Post on 04-Feb-2021
OP22-1 Series Air Operated Single Spool Tipping Valve - 160lpm 4.1
OP22 Series Air Operated Dual Spool Tipping Valve - 160lpm 4.3
OPAPV Series Air Pilot Operated Hose Burst Valve - 200lpm 4.5
DTCA130 Series Air Operated Single Spool Tipping Valve - 130lpm 4.6
DTCA200 Series Air Operated Single Spool Tipping Valve - 200lpm 4.7
DTCA200H2V Series Single Spool Valve with 2 Descent Speeds - 200lpm 4.8
DTCA250 Series Air Operated Single Spool Tipping Valve - 250lpm 4.9
DTCA2502P Series Single Spool Valve with 2 Pressure Ranges - 250lpm 4.10
DTE40 Series 12V & 24V Electrical Operated Tipping Valve - 40lpm 4.11
DC3V*AP Series Air Operated Diverter - 250lpm 4.12
MB3 Monoblock 45lpm Valve 4.13
MB5 Monoblock 80lpm Valve 4.15
MB6 Monoblock 120lpm Valve 4.17
Inline Valves - Lever Diverters - Pilot Check Valves 4.19
Inline Valves - Flow Control Valves 4.20
Inline Valves - Relief Valves 4.21
VALVES
4.0
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESOP22-1 Series – 160 l/min - Air Operated
Air Operated Single Spool Three Position Control Valve.
A single spool valve is for operatinga single tipper hoist when operatedby air cabin control. The OP22-1valve is casted and manufactured inAustralia by Oilpath. The valve has aflow 160 l/min and is designed withlarge internal tank galleries for lowpressure drop.
Features:• Proportional operation• Adjustable Relief• Pressure Switch Port• 1” BSPP service ports & 1 ¼” BSPP
tank port• Manual Handle option available• Slow Lowering option available
4.1
1800 022 831www.heavyhydraulics.com.au
Flow rate (l/min) 160
Max working pressure bar 245
Spool Hard Chromed Plated
Port sizes (BSPP) Service 1"
Port sizes (BSPP) Tank Port 1 1/4"
Air port size G1/8"
Air pressure requiremnet 90 PSI
Weight (kg) 7 kg
Main Data
TIPPING VALVESOP22-1 Series – 160 l/min - Air Operated
SCHEMATIC
Refer ABCD Control brochure for more details
4.2
1800 022 831www.heavyhydraulics.com.au
Air Operated Dual Spool Three Position Control Valve.
The dual valve is for operating twotipping hoists for Truck & Dog or ‘B’Double systems. The OP22 valve iscasted and manufactured inAustralia by Oilpath. The valve has aflow 160 l/min and is designed withlarge internal tank galleries for lowpressure drop.
TIPPING VALVESOP22 Series – 160 l/min - Air Operated
Features:• Proportional operation• Adjustable Relief• Pressure Switch Port option• 1” BSPP service ports & 1 ¼” BSPP
tank port• Manual Handle option available• Slow Lowering option available
4.3
1800 022 831www.heavyhydraulics.com.au
Flow rate (l/min) 160
Max working pressure bar 245
Spool Hard Chromed Plated
Port sizes (BSPP) Service 1"
Port sizes (BSPP) Tank Port 1 1/4"
Air port size G1/8"
Air pressure requiremnet 90 PSI
Weight (kg) 15 kg
Main Data
TIPPING VALVESOP22 Series – 160 l/min - Air Operated
SCHEMATIC
Refer ABCD Control brochure for more details
4.4
1800 022 831www.heavyhydraulics.com.au
HOIST BLOCKING VALVEOPAPV Series – 200 l/min - Air Pilot Operated
4.5
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESDTCA130 Series – 130 l/min - Air Operated
Maximum pressure (bar) 350
Operating pressure (bar) 300
Flow rate (l/min) 130
Weight (kg) 5.2
Main Data
Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three
bolts with a max. tightening torque of 20 Nm. (soft tightening).
4.6
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESDTCA200 Series – 200 l/min - Air Operated
Maximum pressure (bar) 300
Operating pressure (bar) 250
Flow rate (l/min) 200
Weight (kg) 5.2
Main Data
Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three
bolts with a max. tightening torque of 20 Nm. (soft tightening).
4.7
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESDTCA200H2V Series – 200 l/min - 2 Descent Speeds
Maximum pressure (bar) 300
Operating pressure (bar) 250
Flow rate (l/min) 200
Weight (kg) 6
Main Data
Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Screw the three bolts with a max. tightening torque of 20 Nm. (soft tightening).
4.8
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESDTCA250 Series – 250 l/min – Air Operated
Maximum pressure (bar) 350
Operating pressure (bar) 300
Flow rate (l/min) 250
Weight (kg) 6
Main Data
Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three
bolts with a max. tightening torque of 20 Nm. (soft tightening).
4.9
1800 022 831www.heavyhydraulics.com.au
TIPPING VALVESDTCA2502P Series – 250 l/min - 2 Pressure Ranges
Maximum pressure (bar) 350
Operating pressure (bar) 300
Flow rate (l/min) 250
Weight (kg) 6
Main Data
Notes:❖ This tipping valve can be used in progressive descent with our air commands ABCD.❖ Tighten the tipping valve with only three bolts. Do not use the "D" hole. Screw the three
bolts with a max. tightening torque of 20 Nm. (soft tightening).
4.10
1800 022 831www.heavyhydraulics.com.au
Maximum pressure (bar) 350
Operating pressure (bar) 300
Flow rate (l/min) 40
Weight (kg) 2.3
Electrovalve Supply (V) 12 or 24 VDC
Main Data
TIPPING VALVESDTE40 Series – 40 l/min, 12 or 24V Electric Operated
4.11
1800 022 831www.heavyhydraulics.com.au
DIVERTER VALVEDC3V*AP Series – 250 l/min - Air Operated
Maximum pressure (bar) 400
Operating pressure (bar) 430
Flow rate (l/min) 250
Air Pressure (bar) 4.5 - 12
Weight (kg) 2.7
Porting (BSPP) 1"
X - Air Line Port (BSPP) R1/8"
Main Data
4.12
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB3 Series – 45 lpm
4.13
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB3 Series – 45 lpm
4.14
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB5 Series – 80 lpm
4.15
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB5 Series – 80 lpm
4.16
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB6 Series – 120 lpm
4.17
1800 022 831www.heavyhydraulics.com.au
MONOBLOCK VALVESMB6 Series – 120 lpm
4.18
1800 022 831www.heavyhydraulics.com.au
INLINE VALVES
4.19
1800 022 831www.heavyhydraulics.com.au
INLINE VALVES
4.20
1800 022 831www.heavyhydraulics.com.au
OPAPV Series – 200 l/min - Air Pilot Operated INLINE VALVES
4.21
1800 022 831www.heavyhydraulics.com.au