Post on 27-Jan-2021
www.kus-usa.com
SAP SensorUser's Manual
Step 1:
1www.kus-usa.com
Insert the O-ring into the sensor
2www.kus-usa.com
Step 2:Insert the O-ring into the groove in the aluminum head of the sensor.
3www.kus-usa.com
Step 3:Move the float above the sensor (just above the plastic mesh) and hold it.
4www.kus-usa.com
Step 4:Slowly insert the whole sensor into the tank.
5www.kus-usa.com
Step 5:Insert the O-ring of the sensor into the holder of the fuel tank, then rotate it clockwise with the wrench/fixture for 30°. The assembly is complete.
Since 1984
页 1页 2页 3页 4页 5页 6页 7