Post on 11-Aug-2020
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 5
All dimensions shown are in inches (millimeters) unless otherwise specified .
High-Performance, Readily Available
Laird Technologies standard board level shields and contacts offer readily available, low-cost EMI shield and contact alternatives to custom designed solutions . A variety of sizes and designs are available to choose from, so finding a product that delivers the desired results for a project is easy . Modifications are an option if the standard product does not fully fit space requirement constraints .
Laird Technologies standard shields and contacts are available in a range of material choices, and all allow for full solderability . Standard shield offerings incorporate proprietary design criteria for maximum performance and are available in one-piece and two-piece designs . Laird Technologies standard contacts base materials include beryllium copper, phosphor bronze, nickel and stainless steel . Many plating options are offered for maximum electrical current carrying performance .
Front View97-860 and 97-866
25 ft. (7,6 m)
Typical Mounting Configuration
Flat Cover
Mounting Pin
Standard Strip
Solder Tab
Spring Finger
.115 Dia. (2,92)Clearance
Front View 97-870
.300 (7,62)
.300 (7,62).020 (0,51)
25 ft. (7,6 m)
Side View Nominal Cover Thickness-Any
Conductive Material
Mount Hole
Centerline
C
A
B
D
E
Other heights and custom-designed cover configurations available . Consult sales department .
PC SHIELD DIMENSIONS
.200 (5,08)Typ.
PRINTED CIRCUIT BOARD SHIELDS
97-860
97-866
97-870Patent No. 4,754,101
SERIES A B C D EAPPROX . LENGTH FT (M)
97-860 .520 (13,2)
.045 (1,1)
.120 (3,2)
.030 (0,8)
.400 (10,2)
25 (7,6)
97-866 .820 (20,8)
.045 (1,1)
.120 (3,2)
.030 (0,8)
.700 (17,8)
25 (7,6)
97-8701 .120 (28,4) .045
(1,1) .120 (3,2)
.030 (0,8)
1 .00 (25,4)
25 (7,6)