DESIGN REVIEW, EVALUATION, and FEEDBACK• Tracking and Controlling to TPMs• Tracking of Other Design

Considerations• Conducting Design Reviews INCORPORATING DESIGN CHANGES

What is…..

Tracking and Controlling TPMs

TPMs- Are set of measures that provides the supplier and acquirer with insight into progress to plan of the technical solution.

What is…..

TPMs

Tracking and Controlling TPMs

- Are set of measures that provides the supplier and acquirer with insight into progress to plan of the technical solution.

Tracking and Controlling TPMsWhat is…..

Tracking and Controlling TPMsWhat is…..

Attribute- determine how well a system or system element is satisfying or expected to satisfy a technical requirement or goal.

Tracking and Controlling TPMs example

• When a loaf of bread is finished baking, its

internal temperature should be 200°F• To reach this internal

temperature, commercial bakeries bake the loaf at 445°F

Solar Oven

Tracking of Other Design Considerations As the designer evolves through the detail design and

development process, including the conduct of the essential trade-off analyses leading to the selection of specific components, he/she must be cognizant of considerations other than the obvious TPMs.

Conducting Design Reviews1. Identifications of the items to be reviewed2. A selected date for the review.3. An agenda for the review.4. A design review board representing the

organizational elements and disciplines.

Tracking of Other Design Considerations As the designer evolves through the detail design and

development process, including the conduct of the essential trade-off analyses leading to the selection of specific components, he/she must be cognizant of considerations other than the obvious TPMs.

Conducting Design Reviews6. Equipment and/or software requirements for the review.7. Design data requirements for the review.8. Funding requirements.9. Reporting requirements and the mechanism for accomplishing the follow-up actions.

Incorporating Design Changes

After a baseline has been established as a result of a formal design review, changes are frequently initiated for any one of a number of reasons such as correct design deficiency, improve a product, incorporate a new technology, improve the level of sustainability, respond to a change in operational requirements, vompensate for an obsolete component..

Configuration Control Board

- Each proposed change must be thoroughly evaluated in terms of its impact on other elements of the system, the specified TPMs, life cycle cost, and the various considerations.

THANK YOU!