www.simtekfence.comwww.simtekfence.com

SimTek Fence

Abou

t Us

Founded in 2007, SimTek Fence has reinvented fence manufacturing with its patented design of rotationally-molded fencing allowing realistic stone appearance and superior performance. We are one of the fastest growing fence manufacturer in the United States

Pate

nted

Con

stru

ction

Every panel and post is manufactured by using rotational mold technology.

Pate

nted

Con

stru

ction

Our fence system is made with proprietary Linear Low Density Polyethylene Plastic (LLDPE) and is reinforced with galvanized steel.

17 High Strength gauge 1 ½” squared galvanized

steel tube

Supe

rior W

ind

Load

Rati

ng

SimTek Fence has been engineered to meet and exceed the wind load requirements for Miami-Dade County for hurricane force wind loads.

- 110 mph sustained wind loads with a maximum burst of 130 mph.

SimTek FenceEx

celle

nt S

ound

Bar

rier

SimTek fence blocks 98% of direct sound

Our Sound Transmission Class Rating is (STC) is 26

Fade

Res

ista

nt

SimTek fence contains UV-12 inhibitors that allows the plastic to maintain its original granite color.

The fence will not fade or ever change colors.

our new √ green

(formula)

Gre

ener

Sol

ution

SimTek Fence uses more than 200,000 lbs. of recycled polyethylene plastic.

No trees are cut down for the purpose of manufacturing our fence.

We recycle, regrind, and reuse all our polyethylene – we produce no waste or plastic scrap.

Were possible, we use recycled packaging materials

Our fence is 100% recyclable.

+ Rotomolding =

Easy

Inst

alla

tion

Step 1: Dig holes 10” to 12” in diameter and about 30” to 36” deep in the ground.

Step 2: Attach the support bracket in the groove of the post at 73 ½”.

Easy

Inst

alla

tion

Step 3: Set post in concrete and use metal stiffener to space from post-to-post.

Step 4: Make sure that post is plumb and evenly spaced.

Metal Stiffener

Easy

Inst

alla

tion

Step 5: Once the concrete cures, panels can be installed by sliding them in the channel of the post.

Cutti

ng P

anel

sStep 6:

Panels can be cut to any desired length. a.Remove steel stiffeners from panel. Determine the exact width between post grooves. Mark and cut stiffeners with a metal blade. b.Cut the panel to the stiffener width minus ½” to allow for thermal expansion and contraction.

Easy

Inst

alla

tion

Step 7: Install caps over the post. Caps are pressure fitted.

Recommendation:Panels are universal with no front or back and no top or bottom edge. Randomly installing panels gives the most pleasing aesthetic effect.

Stai

r Ste

ppin

g Pa

nels

Stai

r Ste

ppin

g Pa

nels

Conc

rete

Sur

face

Mou

nts SimTek can be installed

on top of a 8” minimum width poured concrete wall or on a flat surface by using our mounting brackets.

EcoS

tone

Col

ors

Eco Dark Brown Eco Brown

Eco Beige Eco Grey

Pro-

Line

Col

ors Brown Beige Grey

Black Desert White

6’ HighRe

side

ntial

Pro

ject

s

3’ High with OrnamentalRe

side

ntial

Pro

ject

s

Great Around Swimming PoolsRe

side

ntial

Pro

ject

s

Home Owner’s Associations (HOA)

HO

A Pr

ojec

ts

6’ HighCo

mm

erci

al P

roje

cts

8’ HighCo

mm

erci

al/I

ndus

tria

l Pro

ject

s