Board Level Shields and Contacts - Digi-Key Sheets/Laird...BOARD LEVEL SHIELDS AND CONTACTS Laird...
Transcript of Board Level Shields and Contacts - Digi-Key Sheets/Laird...BOARD LEVEL SHIELDS AND CONTACTS Laird...
www.lairdtech.com
| Board Level Shieldsand Contacts
global solutions :local support ª
www.lairdtech.com
www.lairdtech.com
global solutions :local support ™
Laird Technologies is the world-leader in the design and supply of customized performance-critical products for wireless and other advanced electronic applications. Laird Technologies partners with its customers to help find solutions for applications in various industries such as:
Network Equipment
Telecommunications
Data Communications
Automotive Electronics
Computers
Aerospace
Military
Medical Equipment
Consumer Electronics
Laird Technologies offers its customers unique product solutions, dedication to research and development and a seamless network of manufacturing and customer support facilities located all across the globe.
INTRODUCTION TO BOARD LEVEL SHIELDS AND CONTACTS
Board Level Shields and Contacts . . . . . . . . . . . . . . . . . . . . . . 2Design Engineering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Prototyped Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Packaging Automation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2Quality ISO 9001:2000 Certified . . . . . . . . . . . . . . . . . . . . . . 2RoHS Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
STANDARD DESIGN SHIELDS AND CONTACTS97-2000 Shields (Series 97-2000) . . . . . . . . . . . . . . . . . . . . . 3Printed Circuit Board Shields (Series 97-860, 866, 870) . . . . . 5Standard Surface Mount Shields One-Piece and Two-Piece . . . . . 6
Part No . BMIS-101 and 201 . . . . . . . . . . . . . . . . . 7 Part No . BMIS-102 and 202 . . . . . . . . . . . . . . . . . 8 Part No . BMIS-103 and 203 . . . . . . . . . . . . . . . . . 9 Part No . BMIS-104 and 204 . . . . . . . . . . . . . . . . 10 Part No . BMIS-105 and 205 . . . . . . . . . . . . . . . . 11 Part No . BMIS-106 and 206 . . . . . . . . . . . . . . . . 12 Part No . BMIS-107 and 207 . . . . . . . . . . . . . . . . 13 Part No . BMIS-208 . . . . . . . . . . . . . . . . . . . . . . . 14 Part No . BMIS-209 . . . . . . . . . . . . . . . . . . . . . . . 14 Part No . BMIS-210 . . . . . . . . . . . . . . . . . . . . . . . 15EZ PeelTM Standard Shields . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Part No . 97-2002 . . . . . . . . . . . . . . . . . . . . . . . . 17 Part No . 97-2003 . . . . . . . . . . . . . . . . . . . . . . . . 17 Part No . 97-2004 . . . . . . . . . . . . . . . . . . . . . . . . 17 Part No . 97-2005 . . . . . . . . . . . . . . . . . . . . . . . . 17Standard Precision Electronic Contacts . . . . . . . . . . . . . . . . 18 Part No . BMIC-001 . . . . . . . . . . . . . . . . . . . . . . . 18 Part No . BMIC-002 . . . . . . . . . . . . . . . . . . . . . . . 18 Part No . BMIC-004 . . . . . . . . . . . . . . . . . . . . . . . 18 Part No . BMIC-006 . . . . . . . . . . . . . . . . . . . . . . . 19 Part No . BMIC-007-01 . . . . . . . . . . . . . . . . . . . . . 19 Part No . BMI-C-010-* . . . . . . . . . . . . . . . . . . . . . 19
CUSTOM DESIGN SHIELDS AND CONTACTSIntroduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20One-Piece Shield Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 20Two-Piece Shield Design . . . . . . . . . . . . . . . . . . . . . . . . . . . 20EZ PeelTM Shield Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21Multi-Compartmental Shield Design . . . . . . . . . . . . . . . . . . 21Drawn Board Level Shields (Series 97-2100) . . . . . . . . . . . . 21Custom Precision Electronic Contacts . . . . . . . . . . . . . . . . . 22
TABLE OF CONTENTS
www.lairdtech.com 1
Products/specifications are subject to change. Please contact Laird Technologies for potential changes in product specifications.
BOARD LEVEL SHIELDS AND CONTACTSLaird Technologies one-piece shields, multi-compartmental shields and precision contacts are designed to maximize performance in a minimum timeframe . Metal electronic components are packaged for surface mount applications suitable for a variety of industries . Laird Technologies expertise is in numerous key divisions to ensure each part optimizes individual applications . Here's how we help you succeed:
DESIGN ENGINEERING
Before contacting a Laird Technologies engineer, determine the right board level shield or contact design for the application . Based upon specifications, Laird Technologies experts will use the latest Pro-Engineering/AutoCAD systems to develop part designs in hours . Drawing upon extensive experience with application engineering, advanced design and materials engineering, Laird Technologies engineers will solve the most complex board level shield and contact problems .
Laird Technologies engineers and technical specialists look beyond the initial component to the entire application . Each engineer will create the ideal finished product at the best value . Example considerations include board layout, EMI shielding requirements and grounding terminations .
FAST TURNAROUND ON PROTOTYPES Accuracy and speed in the prototyping process are crucial in creating a successful product . Laird Technologies staff quickly responds within days with a prototyped part . By manufacturing with precision, the prototype meets the tolerances of a progressive die manufacturing production environment .
If design modifications are necessary, Laird Technologies prototype department is flexible and will address changes without affecting the delivery of the prototyped part . To ensure parts are delivered at optimum performance and meet specifications, all prototyped parts are 100% inspected on critical dimensions .
Laird Technologies also provides pre-production support to help get the production line up and running quickly . Parts designed in pre-production can be supplied while progressive die tools are being produced .
With manufacturing plants throughout North America, Asia and Europe Laird Technologies provides worldwide access to parts and offers the capacity to handle any size job .
PACKAGING AUTOMATION For innovations in packaging and in shield assemblies, a dedicated in-house automation engineering department routinely develops new automation technologies . An array of packaging options is available for shields and contacts, including tape and reel, tray, tube and bulk . Laird Technologies tape and reel packaging allows for the lowest installed cost and is Electronic Industries Association (EIA) 481 compliant . Tape sizes are supplied on 13-inch and15-inch diameter reels . A transparent cover tape allows component verification and inspection without having to remove or handle components .
Two-piece shields, including multi-compartmental shields, are packaged as either assembled or unassembled parts .
Laird Technologies innovative automation engineering allows engineers to design small and complex contacts requiring pick-up zones of 1 mm and weighing less than 0 .01 grams . Custom automation equipment places the miniature contacts into tape pockets quickly and cost effectively . The tape and reel packaged parts are ready for installation onto printed circuit boards using standard pick-and-place equipment .
Vision recognition marks, such as holes and tabs, can orient parts . This eliminates an added step and leads to faster production . Laird Technologies ensures each design has an adequate pick-up area for pick-and-place equipment, without sacrificing performance .
QUALITY-ISO 9001:2000 CERTIFIED
By placing a premium on quality, Laird Technologies has received the highest ratings on major customer qualification audits . Customers continually rank Laird Technologies among one of the top suppliers for quality and performance . The board level shield and contact facilities are ISO 9001:2000 certified by TUV-America Inc .
Built-in quality systems, including Laird Technologies proprietary 100% automated co-planarity inspection for board level shields, ensures rigid standards are met through all stages of operations (design, production, shipping, as well as prompt customer concern resolution) .
Laird Technologies executes real-time, automated SPC on all critical dimensions throughout production . By taking these measurements, quality assurance technicians can make necessary adjustments on the spot to ensure quality parts are on schedule . Maintaining traceability with SPC results for all jobs; captured data includes operator, shift, raw material, job number, work center and more . Additionally, non-contact, automated coordinate measuring machines (CMM) are located throughout Laird Technologies factory floors .
RoHS Statement All products in this catalog, along with all other Board Level Shield products are compliant to the RoHS standards .
INTRODUCTION TO BOARD LEVEL SHIELDS AND CONTACTS
www.lairdtech.com2
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 3
97-2000 SHIELDSRange of Pin and Pad Mounting Styles Maximizes Flexibility
The 97-2000 series allows mounting options including various pin styles for through-hole mounting or pad styles for surface mounting . The frame material forms the walls of the enclosure and the cover is held securely in place by spring force alone . Covers can be easily removed and replaced to provide access to components . Large or small quantities are easily manufactured using automated tooling, short run capabilities or photochemical machining operations .
^ Test performance in accordance with MIL-STD-285 using an aperture the same size
as the 1-3/4" x 2" (44,5 mm x 5,08 mm) PC shield as reference . Measurement below 400 MHz were not possible because of the aperture attenuation .
97-2000 SHIELDS Frame Height and Pin Option
PIN STYLE 1. FIGURE 1.
.130 to 1.000(3,3 to 25,4)Under Cover Height Range
(Consult engineering for irregular hole patterns .)
All dimensions shown are in inches (millimeters) unless otherwise specified .
Through Hole with Standoff
1/2 Pitch+ 0.006
Pitch
1/2 Pitch+ 0.006
Hole Pattern Layout
• 97-2000 frame heights from 0 .130" (3,0 mm) to 1" (25,4 mm), with other heights available upon request • Cover design permits retention even when severe shock or vibration are a consideration; cover designed for easy removal and replacement • Design allows for automated pick-and-place operations • Locking feature on frame guarantees corner joint stability • Variety of pin style options available including a surface mountable style • Pin location can be customized to hole location or a defined pitch • Frames can be hand-formed or supplied formed and with cover assembled • A modified pin style is available for extra retention in through hole application • All parts are treated as custom, so standards exist • RoHS compliant
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com4
PIN STYLE 3.
PIN STYLE 4.
FIGURE 3.
Phantom lines indicate optional L-shaped configuration
All dimensions shown are in inches (millimeters) unless otherwise specified .
PIN STYLE 2. FIGURE 2.
.130 to 1.000(3,3 to 25,4)Under Cover Height Range
.130 to 1.000(3,3 to 25,4)Under Cover Height Range
Any pitch (P) with minimumof .200 (5,08)
.130 to 1.000(3,3 to 25,4)Under Cover Height Range
.130 to 1.000(3,3 to 25,4)Under Cover Height Range
Surface Mount Tab Pitch Selection Placement and Corner Locking Feature
Through Hole Cover DetailStandard cover material thickness 0.010" (0,25 mm) tin plated
phosphor bronze, in coated steel or stainless steel
Type on random locations
Flush Surface Mount
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 5
All dimensions shown are in inches (millimeters) unless otherwise specified .
High-Performance, Readily Available
Laird Technologies standard board level shields and contacts offer readily available, low-cost EMI shield and contact alternatives to custom designed solutions . A variety of sizes and designs are available to choose from, so finding a product that delivers the desired results for a project is easy . Modifications are an option if the standard product does not fully fit space requirement constraints .
Laird Technologies standard shields and contacts are available in a range of material choices, and all allow for full solderability . Standard shield offerings incorporate proprietary design criteria for maximum performance and are available in one-piece and two-piece designs . Laird Technologies standard contacts base materials include beryllium copper, phosphor bronze, nickel and stainless steel . Many plating options are offered for maximum electrical current carrying performance .
Front View97-860 and 97-866
25 ft. (7,6 m)
Typical Mounting Configuration
Flat Cover
Mounting Pin
Standard Strip
Solder Tab
Spring Finger
.115 Dia. (2,92)Clearance
Front View 97-870
.300 (7,62)
.300 (7,62).020 (0,51)
25 ft. (7,6 m)
Side View Nominal Cover Thickness-Any
Conductive Material
Mount Hole
Centerline
C
A
B
D
E
Other heights and custom-designed cover configurations available . Consult sales department .
PC SHIELD DIMENSIONS
.200 (5,08)Typ.
PRINTED CIRCUIT BOARD SHIELDS
97-860
97-866
97-870Patent No. 4,754,101
SERIES A B C D EAPPROX . LENGTH FT (M)
97-860 .520 (13,2)
.045 (1,1)
.120 (3,2)
.030 (0,8)
.400 (10,2)
25 (7,6)
97-866 .820 (20,8)
.045 (1,1)
.120 (3,2)
.030 (0,8)
.700 (17,8)
25 (7,6)
97-8701 .120 (28,4) .045
(1,1) .120 (3,2)
.030 (0,8)
1 .00 (25,4)
25 (7,6)
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com6
STANDARD SURFACE MOUNT SHIELDS ONE-PIECEOff the Shelf, On Spec and On Budget
One-piece standard surface mount shields offer six sides of protection, with the sixth side being the board itself . One-piece designs offer economical shielding protection where access to covered components is not necessary . There are no tooling costs associated with either the one and/or two-piece design .
STANDARD SURFACE MOUNT SHIELDS TWO-PIECEReduce Board Damage From Inspection and Repairs
Two-piece standard surface mount shields offer users the flexibility to inspect or repair shielded components without risking board damage by removing the entire shield or incurring tooling costs . Covers snap on and off with ease, which makes repair of the component under the shield quicker and easier and reduces board re-work . Two-piece shields are available unassembled* and are designed to survive drop, shock and no-rattle tests .
*Pre-assembly is an option . Consult sales .
TYPICAL PROPERTIES & PERFORMANCE - ALL PART NUMBERS
All dimensions shown are in inches (millimeters) unless otherwise specified .
STANDARD ONE-PIECE BOARD LEVEL SHIELDS
PART NUMBER
MAXIMUM OVERALLLENGTH
MAXIMUM OVERAL WIDTH
MAXIMUM OVERALL HEIGHT
CARRIER TAPE
WIDTH
CARRIER TAPE
PITCH
PARTS PER REEL WEIGHT
BMI-S-101 .538 (13,66)
.476 (12,10)
.100 (2,54) 24 mm 20 mm 1000 0 .4 g
BMI-S-102 .650(16,50)
.650 (16,50)
.142(3,60) 32 mm 24 mm 700 0 .7 g
BMI-S-103 1 .032(26,21)
1 .032 (26,21)
.200(5,08) 44 mm 32 mm 300 1 .6 g
BMI-S-104 1 .260(32,00)
1 .260 (32,00)
.236(6,00) 44 mm 36 mm 225 2 .4 g
BMI-S-106 1 .450(36,83)
1 .326 (33,68)
.200(5,08) 56 mm 40 mm 300 2 .4 g
BMI-S-105 1 .500 (38,10)
1 .000 (25,40)
.236(6,00) 56 mm 32 mm 250 2 .5 g
BMI-S-107 1 .747 (44,37)
1 .747 (44,37)
.384(9,75) 56 mm 56 mm 120 6 .5 g
STANDARD TWO-PIECE BOARD LEVEL SHIELD FRAMESPART
NUMBEROVERALL LEGNTH
OVERALL WIDTH
OVERALLHEIGHT
TAPE WIDTH
TAPE PITCH
PARTS PER REEL
BMI-S-201-F .538 (13,66)
.476 (12,10)
.100(2,54) 24 mm 20 mm 1000
BMI-S-202-F .650(16,50)
.650 (16,50)
.142(3,60) 32 mm 24 mm 700
BMI-S-203-F 1 .032(26,21)
1 .032 (26,21)
.200(5,08) 44 mm 32 mm 300
BMI-S-209-F 1 .156 (29,36)
.728 (32,00)
.275 (7,00) 56 mm 28 mm 400
BMI-S-204-F 1 .260(32,00)
1 .260 (32,00)
.236(6,00) 44 mm 36 mm 225
BMI-S-206-F 1 .450 (36,83)
1 .326 (33,68)
.200(5,08) 56 mm 40 mm 300
BMI-S-205-F 1 .500(38,10)
1 .000 (25,40)
.236(6,00) 56 mm 44 mm 250
BMI-S-210-F 1 .732(44,02)
1 .201 (30,50)
.118(3,00) 56 mm 40 mm 450
BMI-S-207-F 1 .747(44,37)
1 .747 (44,37)
.384(9,75) 56 mm 56 mm 120
BMI-S-208-F 1 .559 (39,60)
1 .559 (39,60)
.276 (7,00) 56 mm 48 mm 200
DESIGN PARAMETERS - ALL PART NUMBERS
PROPERTY TEST METHOD RESULT
Co-planarity LTWI-1119 <0,10 mm
Solderability ANSI/JSTD-002 >99%
Solderability MIL-STD-202 Method 208 >99%
Adhesion ASTM B-571 Passes
3 Axis Mechanical Shock LTES-461 Passes
PICK-UP SPOT DIAMETER MATERIAL MATERIAL THICKNESS CARRIER TAPE
MATERIAL
6 mm or greater 0,20 mm CRS Tin 0,20 mm LTIMS-LCB
Cover tape material REEL DIAMETER REEL MATERIAL PACKAGING
LTIMS-PSA
330 mm (101, 102, 103, 104, 201 202 203 204) 381 mm (105, 106, 107,
205, 206, 207, 208, 209, 210)
Plastic EIA-481
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 7
STANDARD SURFACE MOUNT SHIELD ONE-PIECE
APPLICATIONS:• Works exceptionally well in small component areas• 48 VQFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE
APPLICATIONS:• Works exceptionally well in small component areas• 48 VQFP
Dimensions (mm)
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
Footprint
Footprint
Carrier Tape
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-201-F .538 x .476(13,66 x 12,70)
.100 (2,54) 24 mm 20 mm 1000
The cover is ordered as a separate part . The part number is BMI-S-201-C and is packaged in the same quantity as the frame .
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-101 .538 x .476 (13,66 x 12,70)
.100 (2,54) 24 mm 20 mm 1000
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com8
DESIGN SPECIFICATIONS
STANDARD SURFACE MOUNT SHIELD ONE-PIECE PART NO. BMI-S-102
APPLICATIONS:• 48 VQFP• 44, 48 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE PART NO. BMI-S-202
APPLICATIONS:• 48 VQFP• 44, 48 QFP
Dimensions (mm)
DESIGN SPECIFICATIONS
Footprint
Footprint
Carrier Tape
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH PARTS PER REEL
BMI-S-102 .650 x .650 (16,50 x 16,50)
.142 (3,60) 32 mm 24 mm 700
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-202-F .650 x .650 (16,50 x 16,50)
.142 (3,60) 32 mm 24 mm 700
The cover is ordered as a separate part . The part number is BMI-S-202-C and is packaged in the same quantity as the frame .
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 9
STANDARD SURFACE MOUNT SHIELD ONE-PIECE
APPLICATIONS:• 32, 44, 52 pin PLCC• 121, 169 BGA• 48, 100 VQFP• 44, 48, 64, 80 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE
APPLICATIONS:• 32, 44, 52 pin PLCC• 121, 169 BGA• 48, 100 VQFP• 44, 48, 64, 80 QFP
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
Footprint
Footprint
Carrier Tape
Dimensions (mm)
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-103 1 .032 x 1 .032 (26,21 x 26,21)
.200 (5,08) 44 mm 32 mm 300
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-203-F 1 .032 x 1 .032 (26,21 x 26,21)
.200 (5,08) 44 mm 32 mm 300
The cover is ordered as a separate part . The part number is BMI-S-203-C and is packaged in the same quantity as the frame .
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com10
STANDARD SURFACE MOUNT SHIELD ONE-PIECE
APPLICATIONS:• 121, 169, 225 BGA• 32, 44, 52, 68 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE
APPLICATIONS:• 121, 169, 225 BGA• 32, 44, 52, 68 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
Footprint
Dimensions (mm)
Footprint
Carrier Tape
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-104 1 .260 x 1 .260 (32,00 x 32,00)
.236(6,00) 44 mm 36 mm 225
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-204-F 1 .260 x 1 .260 (32,00 x 32,00)
.236 (6,00) 44 mm 36 mm 225
The cover is ordered as a separate part . The part number is BMI-S-204-C and is packaged in the same quantity as the frame .
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 11
STANDARD SURFACE MOUNT SHIELD ONE-PIECE
APPLICATIONS:• 121 BGA• 32, 44, 52 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE PART NO. BMI-S-205
APPLICATIONS:• 121 BGA• 32, 44, 52 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
Dimensions (mm)
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
Footprint
Footprint
Carrier Tape
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-105 1 .500 x 1 .000 (38,10 x 25,40)
.236 (6,00) 56 mm 32 mm 250
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-205-F 1 .500 x 1 .000 (38,10 x 25,40)
.236 (6,00) 56 mm 44 mm 250
The cover is ordered as a separate part . The part number is BMI-S-205-C and is packaged in the same quantity as the frame .
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com12
STANDARD SURFACE MOUNT SHIELD ONE-PIECE PART NO. BMI-S-106
APPLICATIONS:• 121, 169, 225 BGA• 32, 44, 52, 68 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE PART NO. BMI-S-206
APPLICATIONS:• 121, 169, 225 BGA• 32, 44, 52, 68 PLCC• 48, 100 VQFP• 44, 48, 64, 80, 100 QFP
Dimensions (mm)
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
Footprint
Footprint
Carrier Tape
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-106 1 .450 x 1 .326 (36,83 x 33,68)
.200 (5,08) 56 mm 40 mm 300
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-206-F 1 .450 x 1 .326 (36,83 x 33,68)
.200 (5,08) 56 mm 40 mm 300
The cover is ordered as a separate part . The part number is BMI-S-206-C and is packaged in the same quantity as the frame .
www.lairdtech.com 13
STANDARD DESIGN SHIELDS AND CONTACTS
STANDARD SURFACE MOUNT SHIELDONE-PIECE BMI-S-107
APPLICATIONS:• Supplied in 56 mm EIA standard carrier tape• 121, 169, 225, 313 BGA• 32, 44, 52, 68, 84 PLCC• 48, 100, 208 VQFP• 44, 48, 64, 80, 100, 120, 160 QFP
Dimensions (mm)
STANDARD SURFACE MOUNT SHIELD TWO-PIECE BMI-S-207
Dimensions (mm)
DESIGN SPECIFICATIONS
DESIGN SPECIFICATIONS
APPLICATIONS:• 121, 169, 225, 313 BGA• 32, 44, 52, 68, 84 PLCC• 48, 100, 208 VQFP• 44, 48, 64, 80, 100, 120, 160 QFP
Footprint
Footprint
Carrier Tape
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-107 1 .747 x 1 .747 (44,37 x 44,37)
.384 (9,75) 56 mm 56 mm 120
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-207-F 1 .747 x 1 .747 (44,37 x 44,37)
.384 (9,75) 56 mm 56 mm 120
Carrier Tape
The cover is ordered as a separate part . The part number is BMI-S-207-C and is packaged in the same quantity as the frame .
www.lairdtech.com14
STANDARD DESIGN SHIELDS AND CONTACTS
STANDARD SURFACE MOUNT SHIELD TWO-PIECE BMI-S-209
Dimensions (mm)
DESIGN SPECIFICATIONS
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-209-F 1 .156 x 0 .728 (29,36 x 18,50)
.275 (7,00) 44 mm 28 mm 400
Footprint
The cover is ordered as a separate part . The part number is BMI-S-209-C and is packaged in the same quantity as the frame .
STANDARD SURFACE MOUNT SHIELD TWO-PIECE BMI-S-208
Dimensions (mm)
DESIGN SPECIFICATIONS
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-208-F 1 .559 x 1 .559 (39,60 x 39,60)
.276 (7,00) 56 mm 48 mm 200
Footprint
The cover is ordered as a separate part . The part number is BMI-S-208-C and is packaged in the same quantity as the frame .
39,60 38,10
19,80
1,50 0,00
0,00
1,
50
19,8
0
38,1
0 39
,60
6,00
0,100,50 TYP
0,00
3,30 6,30
9,30
12,3
015
,30
18,3
021
,30
24,3
027
,30
30,3
0
33,3
036
,30
7,00
40,20
0,00
0,00
40,2
0
1,50 x 2
3 .00
1,00 TYP
40,40
36,30
30,30
28,10
24,3022,10
18,30
34,10
16,10
12,3010,10
6,30
4,10
0,00
0,00
4,10
6,30
10,1
0
12,3
0
16,1
018
,30
22,1
024
,30
28,1
0
34,1
0
30,3
0
36,3
0
40,4
0
R0,25 x 46,00
0,00
1,50
2,50
x 2
13,9
314
,68
15,4
3
26,8
6 x
227
,86
29,3
6
18,5017,00
16,00 x 2
9,25
2,50 x 21,500,00
0,00
2,98
x 2
0,50 TYP
5,73
8,98
x 2
11,7
3
14,9
8 x
2
17,7
3
20,9
8 x
223
,73
26,9
8 x
2
3,00
3,00
19,1016,10
ZX
XZ
0,00
0,00
1,50 x 2
3,00
26,9
626
,96
0,00
4,98
7,18
10,9
813
,18
16,9
8
19,1
8
22,9
8
25,1
8
30,1
6
19,30
13,75
11,55
7,75
5,55
0,00
1,00 TYP
www.lairdtech.com 15
STANDARD SURFACE MOUNT SHIELD TWO-PIECE BMI-S-210DESIGN SPECIFICATIONS
Dimensions (mm)Footprint
PART NUMBER
MAXIMUM OVERALL
DIMENSION
MAXIMUM OVERALL HEIGHT
CARRIER TAPE WIDTH
CARRIER TAPE PITCH
PARTS PER REEL
BMI-S-210-F 1 .732 x 1 .201 (44,00 x 30,50)
.118 (3,00) 56 mm 40 mm 120
The cover is ordered as a separate part . The part number is BMI-S-210-C and is packaged in the same quantity as the frame .
STANDARD DESIGN SHIELDS AND CONTACTS
31,30
2x 28,75
2X 26,55
2X 22,75
2X 20,55
2X 16,752X 14,55
2X 10,752X 8,55
2X 4,752X 2,55
0,00
0,00
2X 3
,30
2X 5
,50
2X 9
,30
2X 1
1,50
2X 1
5,30
2X 1
7,50
2X 2
1,30
2X 2
3,50
2X 2
7,30
2X 2
9,50
2X 3
3,30
2X 3
5,50
2X 3
9,30
2X 4
1,50
44,8
0
1,00 TYP
31,10
28,10
3,00
1,50 x2
0,00
4,30
x2
7,05
10,3
0 x
2
13,0
5
16,3
0 x
2
19,0
5
22,3
0 x
2
25,0
5
28,3
0 x
2
31,0
5
34,3
0 x
2
37,0
5
40,3
0 x
2
2,40
0,00
0,00
0,50 TYP
44,6
0
41,6
0
A B
BA
3,00
27,55 x2
24,30
21,55 x2
18,30
15,55 x2
12,30
9,55 x2
3,55 x26,30
0,00
www.lairdtech.com16
STANDARD DESIGN SHIELDS AND CONTACTS
EZ PEELTM STANDARD SHIELDS
For Quick and Easy Access to Board Level Components
Laird Technologies offers four standard sizes of EZ Peel removable cover board level shields . These patented shields have a solid top, scored to allow peel-off when access to board level components within the shield is required .
The peel-off feature prevents damage to the board and components by eliminating the need for labor intensive de-soldering, which often results in increased scrap . Peeling off the cover is accomplished by using a small starter hole for simple removal . This hand operation requires minimal force using a hook scriber or tweezers .
After repair, replacement or adjustment of internal components, the shield can be resealed using a replacement cover . Laird Technologies offers two replacement cover options: a snap-in cover and a dish cover .
The snap-in cover utilizes a lance and hole design . The replacement cover snaps into place and locks into a lance feature on the frame of the original shield .
The other option is a dish cover that gets soldered into place on the board . The dish shape allows for self-location of the cover for soldering .
Standard EZ Peel board level shields can be packaged in tape and reel formats for easy SMT installation using conventional pick-and-place equipment . The four standard sizes are also available without the EZ Peel (scored) feature .
• Easy removal of scored cover area• Only 1 .5 lbs . force required for cover removal• Simple replacement technique for cover• Used on surface mount or through-hole applications• Shield retains all physical properties after PCMCIA/ JEIDA testing for shock, bending, torque, drop and vibration• CRS 1008/1010 (tin plated) for solderability
• RoHS compliant
Original EZ Peel Board Level Shield
Snap-in Cover Application
^ After removal of scored section and
application of snap-in cover
Dish Cover Application
^ After removal of scored section and application of dish cover
TABLE 1
All dimensions shown are in (inches) millimeters unless otherwise specified .
EZ PEEL SHIELD PART NUMBER
REPLACEMENT LID OPTIONS
SNAP-IN LID NUMBER DISH LID NUMBER
97-2002 97-2007 97-2014
97-2003 97-2006 97-2013
97-2004 Not Available 97-2016
97-2005 97-2008 97-2015
STANDARD DESIGN SHIELDS AND CONTACTS
www.lairdtech.com 17
EZ PEELTM STANDARD SHIELDS PROFILES/DIMENSIONS
Carrier Tape
97-2003
97-2002
97-2005
97-2004
Solder Pad Footprint
All dimensions shown are in (inches) millimeters unless otherwise specified .
EZ Peel Board Level Shields
Right Side
www.lairdtech.com18
STANDARD DESIGN SHIELDS AND CONTACTS
STANDARD PRECISION ELECTRONIC CONTACTSLaird Technologies standard precision electronic contacts ground, carry current and signals and interconnect boards and devices . A wide variety of plating options allow for the maximum electrical current carrying performance . An array of designs in a standard format are ready for production . Installed costs are lower with our tape and reel .
STANDARD PRECISION ELECTRONIC CONTACTS
STANDARD PRECISION ELECTRONIC CONTACTS
STANDARD PRECISION ELECTRONIC CONTACTS
Front View
Top View
Typical Deflection Behavior of BMIC-001, BMIC-004, BMIC-006, and BMIC-007-01
All dimensions shown are in (inches) millimeters unless otherwise specified .
PART NUMBER MATERIAL AVAILABLE
PLATINGSTYPICAL
APPLICATIONS PARTS PER REEL
BMI-C-001 0,10 mm BeCu Gold Grounding,energy carrying 3000
BMI-C-001-SN 0,10 mm BeCu Tin Grounding, energy carrying 3000
CONTACTS MATERIAL AVAILABLE PLATINGS
TYPICAL APPLICATIONS
PARTS PER REEL
BMI-C-002 0,10 mm BeCu Gold Grounding, energy carrying 3500
PART NUMBER MATERIAL AVAILABLE
PLATINGSTYPICAL
APPLICATIONSPARTS
PER REEL
BMI-C-004 0,10 mm BeCu Gold Grounding, energy carrying 1400
BMI-C-004-SN 0,10 mm BeCu TinGrounding,
energy carrying 1400Footprint
5,975,18
30.000o
2,08
4,31
1,52
5,18
3,81
Side View Front View
4,31Footprint
3,66
0,655,73
Material properties are for reference only . Product testing by purchaser is recommended to confirm . Laird Technologies assumes no liability for product failure unless specifically stated in writing .
PART NUMBER MATERIAL AVAILABLE
PLATINGSTYPICAL
APPLICATIONSPARTS
PER REEL
BMI-C-001 0,10 mm BeCu Gold Grounding, energy carrying 3000
BMI-C-001-SN 0,10 mm BeCu Tin Grounding, energy carrying 3000
BMI-C-002 0,10 mm BeCu Gold Grounding, energy carrying 3500
BMI-C-004 0,10 mm BeCu Gold Grounding, energy carrying 1400
BMI-C-004-SN 0,10 mm BeCu Tin Grounding, energy carrying 1400
BMI-C-006 0,10 mm BeCu Tin Grounding, energy carrying 3500
BMI-C-007-01 0,13 mm BeCu Tin Grounding, energy carrying 2300
BMI-C-010-* 0,20 mm Spring Steel Tin Standoff, support 3500 (Var)
STANDARD PRECISION ELECTRONIC CONTACTS MATERIAL VARIATIONS
www.lairdtech.com 19
STANDARD DESIGN SHIELDS AND CONTACTS
PART NO. BMI-C-006 PART NO. BMIC-007-01
PART NO. BMI-C-010-*
On two piece BLS, dimensions shown are the exterior frame dimensions .
ONE PIECE
TWO PIECE
STANDARD SIZED PROTOTYPE PARTSStandard prototype parts are available in select one-piece and two-piece sizes . Pricing based on volume and required prototype methods cost . Parts are manu- factured in the prototype department to production tolerances with lead times typically less than two weeks .
Shields are made from high quality steel for excellent shielding performance across a wide frequency range . The tin plated surface provides excellent solderability and compatibility with lead-free processes . Upon request, part drawings and solder pad layouts are available .
1.50 RO.10 TYP INSIDE
1.00
Front View
2,30
3,20
1,40
2,30
3,30
RO,55X2INSIDE
Side View
1,50
Footprint
2,12
PART NUMBER MATERIAL AVAILABLE
PLATINGSTYPICAL
APPLICATIONSPARTS
PER REEL
BMI-C-006 0,10mm BeCu Tin Grounding, energy carrying 3500
Footprint
PART NUMBER BLS TYPE DIMENSIONS in (mm)
LENGTH WIDTH HEIGHT
LT-BLS-215 two piece 1 .300 (33,02) 1 .065 (27,05) 0 .400 (10,16)
LT-BLS-224 two piece 1 .650 (41,91) 1 .375 (34,93) 0 .400 (10,16)
LT-BLS-216 two piece 1 .770 (44,96) 1 .065 (27,05) 0 .400 (10,16)
LT-BLS-213 two piece 2 .130 (54,10) 1 .065 (27,05) 0 .400 (10,16)
LT-BLS-225 two piece 2 .250 (57,15) 1 .375 (34,93) 0 .400 (10,16)
LT-BLS-219 two piece 2 .756 (70,00) 2 .240 (56,90) 0 .400 (10,16)
LT-BLS-229 two piece 2 .775 (70,49) 1 .685 (42,80) 0 .400 (10,16)
LT-BLS-226 two piece 2 .800 (71,12) 1 .375 (34,93) 0 .400 (10,16)
LT-BLS-227 two piece 3 .375 (85,73) 1 .375 (34,93) 0 .400 (10,16)
PART NUMBER BLS TYPE DIMENSIONS in (mm)
LENGTH WIDTH HEIGHT
LT-BLS-139 one piece BLS 0 .736 (18,70) 0 .575 (14,60) 0 .236 (6,00)
LT-BLS-137 one piece BLS 1 .193 (30,30) 0 .583 (14,80) 0 .236 (6,00)
LT-BLS-138 one piece BLS 1 .193 (30,30) 0 .961 (24,40) 0 .236 (6,00)
LT-BLS-141 one piece BLS 1 .346 (34,20) 0 .575 (14,60) 0 .236 (6,00)
LT-BLS-136 one piece BLS 1 .433 (36,40) 0 .685 (17,40) 0 .236 (6,00)
LT-BLS-143 one piece BLS 1 .551 (39,40) 1 .390 (35,30) 0 .236 (6,00)
CONTACTS MATERIAL AVAILABLE PLATINGS
TYPICAL APPLICATIONS
PARTS PER REEL
BMI-C-010-* 0,20 mm Spring Steel Tin Standoff, support 3500 (Var)
Front View
2,00
Footprint
2,00
Side View
R0,30 C
A
Front View Side View
-1 -2 -3
B
A B C
-0 1 .5 1 .27 1 .80
-1 5 .0 2 .50 1 .27
-2 5 .00 15 .00 1 .27
-3 4 .00 8 .00 1 .27
*
-0
PART NUMBER MATERIAL AVAILABLE
PLATINGS TYPICAL APPLICATIONS PARTS PER REEL
BMI-C-007-01 0,13 mm Tin Grounding, energy carrying 2300
2,86
2,00
2,48
2,00
1,50
1,50
1,00
R0,10 TYP INSIDE
1,77
1,50
3,00
1,80
15,50
5,00
8,50
4,00
www.lairdtech.com20
CUSTOM DESIGN SHIELDS AND CONTACTS
INTRODUCTIONThe complexities of today's electronics pose several design challenges . Resolving EMI needs to be balanced with space, weight and production restraints . When designing a custom shielding solution, beginning in the earliest stages of the application design allows effective elimination of EMI while meeting all specifications .
Laird Technologies board level shielding experts work through all phases of development . From design, rapid prototyping and pre-production through production and automated packaging, Laird Technologies has the experience to help speed a product to market and stay within budget .
To increase manufacturing throughout and reduce costs, Laird Technologies has developed a proprietary in-line production process that includes part for-mation, wash, assembly, inspection and automated packaging .
By integrating quality processes, board level shield quality and performance is ensured from design stage through final packaging . One process is the automated co-planarity inspection system . Laird Technologies replicates the customer application by measuring shields in the same plane as the printed circuit board . This is accomplished without "securing" or "touching" shields, which could throw off measurement and/or deform parts . Laird Technologies measures shields immediately prior to placement into carrier tape at speeds that match automation packing .
Shield base materials include our exclusive Shield-LiteTM, CRS 1008/1010, beryllium copper alloys, nickel-silver alloys, copper-based alloys and spring steels . All shields are fully solderable .
ONE-PIECE SHIELD DESIGNLow Cost/Excellent Effectiveness
Custom surface mount shields are available in both one-piece and two-piece designs . One-piece shields provide six sides of protection, with the sixth side being the board itself . One-piece designs offer economical shielding alternatives where access to covered components for repair is not necessary .
TWO-PIECE SHIELD DESIGNQuick, Easy Repair and Inspection of Covered Components
Two-piece board level shields offer users the flexibility to inspect or repair shielded components without having to risk board damage by removing the entire shield . Covers snap on and off with ease, making repairs quicker and easier, and reducing board re-work . Two-piece shields are available pre-assembled or unassembled . Large locking dimples snap into slots on covers to provide mechanical retention force . Smaller grounding dimples provide electrical grounding for proper shielding and to prevent rattle . Two-piece shields survive drop, shock and no-rattle tests . Here are critical test results:
• Able to withstand acceleration of 4g from 10 Hz to 2000 Hz for three hours in each of three planes as per SAE J1455
• Pass EN 50 155 for railway electrical equipment including vibration test of 30g from 5 Hz to 200 Hz in 3 directions and a shock test with 500 m/s for 11/ms
• Pass standard telecommunications drop tests [6 faces, dropped 1 meter onto concrete floor]
*Other materials may be available, please consult sales .
SURFACE MOUNT SHIELDS MATERIAL VARIATIONS
RAW MATERIAL* THICKNESS in (mm) HEAT TREATMENT PLATING COMMENTS
CRS base box steel 1008/1010
0 .005 to 0 .090 (0,127 to 2,286) No heat treatment Tin Pre-plated
Beryllium-copper alloys
0 .004 to 0 .008 (0,102 to 0,203)
Heat treatable in all temperatures
Tin, palladium, nickel, gold
Pre-tempered & pre-plated
Nickel-silver alloys 0 .004 to 0 .016 (0,102 to 0,406) Stress annealed
Fully solderable (if used with LT
proprietary process)
No plating required for SMT
solderability
Copper-based alloys
0 .004 to 0 .012 (0,102 to 0,305) No heat treatment Tin, palladium,
nickel, goldPre-tempered &
pre-plated
Spring steel 0 .006 to 0 .060 (0,152 to 1,524) Austemper Tin, nickel, black
oxide
Spring properties determined by
application
Phosphor Bronze alloys
0 .004 to 0 .020 (0,100 to 0,510) N/A Tin, palladium,
nickel, goldPre-tempered &
Preplated
Material properties are for reference only . Product testing by purchaser is recommended to confirm . Laird Technologies assumes no liability for product failure unless specifically stated in writing .
www.lairdtech.com 21
CUSTOM DESIGN SHIELDS AND CONTACTS
EZ PEELTM SHIELD DESIGNEconomical Access for Low Incidences of Repairs
In cases where there is a low incidence of repairable circuit defects, access may be needed to shielded components . An economical solution is EZ Peel shields . These one-piece shields feature an easy-to-remove top section that can be peeled back using simple tools for access to components . Built-in flexibility controls the ease of removing the top, and the robust design delivers superior flatness . EZ Peel shields are designed to accept a snap-on cover in the same manner as our two-piece shields, following circuit repair .
DRAWN BOARD LEVEL SHIELDS Seamless Corners Address High-Frequency Leakage
As microprocessor speeds continue to increase, so does the potential for EMI leakage through the smallest apertures in board level shields . Laird Technologies drawn board level shields are designed to provide additional near-field and far-field circuit isolation (attenuation) at higher frequencies by eliminating the apertures found in the corners of traditional board level solutions . Drawn board level shields utilize small ground trace sizes, thereby preserving space on the circuit board .
• Solid corner designs when additional circuit isolation (attenuation) is required at higher frequencies
• Available in custom heights up to .250" (6,4 mm) with length and width dimensions from .300" (7,6 mm) to 2 .0" (50,8 mm)
• Tape and reel packaging provides an economical and automated SMT attachment method
The receive antenna test region from 1 GHz to 10 GHz that defines the Far-Field and
Near-Field is 2 .0" and 0 .190", respectfully, from the transmit antenna . This test is performed for worst case orientation .
Circuit Isolation is a measurement that defines the resultant attenuation level in dB provided by a PCB shield from an initial reference level as defined in Laird test procedure PDA-PRO-027 .
Series 97-2100
Notice: The data set forth in all text, tables, charts, graphs and figures herein are based on samples tested and are not guaranteed for all samples or applications . Such data are intended as guides and do not reflect product specification for any specific part .
MULTI-COMPARTMENTAL SHIELD DESIGNShield Multiple Circuit Groups Save PCB Space and Production Time
Printed circuit boards with multiple circuit groups pose unique design challenges . Shielding these groups separately adversely affects circuit board real estate and increases part count . Multi-compartmental shields allow replacement of three or more single shields with one shield divided into several walled compartments . Installing a single part reduces part count, along with production time through faster pick-and-place speeds . This allows for a reduction the number of parts in inventory, which lowers overhead costs .
Multi-compartmental shields feature internal dividing walls of one material thickness and meet all on-board shield requirements for FCC, VDE, CISPR and CE . These shields are available in two-piece designs, either assembled or unassembled . Our unassembled versions allow for automatic optical inspection prior to cover placement . As in all our shielding offerings, Laird Technologies proprietary process for 100% automatic optical inspection verifies co-planarity including inner walls .
• Available in cold rolled steel, brass, stainless steel and nickel silver
• Molded Compartment Shields and Form-In-Place elastomers can be combined with drawn board level shields to achieve shielding of multiple components with a single part
• Available with an EZ Peel scored cover feature; allows for easy top section removal for component repair and re-sealing
• Ventilation holes as needed for solder outgassing .
CUSTOM DESIGN SHIELDS AND CONTACTS
www.lairdtech.com22
CUSTOM PRECISION ELECTRONIC CONTACTSGain Maximum Electrical and Carrying Performance
From concept to placement, Laird Technologies has the expertise to deliver custom precision surface mount contacts . Using the latest computer simulation techniques, Laird Technologies provides properly designed contacts that ground, carry current and signals, and interconnect boards and devices . Laird Technologies uses basic geometric parameters (length, width, uncompressed height, compressed height, contact force) to conduct Finite Element Analysis (FEA) on your prospective design .
With the FEA results, we can then identify the best design to optimize a product's operational performance . Features are incorporated to provide for placement and soldering of the contact onto the circuit board .
Laird Technologies offers a wide range of plating options to allow for maximum electrical current carrying performance . ^Automated packaging allows for complex and small designs with lower
installed costs .
Contact base materials include beryllium copper, phosphor bronze, nickel and stainless steel . All contacts are fully solderable as required .
CUSTOM PRECISION ELECTRONIC CONTACTS MATERIAL VARIATIONS
Additional material choices are available upon request . Material properties are for reference only . Product testing by purchaser is recommended to confirm . Laird Technologies assumes no liability for product failure unless specifically stated in writing .
TYPE THICKNESS in (mm) HEAT TREATMENT PLATING/COATING COMMENTS
Beryllium Copper Alloys: 17200, 190, 290, 174
.0035 to .080 (0,089 to 2,03) Heat Treatable Tin, palladium, nickel, gold, silver Heat Treated as necessary
Pre-Plated or Post Plated
Phosphor Bronze Alloys: 510, 505, 511, 521, 544
.004 to .090 (0,10 to 2,29) N/A Tin, palladium, nickel, gold, silver Pre-Plated or Post Plated
Copper Alloys: 110, 102, 122, 1093
.006 to .125 (0,15 to 3,18) N/A Tin, palladium, nickel, gold, silver Pre-Plated or Post Plated
Brass Alloys: 260, 210, 220, 226, 230,
240, 268, 350, 353
.004 to .090 (0,10 to 2,29) N/A Tin, palladium, nickel, gold, silver Pre-Plated or Post Plated
Nickel Silver Alloys: 770, 752, 762
.004 to .060 (0,10 to 1,52) N/A Tin, palladium, nickel, gold, silver Solderable in unplated condition
(if used with LT proprietary process)
Spring Steel Alloys: 1050, 1065, 1074, 1095
.008 to .080 (0,20 to 2,03) Austemper Tin, nickel, black oxide Plated after heat treatment
Stainless Steel Alloys: 301, 302, 305, 316, 201, 202
.004 to .090 (0,10 to 2,29) N/A Tin, gold Pre-Plated or Post Plated
Stainless Steel Alloys: 410, 420
.004 to .090 (0,10 to 2,29) Heat Treatable Tin, gold Heat Treated as necessary
Pre-Plated or Post Plated
Titanium Copper .004 to .012 (0,10 to 0,30) N/A Tin, palladium, nickel, gold, silver Heat Treated as necessary
Pre-Plated or Post Plated
Special Alloys: Clad metals .0035 to .080 (0,089 to 2,03) N/A Tin, palladium, nickel, gold, silver, palladium-silver Pre-Plated or Post Plated
Post Plating Thickness as required N/A Tin, nickel, gold, silver, zinc, black oxide, black zinc, phosphate N/A
www.lairdtech.com 23
NOTES
NOTES
www.lairdtech.com24
www.lairdtech.com 25
NOTES
Visit www.lairdtech.com for more information on Laird Technologies engineered EMI, antenna and thermal interface product lines.
NORTH AMERICA
Our USA toll-free telephone number +1.800.843.4556
Chicago, USA1751 Wilkening CourtSchaumburg, IL 60173Phone +1.847.839.6000Fax +1.847.519.9682
Delaware Water Gap, USAShielding WayP.O. Box 650Delaware Water Gap, PA 18327Phone +1.570.424.8510Fax +1.570.424.6213
Reynosa, Mexico Industrial Center #5 Parque Industrial Reynosa Calle Brecha E-99 NORTE Lote 23, Reynosa Tamaulipas 88780 Phone +52-899-921-9000 Fax +52-899-921-9038 San Diego, USA1825 Diamond StreetSan Marcos, CA 92069Phone +1.760.736.7007Fax +1.760.736.7008
San Jose, USA2030 Fortune DriveSuite 100San Jose, CA 95131Phone +1.408.544.9500Fax +1.408.577.0691
St. Louis, USA3481 Rider Trail SouthSt. Louis, MO 63045Phone +1.314.344.9300Fax +1.314.344.9333
EUROPE
Czech RepublicPrumyslova 497462 11 LiberecCzech RepublicPhone +420.48.8575111Fax +420.48.8575303
GermanyAuBere OberaustraBe 2283026Rosenheim, GermanyPhone +49.8031.24600Fax +49.8031.246050
France13-15 rue des Entrepreneurs91560 Crosne, FrancePhone +33.1.69497979Fax +33.1.69497980
United KingdomBirches Industrial EstateEast GrinsteadWest SussexRH19 1XH UKPhone +44.1342.315044Fax +44.1342.312969
ASIA
Kunshan, China28 Huanghe South Road Kunshan Economical & Technical Development Zone Kunshan City, China Phone +86.512.5737-6767 Fax +86.512.5737-6766
Seoul, KoreaA-4th Floor, Woorim Lion's Valley371-28,Gasan-Dong, Gumcheon-Gu,Seoul 153-786 KoreaPhone: +82.2.830.2095Fax: +82.2.830.1945
Shanghai, ChinaBuilding 1, Number 58Hua Ning Road, Lane 4018Shanghai, P.R. China 201108Phone +86.21.6442.8018Fax +86.21.6489.6055
Shenzhen, ChinaNo. 2 Building, 2nd Industry ParkTangxiayong Songgang TownBaoan District, Shenzhen CityGuangdong Province China 518105Phone +86.755.2714.1166Fax +86.755.2714.1199
Singapore750E Chai Chee Road #03-07/08Technopark@Chai CheeSingapore 469005Phone +65.624.38022Fax +65.624.38021
Suzhou, ChinaNo. 228 Tongyuan RoadSuzhou Industry ParkSuzhou, P.R.China 215006Phone +86.512.6252.6590Fax +86.512.6252.7226
Taiwan4F, No. 6Hou-Sheng RoadLuchu, Taoyuan, Taiwan 338Phone +886.33.129292Fax +886.33.129090
Tianjin, ChinaBuilding C3/C4, Hongtai Industrial ParkNo. 87 TaiFeng Road, TEDATianjin, PRC 300457Phone +86.22.6629.8160Fax +86.22.6629.8158
Tokyo, JapanShin Yokohama Business Center Building 7F 2-6, Shin Yokohama 3-chome, Kohoku-kuYokohama-shi, Kanagawa 222-0033, JapanPhone +81.45.4736808Fax +81.45.4736162
Yokohama, Japan2-12-8 Sachiura, Kanazawa-kuYokohama-shi, 236-0003, JapanPhone +81.45.7851063Fax +81.45.7851064
NOTICE: Although the information and recommendations set forth herein (hereinafter "information") are presented in good faith and believed to be correct as of the date hereof, Laird Technologies makes no representation or warranties as to the completeness or accuracy thereof. Information is supplied upon the condition that the persons receiving same will make their own determination as to its suitability for their purposes prior to use. In no event will Laird Technologies be responsible for damages of any nature whatsoever resulting from the use or reliance upon information or the product to which information refers. Nothing contained herein is to be construed as a recommendation to use any product, process, equipment or formulation in conflict with any patent, and Laird Technologies makes no representation or warranty, expressed or implied, that the use thereof will not infringe any patent. The data set forth in all tables, charts, graphs and figures herein are based on samples tested and are not guaranteed for all samples or applications. Such data are intended as guides and do not reflect product specifications for any particular product. NO REPRESENTATION OR WARRANTIES, EITHER EXPRESSED OR IMPLIED, OR MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE ARE MADE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH INFORMATION REFERS.
global solutions :local support ™
BLS-CAT-2007