· Effective Jan. 1, 2013. See for updated info.
Transcript of · Effective Jan. 1, 2013. See for updated info.
Section 10
Contain-It™ Secondary Containment Piping System
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Glossary
S = Contain-It™ Socket
SPG = Spigot End (same dimension as pipe outside diameter)
MPT = Male Pipe Thread
FPT = Female Pipe Thread
Product Line Description
39 Fittings 41 Pipe42 Accessories
The technical information given in this publication implies no warranty of any kind and is subject to change without notice. Please consult our Terms and Conditions of Sale.
Not for Use with Compressed Air or Gases
DO NOT TEST with Air or Air over Water
GF Piping DOES NOT RECOMMEND the use of thermoplastic piping products for systems to transport or store compressed air
or gases, or the testing of thermoplastic piping systems with compressed air or gases in above or below ground locations. The
use of GF Piping products in compressed air or gas systems automatically voids the warranty for such products, and their use
against our recommendation is entirely the responsibility and liability of the installer. GF Piping will not accept responsibility
for damage or impairment from its products, or other consequential or incidental damages caused by misapplication,
incorrect assembly, and/or exposure to harmful substances or conditions. The only exception to this recommendation is when
testing the Contain-It™ Secondary System or the Fuseal Squared™ Double Containment Piping System’s containment joints.
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
10.3
Contain-It™ Clear PVCPage
Contain-It Pipe 10.4
Contain-It Fittings 10.5
Contain-It Terminations 10.9
Contain-It Centralizers 10.11
Contain-It Accessories 10.12
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.4
Contain-It PipeSplit PipeSize[inch]
lengths[ft]
Part No. USD/ft Lift Qty[ft]
Mini-mum Or-der Qty[ft]
O.D.[inch]
Minimum I.D.[inch]
4 10 37L015040 * 20.32 360 60 4.215 3.5256 10 37L015060 * 42.46 120 20 6.275 5.375
Solid PipeSize[inch]
lengths[ft]
Part No. USD/ft Lift Qty[ft]
Mini-mum Or-der Qty[ft]
O.D.[inch]
Minimum I.D.[inch]
4 20 37L026040 * 11.52 520 20 4.215 3.8826 20 37L026060 * 24.26 340 20 6.275 5.782
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.5
Contain-It FittingsContainment Coupling - Standard, Split (S x S)Size[inch]
Part No. USD PackQty
C[inch]
G[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 4629-040 80.08 5 2.00 0.38 4.38 5.81 4.69 3.886 4629-060 120.12 5 2.75 0.38 5.81 8.19 6.88 5.97
Containment Coupling - Extended, Split (S x S)Maximum Gap: 5.50"Size[inch]
Part No. USD PackQty
C[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 4629-040E 88.58 5 5.00 10.00 5.81 4.69 3.886 4629-060E 127.40 5 5.75 11.50 8.19 6.88 5.97
Containment Coupling - Reducing, Split (S x S)Size[inch]
Part No. USD PackQty
C1[inch]
C2[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
6 x 4 4629-532 160.16 5 2.00 2.75 5.81 8.19 6.88 5.97
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.6
Containment 90° Ell, Split (SxS)Size[inch]
Part No. USD PackQty
C[inch]
G[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 4606-040 104.34 5 2.00 2.44 5.81 4.69 3.886 4606-060 160.16 5 2.75 3.38 8.19 6.88 5.97
Containment 45° Ell, Split (S x S)Size[inch]
Part No. USD PackQty
C[inch]
G[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 4617-040 104.34 5 2.00 1.00 5.81 4.69 3.886 4617-060 160.16 5 2.75 1.75 8.19 6.88 5.97
Containment Tee, Split (S x S x S)Size[inch]
Part No. USD PackQty
C[inch]
G[inch]
H[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 4601-040 121.34 5 2.00 2.38 7.19 8.63 5.81 4.69 3.886 4601-060 175.94 5 2.75 3.44 10.25 12.44 8.19 6.88 5.97
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.7
Containment 45° Wye, Split (S x S x S)Size[inch]
Part No. USD PackQty
C[inch]
G[inch]
GJ[inch]
L[inch]
N[inch]
W[inch]
O.D.[inch]
I. D.[inch]
4 4683-040 160.16 5 2.00 0.75 5.88 11.00 7.13 5.81 4.69 3.886 4683-060 230.54 5 2.75 1.81 7.75 15.19 9.75 8.19 6.88 5.97
Containment Cap, One Piece (S)Size[inch]
Part No. USD PackQty
C[inch]
L[inch]
O.D.[inch]
4 4647-040 65.52 5 1.75 1.94 4.506 4647-060 95.86 5 2.75 3.19 6.75
Containment Female Adapter, One Piece (S x FPT)Size[inch]
Part No. USD PackQty
C[inch]
L[inch]
O.D.[inch]
4 4635-040 80.08 5 1.75 3.18 5.006 4635-060 121.34 5 3.00 5.00 6.75
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.8
Plug, One Piece (MPT)Size[inch]
Part No. USD PackQty
4 4650-040 65.52 56 4650-060 95.86 5
Adapter Sleeve, One Piece (IPS Spg x S)Size[inch]
Part No. USD PackQty
4 x 4 4687-040 65.52 106 x 6 4687-060 95.86 10
Containment PPFR Floor Drain, One Piece (IPS Spg xMPT)For use with Fuseal primary piping only.Must use 4635-060 for Contain-It transition.Size[inch]
Part No. USD
3 x 6 46104-530 * 825.064 x 6 46104-532 * 825.06
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.9
Contain-It TerminationsTermination Fitting - Rigid PVC, Split (S to IPS)Size[inch]
Part No. USD C[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 x 1∕2 4628-415 * 134.68 2.00 4.44 5.81 4.69 3.884 x 3∕4 4628-416 * 134.68 2.00 4.44 5.81 4.69 3.884 x 1 4628-417 * 134.68 2.00 4.44 5.81 4.69 3.88
4 x 1 1∕4 4628-418 * 134.68 2.00 4.44 5.81 4.69 3.884 x 1 1∕2 4628-419 134.68 2.00 4.44 5.81 4.69 3.88
4 x 2 4628-420 134.68 2.00 4.44 5.81 4.69 3.886 x 2 1∕2 4628-529 * 194.14 2.75 5.81 8.19 6.88 5.97
6 x 3 4628-530 194.14 2.75 5.81 8.19 6.88 5.976 x 4 4628-532 194.14 2.75 5.81 8.19 6.88 5.97
Test Termination Fitting - Rigid PVC, Split (S to IPS)Size[inch]
Part No. USD C[inch]
L[inch]
W[inch]
O.D.[inch]
I.D.[inch]
4 x 2 4628-420T 140.74 2.00 4.44 5.81 4.69 3.886 x 4 4628-532T 200.20 2.75 5.81 8.19 6.88 5.97
Termination Fitting - Flexible Alcryn, One PieceContain-It to IPS/MetricSize[inch]
Size[mm]
Part No. USD
4 x 1∕2 20 4628-415A 80.084 x 3∕4 25 4628-416A 80.084 x 1 32 4628-417A 80.08
4 x 1 1∕4 40 4628-418A 80.084 x 1 1∕2 50 4628-419A 80.08
4 x 2 63 4628-420A 80.086 x 2 1∕2 75 4628-529A 236.60
6 x 3 90 4628-530A 236.606 x 4 110 4628-532A 236.60
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.10
Test Termination Fitting - Flexible Alcryn, One PieceContain-It to IPS/MetricSize[inch]
Size[mm]
Part No. USD
4 x 1∕2 20 4628-415AT 86.144 x 3∕4 25 4628-416AT 86.144 x 1 32 4628-417AT 86.14
4 x 1 1∕4 40 4628-418AT 86.144 x 1 1∕2 50 4628-419AT 86.14
4 x 2 63 4628-420AT 86.146 x 2 1∕2 75 4628-529AT 242.66
6 x 3 90 4628-530AT 242.666 x 4 110 4628-532AT 242.66
Termination Fitting - Flexible Alcryn, One PieceContain-It to Copper Tube SizeSize[inch]
Part No. USD
4 x 1∕2 4628-415AC 80.084 x 3∕4 4628-416AC 80.084 x 1 4628-417AC 80.08
4 x 1 1∕4 4628-418AC 80.084 x 1 1∕2 4628-419AC 80.08
4 x 2 4628-420AC 80.086 x 2 4628-528AC 212.94
6 x 2 1∕2 4628-529AC 236.606 x 3 4628-530AC 236.606 x 4 4628-532AC 236.60
Test Termination Fitting - Flexible Alcryn, One PieceContain-It to Copper Tube SizeSize[inch]
Part No. USD
4 & 1∕2 4628-415ATC 86.144 & 3∕4 4628-416ATC 86.144 & 1 4628-417ATC 86.14
4 & 1 1∕4 4628-418ATC 86.144 & 1 1∕2 4628-419ATC 86.14
4 & 2 4628-420ATC 86.146 & 2 4628-528ATC 218.40
6 & 2 1∕2 4628-529ATC 242.666 & 3 4628-530ATC 242.666 & 4 4628-532ATC 242.66
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.11
Contain-It CentralizersCentralizer (Contain-It x IPS)Size[inch]
d Part No. USD PackQty
4 x 1∕2 4686-415 * 41.26 254 x 3∕4 4686-416 * 41.26 254 x 1 4686-417 * 18.20 25
4 x 1 1∕4 4686-418 * 41.26 254 x 1 1∕2 4686-419 * 18.20 25
4 x 2 4686-420 * 18.20 256 x 2 1∕2 4686-529 * 55.82 25
6 x 3 4686-530 * 24.26 256 x 4 4686-532 * 24.26 256 x 1∕2 Twin 4686-811 * 134.68 56 x 3∕4 Twin 4686-813 * 134.68 56 x 1 Twin 4686-815 * 134.68 5
Centralizer (Contain-It x Copper Tube Size)Size[inch]
Part No. USD PackQty
4 x 1∕2 4686-415C * 41.26 104 x 3∕4 4686-416C * 41.26 104 x 1 4686-417C * 41.26 10
4 x 1 1∕4 4686-418C * 41.26 104 x 1 1∕2 4686-419C * 41.26 10
4 x 2 4686-420C * 41.26 106 x 2 4686-528C * 53.67 10
6 x 2 1∕2 4686-529C * 55.82 106 x 3 4686-530C * 55.82 106 x 4 4686-532C * 55.82 10
Centralizer (Contain-It x Metric)Size d Part No. USD Pack
Qty
4 x 20 4686-712 * 41.26 254 x 25 4686-713 * 41.26 254 x 32 4686-714 * 41.26 254 x 40 4686-715 * 41.26 254 x 50 4686-716 * 41.26 25
4 x 63 4686-717 * 41.26 256 x 75 4686-719 * 55.82 256 x 90 4686-720 * 55.82 25
6 x 110 4686-721 * 55.82 256 x 20 Twin 4686-812 * 134.68 56 x 25 Twin 4686-814 * 134.68 56 x 32 Twin 4686-816 * 134.68 5
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.12
Contain-It AccessoriesFitting ClipSize Part No. USD Pack
Qty
4 & 6 4693-101 * 0.55 25
Pipe ClampSize Part No. USD
4 & 6 4693-102 * 491.40
Drill BitsSize Part No. USD
4 4693-104 * 60.666 4693-106 * 121.21
Test Gauge
Size Part No. USD
4 & 6 4693-150 * 62.40
Manual Injection Gun - System IId Part No. USD
4 & 6 4694-200 * 552.06
Pneumatic Injection Gun - System IId Part No. USD
4 & 6 4694-201 * 1516.66
Adhesive Cartridge - System IILimited Shelf Life of 18 Monthsd Part No. USD Pack
Qty
4 & 6 4694-302 * 72.80 12
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
Contain-It™ Clear PVC
^ = 40% Restock Charge* = Non-Cancelable/Non-Returnable
10.13
Mixing Tips - System IIDescription Part No. USD Pack
Qty
Straight 4694-303 * 6.98 10Bent 4694-307 * 18.80 10
Flexible 4694-306 * 32.76 10
Effective Jan. 1, 2013. See www.gfpiping.com for updated info.
FittingsQuantity of 4” Tees and Wyes _________ x 3 = _________
Quantity of 4” Fittings _________ x 2 = _________(other than tees and wyes)
_________ /14 = __________
Quantity of 6” Tees and Wyes _________ x 3 = _________
Quantity of 6” Fittings _________ x 2 = _________(other than tees and wyes)
_________ /10 = (+) __________
Split Pipe
_______ Feet 4” Split Pipe/20 (1 cartridge will fi ll 20 ft., both sides) = (+) __________
_______ Feet 6” Split Pipe/10 (1 cartridge will fi ll 10 ft., both sides) = (+) __________
TOTAL CARTRIDGES ____________
Adhesive Requirements
Contain-It™ Cartridge Fittings/Pipe # of Sockets/Tube1 cartridge 4” fi ttings 14
1 cartridge 6” fi ttings 10
1 cartridge 4” pipe 20 ft. length, both sides
1 cartridge 6” pipe 10 ft. length, both sides
Adhesive Cartridge Requirements Calculation
This table is designed to assist in the accurate determination of the number of adhesive cartridges
required for a specifi c project.
10.14 Effective Jan. 1, 2013. See www.gfpiping.com for updated info.