Post on 22-Aug-2020
ZF 2
0150
126-
IVZh
afir V
en
usⅡ
Series
Zhafir Venus SeriesSpecifications / International
ZHAFIR PLASTICS MACHINERY GMBHJubatus-Allee 8-1092263 EbermannsdorfGermany Tel. +49-9438-9412-0Fax. +49-9438-9412-150E-Mail: contact@zhafir.com www.zhafir.com
NINGBO ZHAFIR PLASTICS MACHINERY CO., LTDNo. 299 Lehai Road, Chunxiao, Beilun, Ningbo, P.R. China 315800Tel. +86-574-86182986Fax. +86-574-86182977E-Mail: contact@mail.zhafir.cnwww.zhafir.cn
400-6500kN
mounting plane of fixed platen
top plane of fixed platen
24
14
14
11
A-A70210
12×M12 L25
Ø60
140
210
280
350
50h, 50 3507 421 1096 265 1104 175 1530 1763 Ø100 Ø2.23563
2 3
VE400 Ⅱ
400
235
150
320
555
320×280
205×180
60
9.8 (1.0)
460×440
A B C
19 22 26
20 20 17
21 36 50
19.1 32.8 45.5
400
3.8 6.0 8.8
9.8 (1.0)
4.1 5.0 5.0
80
200
50 68 96
260 220 157
2600 2200 1570
208 175 125
2080 1750 1250
80h
350
90 121 169
260 220 157
2600 2200 1570
208 175 125
2080 1750 1250
A B
16 19
21 20
12 17
11 15.5
400
2.5 3.8
9.8 (1.0)
3.2 4.1
50
200
36 50
280 260
2800 2600
234 198
2340 1980
50h
350
64 90
280 260
2800 2600
234 198
2340 1980
80:12/21.4 80h:19/34
15
3.62×1.2×1.75
2。8
50:10/18 50h:14.5/26
15
3.62×1.2×1.75
2.8
Technical data VE400ⅡMachine dimensions VE400Ⅱ
Platen dimensions VE400Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
4 5
VE600 Ⅱ
600
270
150
370
640
370×320
240×205
70
19.6 (2.0)
545×505
80:12/21.4 120:15.1/27 80h:19/34 120h:25/44.7
15 15
3.74×1.22×1.8 3.86×1.22×1.8
3.3 3.5
A B C A B C
19 22 26 22 26 30
20 20 17 20 20 17.4
21 36 50 36 58 78
19.1 32.8 45.5 33 52 70
400 400
3.8 6.0 8.8 6.0 8.8 13
14.7 (1.5) 14.7 (1.5)
4.1 5.0 5.0 5.3 6.8 6.8
80 120
200 200
50 68 96 69 96 128
260 220 157 280 220 165
2600 2200 1570 2800 2200 1650
208 175 125 220 160 120
2080 1750 1250 2200 1600 1200
80h 120h
350 350
90 121 169 121 169 225
260 220 157 280 220 165
2600 2200 1570 2800 2200 1650
208 175 125 220 160 120
2080 1750 1250 2200 1600 1200
Technical data VE600ⅡMachine dimensions VE600Ⅱ
Platen dimensions VE600Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
A B C A B C AA A B C
22 26 30 26 28 30 26 28 32 36
20 20 17.4 21 21 19.6 21 21 21 18.6
36 58 78 58 67 78 61 70 100 127
33 52 70 52 61 70 55 64 91 116
400 400 400
6.0 8.8 13 8.8 11 13 8.8 11 16 22
19.6 (2.0) 19.6 (2.0) 19.6 (2.0)
5.3 6.8 6.8 6.8 7.8 7.8 5.4 7.5 8.0 8.0
120 160 210
200 200 200
69 96 128 96 112 128 96 112 146 185
280 220 165 260 220 192 280 260 200 160
2800 2200 1650 2600 2200 1920 2800 2600 2000 1600
220 160 120 160 138 120 224 206 160 126
2200 1600 1200 1600 1380 1200 2240 2060 1600 1260
120h 160h 210h
350 350 350
121 169 225 169 196 225 169 196 256 324
280 220 165 260 220 192 280 260 200 160
2800 2200 1650 2600 2200 1920 2800 2600 2000 1600
220 160 120 160 138 120 224 206 160 126
2200 1600 1200 1600 1380 1200 2240 2060 1600 1260
120:15.1/27 160:17.5/31 210:20/37 120h:25/44.7 160h:28/50 210h:31/55
15 15 25
4.06×1.29×1.91 4.10×1.29×1.91 4.33×1.29×1.91
4.2 4.3 4.4
6 7
VE900 Ⅱ
900
320
150
410
730
420×370
270×240
80
19.6 (2.0)
615×570
Technical data VE900ⅡMachine dimensions VE900Ⅱ
Platen dimensions VE900Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
210:20/37 300:25.7/46 430:32.3/57 210h:31/55 300h:36.7/65 430h:43.3/77
25 25 25
4.64×1.36×1.99 4.93×1.36×1.99 5.24×1.36×1.99
5.5 5.6 6
AA A B C AA A B C A B C
26 28 32 36 30 32 36 40 36 40 45
21 21 21 18.6 21 22.5 20 18 23.3 21 18.7
61 70 100 127 102 116 147 182 173 213 270
55 64 91 116 92 106 134 166 157 194 246
400 400 400
8.8 11 16 22 12.8 16 22 30 22 30 42
24.5 (2.5) 24.5 (2.5) 24.5 (2.5)
5.4 7.5 8.0 8.0 7.7 9.9 9.9 9.9 12.6
210 300 430
200 200 200
96 112 146 185 128 146 184 228 184 228 289
280 260 200 160 280 253 200 162 247 200 158
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580
224 206 160 126 224 202 160 130 197 160 126
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260
210h 300h 430h
350 300 300
169 196 256 324 193 220 277 342 277 342 434
280 260 200 160 280 253 200 162 247 200 158
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580
224 206 160 126 224 202 160 130 197 160 126
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260
8 9
VE1200 Ⅱ
1200
360
150
480
840
470×420
305×270
100
29.4 (3.0)
690×640
A B C
26 28 30
21 21 19.6
58 67 78
52 61 70
400
8.8 11 13
24.5 (2.5)
6.8 7.8 7.8
160
200
96 112 128
260 220 192
2600 2200 1920
160 138 120
1600 1380 1200
160h
350
169 196 225
260 220 192
2600 2200 1920
160 138 120
1600 1380 1200
160:17.5/31160h:28/50
15
4.59×1.36×1.99
5.4
Technical data VE1200ⅡMachine dimensions VE1200Ⅱ
Platen dimensions VE1200Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
AA A B C AA A B C A B C A B C
26 28 32 36 30 32 36 40 36 40 45 40 45 50
21 21 21 18.6 21 22.5 20 18 23.3 21 18.7 22.5 20 18
61 70 100 127 102 116 147 182 173 213 270 252 319 395
55 64 91 116 92 106 134 166 157 194 246 229 290 358
400 400 400 350
8.8 11 16 22 12.8 16 22 30 22 30 42 27 39 50
19.6 (2.0) 29.4 (3.0) 29.4 (3.0) 29.4 (3.0)
5.4 7.5 8.0 8.0 7.7 9.9 9.9 9.9 12.6 14.2
210 300 430 640
200 200 200 160
96 112 146 185 128 146 184 228 184 228 289 183 231 285
280 260 200 160 280 253 200 162 247 200 158 253 200 162
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620
224 206 160 126 224 202 160 130 197 160 126 202 160 130
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260 2020 1600 1300
210h 300h 430h 640h
350 300 300 250
169 196 256 324 193 220 277 342 277 342 434 285 360 445
280 260 200 160 280 253 200 162 247 200 158 253 200 162
2800 2600 2000 1600 2800 2530 2000 1620 2470 2000 1580 2530 2000 1620
224 206 160 126 224 202 160 130 197 160 126 202 160 130
2240 2060 1600 1260 2240 2020 1600 1300 1970 1600 1260 2020 1600 1300
10 11
VE1500 Ⅱ
1500
420
180
520
940
520×470
335×305
120
34.3 (3.5)
770×730
210:20/37 300:25.7/46 430:32.3/57 640:39/69 210h:31/55 300h:36.7/65 430h:43.3/77 640h:57/101
25 25 25 25
4.90×1.46×2.08 5.16×1.46×2.08 5.47×1.46×2.08 5.67×1.46×2.08
7 7.1 7.3 7.7
Technical data VE1500ⅡMachine dimensions VE1500Ⅱ
Platen dimensions VE1500Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
Note:The above machine size does not apply to the 640h and 640 injection unit.
AA A B C A B C A B C A B C
30 32 36 40 36 40 45 40 45 50 45 50 55
21 22.5 20 18 23.3 21 18.7 22.5 20 18 22.2 20 18
102 116 147 182 173 213 270 252 319 395 334 412 499
92 106 134 166 157 194 246 229 290 358 304 375 454
400 400 350 320
12.8 16 22 30 22 30 42 27 39 50 35 46 60
24.5 (2.5) 39.2 (4.0) 39.2 (4.0) 39.2 (4.0)
7.7 9.9 9.9 9.9 12.6 14.2 19
300 430 640 830
200 200 160 160
128 146 184 228 184 228 289 183 231 285 231 285 346
280 253 200 162 247 200 158 253 200 162 247 200 165
2800 2530 2000 1620 2470 2000 1580 2530 2000 1620 2470 2000 1650
224 202 160 130 197 160 126 202 160 130 197 160 132
2240 2020 1600 1300 1970 1600 1260 2020 1600 1300 1970 1600 1320
300h 430h 640h 830h
300 300 250 250
193 220 277 342 277 342 434 285 360 445 362 446 594
280 253 200 162 247 200 158 253 200 162 247 200 165
2800 2530 2000 1620 2470 2000 1580 2530 2000 1620 2470 2000 1650
224 202 160 130 197 160 126 202 160 130 197 160 132
2240 2020 1600 1300 1970 1600 1260 2020 1600 1300 1970 1600 1320
300:25.7/46 430:32.3/57 640:39/69 830:47.5/85 300h:36.7/65 430h:43.3/77 640h:57/101 830h:65/116
25 25 25 50
5.46×1.57×2.18 5.77×1.57×2.18 5.98×1.57×2.18 6.19×1.57×2.18
8.5 8.8 8.9 9.7
12 13
VE1900 Ⅱ
1900
470
200
550
1020
570×520
370×335
130
44.1 (4.5)
840×790
Technical data VE1900ⅡMachine dimensions VE1900Ⅱ
Platen dimensions VE1900Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
Note:The above machine size does not apply to the 830h and 830 injection unit.
A B C A B C A B C A B C
36 40 45 40 45 50 45 50 55 50 55 60
23.3 21 18.7 22.5 20 18 22.2 20 18 22 20 18.3
173 213 270 252 319 395 334 412 499 471 570 678
157 194 246 229 290 358 304 375 454 428 518 617
400 350 320 320
22 30 42 27 39 50 35 46 60 46 60 71
29.4 (3.0) 49 (5.0) 49 (5.0) 54 (5.5)
12.6 14.2 19 23.4
430 640 830 1100 200 160 160 160
184 228 289 183 231 285 231 285 346 285 346 411
247 200 158 253 200 162 247 200 165 218 180 151
2470 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 1510
197 160 126 202 160 130 197 160 132 194 160 134
1970 1600 1260 2020 1600 1300 1970 1600 1320 1940 1600 1340
430h 640h 830h 1100h
300 250 250 250
277 342 434 285 360 445 362 446 594 446 540 642
247 200 158 253 200 162 247 200 165 218 180 151
2470 2000 1580 2530 2000 1620 2470 2000 1650 2180 1800 1510
197 160 126 202 160 130 197 160 132 194 160 134
1970 1600 1260 2020 1600 1300 1970 1600 1320 1940 1600 1340
430:32.3/57 640:39/69 830:47.5/85 1100:51/92 430h:43.3/77 640h:57/101 830h:65/116 1100h:73.2/130
25 25 50 50
6.18×1.73×2.3 6.22×1.73×2.3 6.44×1.73×2.3 6.76×1.73×2.3
11.3 11.5 11.8 12.5
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
100400
400
140
280
420
560
700
140280420560700
12×Ø38
36×M20 L45
A-A
Ø100
Ø200
14 15
VE2300 Ⅱ
2300
550
220
600
1150
620×620
400×400
150
49 (5.0)
920×920
Technical data VE2300ⅡMachine dimensions VE2300Ⅱ
Platen dimensions VE2300Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
Note:The above machine size does not apply to the 1100h and 1100 injection unit.
A B C A B C A B C A B C
45 50 55 50 55 60 55 60 65 60 65 70
22.2 20 18 22 20 18.3 21.8 20 18.5 21.6 20 18.6
334 412 499 471 570 678 617 735 863 792 929 1078
304 375 454 428 518 617 562 668 785 720 845 980
320 320 300 250
35 46 60 46 60 71 56 70 81 60 70 85
54 (5.5) 54 (5.5) 54 (5.5) 54 (5.5)
19 23.4 27.8 32
830 1100 1400 1700
160 160 160 160
231 285 346 285 346 411 346 411 483 411 483 560
247 200 165 218 180 151 214 180 153 210 180 155
2470 2000 1650 2180 1800 1510 2140 1800 1530 2100 1800 1550
197 160 132 194 160 134 190 160 136 187 160 138
1970 1600 1320 1940 1600 1340 1900 1600 1360 1870 1600 1380
830h 1100h 1400h 1700h
250 250 250 250
362 446 594 446 540 642 540 642 754 642 754 875
247 200 165 218 180 151 214 180 153 210 180 155
2470 2000 1650 2180 1800 1510 2140 1800 1530 2100 1800 1550
197 160 132 194 160 134 190 160 136 187 160 138
1970 1600 1320 1940 1600 1340 1900 1600 1360 1870 1600 1380
830:47.5/85 1100:51/92 1400:56/101 1700:72/129 830h:65/116 1100h:73.2/130 1400h:76.8/138 1700h:95/168
50 50 50 50
6.94×1.99×2.37 7.04×1.99×2.37 7.33×1.99×2.37 7.59×1.99×2.37
14.8 15.4 16.2 16.3
( 1400h,1400 )
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
400
100400
280
420
560
700
840
280420560700840
12×Ø38
28×M20 L45
A-A
Ø100
Ø200
16 17
VE3000 Ⅱ
3000
600
240
650
1250
720×720
470×470
150
58.8 (6.0)
1040×1040
Technical data VE3000ⅡMachine dimensions VE3000Ⅱ
Platen dimensions VE3000Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
Note:The above machine size does not apply to the 1700h and 1700 injection unit.
A B C A B C A B C A B C
50 55 60 55 60 65 60 65 70 65 70 80
22 20 18.3 21.8 20 18.5 21.6 20 18.6 21.5 20 17.5
471 570 678 617 735 863 792 929 1078 1068 1239 1619
428 518 617 562 668 785 720 845 980 972 1127 1473
320 300 250 210
46 60 71 56 70 81 60 70 85 60 80 105
54 (5.5) 54 (5.5) 54 (5.5) 63.7 (6.5)
23.4 27.8 32 38
1100 1400 1700 2250
160 160 160 160
285 346 411 346 411 483 411 483 560 483 560 731
218 180 151 214 180 153 210 180 155 210 180 138
2180 1800 1510 2140 1800 1530 2100 1800 1550 2100 1800 1380
194 160 134 190 160 136 187 160 138 190 162 124
1940 1600 1340 1900 1600 1360 1870 1600 1380 1900 1620 1240
1100h 1400h 1700h --
250 250 250 --
446 540 642 540 642 754 642 754 875 -- -- --
218 180 151 214 180 153 210 180 155 -- -- --
2180 1800 1510 2140 1800 1530 2100 1800 1550 -- -- --
194 160 134 190 160 136 187 160 138 -- -- --
1940 1600 1340 1900 1600 1360 1870 1600 1380 -- -- --
1100:51/92 1400:56/101 1700:72/129 2250:82/147 1100h:73.2/130 1400h:76.8/138 1700h:95/168 --
50 50 50 50
7.36×2.1×2.44 7.70×2.1×2.44 7.86×2.1×2.44 8.32×2.1×2.44
18.2 19 19.1 21
VE3600 Ⅱ
3600
700
250
710
1410
820×820
540×540
160
58.8 (6.0)
1150×1150
254
2554130
1547 53914727348
15451545 1371714 1300 3886
EF
GH
105-
130
3437 CBA
D
2146
292
1658
190
1016 1085
46211641426
1983
180
( 1100h, 1100 )
60
115
115
4xM10 L20166
( 1400h,1400 )
80
115
115
4xM10 L20217
( 1700h,1700 )
80
115
115700
40
3514
0
980
4xM10 L20
1100h, 1100 7363 1271 2085 570 1388 243 2104 2232 Ø200 Ø3
1700h,1700 7868 1528 2333 570 1388 248 2063 2237 Ø200 Ø3 1400h,1400 7655 1366 2282 570 1388 248 2093 2237 Ø200 Ø3
A B C D E F G H I J
D
700 250-710
50
I J
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
150
400
100400700
280
420
560
700
840
980
280420560700840980
4×Ø58
12×Ø38
52×M20 L45
A-A
Ø200
Ø120
18 19
Technical data VE3600ⅡMachine dimensions VE3600Ⅱ
Platen dimensions VE3600Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
Note:The above machine size does not apply to the 2250 injection unit.
A B C A B C A B C
60 65 70 65 70 80 75 80 90
21.6 20 18.6 21.5 20 17.5 21.3 20 17.8
792 929 1078 1068 1239 1619 1634 1860 2354
720 845 980 972 1127 1473 1487 1693 2142
250 210 185
60 70 85 60 80 105 80 90 110
54 (5.5) 63.7 (6.5) 63.7 (6.5)
32 38 42
1700 2250 3350
160 160 160
411 483 560 483 560 731 643 731 926
210 180 155 210 180 138 205 180 142
2100 1800 1550 2100 1800 1380 2050 1800 1420
187 160 138 190 162 124 185 162 128
1870 1600 1380 1900 1620 1240 1850 1620 1280
1700h -- --
250 -- --
642 754 875 -- -- -- -- -- --
210 180 155 -- -- -- -- -- --
2100 1800 1550 -- -- -- -- -- --
187 160 138 -- -- -- -- -- --
1870 1600 1380 -- -- -- -- -- --
166
( 1400h,1400 ) ( 1700h,1700 )
170
170
80
115
115
4xM10 L20
1400h,1400 8313 1366 2282 650 1404 248 2109 2253 Ø200 Ø3 8720 4720 888 950 904 844
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
150
400
700
100
L6
150400700
280
420
560
700
840
980
1120
2804205607008409801120
12×Ø38
60×M20 L40
A-A
Ø120
Ø200
8×Ø58
L6
SR15SR15SR10SR10
20 21
VE4500 Ⅱ
4500
800
350
800
1600
870×870
570×570
180
98 (10.0)
1270×1270
1700:72/129 2250:82/147 3350:111/198 1700h:95/168 -- --
50 50 100
8.72×2.25×2.38 8.9×2.25×2.38 9.46×2.25×2.4
25.9 26.4 28.1
A B C
55 60 65
21.8 20 18.5
617 735 863
562 668 785
300
56 70 81
54 (5.5)
27.8
1400
160
346 411 483
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400h
250
540 642 754
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400:56/1011400h:76.8/138
50
8.72×2.25×2.38
25.8
Technical data VE4500ⅡMachine dimensions VE4500Ⅱ
Platen dimensions VE4500Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
A B C A B C
65 70 80 75 80 90
21.5 20 17.5 21.3 20 17.8
1068 1239 1619 1634 1860 2354
972 1127 1473 1487 1693 2142
210 185
60 80 105 80 90 110
63.7 (6.5) 63.7 (6.5)
38 42
2250 3350
160 160
483 560 731 643 731 926
210 180 138 205 180 142
2100 1800 1380 2050 1800 1420
190 162 124 185 162 128
1900 1620 1240 1850 1620 1280
-- --
-- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --840
40
105
140
1120
15
1060 1335 572 L2 L3 L4 L5785 400 300 300
L
1472830 1125 L1
EF
GH
105-1
30
4400 CBA
D
D
900 380-880
50
I J
2206
292
1702
185
12651175
62214041691
2166
290
165
3350 9846 1820 2906 720 1460 277 1922 2347 Ø250 Ø4 2250 9285 1616 2549 720 1460 270 1890 2340 Ø250 Ø4 1700h,1700 8911 1528 2333 650 1460 248 2135 2309 Ø250 Ø3 1400h,1400 8698 1366 2282 650 1460 248 2165 2309 Ø250 Ø3
A B C D E F G H I J L L1 L2 L3 L4 L5
9455 5070 904 1069 1069 894 9055 4670 888 950 904 844 9055 4670 888 950 904 844 9055 4670 888 950 904 844
166
( 1400h,1400 ) ( 1700h,1700 )
170
170
80
115
115
4xM10 L20
mounting plane of fixed platen
top plane of fixed platen
36
25
22
16
100
150
400
700
100150400700
350
490
630
770
910
1050
1190
35049063077091010501190
12×Ø38
60×M20 L45
A-A
Ø120
Ø200
8×Ø58
L6
L6
SR15SR15SR10SR10
22 23
VE5500 Ⅱ
5500
900
380
880
1780
970×970
630×630
180
137.2 (14.0)
1400×1400
2250:82/147 3350:111/198 -- --
50 100
9.29×2.44×2.5 9.85×2.44×2.5
31.9 33.6
A B C
55 60 65
21.8 20 18.5
617 735 863
562 668 785
300
56 70 81
54 (5.5)
27.8
1400
160
346 411 483
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400h
250
540 642 754
214 180 153
2140 1800 1530
190 160 136
1900 1600 1360
1400:56/1011400h:76.8/138
50
9.05×2.44×2.5
31.3
A B C
60 65 70
21.6 20 18.6
792 929 1078
720 845 980
250
60 70 85
54 (5.5)
32
1700
160
411 483 560
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700h
250
642 754 875
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700:72/129 1700h:95/168
50
9.05×2.44×2.5
31.4
Technical data VE5500ⅡMachine dimensions VE5500Ⅱ
Platen dimensions VE5500Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
L
718 718 718 718 718 L2 L3 L4 L5642350
720
EF
GH
4815 CBA
D
2293
292
1652
185
13431252.5
67716001800
2242
mounting plane of fixed platen
top plane of fixed platen
840
40
105
140
1120
D
350490630770910105011901330
350
490
630
770
910
1050
1190
1330
15501080700400150100
1000 420-1000
50
I J
12
552476
588
3350 10261 1820 2906 720 1457 308 1927 2758 Ø250 Ø4 2250 9700 1616 2549 720 1457 301 1895 2639 Ø250 Ø4
A B C D E F G H I J L L1 L2 L3 L4 L5
10015 / 908 1000 1010 1018 10015 / 908 1000 1010 1018
1700h, 1700 9276 1528 2333 650 1457 279 2140 2884 Ø250 Ø3
SR15SR15
10015 / 908 1000 1010 1018 SR10
1550
1080
700
400
150
100
120
46
32
28
20
A-A
( 1700h,1700 )
170
170
24 25
Technical data VE6500ⅡMachine dimensions VE6500Ⅱ
Platen dimensions VE6500Ⅱ
unit: mm
unit: mm
Injection pressure
Holding pressure
Injection pressure
Holding pressure
We reserve the right to make changes as a result of further technical advantages.
Mpa
bar
Mpa
bar
Mpa
bar
Mpa
bar
CLAMPING UNIT
Clamping force kN
Toggle stroke mm
Min. mold height mm
Max. mold height mm
Max. mold opening stroke mm
Space between tie bars H×V mm
Min. mold dimension mm
Ejector stroke mm
Ejector force kN (tf)
Mold platen dimension H×V mm
Screw diameter mm
Screw L/D ratio L/D
Injection volume (theoretical) cm3
Injection weight (PS) g
Screw speed rpm
Plasticizing capacity (PS) g/s
Nozzle contact force kN (tf)
Heating power kW
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
INJECTION UNIT
Injection speed mm/s
Injection rate (PS) g/s
OTHERS
Connection power kW/A
Hopper capacity l
Machine dimension m
Machine weight t
A B C A B C
65 70 80 75 80 90
21.5 20 17.5 21.3 20 17.8
1068 1239 1619 1634 1860 2354
972 1127 1473 1487 1693 2142
210 185
60 80 105 80 90 110
63.7(6.5) 63.7(6.5)
38 42
2250 3350 160 160
483 560 731 643 731 926
210 180 138 205 180 142
2100 1800 1380 2050 1800 1420
190 162 124 185 162 128
1900 1620 1240 1850 1620 1280
-- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
-- -- -- -- -- --
VE6500Ⅱ6500
1000
420
1000
2000
1080×1080
700×700
200
196(20.0)
1550×1550
2250:82/147 3350:111/198 -- --
9.7×2.58×2.64 10.3×2.58×2.76
40 42.3
A B C
60 65 70
21.6 20 18.6
792 929 1078
720 845 980
250
60 70 85
54(5.5)
32
1700
160
411 483 560
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700h 250
642 754 875
210 180 155
2100 1800 1550
187 160 138
1870 1600 1380
1700:72/129 1700h:95/168
9.3×2.58×2.88
38
26 27
Platen Layout VE400Ⅱ Platen Layout VE600ⅡEuropean version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
24
14
14
11
A-A
24×M12 L25
140210280350420
140
210
280
350
Ø60
Ø100 L20
24×M12 L25
140210280350420
140
210
280
350
Ø100
177.8
Ø60
Ø101.6 L20
2×Ø32
152.
425
435
5.6
152.4254
355.6406.4
32× / ”-13UNC×1“12
Ø101.6
152.
425
435
5.6
152.4254
355.6406.4
32× / ”-13UNC×1“12
100150200250300350400
100
150
200
250
300
350
52×M12 L25
Ø60
100150200250300350400
100
150
200
250
300
350
52×M12 L25
Ø60
30
19
18
14
A-A
Ø80
4XØ30
Ø177.8
Ø100 L20
140210280350420490
140
210
280
350
420
28×M16 L35
Ø100
140210280350420490
140
210
280
350
420
28×M16 L35
Ø101.6
Ø177.8
4×Ø30
152.
425
435
5.6
431.
8
152.4254
355.6431.8
44× / ”-11UNC×1 / “58
14
Ø101.6
152.
425
435
5.6
431.
8
152.4254
355.6431.8
44× / ”-11UNC×1 / “58
14
100150200250300350400
100
150
200
250
300
350
400
Ø100
Ø2004×Ø30
60×M16 L35
100150200250300350400
100
150
200
250
300
350
400
Ø100
60×M16 L35
30
19
18
14
A-A
140
210
280
350
420
490
140210280350420490
60×M16 L35
Ø125
140
210
280
350
420
490
140210280350420490
60×M16 L35
Ø80
4XØ30
Ø177.8
Ø125 L20
Ø101.6
Ø177.84×Ø30
152.4254
355.6457.2
152.
425
435
5.6
457.
2
44× / ”-11UNC×1 / “58
14
Ø101.6
152.4254
355.6457.2
152.
425
435
5.6
457.
2
44× / ”-11UNC×1 / “58
14
60×M16 L35
Ø2004×Ø30
150250350450500
150
250
350
450
500
Ø100
60×M16 L35
150250350450500
150
250
350
450
500
Ø100
28 29
Platen Layout VE900Ⅱ Platen Layout VE1200ⅡEuropean version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
30
19
18
14
A-A
32×M16 L35
140
210
350
420
490
560
140210350420490560
Ø125
32×M16 L35
140
210
350
420
490
560
140210350420490560
Ø100
4XØ30
Ø177.8
Ø125 L20
52× / ”-11UNC×1 / “58
14
Ø101.6
Ø177.8
4×Ø30
152.
425
435
5.6
508
152.4254
355.6508
52× / ”-11UNC×1 / “58
14
Ø101.6 152.
425
435
5.6
508
152.4254
355.6508
Ø100
Ø200
4×Ø32
72×M16 L35
150250350450500
150
250
350
450
500
Ø100
72×M16 L35
150250350450500
150
250
350
450
500
140
280
350
420
490
560
630
140280350420490560630
48×M16 L35
30
19
18
14
A-A
140
280
350
420
490
560
630
140280350420490560630
48×M16 L35
Ø160
Ø100
Ø177.8
Ø160 L20
4XØ32
64× / ”-11UNC×1 / “58
14
8×Ø32
Ø101.6
Ø177.8
152.
425
435
5.6
508
660.
4
254
406.4
152.4
101.
6
355.6508
660.4
64× / ”-11UNC×1 / “58
14
Ø101.6
152.
425
435
5.6
508
660.
4
254152.4
355.6508
660.4
4×Ø32
68×M16 L35
Ø100
Ø200
150250350500650
150
250
350
500
600
68×M16 L35
Ø100
150250350500650
150
250
350
500
600
30 31
Platen Layout VE1500Ⅱ Platen Layout VE1900ⅡEuropean version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
30
19
18
14
140
280
420
560
700
140280
406.4
420560700
40×M16 L35
A-A
8×Ø38
101.
6
140
280
420
560
700
140280420560700
40×M16 L35
Ø160
Ø100
Ø177.8
Ø160 L20
101.
6
406.4
355.6254
152.4
508660.4
355.
625
415
2.4
508
660.
4
8×Ø40
68× / ”-11UNC×1 / “
Ø101.6
Ø177.8
58
14
355.6254
152.4
508660.4
355.
625
415
2.4
508
660.
4
68× / ”-11UNC×1 / “
Ø101.6
58
14
40072×M16 L35
Ø200
Ø100
8×Ø40
100
150250350500650
150
250
350
500
650
72×M16 L35
Ø120
150250350500650
150
250
350
500
650
406.4
406.
410
1.6
101.6
140
280
420
560
700
140280420560700
12×Ø38
36×M20 L45
140
280
420
560
700
140280420560700
36×M20 L45
Ø160
36
25
22
16
A-A
Ø100
Ø177.8
Ø160 L20
68× / ”-10UNC×1 / “34
12
406.4
406.
410
1.6
101.6
12×Ø38
Ø101.6
Ø177.8
152.
425
435
5.6
508
660.
4
152.4254
355.6508
660.4
68× / ”-10UNC×1 / “34
12
Ø101.6
152.
425
435
5.6
508
660.
4
152.4254
355.6508
660.4
100
100400
400
12×Ø38
92×M16 L35
Ø100
Ø200
150250350500650800
150
250
350
500
650
800
92×M16 L35
Ø120
150250350500650800
150
250
350
500
650
800
32 33
Platen Layout VE2300Ⅱ Platen Layout VE3000ⅡEuropean version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
36
25
22
16
101.
640
6.4
101.6406.4
280
420
560
700
840
280420560700840
12×Ø38
28×M20 L45
A-A
280
420
560
700
840
280420560700840
28×M20 L45
Ø160
Ø100
Ø177.8
Ø160 L20
101.
640
6.4
101.6406.4
355.6254
508660.4863.6
355.
625
4
508
660.
486
3.6
12×Ø38
72× / ”-10UNC×1 / “
Ø101.6
Ø177.8
34
12
355.6254
508660.4863.6
355.
625
4
508
660.
486
3.6
72× / ”-10UNC×1 / “
Ø101.6
34
12
100
400
100400
12×Ø38
84×M20 L45
Ø200
150250350500650850
250
350
500
650
850
84×M20 L45
Ø150 Ø120
150250350500650850
250
350
500
650
850
36
25
22
16
101.6
152.
440
6.4
101.6406.4711.2
280
420
560
700
840
980
280420560700840980
4×Ø58
12×Ø38
52×M20 L45
A-A
Ø12028
042
056
070
084
098
0
280420560700840980
52×M20 L45
Ø200 Ø177.8
Ø200 L20
101.
615
2.4
406.
4
101.6406.4711.2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
12×Ø38
112× / ”-10UNC×1 / “
Ø101.6
Ø177.8
4×Ø58
34
12
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
112× / ”-10UNC×1 / “
Ø101.6
34
12
100
150
400
100400700
4×Ø58
12×Ø38
112×M20 L45
Ø200
Ø120
250350500650850
1050
250
350
500
650
850
1050
112×M20 L45
Ø150
250350500650850
1050
250
350
500
650
850
1050
34 35
Platen Layout VE3600Ⅱ Platen Layout VE4500ⅡEuropean version
Fixed platen Movable platenunit: mm European version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm Japanese versionFixed platen Movable platen
unit: mm
36
25
22
16
152.
410
1.6
406.
471
1.2
152.4101.6
406.4711.2
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L40
A-A
Ø120Ø200 L20
Ø177.8
8×Ø5812×Ø38
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L40
Ø200
101.
615
2.4
406.
471
1.2
101.6152.4406.4711.2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
12×Ø38
100× / ”-10UNC×1 / “
Ø101.6
Ø177.8
8×Ø583
41
2
355.6254
508660.4863.61066.8
355.
625
4
508
660.
486
3.6
1066
.8
100× / ”-10UNC×1 / “
Ø101.6
34
12
12×Ø38
88×M20 L45
Ø120
Ø200
8×Ø58
150350500650
700400150100
700
400
150
100
8501050
150
350
500
650
850
1050
88×M20 L45
Ø150
1503505006508501050
150
350
500
650
850
1050
36
25
22
16
152.
4101
.6
406.
471
1.2
152.4101.6
406.4711.2
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L45
A-A
Ø120Ø200 L20
8×Ø5812×Ø38
280
420
560
700
840
980
1120
2804205607008409801120
60×M20 L45
Ø200 Ø177.8
101.
615
2.4
406.
471
1.2
101.6152.4406.4711.2
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
12×Ø38
120× / ”-10UNC×1 / “
Ø101.6
Ø177.8
8×Ø58
34
12
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
120× / ”-10UNC×1 / “
Ø101.6
34
12
100150400700
100
150
400
700
12×Ø38
Ø120
Ø200
8×Ø58
150350500650850
10501250
150
350
500
650
850
1050
1250
128×M20 L45
Ø150
150350500650850
10501250
150
350
500
650
850
1050
1250
128×M20 L45
36 37
Platen Layout VE5500ⅡEuropean version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
Platen Layout VE6500ⅡEuropean version
Fixed platen Movable platenunit: mm
American versionFixed platen Movable platen
unit: mm
Japanese versionFixed platen Movable platen
unit: mm
152.4 101.6
406.4711.2
152.
410
1.6
406.
471
1.2
280420560700840980112012601400
280
420
560
700
840
980
1120
1260
1400
92×M24 L55
64
32
82
20
A-A
8×Ø58
12×Ø38
92×M24 L55
Ø250
280420560700840980112012601400
280
420
560
700
840
980
1120
1260
1400
Ø120
Ø250 L20
Ø177.8
100
150
400
700
15035050065085010501250
150
350
500
650
850
1050
1250
148xM42 L55
15035050065085010501250
Ø150 150
350
500
650
850
1050
1250
100150400700
Ø120
Ø200
148×M24 L55
12×Ø38
8×Ø58
101.6
152.
440
6.4
711.
2
101.6152.4
406.4711.2
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
140×1”-8UNC×2“
Ø127
355.6254
508660.4863.61066.81270
355.
625
4
508
660.
486
3.6
1066
.812
70
140×1”-8UNC×2“
Ø127
Ø177.8
12×Ø38
8×Ø58
www.zhafir.com
www.zhafir.com
38 39
Standard Equipment List
Injection Unit
» Abrasion-resistant screw unit (open nozzle)
» Nozzle safety guard
» 6 injection steps
» 4 pressure holding steps
» 3 dosing steps
» 3 back pressure steps
» Screw suck back select (after holding/after dosing)
» Screw suck back delay function
» Injection delay function
» Dosing delay function
» Intrusion/filling by rotating screw
» V/P switch over mode
(position, time, pressure, speed)
» Injection speed response mode select
» Injection pressure segment control
» Speed limit during holding pressure
» Screw postion setting (unit: 0.01mm)
» Screw rotation speed setting
» Holding pressure time setting
» Mold open available during dosing
» Barrel heating closed-loop control
(K/J type available)
» Barrel temperature holding function
» Barrel temperature auto tunning function
» Barrel pre-heating function
» Barrel temperature synchronous control
» Material overheating prevention function
» Screw cold start prevention
» Auto purge function
» Screw rotation speed display
» Setting for nozzle movement (switch/time)
» Selection of nozzle retract (3 modes)
» Nozzle contact device
» Nozzle centre adjustable
» Feeding throat temperature closed-loop control
» Injection unit swiveling device
» Independent nozzle temperature control
Clamping unit
» 6 mold moving steps
» Mold safety protection
» Mold setup mode
» Injection compression function
» Clamping force pre-release during cooling
» Injection during clamping (pre-injection)
» 2 step mold close/clamp process
» In mold cut function (ejector activate when mold closed)
» Clamping safety device (mechanical and electrical)
» Adjustable moving platen support
» Clamping force setting
» Ejector device
» Ejector function deactivatable
» 3 ejector steps
» Ejector forward delay function
» Ejector vibration function
» Ejector A/B function (2 steps ejector stroke)
» Eject on the fly
» Ejector plate return signal confirmation
» Cooling water distributor
(6 sets up to 1500 II, 8 sets for others)
» Embedded locating ring (fixed platen)
» In mold ejector pin protection interface
» Mold installation mode (low speed mold move)
» Needle shut off nozzle interface
(one spare electrical interface)
» Emergency stop (operating and non-operating sides)
» Robot mounting layout
» Central lubrication system
» S-curve flexible control for mold movement
Controller & Monitor
» 15 inch TFT color touch screen
» Mold profile data memory (up to 200 sets)
» Alarm history
» Data setting record
» 3 USB R/W interface
» Injection pressure and speed curve display and record
» Euromap 12 robot interface
» Multi-language available
(Chinese, German, English, Japanese etc.)
» Metric/Imperial unit select
» I/O monitor display
» Printer interface(USB connector)
» Production cycle monitor
» Production profile monitor
» Production data record
(5000 cycles display, 100,000 cycles record)
» Production data graphics
» Quality parameters tolerance setting
» Quality abnormal alarm
» Cycle counter
» Machine overview display
» Main data setting fast access
» Machine maintenance administration
» Clamping force curve display
» Barrel temperature monitor
» Display cycle time sequences in each phase
» 3 Color alarm lamp(red/yellow/green)
» Alarm buzzer
» Injection overfill prevention (HPM)
» Display of actual performance data
» Multi-action selectable during machine alarm
Others
» Standard Zhafir color
» Adjustable machine pads
» 3 Power sockets (two 16A and one 32A)
» Standard hopper
» Mold clamper
» T-screw nuts (for T-slot use)
» Hopper slide movement support
» Tools box
» Spare parts
» Machine cover
www.zhafir.com
www.zhafir.com
40 41
Options List
Injection Unit
» Chrome-plating screw unit
» Corrosion and abrasion resistant screw unit
» High performance nozzle heating band
» Extended nozzle
» V/P switch based on in-mold pressure
» Needle shut off nozzle
» Spring nozzle
» Nozzle head customization
» Stainless steel hopper
Clamping unit
» Air blow
» Pneumatic ejector
» Hydraulic power pack (For core and valve gate)
» Hydraulic core interface (Programable)
» Pneumatic core interface (Programable)
» Valve Gate control interface
» Glass tube water flowmeter
» Customized mold platen
(T-slot,threaded holes)
» Mold unscrew electrical interface
» Mold height extension
» Mold slide block protection interface
» Eject compression function
» Mold auto clamp device (Pneumatic/hydraulic)
» Ejector unit with brake
» Intergrated hot runner controller
» Product drop plate
» Automatic safety gate on operator side
» Clamping force automatically controller
» Quality flap
» Product drop detector
Controller & Monitor
» Mold temperature display and control
» Quality flap interface
» Heating disconnect detection function
» Additional cooling water distributor
» External transformer
» Euromap 67 robot interface
» Gas-assisted injection interface
» Magnetic platen interface
» Mold cavity pressure detection interface
Others
» Safty certification: CE,UL
» Infrared barrel heating band
» Barrel heating insulation cover
42 43
www.zhafir.com
www.zhafir.com