Summary

I designed two belt buckles. They use the same mechanism but they lookdifferent, so you can choose the one you like most. One is for 23mm widestrap and the other 28mm. You can scale them a bit at the x-axis if yourstrap has different dimensions. If you need a significantly different sizedon't hesitated to ask.

Instructions: For axle just use filament (1.75). Also place a small elasticpiece in the small recess. You can use a piece PE protective foam that youcan find in many packages.

Stamos

Belt Buckles

VIEW IN BROWSER

updated 25. 10. 2019 | published 25. 10. 2019

3D M

ODEL

ONLY

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

147.4 KBupdated 23. 10. 2019

https://youtu.be/nKleEu4KXMY

Fashion > Other Fashion Accessories

buckle belt

buckle-v2-wedge.stl

210.3 KBupdated 23. 10. 2019

118.6 KBupdated 23. 10. 2019

171.9 KBupdated 23. 10. 2019

129.2 KBupdated 23. 10. 2019

223.9 KBupdated 23. 10. 2019

The Author has not uploaded any G-codes.Try to search in User G-codes section or generate and upload yourown.

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed

buckle-v1-main.stl

buckle-v2-top.stl

buckle-v2-main.stl

buckle-v1-top.stl

buckle-v1-wedge.stl

✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition