Post on 03-Apr-2018
7/28/2019 Starting Overview (English)
1/12
Overview of
Engine Starting Systems
from IPU Group
7/28/2019 Starting Overview (English)
2/12
IPU Starting Division
Custom starting solutions for most
makes and sizes of diesel engines
Guaranteed starting for generators,engines and fire pumps in
any conditions
Starting solutions for the world's
biggest oil and gas developments
Approved to PED, ATEX and all
international marine classifications
2
7/28/2019 Starting Overview (English)
3/12
Product range
IPU Starting Division design, manufacture, assemble and
distribute a comprehensive range of engine starting solutions,
which include: Air starter motors
Air starting packages
Spring starters
Hydraulic starting packages
Nitrogen starting packages
3
7/28/2019 Starting Overview (English)
4/12
4
Air starter motors
For all diesel engines
Pre-engaged or inertia
models
5 to 30 bar pressure ranges
Integrated relay valve
Lubrication free
ATEX certified
7/28/2019 Starting Overview (English)
5/12
5
Air startingpackages
Suitable for air starter motor
applications and direct on
head starting
Standard or custom built
solutions including air
starter, compressors,
air receivers, control panelsand if required, installation
and on-site commissioning
7/28/2019 Starting Overview (English)
6/12
6
Spring starters
Suitable for engines up to12 litres
Simple alternative or back-up
start system for most
applications
Easy and reliable bolt-on
starter
7/28/2019 Starting Overview (English)
7/12
7
Hydraulic starting packages Suitable for engines up to 100 litres
Compact, primary or secondary starting
Ideal black start system
Effective in any environment
Operates in sub-zero temperatures
7/28/2019 Starting Overview (English)
8/12
8
Nitrogen startingpackages
Suitable for engines up to320 litres
Compact primary or
secondary starting using
exchangeable gas bottles
Hazardous area applications
Long cranking cycles from a
compact system
7/28/2019 Starting Overview (English)
9/12
9
The Starting Team
Jon CheethamGlobal Account Manager
Office: +33 (0) 2 54 72 63 00
Mobile: +44 (0) 7825 944 050Email: jon.cheetham@ipu.co.uk
Wenkui LiaoBusiness Development Executive
Office: +44 (0) 121 511 0459
Fax: +44 (0) 121 511 0402
Mobile: +44 (0) 7826 872610
Email: wenkui.liao@ipu.co.uk
David CaddickDivisional Director
Office: +44 (0) 121 511 0400
Fax: +44 (0) 121 511 0402Mobile: +44 (0) 7831 582978
Email: david.caddick@ipu.co.uk
Ren SowaldSales Account Manager
Office: +31 (0) 316 844220
Fax: +44 (0) 121 511 0402
Mobile: +44 (0) 7825 944 048
Email: rene.sowald@ipu.co.uk
Bally BahiaInternal Sales & Customer Support
Office: +44 (0) 121 511 0400
Fax: +44 (0) 121 511 0402
Email: bally.bahia@ipu.co.uk
Kat DekeusterStarting Administrator
Office: +44 (0) 121 511 0400
Fax: +44 (0) 121 511 0402
Email: kat.dekeuster@ipu.co.uk
7/28/2019 Starting Overview (English)
10/12
10
Case study - Hydraulic Start - Sakhalin IslandAPPLICATION: Offshore
LOCATION: Sakhalin Island (Russia)
ENGINE: Caterpillar 3512 (Diesel)
SOLUTION:
This hydraulic solution was designed as a secondary start unit for a CAT 3512 engine installed at the Russian mainland
export terminal. During the winter, ambient temperature can be as low as -40C. As a consequence, equipment
operating in this hostile environment needs to be capable of withstanding and performing at this extreme temperature.
The system configuration comprises two separate hydraulic start packs each with a capacity for three start attempts.
In manufacture all hydraulic components were fitted with low temperature seals, accumulators were fitted with low
temperature bladders and a special Arctic grade oil selected to cover the wide variations of temperature to be
experienced. Component such as gauges, pressure transmitters and valves were carefully selected with this
temperature in mind. IPU Starting prepared all documentation for the GOST technical passport necessary for each
system.
For more information contact a member of our Starting Sales Team on+44 (0) 121 511 0400
7/28/2019 Starting Overview (English)
11/12
11
Case study - Air Start Packages - PearlAPPLICATION: GTL development
LOCATION: Middle East
ENGINE: Caterpillar 3616
SOLUTION:
This starting system, for a major international GTL development in the Middle East, is one of the largest air packages
IPU Starting has designed and assembled. The complete system comprised two stainless steel 1900 litre, ASME VIII
Div. 1 and U stamped air receivers, storing air at 30 bar to start a CAT 3616 diesel driven emergency generator. The
design featured a duty electric compressor and diesel driven standby compressor. All pipe work, valves and fittings in
stainless steel and all instrumentation and electric components to Zone 2.
For more information contact a member of our Starting Sales Team on+44 (0) 121 511 0400
7/28/2019 Starting Overview (English)
12/12
Visit our Group website www.ipu.co.uk
IPU Group, Churchbridge, Oldbury,West Midlands, B69 2AS England
T: +44 (0) 121 511 0400 F: +44 (0) 121 511 0401E: ipu@ipu.co.uk www.ipu.co.uk
IPU Group May 2009
About IPU GroupIPU Group is a single source partner providing high-quality engineering solutions for diesel
and gas engines, which include starting solutions, control & monitoring, silencing, heating andfiltration for almost any marine, industrial and offshore engine application around the world.
As a company we are passionate about raising standards and delivering exceptional service for
the benefit of customers.
OUR MISSION is to be the company you WANT to do business with
2008/372