Post on 26-Feb-2021
RELIABLE PERFORMANCE GRADE ENGINES
XR SINGLE CYLINDER HORIZONTAL ENGINES127cc - 420cc
POWER PERFORMANCE RELIABILITY
ENGINE TECHNICAL INFORMATIONPOWER PERFORMANCE RELIABILITY
SINGLE CYLINDER OHV ENGINES
KEY FEATURES
EASY STARTING
• Optimized carburetion system, high energy ignition coil and mechanical compression release valve make the XR engines easy to start in different operating conditions.
LOW FUEL CONSUMPTION
• Overhead valve technology and advanced designed combustion chamber provides exceptional fuel efficiency and consistent power.
RELIABLE AND DURABLE
• Cast iron sleeve, forged crankshaft and dual ball bearings improve engine strength and make XR engines more reliable and durable.
OVERHEAD VALVE (OHV) ENGINE DESIGN
• The advanced Overhead Valve technology improves the intake/ exhaust flow and combustion efficiency, which result in delivering higher horse power and lower fuel consumption.
CARTRIDGE AIR CLEANER WITH STANDARD PRE-CLEANER
• The high mount cartridge style air cleaner provides the first line of defence against the destructive effects of dirt ingestion. The XR engines feature a high capacity element and pre-cleaner which ensures maximum protection. With tool-less access, air cleaner serviceability is made even easier. For generator applications, the optional low mount flat panel style air cleaner is available.
LO-TONE MUFFLER
• Featuring the Briggs & Stratton Lo-Tone™ Muffler technology, the XR range is not only quiet, but also provides a high quality of sound. Deflectors and spark arrestors are also available as optional features.
ENVIRONMENTALLY FRIENDLY
• The XR engine range complies with the most stringent emissions regulations in the world.
XR550
2000
2200
2400
2600
2800
3000
3200
3400
3600
GROSS TORQUE*
4.00
4.50
5.00
5.50
6.00lb-ftNm
5.42
5.92
6.42
6.92
7.42
7.92
RPM
FUEL CONSUMPTION IN LITRES PER HOUR**
LOAD: FULL LITRES: 1,26
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
XR750
FUEL CONSUMPTION IN LITRES PER HOUR**
LOAD: FULL LITRES: 1,79
2000
2200
2400
2600
2800
3000
3200
3400
3600
GROSS TORQUE*
6.00
6.50
7.00
7.50
8.00lb-ftNm
RPM
8.14
8.64
9.14
9.64
10.14
10.64
Briggs & Stratton XR horizontal shaft engines are tough, reliable and efficient. Feature for feature, they offer you the best value available for the residential and semi-professional segments you serve. Whether it’s a garden tiller, a log splitter, pressure washer, water pump, or a portable generator, our XR engines provide easy starting, consistent performance, and the durability you can count on when it matters most.
XR950 XR2100
2000
2200
2400
2600
2800
3000
3200
3400
3600
GROSS TORQUE*
8.00
8.50
9.00
9.50
10.00lb-ftNm
10.85
11.35
11.85
12.35
12.85
13.35
RPM
2000
2200
2400
2600
2800
3000
3200
3400
3600
GROSS TORQUE*
18.50
19.00
19.50
20.00
21.00
20.50
21.50lb-ftNm
RPM
25.09
25.59
26.09
26.59
27.59
29.09
28.59
28.09
27.09
FUEL CONSUMPTION IN LITRES PER HOUR**
LOAD: FULL LITRES: 1,98
FUEL CONSUMPTION IN LITRES PER HOUR**
LOAD: FULL LITRES: 3,99
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
POWER PERFORMANCE RELIABILITY
ENGINE TECHNICAL INFORMATION
XR1450
LOAD: FULL LITRES: 2,93
2000
2200
2400
2600
2800
3000
3200
3400
3600
GROSS TORQUE*
12.00
12.50
13.00
13.50
14.50
14.00
15.00lb-ftNm
RPM
16.27
16.77
17.27
17.77
18.77
20.27
19.77
19.27
18.27
» Various crankshafts for application
» 12V electric starter (306cc & 420cc)
» Remote throttle control
» Metric flange mount
» SAE flange mount
» Engine speed (2800 - 4200RPM)
» Fixed Speed (3150 or 3750RPM)
» Spark plug cover - EMC compliant
» 2.6mm extended rope (127cc & 163cc)
» Oil bath air cleaner
» Various rewind position
» Deflector for different outlet direction
» 10Amp Alternator (306cc & 420cc)
» EPA PHASE 3 emission and evaporation certificate
» Low oil sensor
» Panel air cleaner
» 6:1 PTO (127cc)
» Spark arrestor
» Muffler/wire guard
FACTORY OPTIONS
SINGLE CYLINDER, 4-STROKE, AIR COOLED, OHV (OVERHEAD VALVE)
25T2
28,5*
420
CAST IRON SLEEVE
90,0 X 66,0
6,6
1,1
31,0
LO-TONE™ MUFFLER, DUAL BALL BEARING,
FORGED IRON CRANKSHAFT
ELECTRIC START 12V STARTER
10 AMP ALTERNATOR
ENGINE TYPE
MODEL NUMBER
GROSS TORQUE (NM)
@ 2’600 RPM
DISPLACEMENT (CC)
CYLINDER
BORE & STROKE (MM)
FUEL TANK CAPACITY (L)
OIL CAPACITY (L)
DRY WEIGHT (KG)
FEATURES
OPTIONAL
ENGINE TYPE
MODEL NUMBER
GROSS TORQUE (NM)
@ 2’600 RPM
DISPLACEMENT (CC)
CYLINDER
BORE & STROKE (MM)
FUEL TANK CAPACITY (L)
OIL CAPACITY (L)
DRY WEIGHT (KG)
FEATURES
OPTIONAL
SINGLE CYLINDER, 4-STROKE, AIR COOLED, OHV (OVERHEAD VALVE)
130G
12,9*
208
CAST IRON SLEEVE
68,3 X 55,9
3,1
0,6
16,0
LO-TONE™ MUFFLER, DUAL BALL BEARING,
FORGED IRON CRANKSHAFT
OIL BATH AIR CLEANER 2:1 GEAR REDUCTION 6:1 GEAR REDUCTION
12V STARTER (1.5A & 3A) ULTRA LOW MOUNT AIR CLEANER
SINGLE CYLINDER, 4-STROKE, AIR COOLED, OHV (OVERHEAD VALVE)
1062
10,2*
163
CAST IRON SLEEVE
68,0 X 45,0
3,1
0,6
15,5
LO-TONE™ MUFFLER, DUAL BALL BEARING,
FORGED IRON CRANKSHAFT
OIL BATH AIR CLEANER
SINGLE CYLINDER, 4-STROKE, AIR COOLED, OHV (OVERHEAD VALVE)
0831
7,5*
127
CAST IRON SLEEVE
62,0 X 42,0
2,0
0,6
14,0
LO-TONE™ MUFFLER, DUAL BALL BEARING,
FORGED IRON CRANKSHAFT
6:1 GEAR REDUCTION
SINGLE CYLINDER, 4-STROKE, AIR COOLED, OHV (OVERHEAD VALVE)
19N1
20,0*
306
CAST IRON SLEEVE
82,0 X 58,0
5,3
1,1
25,0
LO-TONE™ MUFFLER, DUAL BALL BEARING,
FORGED IRON CRANKSHAFT
ELECTRIC START 12V STARTER
10 AMP ALTERNATOR
* All torque levels are stated gross Nm per SAE J1940 as rated by Briggs & Stratton. ** (Load @ 2’600 rpm). Fuel consumption is depending on engine configuration, application and operating conditions.
POWER PERFORMANCE RELIABILITY
ENGINE SPECIFICATION
Briggs & Stratton has a policy of continuous product improvement and reserves the right to modify its specifications at any time and without prior notice. © 2016 Briggs & Stratton Corporation. All rights reserved.
BRIGGS & STRATTON AG
WOLLERAUSTRASSE 41 8807 FREIENBACH, SWITZERLAND TEL: +41 (0)55 415 1200 FAX: +41 (0)55 415 1201 WWW.BRIGGSANDSTRATTON.COM