

Broadband

The exciter is housed in compact 19” 1U rack mount with the AB class amplifier that provides up to 50 W of UHFand VHF output power. The built-in COFDM modulator features up to 4 ASI inputs and 2 IP stream inputs, andprovides 2k up to extended 32k IFFT operation mode. If the primary transport stream source fails the excitercan seamless switch between the four ASI and IP inputs manually or automatically.

Unit is supporting MFN and SFN operation, featuring an integrated GPS/GLONASS receiver. To optimize transmitterperformance a digital pre-corrector is included with an auto-adaptive digital pre-correction (optional) to correctlinear error distortions of output filters and non-linear distortion of RF power amplifiers and. Compact UHFstandalone transmitter is available in 19" 2U rack mount housing providing 200W (UHF) and 300W (VHF).

Designed for digital and analogue applicationsHigh efficiency, low power consumption designRedundant power suppliesExcellent ruggedness and broadband performanceHot swappable, easy maintainableRobust mechanical structureSettings and measurements can be made through the EDM web interface (exciter required).

Thanks to the broadband Doherty amplifier concept, Elti’s VHF and UHF amplifiers are available in Broadband Dohertymode also which makes terrestrial broadcasting extremely efficient. Due to higher efficiency into comparison toclassical amplifier design, new amplifiers brings to network operator cost reductions over the entire system lifetime.Amplifiers are compact 19’’ only 3U rack mountable as air and liquid cooling solutions. A scalable and flexibleconfiguration allows now higher power density into single rack. The output power of Broadband Doherty Power

The integrated control unit provides full control over the assembly and additional options/features. Control software EDM(WEB based Elti Device Manager) with an user friendly graphic interface comes as standard for all Elti products. It features:

Complete device management/configuration over single IP address,Multilevel password protection and access controlDisplay of operational parametersAlarm and error historyRemote and local operationEasy save and restore configuration settingsRemote assistance and software update

External amplifiers with air or liquid cooling are available in models supplying 200W, 400W, 800W and 1.200Wof COFDM power for UHF band and 300W, 600 W and 900W for VHF band. All amplifiers are designed for broadbandand employ the latest 50-volt LDMOS technology to guarantee linearity, compact design and high efficiency forminimizing operational costs. Selfprotection circuits assure continuous operation and uninterrupted service.

Amplifiers for UHF bands IV/V are 200W, 400W, 800 W and 1.200 W and for VHF band III 300W, 600 W and 900W.

IFFT

IFFT

≤ ±0,25 dB

AUDIO CHARACTERISTICS

UHF Transmitter type

Output

power rms DVB-T/H/T2, ISDB-T/Tb

Output power rms

ATSC

Output power p.s. PAL

No. of external

amplifiers

Output connector

No. Of racks (air, liquid)

Cooling

Compact versions TERX AC4050 60 W 90 W 100 W / N, 50 Ω 19''x1Ux400mm Air

TERX AC4200 200 W 300 W 500 W / N, 50 Ω 19''x2Ux545mm Air With power amplifier EPA41

TERX AS4101 TERX AD4101 200 W 300 W 700 W 1 N, 50 Ω 19''x1Ux400mm+ 19''x3Ux480mm

Air

With power amplifier EPA42

TERX AS4201 TERX AD4201 400 W 600 W 1,0 kW 1 EIA 7/8”, 50 Ω 19''x1Ux400mm+

19''x3Ux480mm Air

With power amplifier EPA44, EPA44L

TERX AS4401 TERX AD4401 800 W 1,2 kW 2,0 kW 1

EIA 1 5/8”, 50 Ω

1 rack Air

Liquid TERX LS4401 TERX LD4401

TERX AS4402 TERX AD4402 1,6 kW 2,4 kW 4,0 kW 2

EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 3 1/8”,

50 Ω 1 rack

Air



EIA 3 1/8”, 50 Ω

1 rack Air



EIA 3 1/8”, 50 Ω

2 racks Air



EIA 3 1/8”, 50 Ω

2 racks Air




EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 3 1/8”,

50 Ω 1 rack

Air



EIA 3 1/8”,

50 Ω 1 rack

Air



EIA 3 1/8”, 50 Ω

1 rack Air



EIA 3 1/8”, 50 Ω

1 rack Air



EIA 4 1/2”, 50 Ω

2 racks Air



EIA 4 1/2”, 50 Ω

2 racks Air


VHF Transmitter type

Output

power rms DVB-T/H/T2, ISDB-T/Tb

Output

power rms ATSC

Output

power p.s. PAL

No. of

external amplifiers

Output connector

No. Of racks (air, liquid)

Cooling

Compact versions TERX AC3050 60 W 110 W 100 W / N, 50 Ω 19''x1Ux400mm Air

TERX AC3300 300 W 470 W 500 W / N, 50 Ω 19''x2Ux545mm Air With power amplifier EPA31

TERX AS3101 TERX AD3101 300 W 560 W 1,0 kW 1 N, 50 Ω 19''x1Ux400mm+ 19''x3Ux600mm

Air

With power amplifier EPA32, EPA32L TERX AS3201 TERX AD3201

600 W 1,1 kW 2,0 kW 1 EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 3 1/8”, 50 Ω

1 rack Air



EIA 3 1/8”,

50 Ω 2 racks

Air



EIA 3 1/8”,

50 Ω 2 racks

Air



TERX AS3301 TERX AD3301 900 W 1,6 kW 2,0 kW 1

EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”, 50 Ω

1 rack Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 1 5/8”,

50 Ω 1 rack

Air



EIA 3 1/8”,

50 Ω 1 rack

Air



EIA 3 1/8”, 50 Ω

1 rack Air



EIA 3 1/8”, 50 Ω

2 racks Air



EIA 3 1/8”, 50 Ω

2 racks Air


60elti.com/uploaded/datoteke/Catalogue/1-Transmitting...TERX AS3212 EIA 3 1/8”,TERX AD3212 7,2 kW...

Documents

Transcript of 60elti.com/uploaded/datoteke/Catalogue/1-Transmitting...TERX AS3212 EIA 3 1/8”,TERX AD3212 7,2 kW...