Relining a bore_part2

Bore Casing & Screens Pipes & Components Environmental Drilling Water Treatment Safety Products Sand Spears Pumps

How To

Ph 1300 133 000

Check to see if your Bore can be

RelinedWhy have a new bore drilled when you may be able to repair your old bore

Part 2

How To

Ph 1300 133 000

You Have Decided to reline your Bore

How To

Ph 1300 133 000

Then the following will help you

How To

Ph 1300 133 000

Talk to your local Water AuthorityFind out if you need a permit to

repair your water bore.

Step 1

How To

Ph 1300 133 000

Example - Below is a link of requirements for Bores in

Queensland.

http://www.nrm.qld.gov.au/water/management/pdf/waterbore-drillers.pdf

Step 1

How To

Ph 1300 133 000

We do not want you to be illegal

Step 1

How To

Ph 1300 133 000

Gather Information and Inspect your Bore to find out where the problem is, decide if it can be

repaired and the best method of repair.

Step 2

How To

Ph 1300 133 000

Find the original log.If you do not have this, find who the

driller was, that drilled your hole and see if they have a log.

Step 3 Finding Information of Bore

How To

Ph 1300 133 000

Go to your Local water authority and try to get a copy of the log.

There may be a cost for this.

How To

Ph 1300 133 000

The log will tell you Information like.

How To

Ph 1300 133 000

Diameter of the ID of the

Step 3

How To

Ph 1300 133 000

Is it stepped down

anywhere?

Step 3

How To

Ph 1300 133 000

What depth is the casing

Step 3

How To

Ph 1300 133 000

Where is the screen set.

Step 3

How To

Ph 1300 133 000

Is there multiple

screens?

Step 3

How To

Ph 1300 133 000

Screen type.

How To

Ph 1300 133 000

Connection of screen.

How To

Ph 1300 133 000

Water Levels

How To

Ph 1300 133 000

Gravel pack size

How To

Ph 1300 133 000

This information is invaluable in deciding, the design, calculations, materials needed and quantities needed for a complete repair of your bore.

How To

Ph 1300 133 000

If you cannot get or have this information then it is still possible to repair your bore.

How To

Ph 1300 133 000

When Inspecting your boreThe problems to look for are

As follows

How To

Ph 1300 133 000

A build-up of

corrosion

Inside the casing

Step 5 What to Look for

How To

Ph 1300 133 000

Holes in the casing

Step 5 What to Look for

How To

Ph 1300 133 000

The Casing has

Corroded or

Separated

from the screen.

How To

Ph 1300 133 000

There are several ways you can inspect your failed water bore

Step 4

How To

Ph 1300 133 000

1: A torch and a string line

(Depending on Bore dia. and depth)

How To

Ph 1300 133 000

If your bore is shallow enough, and

the diameter of the bore is

large enough, then you may be

able to see the hole in the casing.

How To

Ph 1300 133 000

If the hole is below the water line or to deep

then only a camera inspection will show the

How To

Ph 1300 133 000

2: Camera

Inspection

How To

Ph 1300 133 000

A camera is sent

down into the bore

and a video picture

is sent back to a

screen and

recorder.

How To

Ph 1300 133 000

If the damage is below water

line, then the camera will record

and show you how much

damage has taken place

How To

Ph 1300 133 000

The Camera will also log the

bore and give you depths of

where the damage has taken

place.

How To

Ph 1300 133 000

We Now have the following

Information

How To

Ph 1300 133 000

Depth of the Bore

How To

Ph 1300 133 000

Depth of the Screen

How To

Ph 1300 133 000

What the damage is

How To

Ph 1300 133 000

And where the

damage is

How To

Ph 1300 133 000

It is now a easier decision

to decide what course of

action to take now.

How To

Ph 1300 133 000

3: Steel pipe and

How To

Ph 1300 133 000

The Steel pipe should be the

same diameter as the

new casing to be

inserted.

Picture from www.waterboredevelopers.com.au

How To

Ph 1300 133 000

The Steel pipe is lowered into

the bore on a rope. This is to

achieve a couple of results.

Ph 1300 133 000

1: It will tell us if the bore is

Ph 1300 133 000

2: It will tell us if the new reline

casing will fit all the

way to the bottom.

Ph 1300 133 000

4: It will swipe the build up of

corrosion and may

return it to it’s

original inside diameter.

Picture from www.waterboredevelopers.com.au

Ph 1300 133 000

As this will allow all the

corrosion to fall to the bottom,

the casing will have to be

cleaned out.

Ph 1300 133 000

One way to clean the bore is by

using compressed air.

www.aquaboredrilling.com

How To

Ph 1300 133 000

Now that the bore has

been inspected we will

know the following

How To

Ph 1300 133 000

Depth of the

How To

Ph 1300 133 000

Maximum diameter of

the casing that can be

used in relining your

How To

Ph 1300 133 000

That the Bore is

Straight

How To

Ph 1300 133 000

Decision time ?

How To

Ph 1300 133 000

If the bore is a straight

reline with Pvc screen

down the bottom.

How To

Ph 1300 133 000

And you going to Reline your bore yourself, then go to Part 3 of this presentation.

Go to or Click on Link below

www.deps.com.au/how-to/relining_a_bore_part3

How To

Ph 1300 133 000

How To

Ph 1300 133 000

If the bore is a reline

with a stainless screen

down the bottom.

How To

Ph 1300 133 000

And you going to Reline your bore yourself, then go to Part 4 of this presentation.

Go to or Click on Link below

www.deps.com.au/how-to/relining_a_bore_part4

Thank you for taking the time to look at the information we have created for you,We hope this will be of assistance to solving your piping, drainage and drilling challenges.

If you have any more questionsPlease feel free to contact myself or one of our team

Article

For more Case Studies and Information go to www.deps.com.au

then click onto Handy Linksor contact us on1300 133 000

askus@deps.com.au

Case Study - How to - Articles

Ph 1300 133 000

SlottingCuttingFabricatingPipe TestingPerforationDrawingsSpear PointsSafetyPumpsBore Casing & Screens Pipes & Components Environmental Drilling Water Treatment

Safety Products Sand Spears Pumps

Deps Products & Capabilities

ThreadingTurningWeldingSlitting

DesigningWater

TreatmentPipe

Drilling products

Pipe FittingsPh 1300 133

Ph 1300 133 000

Solving your Piping,

Drilling and Drainage

Challenges

with Trust and Integrity

Relining a bore_part2

Business

Transcript of Relining a bore_part2

Orange County Feeder Relining Project · CMP Congestion Management Program ... OCIWMD Orange County Integrated Waste Management Department ... Orange!County!Feeder!Relining!Project!

Copy of Relining Bp 2008-09 - Final

Consequences of relining on a maxillary complete denture ... · CLINICAL REPORT Consequences of relining on a maxillary complete denture: A clinical report Yung-tsung Hsu, DDS, MS

Relining and Rebasing

2014 PIPE - Trenchless Technology Magazine | #1 ...trenchlesstechnology.com/pdfs/2014-pipe-relining-guide.pdf6 TRENCHLESS TECHNOLOGY SPECIAL SUPPLEMENT PIPE RELINING GUIDE 2014 W elcome

Atlac Premium Relining

relining materials - Zhermack · 2019. 3. 27. · elite soft relining ISTRUZIONI D’USO ELITE SOFT RELINING è una linea di materiali studiati per la preparazione di ribasature morbide

ElastoFlake & ElastoTec - Relining Group · ElastoFlake, a new material from the Relining Group, is a polymer plastic mass intended for injection casting, which was developed especially

Steel Cylinder Relining of PCCP Systems

FLEXIBLE STAINLESS STEEL RELINING PIPEHomeSaver Pro flexible stainless steel relining pipe is intended for use in ... install a liner if the above requirements cannot be met! ... HomeSaver

Lindsay Tilton Regulatory Affairs & Compliance (Consultant ...rebasing resin Denture relining, repairing, or rebasing resin Denture relining, repairing, or rebasing resin Product Code

CD Relining & Rebasing Complete Dentures

2015 PIPE RELINING GUIDE - Trenchless Technology …trenchlesstechnology.com/pdfs/2015-pipe-relining-guide.pdf6 TRENCHLESS TECHNOLOGY SPECIAL SUPPLEMENT Y ou have in your hands the

Relining - de.rosler.com

1994: Relining of Urea Reactors at Plant Site

2015 PIPE RELINING GUIDE - trenchlesstechnology.com › pdfs › 2015-pipe-relining-guide.pdf · Pipe relining is by far the most popular trenchless method. The growth of pipe relining

Relining and rebasing in cd

DW-KL...> Chimney relining systems > Concentric balance flue systems > Shared collective chimney systems CLV > Plastic relining systems > Fan dilution / fan assisted systems > Freestanding

Relining of complete dentures

Relining Prestressed Concrete Cylinder Pipe: A ... · Relining Prestressed Concrete Cylinder Pipe, A Manufacturers Perspective By Greg Smith and Jeff Bruny ... installing cathodic